Re: bug mate-settings-daemon
Mon mail n'arrive pas sur la liste, sans doute a cause du poids des
pieces jointes. Je le renvoie donc sans la piece jointe lourde.
Le résultat de tail -f .xsession-errors > tail-f-xsession-errors.txt
pese 1,6 Mo (ca depend du temps que je met a faire control-C) et il
contiens a l'infini la ligne qui est en 4 exemplaires dans le fichier
tail-n-xsession-errors.txt
Le 30/06/2016 23:49, hamster a écrit :
Le 30/06/2016 22:37, Bernard Schoenacker a écrit :
que donne la commande :
tail -f /var/log/messages
dmesg
tail -f .xsession-errors
tail -n10 .xsession-errors
En pieces jointes.
Je suppose que tu souhaite que je fasse ces commandes pendant un
plantage, mais pour ca il faut que j'attende un plantage.
Bon ben voila, ca a pas trop trainé.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2+deb8u2 (2016-06-25)
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7d37ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f7d3800-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0006fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 0.3 present.
[ 0.000000] DMI: Dell Inc. Latitude D510 /0N8719, BIOS A04 12/27/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f7d3 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 write-through
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[ 0.000000] BRK [0x0179e000, 0x0179ffff] PGTABLE
[ 0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
[ 0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x363f4000-0x371f1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC9B0 000014 (v00 DELL )
[ 0.000000] ACPI: RSDT 0x000000003F7D3FD3 000040 (v01 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: FACP 0x000000003F7D4C00 000074 (v01 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: DSDT 0x000000003F7D5800 0033B3 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000003F7E4000 000040
[ 0.000000] ACPI: APIC 0x000000003F7D5400 000068 (v01 DELL D05 27D50C1B ASL 00000047)
[ 0.000000] ACPI: MCFG 0x000000003F7D53C0 00003E (v16 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: BOOT 0x000000003F7D4FC0 000028 (v01 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: SSDT 0x000000003F7D43E6 00023E (v01 PmRef Cpu0Ist 00003000 INTL 20030522)
[ 0.000000] ACPI: SSDT 0x000000003F7D420E 0001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522)
[ 0.000000] ACPI: SSDT 0x000000003F7D4013 0001FB (v01 PmRef CpuPm 00003000 INTL 20030522)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 129MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x017a2000, 0x017a2fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x3f7d2fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3f7d2fff]
[ 0.000000] On node 0 totalpages: 259953
[ 0.000000] free_area_init_node: node 0, pgdat c165d200, node_mem_map f5c04020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 260 pages used for memmap
[ 0.000000] HighMem zone: 33237 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75db000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258181
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=aed75f73-f52e-48ca-ace8-5782de2eb5c8 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0003f7d3)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1008540K/1039812K available (4610K kernel code, 522K rwdata, 1452K rodata, 660K init, 460K bss, 31272K reserved, 132948K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc1671000 - 0xc1716000 ( 660 kB)
.data : 0xc1480d4c - 0xc166fbc0 (1979 kB)
.text : 0xc1000000 - 0xc1480d4c (4611 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1728.891 MHz processor
[ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.78 BogoMIPS (lpj=6915564)
[ 0.004024] pid_max: default: 32768 minimum: 301
[ 0.004045] ACPI: Core revision 20140424
[ 0.014828] ACPI: All ACPI Tables successfully acquired
[ 0.014871] Security Framework initialized
[ 0.014892] AppArmor: AppArmor disabled by boot time parameter
[ 0.014895] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.014929] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.014933] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015378] Initializing cgroup subsys memory
[ 0.015390] Initializing cgroup subsys devices
[ 0.015405] Initializing cgroup subsys freezer
[ 0.015411] Initializing cgroup subsys net_cls
[ 0.015421] Initializing cgroup subsys blkio
[ 0.015430] Initializing cgroup subsys perf_event
[ 0.015434] Initializing cgroup subsys net_prio
[ 0.015470] Disabled fast string operations
[ 0.015480] mce: CPU supports 5 MCE banks
[ 0.015492] CPU0: Thermal monitoring enabled (TM1)
[ 0.015506] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[ 0.027025] ftrace: allocating 20815 entries in 41 pages
[ 0.036124] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036599] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080903] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.73GHz (fam: 06, model: 0d, stepping: 08)
[ 0.084000] Performance Events: p6 PMU driver.
[ 0.084000] ... version: 0
[ 0.084000] ... bit width: 32
[ 0.084000] ... generic registers: 2
[ 0.084000] ... value mask: 00000000ffffffff
[ 0.084000] ... max period: 000000007fffffff
[ 0.084000] ... fixed-purpose events: 0
[ 0.084000] ... event mask: 0000000000000003
[ 0.084000] x86: Booted up 1 node, 1 CPUs
[ 0.084000] smpboot: Total of 1 processors activated (3457.78 BogoMIPS)
[ 0.084000] devtmpfs: initialized
[ 0.084099] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.086018] pinctrl core: initialized pinctrl subsystem
[ 0.086126] NET: Registered protocol family 16
[ 0.086306] cpuidle: using governor ladder
[ 0.086310] cpuidle: using governor menu
[ 0.086393] ACPI: bus type PCI registered
[ 0.086396] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.086518] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.086522] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.086524] PCI: Using MMCONFIG for extended config space
[ 0.086526] PCI: Using configuration type 1 for base access
[ 0.086541] dmi type 0xB1 record - unknown flag
[ 0.088166] ACPI: Added _OSI(Module Device)
[ 0.088169] ACPI: Added _OSI(Processor Device)
[ 0.088172] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.088174] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.095001] ACPI: Interpreter enabled
[ 0.095017] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.095024] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.095045] ACPI: (supports S0 S3 S4 S5)
[ 0.095047] ACPI: Using IOAPIC for interrupt routing
[ 0.095087] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.111819] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[ 0.116150] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
[ 0.125102] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.125110] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.125118] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.141719] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.141724] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.141727] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.141731] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.141734] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
[ 0.141738] acpi PNP0A03:00: host bridge window [mem 0xf0007000-0xf0007fff] (ignored)
[ 0.141741] acpi PNP0A03:00: host bridge window [mem 0xf000c000-0xfebfffff] (ignored)
[ 0.141745] acpi PNP0A03:00: host bridge window [mem 0xfec10000-0xfed1ffff] (ignored)
[ 0.141749] acpi PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff] (ignored)
[ 0.141752] PCI: root bus 00: using default resources
[ 0.141995] PCI host bridge to bus 0000:00
[ 0.142000] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.142003] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.142007] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.142021] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.142163] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.142177] pci 0000:00:02.0: reg 0x10: [mem 0xdff00000-0xdff7ffff]
[ 0.142184] pci 0000:00:02.0: reg 0x14: [io 0xec38-0xec3f]
[ 0.142191] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.142198] pci 0000:00:02.0: reg 0x1c: [mem 0xdfec0000-0xdfefffff]
[ 0.142328] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.142339] pci 0000:00:02.1: reg 0x10: [mem 0xdff80000-0xdfffffff]
[ 0.142525] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.142583] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
[ 0.142683] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.142760] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.142818] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
[ 0.142916] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.142993] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.143050] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
[ 0.143148] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.143225] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.143283] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
[ 0.143382] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.143471] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.143497] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[ 0.143603] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.143682] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.143763] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.143892] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.143975] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.143997] pci 0000:00:1e.2: reg 0x10: [io 0xed00-0xedff]
[ 0.144013] pci 0000:00:1e.2: reg 0x14: [io 0xec40-0xec7f]
[ 0.144027] pci 0000:00:1e.2: reg 0x18: [mem 0xdfebfe00-0xdfebffff]
[ 0.144040] pci 0000:00:1e.2: reg 0x1c: [mem 0xdfebfd00-0xdfebfdff]
[ 0.144106] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.144243] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.144355] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.144365] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.144372] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.144378] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[ 0.144504] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.144526] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7]
[ 0.144540] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7]
[ 0.144553] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177]
[ 0.144566] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377]
[ 0.144579] pci 0000:00:1f.2: reg 0x20: [io 0xbfa0-0xbfaf]
[ 0.144606] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.144609] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.144613] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.144616] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.144649] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.144891] pci 0000:02:00.0: [14e4:170c] type 00 class 0x020000
[ 0.144914] pci 0000:02:00.0: reg 0x10: [mem 0xdfdfa000-0xdfdfbfff]
[ 0.145009] pci 0000:02:00.0: supports D1 D2
[ 0.145012] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.145116] pci 0000:02:01.0: [104c:8036] type 02 class 0x060700
[ 0.145139] pci 0000:02:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.145184] pci 0000:02:01.0: supports D1 D2
[ 0.145187] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.145300] pci 0000:02:01.2: [104c:8037] type 00 class 0x0c0010
[ 0.145328] pci 0000:02:01.2: reg 0x10: [mem 0xdfdf8800-0xdfdf8fff]
[ 0.145344] pci 0000:02:01.2: reg 0x14: [mem 0xdfdfc000-0xdfdfffff]
[ 0.145452] pci 0000:02:01.2: supports D1 D2
[ 0.145455] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.145573] pci 0000:02:03.0: [8086:4220] type 00 class 0x028000
[ 0.145600] pci 0000:02:03.0: reg 0x10: [mem 0xdfdf9000-0xdfdf9fff]
[ 0.145713] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.145853] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[ 0.145862] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.145871] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.145875] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.145955] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
[ 0.145962] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[ 0.145966] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
[ 0.145972] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[ 0.145977] pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
[ 0.145988] pci_bus 0000:00: on NUMA node 0
[ 0.149771] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.149903] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.150033] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 0.150163] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.150275] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.150391] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.150507] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.152069] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.152270] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.152275] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.152280] vgaarb: loaded
[ 0.152282] vgaarb: bridge control possible 0000:00:02.0
[ 0.152374] PCI: Using ACPI for IRQ routing
[ 0.164028] PCI: pci_cache_line_size set to 64 bytes
[ 0.164084] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.164088] e820: reserve RAM buffer [mem 0x3f7d3800-0x3fffffff]
[ 0.164470] hpet clockevent registered
[ 0.164476] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.164483] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.164488] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.166522] Switched to clocksource hpet
[ 0.174342] pnp: PnP ACPI init
[ 0.174371] ACPI: bus type PNP registered
[ 0.185001] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[ 0.185006] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[ 0.185010] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.185015] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.185019] system 00:00: [mem 0x00100000-0x3f7d37ff] could not be reserved
[ 0.185023] system 00:00: [mem 0x3f7d3800-0x3f7fffff] has been reserved
[ 0.185027] system 00:00: [mem 0x3f800000-0x3fffffff] has been reserved
[ 0.185031] system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
[ 0.185036] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[ 0.185040] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.185044] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.185048] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.185053] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.185057] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.185062] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.185066] system 00:00: [mem 0xf0006000-0xf0006fff] has been reserved
[ 0.185070] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.185074] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.185080] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.185128] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185133] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185184] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.185189] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.185225] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185230] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185234] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185287] system 00:02: [io 0xf400-0xf4fe] has been reserved
[ 0.185291] system 00:02: [io 0x1080-0x10bf] has been reserved
[ 0.185295] system 00:02: [io 0x10c0-0x10df] has been reserved
[ 0.185299] system 00:02: [io 0x10e0-0x10ff] could not be reserved
[ 0.185303] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.185384] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.185451] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.185518] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.185604] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.185608] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.185612] system 00:06: [io 0x0920-0x092f] has been reserved
[ 0.185616] system 00:06: [io 0x0930-0x093f] has been reserved
[ 0.185620] system 00:06: [io 0x0940-0x097f] has been reserved
[ 0.185624] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.190976] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.199623] pnp 00:08: [dma 1]
[ 0.199761] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.201654] pnp: PnP ACPI: found 9 devices
[ 0.201657] ACPI: bus type PNP unregistered
[ 0.201666] PnPBIOS: Disabled by ACPI PNP
[ 0.239287] pci 0000:02:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239291] pci 0000:02:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239297] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
[ 0.239308] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.239319] pci 0000:00:1e.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.239328] pci 0000:02:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.239331] pci 0000:02:01.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.239335] pci 0000:02:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239339] pci 0000:02:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239345] pci 0000:02:01.0: BAR 0: assigned [mem 0x40000000-0x40000fff]
[ 0.239354] pci 0000:02:01.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
[ 0.239360] pci 0000:02:01.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[ 0.239363] pci 0000:02:01.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.239367] pci 0000:02:01.0: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.239371] pci 0000:02:01.0: CardBus bridge to [bus 03-06]
[ 0.239375] pci 0000:02:01.0: bridge window [io 0x2000-0x20ff]
[ 0.239381] pci 0000:02:01.0: bridge window [io 0x2400-0x24ff]
[ 0.239387] pci 0000:02:01.0: bridge window [mem 0x44000000-0x47ffffff pref]
[ 0.239394] pci 0000:02:01.0: bridge window [mem 0x48000000-0x4bffffff]
[ 0.239400] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.239405] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.239412] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.239425] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.239428] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.239432] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.239436] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.239439] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.239442] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.239446] pci_bus 0000:03: resource 0 [io 0x2000-0x20ff]
[ 0.239449] pci_bus 0000:03: resource 1 [io 0x2400-0x24ff]
[ 0.239453] pci_bus 0000:03: resource 2 [mem 0x44000000-0x47ffffff pref]
[ 0.239456] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff]
[ 0.239502] NET: Registered protocol family 2
[ 0.239896] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.239929] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.239989] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.240048] TCP: reno registered
[ 0.240052] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240069] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240157] NET: Registered protocol family 1
[ 0.240186] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.242020] PCI: CLS 64 bytes, default 64
[ 0.242109] Unpacking initramfs...
[ 0.726603] Freeing initrd memory: 14328K (f63f4000 - f71f2000)
[ 0.726738] Simple Boot Flag at 0x79 set to 0x1
[ 0.726916] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 0.727024] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.727493] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.727563] audit: initializing netlink subsys (disabled)
[ 0.727606] audit: type=2000 audit(1467310071.724:1): initialized
[ 0.728186] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.728214] zbud: loaded
[ 0.728310] VFS: Disk quotas dquot_6.5.2
[ 0.728333] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.728428] msgmni has been set to 1738
[ 0.728897] alg: No test for stdrng (krng)
[ 0.728929] bounce: pool size: 64 pages
[ 0.728949] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.729008] io scheduler noop registered
[ 0.729012] io scheduler deadline registered
[ 0.729062] io scheduler cfq registered (default)
[ 0.729224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.729257] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.729300] intel_idle: does not run on family 6 model 13
[ 0.729361] GHES: HEST is not enabled!
[ 0.729398] isapnp: Scanning for PnP cards...
[ 1.083208] isapnp: No Plug & Play device found
[ 1.083325] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.103967] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.104500] Linux agpgart interface v0.103
[ 1.104633] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 1.104657] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.105538] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.105702] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.105955] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.110786] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.110796] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.111002] mousedev: PS/2 mouse device common for all mice
[ 1.111254] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.111290] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.111312] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.112170] TCP: cubic registered
[ 1.112194] NET: Registered protocol family 10
[ 1.112519] mip6: Mobile IPv6
[ 1.112525] NET: Registered protocol family 17
[ 1.112534] mpls_gso: MPLS GSO support
[ 1.112736] Using IPI No-Shortcut mode
[ 1.112909] registered taskstats version 1
[ 1.113361] rtc_cmos 00:05: setting system clock to 2016-06-30 18:07:52 UTC (1467310072)
[ 1.113451] PM: Hibernation image not present or could not be loaded.
[ 1.113793] Freeing unused kernel memory: 660K (c1671000 - c1716000)
[ 1.113842] Write protecting the kernel text: 4612k
[ 1.113891] Write protecting the kernel read-only data: 1456k
[ 1.113893] NX-protecting the kernel data: 3580k
[ 1.116513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.128207] systemd-udevd[55]: starting version 215
[ 1.128604] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.160415] ACPI: bus type USB registered
[ 1.160469] usbcore: registered new interface driver usbfs
[ 1.160491] usbcore: registered new interface driver hub
[ 1.165345] usbcore: registered new device driver usb
[ 1.166132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.166331] ehci-pci: EHCI PCI platform driver
[ 1.166621] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.166632] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.166653] ehci-pci 0000:00:1d.7: debug port 1
[ 1.170566] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.171161] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.171683] ehci-pci 0000:00:1d.7: irq 16, io mem 0xffa80800
[ 1.180028] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.180143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.180147] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180150] usb usb1: Product: EHCI Host Controller
[ 1.180153] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.180156] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.180393] hub 1-0:1.0: USB hub found
[ 1.180407] hub 1-0:1.0: 8 ports detected
[ 1.181273] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.181283] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.181293] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.181318] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 1.181399] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.181402] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.181406] usb usb2: Product: UHCI Host Controller
[ 1.181409] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.181411] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.181590] hub 2-0:1.0: USB hub found
[ 1.181600] hub 2-0:1.0: 2 ports detected
[ 1.181942] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.181950] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.181958] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.181999] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[ 1.182070] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182073] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182076] usb usb3: Product: UHCI Host Controller
[ 1.182079] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.182082] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.182259] hub 3-0:1.0: USB hub found
[ 1.182268] hub 3-0:1.0: 2 ports detected
[ 1.182607] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.182617] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.182626] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.182660] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[ 1.182719] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182723] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182725] usb usb4: Product: UHCI Host Controller
[ 1.182728] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.182731] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.182906] hub 4-0:1.0: USB hub found
[ 1.182916] hub 4-0:1.0: 2 ports detected
[ 1.183254] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.183263] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.183270] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.183304] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[ 1.183364] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.183367] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183370] usb usb5: Product: UHCI Host Controller
[ 1.183373] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.183376] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.183558] hub 5-0:1.0: USB hub found
[ 1.183567] hub 5-0:1.0: 2 ports detected
[ 1.198049] SCSI subsystem initialized
[ 1.207032] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.207038] ACPI: Thermal Zone [THM] (54 C)
[ 1.217400] libata version 3.00 loaded.
[ 1.218715] ahci 0000:00:1f.2: version 3.0
[ 1.218935] ahci 0000:00:1f.2: controller is in combined mode, can't enable AHCI mode
[ 1.219593] ata_piix 0000:00:1f.2: version 2.13
[ 1.219763] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.220094] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[ 1.220103] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.220110] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.220118] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.260158] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 1.260205] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 1.280709] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:14:22:d7:c4:e6
[ 1.316050] firewire_ohci 0000:02:01.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.373588] scsi0 : ata_piix
[ 1.373781] scsi1 : ata_piix
[ 1.373864] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 1.373867] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 1.492023] usb 1-8: new high-speed USB device number 2 using ehci-pci
[ 1.536698] ata1.00: ATA-6: ST960822A, 8.03, max UDMA/100
[ 1.536702] ata1.00: 117210240 sectors, multi 8: LBA48
[ 1.536706] ata1.00: applying bridge limits
[ 1.552591] ata2.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462C, DE01, max UDMA/33
[ 1.552999] ata1.00: configured for UDMA/100
[ 1.553141] scsi 0:0:0:0: Direct-Access ATA ST960822A 8.03 PQ: 0 ANSI: 5
[ 1.584250] ata2.00: configured for UDMA/33
[ 1.585091] scsi 1:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462C DE01 PQ: 0 ANSI: 5
[ 1.598950] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.599025] sd 0:0:0:0: [sda] Write Protect is off
[ 1.599029] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.599059] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.605100] sr0: scsi3-mmc drive: 10x/24x writer cd/rw xa/form2 cdda tray
[ 1.605103] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.605281] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.606781] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.606879] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.626368] usb 1-8: New USB device found, idVendor=05e3, idProduct=0605
[ 1.626374] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.626377] usb 1-8: Product: USB2.0 Hub
[ 1.626841] hub 1-8:1.0: USB hub found
[ 1.627111] hub 1-8:1.0: 4 ports detected
[ 1.630622] sda: sda1 sda2 sda3 sda4
[ 1.631307] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.724023] tsc: Refined TSC clocksource calibration: 1728.999 MHz
[ 1.816188] firewire_core 0000:02:01.2: created device fw0: GUID 394fc00008aa9050, S400
[ 1.900029] usb 1-8.1: new low-speed USB device number 3 using ehci-pci
[ 1.996485] usb 1-8.1: New USB device found, idVendor=046d, idProduct=c016
[ 1.996491] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.996494] usb 1-8.1: Product: Optical USB Mouse
[ 1.996497] usb 1-8.1: Manufacturer: Logitech
[ 1.999162] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.003480] usbcore: registered new interface driver usbhid
[ 2.003483] usbhid: USB HID core driver
[ 2.005552] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.1/1-8.1:1.0/0003:046D:C016.0001/input/input4
[ 2.005748] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-8.1/input0
[ 2.068028] usb 1-8.4: new low-speed USB device number 4 using ehci-pci
[ 2.165358] usb 1-8.4: New USB device found, idVendor=0e8f, idProduct=0020
[ 2.165364] usb 1-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.165367] usb 1-8.4: Product: PS2toUSB Adapter
[ 2.165370] usb 1-8.4: Manufacturer: GASIA
[ 2.171056] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.4/1-8.4:1.0/0003:0E8F:0020.0002/input/input5
[ 2.171542] hid-generic 0003:0E8F:0020.0002: input,hidraw1: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1d.7-8.4/input0
[ 2.181461] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.4/1-8.4:1.1/0003:0E8F:0020.0003/input/input6
[ 2.181648] hid-generic 0003:0E8F:0020.0003: input,hidraw2: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1d.7-8.4/input1
[ 2.197869] PM: Starting manual resume from disk
[ 2.197877] PM: Hibernation image partition 8:1 present
[ 2.197879] PM: Looking for hibernation image.
[ 2.218397] PM: Image not found (code -22)
[ 2.218400] PM: Hibernation image not present or could not be loaded.
[ 2.240213] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input3
[ 2.259231] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[ 2.421976] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.724075] Switched to clocksource tsc
[ 3.645044] random: nonblocking pool is initialized
[ 5.646996] lp: driver loaded but no devices found
[ 5.671961] ppdev: user-space parallel port driver
[ 5.691404] parport_pc 00:08: reported by Plug and Play ACPI
[ 5.691476] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.788146] lp0: using parport0 (interrupt-driven).
[ 5.837747] fuse init (API version 7.23)
[ 5.869749] systemd-udevd[150]: starting version 215
[ 7.531638] tsc: Marking TSC unstable due to TSC halts in idle
[ 7.531663] ACPI: acpi_idle registered with cpuidle
[ 7.536036] Switched to clocksource hpet
[ 7.606923] ACPI: AC Adapter [AC] (on-line)
[ 7.660796] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 7.661367] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 7.664417] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 7.868869] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8
[ 7.869587] ACPI: Lid Switch [LID]
[ 7.869769] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
[ 7.869780] ACPI: Power Button [PBTN]
[ 7.869951] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[ 7.869960] ACPI: Sleep Button [SBTN]
[ 7.967374] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.114436] NET: Registered protocol family 23
[ 8.163474] ACPI: Battery Slot [BAT0] (battery present)
[ 8.163586] ACPI: Battery Slot [BAT1] (battery absent)
[ 8.221794] [drm] Initialized drm 1.1.0 20060810
[ 8.408292] [drm] Memory usable by graphics device = 256M
[ 8.408298] [drm] Replacing VGA console driver
[ 8.409187] Console: switching to colour dummy device 80x25
[ 8.413436] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.413441] [drm] Driver supports precise vblank timestamp query.
[ 8.413541] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.425094] yenta_cardbus 0000:02:01.0: enabling device (0000 -> 0003)
[ 8.425234] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01af]
[ 8.425256] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[ 8.425260] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[ 8.425266] yenta_cardbus 0000:02:01.0: TI: mfunc 0x01001022, devctl 0x64
[ 8.431742] intel_rng: FWH not detected
[ 8.656853] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0c78, PCI irq 19
[ 8.656862] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 8.656866] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 8.656876] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 8.656881] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff:
[ 8.658026] excluding 0x2000-0x20ff 0x2400-0x24ff
[ 8.671162] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xdfd00000-0xdfdfffff]
[ 8.671170] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdfd00000-0xdfdfffff:
[ 8.671183] excluding 0xdfdf0000-0xdfdfffff
[ 8.809556] lib80211: common routines for IEEE802.11 drivers
[ 8.809562] lib80211_crypt: registered algorithm 'NULL'
[ 8.887439] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 8.910362] cfg80211: Calling CRDA to update world regulatory domain
[ 8.915333] [drm] initialized overlay support
[ 8.918715] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 9.163241] libipw: 802.11 data/management/control stack, git-1.1.13
[ 9.163248] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 9.238564] fbcon: inteldrmfb (fb0) is primary device
[ 9.255113] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 9.256741] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 9.256793] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 9.257460] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 9.257496] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 9.258047] clean.
[ 9.258081] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 9.258705] clean.
[ 9.258745] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 9.258784] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xf0000-0xfffff
[ 9.258820] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 9.258857] clean.
[ 9.258891] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 9.258928] clean.
[ 9.258962] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 9.259606] clean.
[ 9.311948] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 9.311950] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 9.312416] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 9.365804] ipw2200 0000:02:03.0: firmware: failed to load ipw2200-bss.fw (-2)
[ 9.365807] ipw2200 0000:02:03.0: Direct firmware load failed with error -2
[ 9.365808] ipw2200 0000:02:03.0: Falling back to user helper
[ 9.370621] ipw2200: Unable to load firmware: -12
[ 9.370799] ipw2200: probe of 0000:02:03.0 failed with error -5
[ 10.160655] cfg80211: World regulatory domain updated:
[ 10.160660] cfg80211: DFS Master region: unset
[ 10.160661] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.160666] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.160670] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.160674] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.160679] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 10.160684] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 10.160689] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.160693] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.160696] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.506981] Console: switching to colour frame buffer device 128x48
[ 10.512066] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.512070] i915 0000:00:02.0: registered panic notifier
[ 10.512087] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.671663] iTCO_vendor_support: vendor-support=0
[ 10.761573] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.761658] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 10.762077] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.182091] Adding 1023996k swap on /dev/sda1. Priority:-1 extents:1 across:1023996k FS
[ 11.340059] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 55309 usecs (2665 samples)
[ 11.340072] snd_intel8x0 0000:00:1e.2: clocking to 48000
[ 12.307174] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.698602] systemd-journald[143]: Received request to flush runtime journal from PID 1
[ 14.666043] RPC: Registered named UNIX socket transport module.
[ 14.666053] RPC: Registered udp transport module.
[ 14.666058] RPC: Registered tcp transport module.
[ 14.666062] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.703690] FS-Cache: Loaded
[ 14.740281] FS-Cache: Netfs 'nfs' registered for caching
[ 14.803080] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 29.680949] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.816212] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[ 32.816220] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[ 32.816321] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 38.422319] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 113.825168] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 115.614965] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1504.312064] usb 1-7: new high-speed USB device number 5 using ehci-pci
[ 1504.446341] usb 1-7: New USB device found, idVendor=1307, idProduct=0165
[ 1504.446351] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1504.446358] usb 1-7: Product: USB Mass Storage Device
[ 1504.446365] usb 1-7: Manufacturer: USBest Technology
[ 1504.446371] usb 1-7: SerialNumber: 00000000000117
[ 1504.540399] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 1504.541199] scsi2 : usb-storage 1-7:1.0
[ 1504.541338] usbcore: registered new interface driver usb-storage
[ 1505.541150] scsi 2:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[ 1505.543864] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1505.545971] sd 2:0:0:0: [sdb] 7897040 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 1505.546946] sd 2:0:0:0: [sdb] Write Protect is off
[ 1505.546956] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1505.550440] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1505.550451] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1505.686270] sdb: sdb1 sdb2
[ 1505.828603] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1506.472491] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1506.499454] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1506.528071] EXT4-fs (sdb2): warning: mounting fs with errors, running e2fsck is recommended
[ 1506.538051] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 1591.686821] usb 1-7: USB disconnect, device number 5
[ 7107.704069] usb 1-5: new high-speed USB device number 6 using ehci-pci
[ 7107.838318] usb 1-5: New USB device found, idVendor=1307, idProduct=0165
[ 7107.838329] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7107.838337] usb 1-5: Product: USB Mass Storage Device
[ 7107.838343] usb 1-5: Manufacturer: USBest Technology
[ 7107.838350] usb 1-5: SerialNumber: 00000000000117
[ 7107.839564] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 7107.841070] scsi3 : usb-storage 1-5:1.0
[ 7108.843607] scsi 3:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[ 7108.846972] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 7108.848554] sd 3:0:0:0: [sdb] 7897040 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 7108.849581] sd 3:0:0:0: [sdb] Write Protect is off
[ 7108.849592] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 7108.851074] sd 3:0:0:0: [sdb] Asking for cache data failed
[ 7108.851084] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 7108.987623] sdb: sdb1 sdb2
[ 7109.131330] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 7110.175335] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 7110.202311] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7110.233106] EXT4-fs (sdb2): warning: mounting fs with errors, running e2fsck is recommended
[ 7110.244049] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 7239.643958] usb 1-5: USB disconnect, device number 6
[ 7847.649827] perf interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[13761.288064] usb 1-7: new high-speed USB device number 7 using ehci-pci
[13761.422251] usb 1-7: New USB device found, idVendor=1307, idProduct=0165
[13761.422262] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13761.422270] usb 1-7: Product: USB Mass Storage Device
[13761.422276] usb 1-7: Manufacturer: USBest Technology
[13761.422283] usb 1-7: SerialNumber: 00000000000117
[13761.423437] usb-storage 1-7:1.0: USB Mass Storage device detected
[13761.428842] scsi4 : usb-storage 1-7:1.0
[13762.430414] scsi 4:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[13762.433952] sd 4:0:0:0: Attached scsi generic sg2 type 0
[13762.434962] sd 4:0:0:0: [sdb] 7897040 512-byte logical blocks: (4.04 GB/3.76 GiB)
[13762.437388] sd 4:0:0:0: [sdb] Write Protect is off
[13762.437397] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
[13762.438119] sd 4:0:0:0: [sdb] Asking for cache data failed
[13762.438127] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[13762.574586] sdb: sdb1 sdb2
[13762.860773] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[13763.720886] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[13763.745128] EXT4-fs (sdb2): warning: mounting fs with errors, running e2fsck is recommended
[13763.770495] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[13763.793690] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[13877.693502] usb 1-7: USB disconnect, device number 7
[13882.956054] usb 1-7: new high-speed USB device number 8 using ehci-pci
[13883.090278] usb 1-7: New USB device found, idVendor=1307, idProduct=0165
[13883.090290] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13883.090297] usb 1-7: Product: USB Mass Storage Device
[13883.090304] usb 1-7: Manufacturer: USBest Technology
[13883.090311] usb 1-7: SerialNumber: 00000000000117
[13883.091368] usb-storage 1-7:1.0: USB Mass Storage device detected
[13883.093027] scsi5 : usb-storage 1-7:1.0
[13884.093085] scsi 5:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[13884.095902] sd 5:0:0:0: Attached scsi generic sg2 type 0
[13884.097496] sd 5:0:0:0: [sdb] 7897040 512-byte logical blocks: (4.04 GB/3.76 GiB)
[13884.099404] sd 5:0:0:0: [sdb] Write Protect is off
[13884.099415] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
[13884.101405] sd 5:0:0:0: [sdb] Asking for cache data failed
[13884.101415] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[13884.236852] sdb: sdb1 sdb2
[13884.380796] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[13884.901522] EXT4-fs (sdb2): warning: mounting fs with errors, running e2fsck is recommended
[13884.911746] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[13885.136106] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[13885.164520] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[14185.440048] EXT4-fs (sdb2): error count since last fsck: 2
[14185.440059] EXT4-fs (sdb2): initial error at time 1465628593: __ext4_get_inode_loc:3958: inode 4141: block 412
[14185.440070] EXT4-fs (sdb2): last error at time 1465628844: __ext4_get_inode_loc:3958: inode 4141: block 412
[15670.584446] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[15670.644907] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
(mate-panel:1859): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
(mate-panel:1859): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
(mate-panel:1859): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
(mate-panel:1859): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
(mate-panel:1859): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
Jun 30 23:59:16 feu org.gtk.Private.UDisks2VolumeMonitor[1839]: index_parse.c:191: indx_parse(): error opening /media/ainara/pocket-nux/BDMV/BACKUP/index.bdmv
Jun 30 23:59:16 feu kernel: [13885.136106] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jun 30 23:59:16 feu kernel: [13885.164520] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jun 30 23:59:16 feu org.gtk.Private.UDisks2VolumeMonitor[1839]: index_parse.c:191: indx_parse(): error opening /media/ainara/fat-16-pock/BDMV/index.bdmv
Jun 30 23:59:16 feu org.gtk.Private.UDisks2VolumeMonitor[1839]: index_parse.c:191: indx_parse(): error opening /media/ainara/fat-16-pock/BDMV/BACKUP/index.bdmv
Jul 1 00:04:16 feu kernel: [14185.440048] EXT4-fs (sdb2): error count since last fsck: 2
Jul 1 00:04:16 feu kernel: [14185.440059] EXT4-fs (sdb2): initial error at time 1465628593: __ext4_get_inode_loc:3958: inode 4141: block 412
Jul 1 00:04:16 feu kernel: [14185.440070] EXT4-fs (sdb2): last error at time 1465628844: __ext4_get_inode_loc:3958: inode 4141: block 412
Jul 1 00:29:01 feu kernel: [15670.584446] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jul 1 00:29:02 feu kernel: [15670.644907] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Reply to: