Re: bug mate-settings-daemon
Le 30/06/2016 22:37, Bernard Schoenacker a écrit :
que donne la commande :
tail -f /var/log/messages
dmesg
tail -f .xsession-errors
tail -n10 .xsession-errors
En pieces jointes.
Je suppose que tu souhaite que je fasse ces commandes pendant un
plantage, mais pour ca il faut que j'attende un plantage. Je ne sais pas
le faire planter a la demande.
cd /home
mv /home/hamster /home/hamster.OLD
mkdir -p hamster
cp /etc/skel/.* /home/hamster
chown -R 1000:1000 hamster
Je vais essayer, mais la aussi je n'ai qu'une méthode pour savoir si ca
améliore ou pas : travailler sur l'ordi un certain temps.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2+deb8u2 (2016-06-25)
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7d37ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f7d3800-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0006fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 0.3 present.
[ 0.000000] DMI: Dell Inc. Latitude D510 /0N8719, BIOS A04 12/27/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f7d3 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 write-through
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[ 0.000000] BRK [0x0179e000, 0x0179ffff] PGTABLE
[ 0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
[ 0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x363f4000-0x371f1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC9B0 000014 (v00 DELL )
[ 0.000000] ACPI: RSDT 0x000000003F7D3FD3 000040 (v01 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: FACP 0x000000003F7D4C00 000074 (v01 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: DSDT 0x000000003F7D5800 0033B3 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000003F7E4000 000040
[ 0.000000] ACPI: APIC 0x000000003F7D5400 000068 (v01 DELL D05 27D50C1B ASL 00000047)
[ 0.000000] ACPI: MCFG 0x000000003F7D53C0 00003E (v16 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: BOOT 0x000000003F7D4FC0 000028 (v01 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: SSDT 0x000000003F7D43E6 00023E (v01 PmRef Cpu0Ist 00003000 INTL 20030522)
[ 0.000000] ACPI: SSDT 0x000000003F7D420E 0001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522)
[ 0.000000] ACPI: SSDT 0x000000003F7D4013 0001FB (v01 PmRef CpuPm 00003000 INTL 20030522)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 129MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x017a2000, 0x017a2fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x3f7d2fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3f7d2fff]
[ 0.000000] On node 0 totalpages: 259953
[ 0.000000] free_area_init_node: node 0, pgdat c165d200, node_mem_map f5c04020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 260 pages used for memmap
[ 0.000000] HighMem zone: 33237 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75db000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258181
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=aed75f73-f52e-48ca-ace8-5782de2eb5c8 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0003f7d3)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1008540K/1039812K available (4610K kernel code, 522K rwdata, 1452K rodata, 660K init, 460K bss, 31272K reserved, 132948K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc1671000 - 0xc1716000 ( 660 kB)
.data : 0xc1480d4c - 0xc166fbc0 (1979 kB)
.text : 0xc1000000 - 0xc1480d4c (4611 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1728.891 MHz processor
[ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.78 BogoMIPS (lpj=6915564)
[ 0.004024] pid_max: default: 32768 minimum: 301
[ 0.004045] ACPI: Core revision 20140424
[ 0.014828] ACPI: All ACPI Tables successfully acquired
[ 0.014871] Security Framework initialized
[ 0.014892] AppArmor: AppArmor disabled by boot time parameter
[ 0.014895] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.014929] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.014933] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015378] Initializing cgroup subsys memory
[ 0.015390] Initializing cgroup subsys devices
[ 0.015405] Initializing cgroup subsys freezer
[ 0.015411] Initializing cgroup subsys net_cls
[ 0.015421] Initializing cgroup subsys blkio
[ 0.015430] Initializing cgroup subsys perf_event
[ 0.015434] Initializing cgroup subsys net_prio
[ 0.015470] Disabled fast string operations
[ 0.015480] mce: CPU supports 5 MCE banks
[ 0.015492] CPU0: Thermal monitoring enabled (TM1)
[ 0.015506] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[ 0.027025] ftrace: allocating 20815 entries in 41 pages
[ 0.036124] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036599] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080903] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.73GHz (fam: 06, model: 0d, stepping: 08)
[ 0.084000] Performance Events: p6 PMU driver.
[ 0.084000] ... version: 0
[ 0.084000] ... bit width: 32
[ 0.084000] ... generic registers: 2
[ 0.084000] ... value mask: 00000000ffffffff
[ 0.084000] ... max period: 000000007fffffff
[ 0.084000] ... fixed-purpose events: 0
[ 0.084000] ... event mask: 0000000000000003
[ 0.084000] x86: Booted up 1 node, 1 CPUs
[ 0.084000] smpboot: Total of 1 processors activated (3457.78 BogoMIPS)
[ 0.084000] devtmpfs: initialized
[ 0.084099] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.086018] pinctrl core: initialized pinctrl subsystem
[ 0.086126] NET: Registered protocol family 16
[ 0.086306] cpuidle: using governor ladder
[ 0.086310] cpuidle: using governor menu
[ 0.086393] ACPI: bus type PCI registered
[ 0.086396] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.086518] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.086522] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.086524] PCI: Using MMCONFIG for extended config space
[ 0.086526] PCI: Using configuration type 1 for base access
[ 0.086541] dmi type 0xB1 record - unknown flag
[ 0.088166] ACPI: Added _OSI(Module Device)
[ 0.088169] ACPI: Added _OSI(Processor Device)
[ 0.088172] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.088174] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.095001] ACPI: Interpreter enabled
[ 0.095017] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.095024] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.095045] ACPI: (supports S0 S3 S4 S5)
[ 0.095047] ACPI: Using IOAPIC for interrupt routing
[ 0.095087] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.111819] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[ 0.116150] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
[ 0.125102] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.125110] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.125118] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.141719] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.141724] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.141727] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.141731] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.141734] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
[ 0.141738] acpi PNP0A03:00: host bridge window [mem 0xf0007000-0xf0007fff] (ignored)
[ 0.141741] acpi PNP0A03:00: host bridge window [mem 0xf000c000-0xfebfffff] (ignored)
[ 0.141745] acpi PNP0A03:00: host bridge window [mem 0xfec10000-0xfed1ffff] (ignored)
[ 0.141749] acpi PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff] (ignored)
[ 0.141752] PCI: root bus 00: using default resources
[ 0.141995] PCI host bridge to bus 0000:00
[ 0.142000] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.142003] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.142007] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.142021] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.142163] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.142177] pci 0000:00:02.0: reg 0x10: [mem 0xdff00000-0xdff7ffff]
[ 0.142184] pci 0000:00:02.0: reg 0x14: [io 0xec38-0xec3f]
[ 0.142191] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.142198] pci 0000:00:02.0: reg 0x1c: [mem 0xdfec0000-0xdfefffff]
[ 0.142328] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.142339] pci 0000:00:02.1: reg 0x10: [mem 0xdff80000-0xdfffffff]
[ 0.142525] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.142583] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
[ 0.142683] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.142760] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.142818] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
[ 0.142916] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.142993] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.143050] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
[ 0.143148] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.143225] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.143283] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
[ 0.143382] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.143471] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.143497] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[ 0.143603] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.143682] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.143763] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.143892] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.143975] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.143997] pci 0000:00:1e.2: reg 0x10: [io 0xed00-0xedff]
[ 0.144013] pci 0000:00:1e.2: reg 0x14: [io 0xec40-0xec7f]
[ 0.144027] pci 0000:00:1e.2: reg 0x18: [mem 0xdfebfe00-0xdfebffff]
[ 0.144040] pci 0000:00:1e.2: reg 0x1c: [mem 0xdfebfd00-0xdfebfdff]
[ 0.144106] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.144243] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.144355] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.144365] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.144372] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.144378] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[ 0.144504] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.144526] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7]
[ 0.144540] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7]
[ 0.144553] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177]
[ 0.144566] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377]
[ 0.144579] pci 0000:00:1f.2: reg 0x20: [io 0xbfa0-0xbfaf]
[ 0.144606] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.144609] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.144613] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.144616] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.144649] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.144891] pci 0000:02:00.0: [14e4:170c] type 00 class 0x020000
[ 0.144914] pci 0000:02:00.0: reg 0x10: [mem 0xdfdfa000-0xdfdfbfff]
[ 0.145009] pci 0000:02:00.0: supports D1 D2
[ 0.145012] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.145116] pci 0000:02:01.0: [104c:8036] type 02 class 0x060700
[ 0.145139] pci 0000:02:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.145184] pci 0000:02:01.0: supports D1 D2
[ 0.145187] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.145300] pci 0000:02:01.2: [104c:8037] type 00 class 0x0c0010
[ 0.145328] pci 0000:02:01.2: reg 0x10: [mem 0xdfdf8800-0xdfdf8fff]
[ 0.145344] pci 0000:02:01.2: reg 0x14: [mem 0xdfdfc000-0xdfdfffff]
[ 0.145452] pci 0000:02:01.2: supports D1 D2
[ 0.145455] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.145573] pci 0000:02:03.0: [8086:4220] type 00 class 0x028000
[ 0.145600] pci 0000:02:03.0: reg 0x10: [mem 0xdfdf9000-0xdfdf9fff]
[ 0.145713] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.145853] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[ 0.145862] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.145871] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.145875] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.145955] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
[ 0.145962] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[ 0.145966] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
[ 0.145972] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[ 0.145977] pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
[ 0.145988] pci_bus 0000:00: on NUMA node 0
[ 0.149771] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.149903] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.150033] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 0.150163] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.150275] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.150391] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.150507] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.152069] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.152270] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.152275] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.152280] vgaarb: loaded
[ 0.152282] vgaarb: bridge control possible 0000:00:02.0
[ 0.152374] PCI: Using ACPI for IRQ routing
[ 0.164028] PCI: pci_cache_line_size set to 64 bytes
[ 0.164084] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.164088] e820: reserve RAM buffer [mem 0x3f7d3800-0x3fffffff]
[ 0.164470] hpet clockevent registered
[ 0.164476] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.164483] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.164488] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.166522] Switched to clocksource hpet
[ 0.174342] pnp: PnP ACPI init
[ 0.174371] ACPI: bus type PNP registered
[ 0.185001] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[ 0.185006] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[ 0.185010] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.185015] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.185019] system 00:00: [mem 0x00100000-0x3f7d37ff] could not be reserved
[ 0.185023] system 00:00: [mem 0x3f7d3800-0x3f7fffff] has been reserved
[ 0.185027] system 00:00: [mem 0x3f800000-0x3fffffff] has been reserved
[ 0.185031] system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
[ 0.185036] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[ 0.185040] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.185044] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.185048] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.185053] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.185057] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.185062] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.185066] system 00:00: [mem 0xf0006000-0xf0006fff] has been reserved
[ 0.185070] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.185074] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.185080] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.185128] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185133] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185184] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.185189] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.185225] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185230] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185234] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.185287] system 00:02: [io 0xf400-0xf4fe] has been reserved
[ 0.185291] system 00:02: [io 0x1080-0x10bf] has been reserved
[ 0.185295] system 00:02: [io 0x10c0-0x10df] has been reserved
[ 0.185299] system 00:02: [io 0x10e0-0x10ff] could not be reserved
[ 0.185303] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.185384] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.185451] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.185518] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.185604] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.185608] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.185612] system 00:06: [io 0x0920-0x092f] has been reserved
[ 0.185616] system 00:06: [io 0x0930-0x093f] has been reserved
[ 0.185620] system 00:06: [io 0x0940-0x097f] has been reserved
[ 0.185624] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.190976] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.199623] pnp 00:08: [dma 1]
[ 0.199761] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.201654] pnp: PnP ACPI: found 9 devices
[ 0.201657] ACPI: bus type PNP unregistered
[ 0.201666] PnPBIOS: Disabled by ACPI PNP
[ 0.239287] pci 0000:02:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239291] pci 0000:02:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239297] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
[ 0.239308] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.239319] pci 0000:00:1e.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.239328] pci 0000:02:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.239331] pci 0000:02:01.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.239335] pci 0000:02:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239339] pci 0000:02:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239345] pci 0000:02:01.0: BAR 0: assigned [mem 0x40000000-0x40000fff]
[ 0.239354] pci 0000:02:01.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
[ 0.239360] pci 0000:02:01.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[ 0.239363] pci 0000:02:01.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.239367] pci 0000:02:01.0: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.239371] pci 0000:02:01.0: CardBus bridge to [bus 03-06]
[ 0.239375] pci 0000:02:01.0: bridge window [io 0x2000-0x20ff]
[ 0.239381] pci 0000:02:01.0: bridge window [io 0x2400-0x24ff]
[ 0.239387] pci 0000:02:01.0: bridge window [mem 0x44000000-0x47ffffff pref]
[ 0.239394] pci 0000:02:01.0: bridge window [mem 0x48000000-0x4bffffff]
[ 0.239400] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.239405] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.239412] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.239425] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.239428] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.239432] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.239436] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.239439] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.239442] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.239446] pci_bus 0000:03: resource 0 [io 0x2000-0x20ff]
[ 0.239449] pci_bus 0000:03: resource 1 [io 0x2400-0x24ff]
[ 0.239453] pci_bus 0000:03: resource 2 [mem 0x44000000-0x47ffffff pref]
[ 0.239456] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff]
[ 0.239502] NET: Registered protocol family 2
[ 0.239896] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.239929] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.239989] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.240048] TCP: reno registered
[ 0.240052] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240069] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240157] NET: Registered protocol family 1
[ 0.240186] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.242020] PCI: CLS 64 bytes, default 64
[ 0.242109] Unpacking initramfs...
[ 0.726603] Freeing initrd memory: 14328K (f63f4000 - f71f2000)
[ 0.726738] Simple Boot Flag at 0x79 set to 0x1
[ 0.726916] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 0.727024] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.727493] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.727563] audit: initializing netlink subsys (disabled)
[ 0.727606] audit: type=2000 audit(1467310071.724:1): initialized
[ 0.728186] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.728214] zbud: loaded
[ 0.728310] VFS: Disk quotas dquot_6.5.2
[ 0.728333] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.728428] msgmni has been set to 1738
[ 0.728897] alg: No test for stdrng (krng)
[ 0.728929] bounce: pool size: 64 pages
[ 0.728949] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.729008] io scheduler noop registered
[ 0.729012] io scheduler deadline registered
[ 0.729062] io scheduler cfq registered (default)
[ 0.729224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.729257] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.729300] intel_idle: does not run on family 6 model 13
[ 0.729361] GHES: HEST is not enabled!
[ 0.729398] isapnp: Scanning for PnP cards...
[ 1.083208] isapnp: No Plug & Play device found
[ 1.083325] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.103967] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.104500] Linux agpgart interface v0.103
[ 1.104633] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 1.104657] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.105538] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.105702] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.105955] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.110786] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.110796] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.111002] mousedev: PS/2 mouse device common for all mice
[ 1.111254] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.111290] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.111312] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.112170] TCP: cubic registered
[ 1.112194] NET: Registered protocol family 10
[ 1.112519] mip6: Mobile IPv6
[ 1.112525] NET: Registered protocol family 17
[ 1.112534] mpls_gso: MPLS GSO support
[ 1.112736] Using IPI No-Shortcut mode
[ 1.112909] registered taskstats version 1
[ 1.113361] rtc_cmos 00:05: setting system clock to 2016-06-30 18:07:52 UTC (1467310072)
[ 1.113451] PM: Hibernation image not present or could not be loaded.
[ 1.113793] Freeing unused kernel memory: 660K (c1671000 - c1716000)
[ 1.113842] Write protecting the kernel text: 4612k
[ 1.113891] Write protecting the kernel read-only data: 1456k
[ 1.113893] NX-protecting the kernel data: 3580k
[ 1.116513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.128207] systemd-udevd[55]: starting version 215
[ 1.128604] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.160415] ACPI: bus type USB registered
[ 1.160469] usbcore: registered new interface driver usbfs
[ 1.160491] usbcore: registered new interface driver hub
[ 1.165345] usbcore: registered new device driver usb
[ 1.166132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.166331] ehci-pci: EHCI PCI platform driver
[ 1.166621] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.166632] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.166653] ehci-pci 0000:00:1d.7: debug port 1
[ 1.170566] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.171161] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.171683] ehci-pci 0000:00:1d.7: irq 16, io mem 0xffa80800
[ 1.180028] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.180143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.180147] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180150] usb usb1: Product: EHCI Host Controller
[ 1.180153] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.180156] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.180393] hub 1-0:1.0: USB hub found
[ 1.180407] hub 1-0:1.0: 8 ports detected
[ 1.181273] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.181283] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.181293] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.181318] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 1.181399] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.181402] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.181406] usb usb2: Product: UHCI Host Controller
[ 1.181409] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.181411] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.181590] hub 2-0:1.0: USB hub found
[ 1.181600] hub 2-0:1.0: 2 ports detected
[ 1.181942] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.181950] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.181958] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.181999] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[ 1.182070] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182073] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182076] usb usb3: Product: UHCI Host Controller
[ 1.182079] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.182082] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.182259] hub 3-0:1.0: USB hub found
[ 1.182268] hub 3-0:1.0: 2 ports detected
[ 1.182607] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.182617] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.182626] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.182660] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[ 1.182719] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182723] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182725] usb usb4: Product: UHCI Host Controller
[ 1.182728] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.182731] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.182906] hub 4-0:1.0: USB hub found
[ 1.182916] hub 4-0:1.0: 2 ports detected
[ 1.183254] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.183263] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.183270] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.183304] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[ 1.183364] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.183367] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183370] usb usb5: Product: UHCI Host Controller
[ 1.183373] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.183376] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.183558] hub 5-0:1.0: USB hub found
[ 1.183567] hub 5-0:1.0: 2 ports detected
[ 1.198049] SCSI subsystem initialized
[ 1.207032] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.207038] ACPI: Thermal Zone [THM] (54 C)
[ 1.217400] libata version 3.00 loaded.
[ 1.218715] ahci 0000:00:1f.2: version 3.0
[ 1.218935] ahci 0000:00:1f.2: controller is in combined mode, can't enable AHCI mode
[ 1.219593] ata_piix 0000:00:1f.2: version 2.13
[ 1.219763] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.220094] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[ 1.220103] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.220110] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.220118] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.260158] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 1.260205] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 1.280709] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:14:22:d7:c4:e6
[ 1.316050] firewire_ohci 0000:02:01.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.373588] scsi0 : ata_piix
[ 1.373781] scsi1 : ata_piix
[ 1.373864] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 1.373867] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 1.492023] usb 1-8: new high-speed USB device number 2 using ehci-pci
[ 1.536698] ata1.00: ATA-6: ST960822A, 8.03, max UDMA/100
[ 1.536702] ata1.00: 117210240 sectors, multi 8: LBA48
[ 1.536706] ata1.00: applying bridge limits
[ 1.552591] ata2.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462C, DE01, max UDMA/33
[ 1.552999] ata1.00: configured for UDMA/100
[ 1.553141] scsi 0:0:0:0: Direct-Access ATA ST960822A 8.03 PQ: 0 ANSI: 5
[ 1.584250] ata2.00: configured for UDMA/33
[ 1.585091] scsi 1:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462C DE01 PQ: 0 ANSI: 5
[ 1.598950] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.599025] sd 0:0:0:0: [sda] Write Protect is off
[ 1.599029] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.599059] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.605100] sr0: scsi3-mmc drive: 10x/24x writer cd/rw xa/form2 cdda tray
[ 1.605103] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.605281] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.606781] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.606879] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.626368] usb 1-8: New USB device found, idVendor=05e3, idProduct=0605
[ 1.626374] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.626377] usb 1-8: Product: USB2.0 Hub
[ 1.626841] hub 1-8:1.0: USB hub found
[ 1.627111] hub 1-8:1.0: 4 ports detected
[ 1.630622] sda: sda1 sda2 sda3 sda4
[ 1.631307] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.724023] tsc: Refined TSC clocksource calibration: 1728.999 MHz
[ 1.816188] firewire_core 0000:02:01.2: created device fw0: GUID 394fc00008aa9050, S400
[ 1.900029] usb 1-8.1: new low-speed USB device number 3 using ehci-pci
[ 1.996485] usb 1-8.1: New USB device found, idVendor=046d, idProduct=c016
[ 1.996491] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.996494] usb 1-8.1: Product: Optical USB Mouse
[ 1.996497] usb 1-8.1: Manufacturer: Logitech
[ 1.999162] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.003480] usbcore: registered new interface driver usbhid
[ 2.003483] usbhid: USB HID core driver
[ 2.005552] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.1/1-8.1:1.0/0003:046D:C016.0001/input/input4
[ 2.005748] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-8.1/input0
[ 2.068028] usb 1-8.4: new low-speed USB device number 4 using ehci-pci
[ 2.165358] usb 1-8.4: New USB device found, idVendor=0e8f, idProduct=0020
[ 2.165364] usb 1-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.165367] usb 1-8.4: Product: PS2toUSB Adapter
[ 2.165370] usb 1-8.4: Manufacturer: GASIA
[ 2.171056] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.4/1-8.4:1.0/0003:0E8F:0020.0002/input/input5
[ 2.171542] hid-generic 0003:0E8F:0020.0002: input,hidraw1: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1d.7-8.4/input0
[ 2.181461] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.4/1-8.4:1.1/0003:0E8F:0020.0003/input/input6
[ 2.181648] hid-generic 0003:0E8F:0020.0003: input,hidraw2: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1d.7-8.4/input1
[ 2.197869] PM: Starting manual resume from disk
[ 2.197877] PM: Hibernation image partition 8:1 present
[ 2.197879] PM: Looking for hibernation image.
[ 2.218397] PM: Image not found (code -22)
[ 2.218400] PM: Hibernation image not present or could not be loaded.
[ 2.240213] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input3
[ 2.259231] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[ 2.421976] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.724075] Switched to clocksource tsc
[ 3.645044] random: nonblocking pool is initialized
[ 5.646996] lp: driver loaded but no devices found
[ 5.671961] ppdev: user-space parallel port driver
[ 5.691404] parport_pc 00:08: reported by Plug and Play ACPI
[ 5.691476] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.788146] lp0: using parport0 (interrupt-driven).
[ 5.837747] fuse init (API version 7.23)
[ 5.869749] systemd-udevd[150]: starting version 215
[ 7.531638] tsc: Marking TSC unstable due to TSC halts in idle
[ 7.531663] ACPI: acpi_idle registered with cpuidle
[ 7.536036] Switched to clocksource hpet
[ 7.606923] ACPI: AC Adapter [AC] (on-line)
[ 7.660796] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 7.661367] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 7.664417] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 7.868869] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8
[ 7.869587] ACPI: Lid Switch [LID]
[ 7.869769] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
[ 7.869780] ACPI: Power Button [PBTN]
[ 7.869951] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[ 7.869960] ACPI: Sleep Button [SBTN]
[ 7.967374] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.114436] NET: Registered protocol family 23
[ 8.163474] ACPI: Battery Slot [BAT0] (battery present)
[ 8.163586] ACPI: Battery Slot [BAT1] (battery absent)
[ 8.221794] [drm] Initialized drm 1.1.0 20060810
[ 8.408292] [drm] Memory usable by graphics device = 256M
[ 8.408298] [drm] Replacing VGA console driver
[ 8.409187] Console: switching to colour dummy device 80x25
[ 8.413436] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.413441] [drm] Driver supports precise vblank timestamp query.
[ 8.413541] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.425094] yenta_cardbus 0000:02:01.0: enabling device (0000 -> 0003)
[ 8.425234] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01af]
[ 8.425256] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[ 8.425260] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[ 8.425266] yenta_cardbus 0000:02:01.0: TI: mfunc 0x01001022, devctl 0x64
[ 8.431742] intel_rng: FWH not detected
[ 8.656853] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0c78, PCI irq 19
[ 8.656862] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 8.656866] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 8.656876] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 8.656881] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff:
[ 8.658026] excluding 0x2000-0x20ff 0x2400-0x24ff
[ 8.671162] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xdfd00000-0xdfdfffff]
[ 8.671170] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdfd00000-0xdfdfffff:
[ 8.671183] excluding 0xdfdf0000-0xdfdfffff
[ 8.809556] lib80211: common routines for IEEE802.11 drivers
[ 8.809562] lib80211_crypt: registered algorithm 'NULL'
[ 8.887439] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 8.910362] cfg80211: Calling CRDA to update world regulatory domain
[ 8.915333] [drm] initialized overlay support
[ 8.918715] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 9.163241] libipw: 802.11 data/management/control stack, git-1.1.13
[ 9.163248] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 9.238564] fbcon: inteldrmfb (fb0) is primary device
[ 9.255113] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 9.256741] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 9.256793] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 9.257460] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 9.257496] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 9.258047] clean.
[ 9.258081] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 9.258705] clean.
[ 9.258745] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 9.258784] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xf0000-0xfffff
[ 9.258820] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 9.258857] clean.
[ 9.258891] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 9.258928] clean.
[ 9.258962] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 9.259606] clean.
[ 9.311948] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 9.311950] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 9.312416] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 9.365804] ipw2200 0000:02:03.0: firmware: failed to load ipw2200-bss.fw (-2)
[ 9.365807] ipw2200 0000:02:03.0: Direct firmware load failed with error -2
[ 9.365808] ipw2200 0000:02:03.0: Falling back to user helper
[ 9.370621] ipw2200: Unable to load firmware: -12
[ 9.370799] ipw2200: probe of 0000:02:03.0 failed with error -5
[ 10.160655] cfg80211: World regulatory domain updated:
[ 10.160660] cfg80211: DFS Master region: unset
[ 10.160661] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.160666] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.160670] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.160674] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.160679] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 10.160684] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 10.160689] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.160693] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.160696] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.506981] Console: switching to colour frame buffer device 128x48
[ 10.512066] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.512070] i915 0000:00:02.0: registered panic notifier
[ 10.512087] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.671663] iTCO_vendor_support: vendor-support=0
[ 10.761573] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.761658] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 10.762077] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.182091] Adding 1023996k swap on /dev/sda1. Priority:-1 extents:1 across:1023996k FS
[ 11.340059] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 55309 usecs (2665 samples)
[ 11.340072] snd_intel8x0 0000:00:1e.2: clocking to 48000
[ 12.307174] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.698602] systemd-journald[143]: Received request to flush runtime journal from PID 1
[ 14.666043] RPC: Registered named UNIX socket transport module.
[ 14.666053] RPC: Registered udp transport module.
[ 14.666058] RPC: Registered tcp transport module.
[ 14.666062] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.703690] FS-Cache: Loaded
[ 14.740281] FS-Cache: Netfs 'nfs' registered for caching
[ 14.803080] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 29.680949] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.816212] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[ 32.816220] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[ 32.816321] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 38.422319] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 113.825168] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 115.614965] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1504.312064] usb 1-7: new high-speed USB device number 5 using ehci-pci
[ 1504.446341] usb 1-7: New USB device found, idVendor=1307, idProduct=0165
[ 1504.446351] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1504.446358] usb 1-7: Product: USB Mass Storage Device
[ 1504.446365] usb 1-7: Manufacturer: USBest Technology
[ 1504.446371] usb 1-7: SerialNumber: 00000000000117
[ 1504.540399] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 1504.541199] scsi2 : usb-storage 1-7:1.0
[ 1504.541338] usbcore: registered new interface driver usb-storage
[ 1505.541150] scsi 2:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[ 1505.543864] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1505.545971] sd 2:0:0:0: [sdb] 7897040 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 1505.546946] sd 2:0:0:0: [sdb] Write Protect is off
[ 1505.546956] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1505.550440] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1505.550451] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1505.686270] sdb: sdb1 sdb2
[ 1505.828603] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1506.472491] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1506.499454] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1506.528071] EXT4-fs (sdb2): warning: mounting fs with errors, running e2fsck is recommended
[ 1506.538051] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 1591.686821] usb 1-7: USB disconnect, device number 5
[ 7107.704069] usb 1-5: new high-speed USB device number 6 using ehci-pci
[ 7107.838318] usb 1-5: New USB device found, idVendor=1307, idProduct=0165
[ 7107.838329] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7107.838337] usb 1-5: Product: USB Mass Storage Device
[ 7107.838343] usb 1-5: Manufacturer: USBest Technology
[ 7107.838350] usb 1-5: SerialNumber: 00000000000117
[ 7107.839564] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 7107.841070] scsi3 : usb-storage 1-5:1.0
[ 7108.843607] scsi 3:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[ 7108.846972] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 7108.848554] sd 3:0:0:0: [sdb] 7897040 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 7108.849581] sd 3:0:0:0: [sdb] Write Protect is off
[ 7108.849592] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 7108.851074] sd 3:0:0:0: [sdb] Asking for cache data failed
[ 7108.851084] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 7108.987623] sdb: sdb1 sdb2
[ 7109.131330] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 7110.175335] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 7110.202311] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7110.233106] EXT4-fs (sdb2): warning: mounting fs with errors, running e2fsck is recommended
[ 7110.244049] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 7239.643958] usb 1-5: USB disconnect, device number 6
[ 7847.649827] perf interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Jun 30 22:06:21 feu kernel: [ 7110.175335] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jun 30 22:06:21 feu kernel: [ 7110.202311] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jun 30 22:06:21 feu org.gtk.Private.UDisks2VolumeMonitor[1839]: index_parse.c:191: indx_parse(): error opening /media/ainara/fat-16-pock/BDMV/index.bdmv
Jun 30 22:06:21 feu org.gtk.Private.UDisks2VolumeMonitor[1839]: index_parse.c:191: indx_parse(): error opening /media/ainara/fat-16-pock/BDMV/BACKUP/index.bdmv
Jun 30 22:06:21 feu kernel: [ 7110.233106] EXT4-fs (sdb2): warning: mounting fs with errors, running e2fsck is recommended
Jun 30 22:06:21 feu kernel: [ 7110.244049] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
Jun 30 22:06:21 feu org.gtk.Private.UDisks2VolumeMonitor[1839]: index_parse.c:191: indx_parse(): error opening /media/ainara/pocket-nux/BDMV/index.bdmv
Jun 30 22:06:21 feu org.gtk.Private.UDisks2VolumeMonitor[1839]: index_parse.c:191: indx_parse(): error opening /media/ainara/pocket-nux/BDMV/BACKUP/index.bdmv
Jun 30 22:08:31 feu kernel: [ 7239.643958] usb 1-5: USB disconnect, device number 6
Jun 30 22:18:39 feu kernel: [ 7847.649827] perf interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
jack server is not running or cannot be started
Cannot connect to server socket err = Aucun fichier ou dossier de ce type
Cannot connect to server request channel
jack server is not running or cannot be started
Cannot connect to server socket err = Aucun fichier ou dossier de ce type
Cannot connect to server request channel
jack server is not running or cannot be started
** (mate-terminal:3456): WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported
jack server is not running or cannot be started
Cannot connect to server socket err = Aucun fichier ou dossier de ce type
Cannot connect to server request channel
jack server is not running or cannot be started
Cannot connect to server socket err = Aucun fichier ou dossier de ce type
Cannot connect to server request channel
jack server is not running or cannot be started
** (mate-terminal:3456): WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported
Reply to: