Re-scanner un contrlleur HBA
Salut,
Tout se passe sur une debian squeeze en amd64.
J'essaie de re-scanner un HBA pour ajouter des nouveaux volumes. Quand je
re-scanne le controlleur (echo 1 > /sys/class/fc_host/hostID/issue_lip), je
detecte bien les nouveaux paths, par-contre les volumes ne sont pas cree (pb
udev ?).
J'ai egalement teste la commande:
echo "- - -" > /sys/class/scsi_host/host0/scan, qui ne semble pas faire grand
chose...
Voila les logs apres le echo:
Aug 8 16:23:17 web1 kernel: [4495758.739299] qla2xxx 0000:06:00.0: LIP reset
occurred (f7f7).
Aug 8 16:23:17 web1 kernel: [4495758.759805] qla2xxx 0000:06:00.0: LIP
occurred (f7f7).
Aug 8 16:23:17 web1 kernel: [4495758.760068] qla2xxx 0000:06:00.0: LIP reset
occurred (f7f7).
Aug 8 16:23:18 web1 kernel: [4495760.325368] scsi 0:0:1:1: Enclosure IFT
DS S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 8 16:23:18 web1 kernel: [4495760.325495] ses 0:0:1:1: Attached Enclosure
device
Aug 8 16:23:18 web1 kernel: [4495760.326590] scsi 0:0:8:1: Enclosure IFT
DS S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 8 16:23:18 web1 kernel: [4495760.326724] ses 0:0:8:1: Attached Enclosure
device
Aug 8 16:23:18 web1 kernel: [4495760.329038] scsi 0:0:13:1: Enclosure
IFT DS S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 8 16:23:18 web1 kernel: [4495760.329135] ses 0:0:13:1: Attached Enclosure
device
Aug 8 16:23:18 web1 kernel: [4495760.330059] scsi 0:0:14:1: Enclosure
IFT DS S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 8 16:23:18 web1 kernel: [4495760.330189] ses 0:0:14:1: Attached Enclosure
device
A titre de comparaison, voila ce que j'ai au boot d'une machine:
Aug 9 12:54:52 web1 kernel: [ 2.927917] qla2xxx 0000:06:00.1: LIP reset
occurred (f8f7).
Aug 9 12:54:52 web1 kernel: [ 2.942707] qla2xxx 0000:06:00.1: LIP occurred
(f8f7).
Aug 9 12:54:52 web1 kernel: [ 2.952385] qla2xxx 0000:06:00.1: LIP reset
occurred (f7f7).
Aug 9 12:54:52 web1 kernel: [ 2.960423] qla2xxx 0000:06:00.0: LOOP UP
detected (8 Gbps).
[...]
Aug 9 12:54:52 web1 kernel: [ 3.012871] qla2xxx 0000:06:00.1: LOOP UP
detected (8 Gbps).
Aug 9 12:54:52 web1 kernel: [ 3.033922] device-mapper: uevent: version
1.0.3
Aug 9 12:54:52 web1 kernel: [ 3.034318] device-mapper: ioctl: 4.15.0-ioctl
(2009-04-01) initialised: dm-devel@redhat.com Aug 9 12:54:52 web1 kernel:
[ 3.046111] PM: Starting manual resume from disk
Aug 9 12:54:52 web1 kernel: [ 3.077369] kjournald starting. Commit
interval 5 seconds
Aug 9 12:54:52 web1 kernel: [ 3.077387] EXT3-fs: mounted filesystem with
ordered data mode.
Aug 9 12:54:52 web1 kernel: [ 3.509092] scsi: waiting for bus probes to
complete ...
Aug 9 12:54:52 web1 kernel: [ 3.542948] scsi 0:0:0:0: Direct-Access
IFT DS S16F-R2840-4 385E PQ: 0 ANSI: 5
Aug 9 12:54:52 web1 kernel: [ 3.543910] scsi 0:0:0:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.550199] scsi 0:0:1:0: Direct-Access IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.551181] scsi 0:0:1:1: Enclosure IFT
DS S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.551928] scsi 0:0:2:0: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.558469] scsi 0:0:3:0: Direct-Access IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.559470] scsi 0:0:3:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.568473] scsi 0:0:4:0: Direct-Access
IFT DS S16F-R2840-4 385E PQ: 0 ANSI: 5
Aug 9 12:54:52 web1 kernel: [ 3.571278] scsi 4:0:0:0: Direct-Access
IFT DS S16F-R2840-4 385E PQ: 0 ANSI: 5
Aug 9 12:54:52 web1 kernel: [ 3.571891] scsi 0:0:4:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.572167] scsi 4:0:0:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.580748] scsi 0:0:5:0: Direct-Access IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.583555] scsi 4:0:1:0: Direct-Access
IFT DS S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.584169] scsi 0:0:5:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.584445] scsi 4:0:1:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.584917] scsi 0:0:6:0: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.585074] scsi 4:0:2:0: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.594070] scsi 0:0:7:0: Direct-Access IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.596835] scsi 4:0:3:0: Direct-Access
IFT DS S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.597453] scsi 0:0:7:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.597754] scsi 4:0:3:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.603972] scsi 4:0:4:0: Direct-Access IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 5
Aug 9 12:54:52 web1 kernel: [ 3.604960] scsi 4:0:4:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.611238] scsi 4:0:5:0: Direct-Access
IFT DS S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.612231] scsi 4:0:5:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.613019] scsi 4:0:6:0: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.616738] udev[715]: starting version 164
Aug 9 12:54:52 web1 kernel: [ 3.619500] scsi 4:0:7:0: Direct-Access
IFT DS S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.620333] scsi 4:0:7:1: Enclosure IFT DS
S16F-R2840-4 385E PQ: 0 ANSI: 4
Aug 9 12:54:52 web1 kernel: [ 3.680885] ses 0:0:0:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.680915] ses 0:0:1:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.680933] ses 0:0:2:0: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.680963] ses 0:0:3:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681033] ses 0:0:4:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681045] ses 4:0:0:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681084] ses 0:0:5:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681101] ses 4:0:1:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681113] ses 0:0:6:0: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681128] ses 4:0:2:0: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681174] ses 0:0:7:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681186] ses 4:0:3:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681218] ses 4:0:4:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681246] ses 4:0:5:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681257] ses 4:0:6:0: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.681288] ses 4:0:7:1: Attached Enclosure
device
Aug 9 12:54:52 web1 kernel: [ 3.712337] sd 0:0:0:0: [sda] 25187708928
512-byte logical blocks: (12.8 TB/11.7 TiB)
Aug 9 12:54:52 web1 kernel: [ 3.712465] sd 0:0:1:0: [sdb] 1073741824
512-byte logical blocks: (549 GB/512 GiB)
Aug 9 12:54:52 web1 kernel: [ 3.715283] sd 0:0:4:0: [sdd] 25187708928
512-byte logical blocks: (12.8 TB/11.7 TiB)
Aug 9 12:54:52 web1 kernel: [ 3.715452] sd 4:0:0:0: [sde] 25187708928
512-byte logical blocks: (12.8 TB/11.7 TiB)
Aug 9 12:54:52 web1 kernel: [ 3.715563] sd 0:0:1:0: [sdb]
Write Protect is off
Aug 9 12:54:52 web1 kernel: [ 3.718425] sd 0:0:5:0: [sdf] 1073741824
512-byte logical blocks: (549 GB/512 GiB)
Aug 9 12:54:52 web1 kernel: [ 3.718471] sd 0:0:3:0: [sdc] 1073741824
512-byte logical blocks: (549 GB/512 GiB)
Aug 9 12:54:52 web1 kernel: [ 3.718659] sd 0:0:3:0: [sdc] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.718697] sd 4:0:7:0: [sdl] 1073741824
512-byte logical blocks: (549 GB/512 GiB) Aug 9 12:54:52 web1 kernel:
[ 3.718776] sd 0:0:0:0: [sda] Write Protect is off
Aug 9 12:54:52 web1 kernel: [ 3.718884] sd 4:0:7:0: [sdl] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.718917] sd 0:0:1:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.718929] sd 0:0:3:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.718942] sd 4:0:4:0: [sdj] 25187708928
512-byte logical blocks: (12.8 TB/11.7 TiB)
Aug 9 12:54:52 web1 kernel: [ 3.718993] sd 4:0:5:0: [sdk] 1073741824
512-byte logical blocks: (549 GB/512 GiB)
Aug 9 12:54:52 web1 kernel: [ 3.719099] sd 0:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1
kernel: [ 3.721280] sd 4:0:3:0: [sdi] 1073741824 512-byte logical blocks:
(549 GB/512 GiB)
Aug 9 12:54:52 web1 kernel: [ 3.722009] sd 4:0:7:0: [sdl] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.722115] sd 4:0:5:0: [sdk] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.724082] sd 0:0:7:0: [sdh] 1073741824
512-byte logical blocks: (549 GB/512 GiB)
Aug 9 12:54:52 web1 kernel: [ 3.724142] sd 4:0:1:0: [sdg] 1073741824
512-byte logical blocks: (549 GB/512 GiB)
Aug 9 12:54:52 web1 kernel: [ 3.724150] sd 4:0:3:0: [sdi] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.724205] sd 0:0:5:0: [sdf] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.724278] sd 0:0:7:0: [sdh] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.727190] sd 0:0:4:0: [sdd] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.727260] sd 4:0:1:0: [sdg] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.727412] sd 4:0:0:0: [sde] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.727809] sd 0:0:7:0: [sdh] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.727872] sd 0:0:5:0: [sdf] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.728089] sd 4:0:5:0: [sdk] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.728115] sd 4:0:4:0: [sdj] Write Protect is
off
Aug 9 12:54:52 web1 kernel: [ 3.728155] sd 4:0:1:0: [sdg] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.728241] sd 0:0:4:0: [sdd] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.728283] sdb:
Aug 9 12:54:52 web1 kernel: [ 3.728392] sd 4:0:3:0: [sdi] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.728475] sd 4:0:0:0: [sde] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.731367] sd 4:0:4:0: [sdj] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Aug 9 12:54:52 web1 kernel: [ 3.731377] sdc:
Aug 9 12:54:52 web1 kernel: [ 3.731874] sdf:
Aug 9 12:54:52 web1 kernel: [ 3.731996] sdh:
Aug 9 12:54:52 web1 kernel: [ 3.732283] sda:
Aug 9 12:54:52 web1 kernel: [ 3.732350] sdk:
Aug 9 12:54:52 web1 kernel: [ 3.732386] sdl:
Aug 9 12:54:52 web1 kernel: [ 3.737650] sdg:
Aug 9 12:54:52 web1 kernel: [ 3.737725] sdi:
Aug 9 12:54:52 web1 kernel: [ 3.738547] sdj: unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.739783] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.739801] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.740061] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.740142] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.740725] sdd:
Aug 9 12:54:52 web1 kernel: [ 3.741005] sde: unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.743899] sd 0:0:3:0: [sdc] Attached SCSI
disk
Aug 9 12:54:52 web1 kernel: [ 3.746749] sd 4:0:5:0: [sdk] Attached SCSI
disk
Aug 9 12:54:52 web1 kernel: [ 3.746760] sd 4:0:7:0: [sdl] Attached SCSI
disk
Aug 9 12:54:52 web1 kernel: [ 3.750047] sd 0:0:0:0: [sda] Attached SCSI
disk
Aug 9 12:54:52 web1 kernel: [ 3.750311] sd 0:0:1:0: [sdb] Attached SCSI
disk
Aug 9 12:54:52 web1 kernel: [ 3.753571] sd 4:0:4:0: [sdj] Attached SCSI
disk
Aug 9 12:54:52 web1 kernel: [ 3.754855] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.754997] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.755173] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.755260] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.755874] sd 0:0:5:0: [sdf] Attached SCSI
disk
Aug 9 12:54:52 web1 kernel: [ 3.755878] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.755991] sd 0:0:7:0: [sdh] Attached SCSI
disk
Aug 9 12:54:52 web1 kernel: [ 3.756065] unknown partition table
Aug 9 12:54:52 web1 kernel: [ 3.756294] sd 4:0:3:0: [sdi] Attached SCSI
disk
Quelqu'un aurait-il une idee ?
--
Regards,
Jean-Christphe
Reply to: