[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

smartd.conf et sda


J'ai une asus p5kc avec un contrôleur sata :

03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 01)
        Subsystem: ASUSTeK Computer Inc. Device 824f
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
        Expansion ROM at feae0000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

sous /dev/disk/by-id/ mon disque sata apparaît comme ça :

ata-Hitachi_HDS721616PLA380_PVF904Z9US7KPN -> ../../sda
scsi-SATA_Hitachi_HDS7216_PVF904Z9US7KPN -> ../../sda

Question : faut-il ou pas préciser -d sat dans smard.conf ?

Merci d'avance.

ps :

An ATA disk may appear as a SCSI device to the
OS. If a SCSI to ATA Translation (SAT) layer
is between the OS and the device then this can be
flagged with the '-d sat' option. This situation
may become common with SATA disks in SAS and FC


Reply to: