smartd.conf et sda
Bonjour,
J'ai une asus p5kc avec un contrôleur sata :
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device 824f
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at feae0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
sous /dev/disk/by-id/ mon disque sata apparaît comme ça :
ata-Hitachi_HDS721616PLA380_PVF904Z9US7KPN -> ../../sda
scsi-SATA_Hitachi_HDS7216_PVF904Z9US7KPN -> ../../sda
Question : faut-il ou pas préciser -d sat dans smard.conf ?
Merci d'avance.
ps :
An ATA disk may appear as a SCSI device to the
OS. If a SCSI to ATA Translation (SAT) layer
is between the OS and the device then this can be
flagged with the '-d sat' option. This situation
may become common with SATA disks in SAS and FC
environments.
--
philippe
Reply to: