Re: Ekstrem langsom computer
Nej, jeg beklager.
Næste skridt i min bog ville være, at tjekke om du tilfældigvis ser nogen
proces sluge cpu-tiden (kswapd er min egen favorit)... Og derefter søge
hjælp på den engelske debian-user.
Med venlig hilsen, Anders Breindahl.
On Monday 18 April 2005 21:13, you wrote:
> Anders Breindahl wrote:
> > Det var da en sjov historie. Altså, ikke fordi jeg morer mig, men --
> > finurlig. Kunne du sende outputtet af:
> >
> > `lsmod'
> > `dmesg'
> > `tail -n 100 /var/log/messages'
> >
> > -- Efter du eventuelt stryger private oplysninger outputtet.
> >
> > Jeg tør ikke garantere om der er noget at finde, men -- vi kan jo kigge
> > på det, og se om der er noget du har overset. :)
> >
> > Med venlig hilsen, Anders Breindahl.
>
> Nu har jeg endelig fået den op igen. Jeg har ikke rigtigt brugt den,
> fordi jeg blev så irriteret over, at den var så langsom...
>
> krikkit:~# lsmod
> Module Size Used by Not tainted
> 3c59x 24648 1
> smbfs 31296 0 (unused)
> nfsd 42848 0 (unused)
> keybdev 1664 0 (unused)
> usbkbd 2848 0 (unused)
> input 3072 0 [keybdev usbkbd]
> usb-uhci 20708 0 (unused)
> usbcore 48032 0 [usbkbd usb-uhci]
>
> krikkit:~# dmesg
> Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002
> (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000006000000 (usable)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> On node 0 totalpages: 24576
> zone(0): 4096 pages.
> zone(1): 20480 pages.
> zone(2): 0 pages.
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Kernel command line: auto BOOT_IMAGE=Linux ro root=301
> Initializing CPU#0
> Detected 231.787 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 445.64 BogoMIPS
> Memory: 93432k/98304k available (1783k kernel code, 4488k reserved, 549k
> data, 280k init, 0k highmem)
> Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
> Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
> CPU: Before vendor init, caps: 0080fbff 00000000 00000000, vendor = 0
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: After vendor init, caps: 0080fbff 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0080fbff 00000000 00000000 00000000
> CPU: Common caps: 0080fbff 00000000 00000000 00000000
> CPU: Intel Pentium II (Klamath) stepping 04
> Checking 'hlt' instruction... OK.
> Checking for popad bug... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 231.7916 MHz.
> ..... host bus clock speed is 66.2233 MHz.
> cpu: 0, clocks: 662233, slice: 331116
> CPU0<T0:662224,T1:330992,D:116,S:331116,C:662233>
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xfcaae, last bus=2
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> Unknown bridge resource 1: assuming transparent
> Unknown bridge resource 2: assuming transparent
> PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
> Limiting direct PCI/PCI transfers.
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> VFS: Diskquotas version dquot_6.4.0 initialized
> Journalled Block Device driver loaded
> vga16fb: initializing
> vga16fb: mapped to 0xc00a0000
> Console: switching to colour frame buffer device 80x30
> fb0: VGA16 VGA frame buffer device
> pty: 256 Unix98 ptys configured
> keyboard: Timeout - AT keyboard not present?(ed)
> keyboard: Timeout - AT keyboard not present?(f4)
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Real Time Clock Driver v1.10e
> block: 128 slots per queue, batch=32
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
> hda: Maxtor 84320D4, ATA DISK drive
> hdc: TOSHIBA CD-ROM XM-6102B, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 8439184 sectors (4321 MB) w/256KiB Cache, CHS=525/255/63
> hdc: ATAPI 24X CD-ROM drive, 256kB Cache
> Uniform CD-ROM driver Revision: 3.12
> ide-floppy driver 0.97.sv
> Partition check:
> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> Loading I2O Core - (c) Copyright 1999 Red Hat Software
> I2O configuration manager v 0.04.
> (C) Copyright 1999 Red Hat Software
> loop: loaded (max 8 devices)
> Compaq CISS Driver (v 2.4.5)
> HDLC support module revision 1.02 for Linux 2.4
> Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
> Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
> ide-floppy driver 0.97.sv
> Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
> Highpoint HPT370 Softwareraid driver for linux version 0.01
> No raid array found
> SCSI subsystem driver Revision: 1.00
> Red Hat/Adaptec aacraid driver, Apr 14 2002
> DC390: 0 adapters found
> 3ware Storage Controller device driver for Linux v1.02.00.016.
> 3w-xxxx: No cards with valid units found.
> request_module[scsi_hostadapter]: Root fs not mounted
> request_module[scsi_hostadapter]: Root fs not mounted
> i2o_scsi.c: Version 0.0.1
> chain_pool: 0 bytes @ c1185d80
> (512 byte buffers X 4 can_queue X 0 i2o controllers)
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 8192 bind 8192)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 280k freed
> Adding Swap: 248968k swap-space (priority -1)
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
> usb-uhci.c: High bandwidth mode enabled
> PCI: Found IRQ 11 for device 00:07.2
> PCI: Sharing IRQ 11 with 00:11.0
> usb-uhci.c: USB UHCI at I/O 0xdce0, IRQ 11
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> usb.c: registered new driver keyboard
> usbkbd.c: :USB HID Boot Protocol keyboard driver
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> PCI: Found IRQ 11 for device 00:11.0
> PCI: Sharing IRQ 11 with 00:07.2
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 00:11.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xdc80. Vers LK1.1.16
> ***INVALID CHECKSUM 003e*** <6>kjournald starting. Commit interval 5
> seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
>
> krikkit:~# tail -n 100 /var/log/messages
> Apr 18 20:06:06 krikkit kernel: PCI: Using IRQ router PIIX [8086/7110]
> at 00:07.0
> Apr 18 20:06:06 krikkit kernel: Limiting direct PCI/PCI transfers.
> Apr 18 20:06:06 krikkit kernel: Linux NET4.0 for Linux 2.4
> Apr 18 20:06:06 krikkit kernel: Based upon Swansea University Computer
> Society NET3.039
> Apr 18 20:06:06 krikkit kernel: Initializing RT netlink socket
> Apr 18 20:06:06 krikkit kernel: Starting kswapd
> Apr 18 20:06:06 krikkit kernel: VFS: Diskquotas version dquot_6.4.0
> initialized
> Apr 18 20:06:06 krikkit kernel: Journalled Block Device driver loaded
> Apr 18 20:06:07 krikkit kernel: vga16fb: mapped to 0xc00a0000
> Apr 18 20:06:07 krikkit kernel: Console: switching to colour frame
> buffer device 80x30
> Apr 18 20:06:07 krikkit kernel: fb0: VGA16 VGA frame buffer device
> Apr 18 20:06:07 krikkit kernel: pty: 256 Unix98 ptys configured
> Apr 18 20:06:07 krikkit kernel: keyboard: Timeout - AT keyboard not
> present?(ed)
> Apr 18 20:06:07 krikkit kernel: keyboard: Timeout - AT keyboard not
> present?(f4)
> Apr 18 20:06:07 krikkit kernel: Serial driver version 5.05c (2001-07-08)
> with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
> Apr 18 20:06:07 krikkit kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
> Apr 18 20:06:07 krikkit kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Apr 18 20:06:07 krikkit kernel: Real Time Clock Driver v1.10e
> Apr 18 20:06:07 krikkit kernel: block: 128 slots per queue, batch=32
> Apr 18 20:06:07 krikkit kernel: RAMDISK driver initialized: 16 RAM disks
> of 4096K size 1024 blocksize
> Apr 18 20:06:07 krikkit kernel: Uniform Multi-Platform E-IDE driver
> Revision: 6.31
> Apr 18 20:06:07 krikkit kernel: ide: Assuming 33MHz system bus speed for
> PIO modes; override with idebus=xx
> Apr 18 20:06:07 krikkit kernel: PIIX4: IDE controller on PCI bus 00 dev 39
> Apr 18 20:06:07 krikkit kernel: PIIX4: chipset revision 1
> Apr 18 20:06:08 krikkit kernel: PIIX4: not 100%% native mode: will probe
> irqs later
> Apr 18 20:06:08 krikkit kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS
> settings: hda:DMA, hdb:pio
> Apr 18 20:06:08 krikkit kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS
> settings: hdc:DMA, hdd:pio
> Apr 18 20:06:08 krikkit kernel: hda: Maxtor 84320D4, ATA DISK drive
> Apr 18 20:06:08 krikkit kernel: hdc: TOSHIBA CD-ROM XM-6102B, ATAPI
> CD/DVD-ROM drive
> Apr 18 20:06:08 krikkit kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Apr 18 20:06:08 krikkit kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Apr 18 20:06:08 krikkit kernel: hda: 8439184 sectors (4321 MB) w/256KiB
> Cache, CHS=525/255/63
> Apr 18 20:06:08 krikkit kernel: hdc: ATAPI 24X CD-ROM drive, 256kB Cache
> Apr 18 20:06:08 krikkit kernel: Uniform CD-ROM driver Revision: 3.12
> Apr 18 20:06:08 krikkit kernel: ide-floppy driver 0.97.sv
> Apr 18 20:06:08 krikkit kernel: Partition check:
> Apr 18 20:06:08 krikkit kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9
> > Apr 18 20:06:08 krikkit kernel: Floppy drive(s): fd0 is 1.44M
> Apr 18 20:06:08 krikkit kernel: FDC 0 is a National Semiconductor PC87306
> Apr 18 20:06:08 krikkit kernel: Loading I2O Core - (c) Copyright 1999
> Red Hat Software
> Apr 18 20:06:09 krikkit kernel: I2O configuration manager v 0.04.
> Apr 18 20:06:09 krikkit kernel: (C) Copyright 1999 Red Hat Software
> Apr 18 20:06:09 krikkit kernel: loop: loaded (max 8 devices)
> Apr 18 20:06:09 krikkit kernel: Compaq CISS Driver (v 2.4.5)
> Apr 18 20:06:09 krikkit kernel: HDLC support module revision 1.02 for
> Linux 2.4
> Apr 18 20:06:09 krikkit kernel: Cronyx Ltd, Synchronous PPP and CISCO
> HDLC (c) 1994
> Apr 18 20:06:09 krikkit kernel: Linux port (c) 1998 Building Number
> Three Ltd & Jan "Yenya" Kasprzak.
> Apr 18 20:06:09 krikkit kernel: ide-floppy driver 0.97.sv
> Apr 18 20:06:09 krikkit kernel: Highpoint HPT370 Softwareraid driver for
> linux version 0.01
> Apr 18 20:06:09 krikkit kernel: No raid array found
> Apr 18 20:06:09 krikkit kernel: SCSI subsystem driver Revision: 1.00
> Apr 18 20:06:09 krikkit kernel: Red Hat/Adaptec aacraid driver, Apr 14 2002
> Apr 18 20:06:09 krikkit kernel: DC390: 0 adapters found
> Apr 18 20:06:09 krikkit kernel: 3ware Storage Controller device driver
> for Linux v1.02.00.016.
> Apr 18 20:06:09 krikkit kernel: 3w-xxxx: No cards with valid units found.
> Apr 18 20:06:10 krikkit kernel: i2o_scsi.c: Version 0.0.1
> Apr 18 20:06:10 krikkit kernel: chain_pool: 0 bytes @ c1185d80
> Apr 18 20:06:10 krikkit kernel: (512 byte buffers X 4 can_queue X 0
> i2o controllers)
> Apr 18 20:06:10 krikkit kernel: NET4: Linux TCP/IP 1.0 for NET4.0
> Apr 18 20:06:10 krikkit kernel: IP Protocols: ICMP, UDP, TCP, IGMP
> Apr 18 20:06:10 krikkit kernel: IP: routing cache hash table of 512
> buckets, 4Kbytes
> Apr 18 20:06:10 krikkit kernel: TCP: Hash tables configured (established
> 8192 bind 8192)
> Apr 18 20:06:11 krikkit kernel: NET4: Unix domain sockets 1.0/SMP for
> Linux NET4.0.
> Apr 18 20:06:11 krikkit kernel: kjournald starting. Commit interval 5
> seconds
> Apr 18 20:06:11 krikkit kernel: EXT3-fs: mounted filesystem with ordered
> data mode.
> Apr 18 20:06:11 krikkit kernel: VFS: Mounted root (ext3 filesystem)
> readonly.
> Apr 18 20:06:11 krikkit kernel: Freeing unused kernel memory: 280k freed
> Apr 18 20:06:11 krikkit kernel: Adding Swap: 248968k swap-space
> (priority -1)
> Apr 18 20:06:11 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on
> ide0(3,1), internal journal
> Apr 18 20:06:11 krikkit kernel: usb.c: registered new driver usbdevfs
> Apr 18 20:06:11 krikkit kernel: usb.c: registered new driver hub
> Apr 18 20:06:11 krikkit kernel: usb-uhci.c: $Revision: 1.275 $ time
> 10:29:43 Apr 14 2002
> Apr 18 20:06:12 krikkit kernel: usb-uhci.c: High bandwidth mode enabled
> Apr 18 20:06:12 krikkit kernel: PCI: Found IRQ 11 for device 00:07.2
> Apr 18 20:06:12 krikkit kernel: PCI: Sharing IRQ 11 with 00:11.0
> Apr 18 20:06:12 krikkit kernel: usb-uhci.c: USB UHCI at I/O 0xdce0, IRQ 11
> Apr 18 20:06:12 krikkit kernel: usb-uhci.c: Detected 2 ports
> Apr 18 20:06:12 krikkit kernel: usb.c: new USB bus registered, assigned
> bus number 1
> Apr 18 20:06:12 krikkit kernel: hub.c: USB hub found
> Apr 18 20:06:12 krikkit kernel: hub.c: 2 ports detected
> Apr 18 20:06:12 krikkit kernel: usb-uhci.c: v1.275:USB Universal Host
> Controller Interface driver
> Apr 18 20:06:13 krikkit kernel: usb.c: registered new driver keyboard
> Apr 18 20:06:13 krikkit kernel: usbkbd.c: :USB HID Boot Protocol
> keyboard driver
> Apr 18 20:06:13 krikkit kernel: Installing knfsd (copyright (C) 1996
> okir@monad.swb.de).
> Apr 18 20:06:13 krikkit kernel: PCI: Found IRQ 11 for device 00:11.0
> Apr 18 20:06:13 krikkit kernel: PCI: Sharing IRQ 11 with 00:07.2
> Apr 18 20:06:13 krikkit kernel: 3c59x: Donald Becker and others.
> www.scyld.com/network/vortex.html
> Apr 18 20:06:13 krikkit kernel: 00:11.0: 3Com PCI 3c905 Boomerang
> 100baseTx at 0xdc80. Vers LK1.1.16
> Apr 18 20:06:13 krikkit kernel: ***INVALID CHECKSUM 003e***
> <6>kjournald starting. Commit interval 5 seconds
> Apr 18 20:06:13 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on
> ide0(3,6), internal journal
> Apr 18 20:06:14 krikkit kernel: EXT3-fs: mounted filesystem with ordered
> data mode.
> Apr 18 20:06:14 krikkit kernel: kjournald starting. Commit interval 5
> seconds
> Apr 18 20:06:14 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on
> ide0(3,7), internal journal
> Apr 18 20:06:14 krikkit kernel: EXT3-fs: mounted filesystem with ordered
> data mode.
> Apr 18 20:06:14 krikkit kernel: kjournald starting. Commit interval 5
> seconds
> Apr 18 20:06:14 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on
> ide0(3,8), internal journal
> Apr 18 20:06:14 krikkit kernel: EXT3-fs: mounted filesystem with ordered
> data mode.
> Apr 18 20:06:14 krikkit kernel: kjournald starting. Commit interval 5
> seconds
> Apr 18 20:06:14 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on
> ide0(3,9), internal journal
> Apr 18 20:06:14 krikkit kernel: EXT3-fs: mounted filesystem with ordered
> data mode.
>
> Jeg kan ikke se noget, der er galt... Er der nogen andre, der kan? :)
Reply to: