promise PDC20376 onboard på ASUS A7V8X vil ikke virke
Jeg har en Promise PDC20376 onboard raid controller på et ASUS A7V8X mobo.
jeg har en 2.6.7-1-i386 kerne og en debian unstable installation, såvidt jeg
kan læse mig ud af er der fuld understøttelse for min controller i 2.6.7
kernen, men det vil ikke virke.
Fra Dmesg
P_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 4D060H3, ATA DISK drive
hdb: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: PIONEER DVD-RW DVR-107D, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6Y120L0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 120069936 sectors (61475 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 >
hdd: max request size: 128KiB
hdd: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus1/target1/lun0: p1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 497972k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
Real Time Clock Driver v1.12
SCSI subsystem initialized
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as
device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: DVD-ROM GDR8162B Rev: 0017
Type: CD-ROM ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PIONEER Model: DVD-RW DVR-107D Rev: 1.13
Type: CD-ROM ANSI SCSI revision: 02
sr_mod: Unknown symbol cdrom_is_mrw
sr_mod: Unknown symbol register_cdrom
sr_mod: Unknown symbol cdrom_ioctl
sr_mod: Unknown symbol cdrom_is_random_writable
sr_mod: Unknown symbol cdrom_media_changed
sr_mod: Unknown symbol cdrom_release
sr_mod: Unknown symbol cdrom_open
sr_mod: Unknown symbol unregister_cdrom
sr_mod: Unknown symbol cdrom_number_of_slots
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
libata version 1.02 loaded.
sata_promise version 1.00
ata1: SATA max UDMA/133 cmd 0xE08AC200 ctl 0xE08AC238 bmdma 0x0 irq 12
ata2: SATA max UDMA/133 cmd 0xE08AC280 ctl 0xE08AC2B8 bmdma 0x0 irq 12
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0
ata1: no device found (phy stat 00000000)
scsi2 : sata_promise
ata2: no device found (phy stat 00000000)
scsi3 : sata_promise
Capability LSM initialized
NTFS driver 2.1.14 [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
Er der nogen der har en god ide til hvad der går galt, eller hvad jeg har
gjort galt?
Jeg har brugt Debian installer 4 rc1 til at installere med, og er faktisk helt
vild med den.
Regards
Kim
Reply to: