Re: instal·lació targeta tv.
tens creat els /dev/video ???
si? dons llençau com a root???
i si falla contans quien error dona
una alternativa per a veure video es tvtime
ja comptes
On Wed, 2 Mar 2005 02:31:38 +0100, Joan Alfonso <XIPBOIG@terra.es> wrote:
>
>
> Hola: No aconseguisc de poder fer marxar la capturadora tv. Crec què alguna
> cosa malament hi hauré fet. He compilat el kernel 2.6.8 amb les opcions per
> a què puguera sintonitzar-la però.Fent lsmod:apareixen aquestos
> mòduls:Module Size Used by
>
> nvidia 3471196 -
>
> btaudio 15256 -
>
> bttv 146732 -
>
> video_buf 17452 -
>
> i2c_algo_bit 8656 -
>
> v4l2_common 4680 -
>
> btcx_risc 3632 -
>
> videodev 6880 -
>
> tuner 18392 -
>
> i2c_core 18408 -
>
>
>
> Ara lspci:
>
>
>
> 00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture ( rev 11)
>
> 00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
> (rev 11 )
>
> 00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149
> (rev 80 )
>
> 00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT8233/A/ C/VT8235 PIPC Bus Master IDE (rev 06)
>
>
>
> Amb dmesg:
>
>
>
> Linux video capture interface: v1.00
>
> bttv: driver version 0.9.15 loaded
>
> bttv: using 8 buffers with 2080k (520 pages) each for capture
>
> bttv: Bt8xx card found (0).
>
> ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
>
> bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 19, latency: 32, mmio:
> 0xe2000000
>
> bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
>
> bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
>
> tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
>
> bttv: readee error
>
> bttv0: using tuner=-1
>
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
>
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>
> bttv0: registered device video0
>
> bttv0: registered device vbi0
>
> btaudio: driver version 0.7 loaded [digital+analog]
>
> ACPI: PCI interrupt 0000:00:0b.1[A] -> GSI 19 (level, low) -> IRQ 19
>
> btaudio: Bt878 (rev 17) at 00:0b.1, irq: 19, latency: 32, mmio: 0xe2001000
>
> btaudio: using card config "default"
>
> btaudio: registered device dsp2 [digital]
>
> btaudio: registered device dsp3 [analog]
>
> btaudio: registered device mixer2
>
>
>
> He instal·lat motv i xawtv (amb les seues corresponents dependències)
>
> I no hi ha manera. ¿Algú de vosaltres hem podria ajudar?.
>
>
>
> Salut.
>
>
--
Salutacions.
Rafel Puchades
Reply to: