[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#994264: tex-common fails configuration (fmtutil failed) after texlive installation



Package: tex-common
Version: 6.16
Severity: normal

Dear Maintainer,







After installing texlive, apt shows the following:





perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = "",
        LC_ALL = (unset),
        LC_TIME = "en_ZA.UTF-8",
        LC_MONETARY = "en_US.UTF-8",
        LC_ADDRESS = "en_GB.UTF-8",
        LC_TELEPHONE = "en_GB.UTF-8",
        LC_NAME = "en_GB.UTF-8",
        LC_MEASUREMENT = "en_ZA.UTF-8",
        LC_IDENTIFICATION = "en_GB.UTF-8",
        LC_NUMERIC = "en_GB.UTF-8",
        LC_PAPER = "en_GB.UTF-8",
        LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up tex-common (6.16) ...
locale: Cannot set LC_ALL to default locale: No such file or directory
Running mktexlsr. This may take some time... done.
Running updmap-sys. This may take some time... done.
Running mktexlsr /var/lib/texmf ... done.
Building format(s) --all.
        This may take some time...
fmtutil failed. Output has been stored in
/tmp/fmtutil.DCKXFCvl
Please include this file if you report a bug.

dpkg: error processing package tex-common (--configure):
 installed tex-common package post-installation script subprocess returned
error exit status 1
Errors were encountered while processing:
 tex-common
E: Sub-process /usr/bin/dpkg returned an error code (1)








The output file /tmp/fmtutil.DCKXFCvl is long; I've attached the full file, but
the lines which are showing errors are as follows:



fmtutil [INFO]: log file copied to: /var/lib/texmf/web2c/metafont/mf.log
fmtutil [INFO]: /var/lib/texmf/web2c/metafont/mf.base installed.
fmtutil [ERROR]: running `luahbtex -ini   -jobname=luahbtex -progname=luahbtex
luatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log luahbtex.log to: /var/lib/texmf/web2c/luahbtex
fmtutil [ERROR]: returning error due to option --strict
fmtutil [ERROR]: running `luatex -ini   -jobname=luatex -progname=luatex
luatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log luatex.log to: /var/lib/texmf/web2c/luatex
fmtutil [ERROR]: returning error due to option --strict
fmtutil [ERROR]: running `luatex -ini   -jobname=dviluatex -progname=dviluatex
dviluatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log dviluatex.log to: /var/lib/texmf/web2c/luatex
fmtutil [ERROR]: returning error due to option --strict
fmtutil [INFO]: successfully rebuilt formats: 5
fmtutil [INFO]: failed to build: 3 (luahbtex/luahbtex luatex/luatex
luatex/dviluatex)
fmtutil [INFO]: total formats: 8
fmtutil [INFO]: exiting with status 3













The error remains after trying dpkg --configure -a or apt --fix-broken install.

I've tried purging everything tex- or texlive-related and reinstalling several
times, including installs of the texlive package (and dependencies), the
texlive-base package, or the kile package (which brings in a whole bunch of
texlive-related packages). Each try gets the same error, with possibly
different contents of the /tmp/fmtutil.XXXXXXXX file.

For example, installs from texlive-base had
fmtutil [INFO]: exiting with status 3
while installs from texlive had
fmtutil [INFO]: exiting with status 5.
I'm not sure if this difference is relevant.


I've seen many other bug reports involving configuration problems for tex-
common due to fmtutil failure. I don't really know enough to say how/whether
they are related to my issue; apologies if I missed something obvious.










-- System Information:
Debian Release: 11.0
  APT prefers stable-security
  APT policy: (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.10.0-8-amd64 (SMP w/4 CPU threads)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=locale: Cannot set
LC_ALL to default locale: No such file or directory
UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages tex-common depends on:
ii  dpkg  1.20.9
ii  ucf   3.0043

tex-common recommends no packages.

Versions of packages tex-common suggests:
pn  debhelper  <none>

Versions of packages texlive-base depends on:
ii  debconf [debconf-2.0]  1.5.77
ii  libpaper-utils         1.1.28+b1
ii  sensible-utils         0.0.14
ii  texlive-binaries       2020.20200327.54578-7
ii  ucf                    3.0043
ii  xdg-utils              1.1.3-4.1

Versions of packages texlive-base recommends:
ii  lmodern  2.004.5-6.1

Versions of packages texlive-base suggests:
ii  ghostscript [postscript-viewer]  9.53.3~dfsg-7+deb11u1
ii  okular [postscript-viewer]       4:20.12.3-2
ii  perl-tk                          1:804.035-0.1+b1
pn  xpdf | pdf-viewer                <none>
pn  xzdec                            <none>

Versions of packages texlive-binaries depends on:
ii  dpkg            1.20.9
ii  install-info    6.7.0.dfsg.2-6
ii  libc6           2.31-13
ii  libcairo2       1.16.0-5
ii  libfontconfig1  2.13.1-4.2
ii  libfreetype6    2.10.4+dfsg-1
ii  libgcc-s1       10.2.1-6
ii  libgraphite2-3  1.3.14-1
ii  libharfbuzz0b   2.7.4-1
ii  libicu67        67.1-7
ii  libkpathsea6    2020.20200327.54578-7
ii  libmpfr6        4.1.0-3
ii  libpaper1       1.1.28+b1
ii  libpixman-1-0   0.40.0-1
ii  libpng16-16     1.6.37-3
ii  libptexenc1     2020.20200327.54578-7
ii  libstdc++6      10.2.1-6
ii  libsynctex2     2020.20200327.54578-7
ii  libteckit0      2.5.10+ds1-3
ii  libtexlua53     2020.20200327.54578-7
ii  libtexluajit2   2020.20200327.54578-7
ii  libx11-6        2:1.7.2-1
ii  libxaw7         2:1.0.13-1.1
ii  libxi6          2:1.7.10-1
ii  libxmu6         2:1.1.2-2+b3
ii  libxpm4         1:3.5.12-1
ii  libxt6          1:1.2.0-1
ii  libzzip-0-13    0.13.62-3.3
ii  perl            5.32.1-4+deb11u1
ii  t1utils         1.41-4
ii  zlib1g          1:1.2.11.dfsg-2

Versions of packages texlive-binaries recommends:
ii  dvisvgm       2.11.1-1
ii  texlive-base  2020.20210202-3

-- debconf information:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = "",
        LC_ALL = (unset),
        LC_TIME = "en_ZA.UTF-8",
        LC_MONETARY = "en_US.UTF-8",
        LC_ADDRESS = "en_GB.UTF-8",
        LC_TELEPHONE = "en_GB.UTF-8",
        LC_NAME = "en_GB.UTF-8",
        LC_MEASUREMENT = "en_ZA.UTF-8",
        LC_IDENTIFICATION = "en_GB.UTF-8",
        LC_NUMERIC = "en_GB.UTF-8",
        LC_PAPER = "en_GB.UTF-8",
        LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
locale: Cannot set LC_ALL to default locale: No such file or directory
  texlive-base/binary_chooser: pdftex, dvips, dvipdfmx, xdvi
fmtutil: fmtutil is using the following fmtutil.cnf files (in precedence order):
fmtutil:   /usr/share/texmf/web2c/fmtutil.cnf
fmtutil:   /usr/share/texlive/texmf-dist/web2c/fmtutil.cnf
fmtutil: fmtutil is using the following fmtutil.cnf file for writing changes:
fmtutil:   /etc/texmf/web2c/fmtutil.cnf
fmtutil [INFO]: writing formats under /var/lib/texmf/web2c
fmtutil [INFO]: --- remaking luatex with luatex
fmtutil: running `luatex -ini   -jobname=luatex -progname=luatex luatex.ini' ...
Unable to read environment locale: exit now.
fmtutil [INFO]: --- remaking pdftex with pdftex
fmtutil: running `pdftex -ini   -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.21 (TeX Live 2020/Debian) (INITEX)
 restricted \write18 enabled.
 (/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/plain/config/pdfetex.ini
(/var/lib/texmf/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/plain/etex/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation; 
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse, 
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdftexmagfix.tex) )
Beginning to dump on file pdftex.fmt
 (preloaded format=pdftex 2021.9.14)
2906 strings of total length 43222
7960 memory locations dumped; current usage is 203&7321
1266 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
  181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on pdftex.log.
fmtutil [INFO]: log file copied to: /var/lib/texmf/web2c/pdftex/pdftex.log
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/pdftex.fmt installed.
fmtutil [INFO]: --- remaking luahbtex with luahbtex
fmtutil: running `luahbtex -ini   -jobname=luahbtex -progname=luahbtex luatex.ini' ...
Unable to read environment locale: exit now.
fmtutil [INFO]: --- remaking tex with tex
fmtutil: running `tex -ini   -jobname=tex -progname=tex tex.ini' ...
This is TeX, Version 3.14159265 (TeX Live 2020/Debian) (INITEX)
(/usr/share/texlive/texmf-dist/tex/plain/config/tex.ini
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex)) )
Beginning to dump on file tex.fmt
 (preloaded format=tex 2021.9.14)
2027 strings of total length 29296
4990 memory locations dumped; current usage is 110&4877
926 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
  181 for language 0
No pages of output.
Transcript written on tex.log.
fmtutil [INFO]: log file copied to: /var/lib/texmf/web2c/tex/tex.log
fmtutil [INFO]: /var/lib/texmf/web2c/tex/tex.fmt installed.
fmtutil [INFO]: --- remaking mf with mf-nowin
fmtutil: running `mf-nowin -ini   -jobname=mf -progname=mf -translate-file=cp227.tcx mf.ini' ...
This is METAFONT, Version 2.7182818 (TeX Live 2020/Debian) (INIMF)
(/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
(/usr/share/texlive/texmf-dist/metafont/config/mf.ini
(/usr/share/texlive/texmf-dist/metafont/base/plain.mf
Preloading the plain base, version 2.71: preliminaries,
 basic constants and mathematical macros,
 macros for converting from device-independent units to pixels,
 macros and tables for various modes of operation,
 macros for drawing and filling,
 macros for proof labels and rules,
 macros for character and font administration,
and a few last-minute items.)
(/usr/share/texlive/texmf-dist/fonts/source/public/modes/modes.mf) )
Beginning to dump on file mf.base
 (preloaded base=mf 2021.9.14)
2237 strings of total length 30210
11955 memory locations dumped; current usage is 3679&7916
1011 symbolic tokens
Transcript written on mf.log.
fmtutil [INFO]: log file copied to: /var/lib/texmf/web2c/metafont/mf.log
fmtutil [INFO]: /var/lib/texmf/web2c/metafont/mf.base installed.
fmtutil [INFO]: --- remaking pdfetex with pdftex
fmtutil: running `pdftex -ini   -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.21 (TeX Live 2020/Debian) (INITEX)
 restricted \write18 enabled.
 (/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/plain/config/pdfetex.ini
(/var/lib/texmf/tex/generic/tex-ini-files/pdftexconfig.tex)
(/usr/share/texlive/texmf-dist/tex/plain/etex/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation; 
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse, 
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,)
(/usr/share/texlive/texmf-dist/tex/plain/config/pdftexmagfix.tex) )
Beginning to dump on file pdfetex.fmt
 (preloaded format=pdfetex 2021.9.14)
2906 strings of total length 43225
7960 memory locations dumped; current usage is 203&7321
1266 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
  181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on pdfetex.log.
fmtutil [INFO]: log file copied to: /var/lib/texmf/web2c/pdftex/pdfetex.log
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/pdfetex.fmt installed.
fmtutil [INFO]: --- remaking dviluatex with luatex
fmtutil: running `luatex -ini   -jobname=dviluatex -progname=dviluatex dviluatex.ini' ...
Unable to read environment locale: exit now.
fmtutil [INFO]: --- remaking etex with pdftex
fmtutil: running `pdftex -ini   -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' ...
This is pdfTeX, Version 3.14159265-2.6-1.40.21 (TeX Live 2020/Debian) (INITEX)
 restricted \write18 enabled.
 (/usr/share/texlive/texmf-dist/web2c/cp227.tcx)
entering extended mode
(/usr/share/texlive/texmf-dist/tex/plain/config/etex.ini
(/usr/share/texlive/texmf-dist/tex/plain/etex/etex.src
(/usr/share/texlive/texmf-dist/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texlive/texmf-dist/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/var/lib/texmf/tex/generic/config/language.def
(/usr/share/texlive/texmf-dist/tex/generic/hyphen/hyphen.tex))
Augmenting the Plain TeX definitions: \tracingall;
Adding new e-TeX definitions: \eTeX, \loggingall, \tracingnone,
register allocation; extended register allocation; 
Recycling: \addlanguage, \@nswer (not defined), \@sk, \b@dresponsetrue,
\b@dresponsefalse, \ch@ckforyn, \mayber@cycle, \et@xabort, \et@xbuf,
\et@xfmtsrc, \et@xfilehdr, \et@xinf, \et@xpatterns, \l@ngdefnfile, \n@xt,
\p@rse (not defined), \pr@mpt (not defined), \pr@mptloop (not defined),
\forcer@cycle, \usef@llback, \usef@llbacktrue, \usef@llbackfalse, 
Retaining: \et@xerr, \et@xinput, \et@xlibhdr, \et@xmsg, \et@xtoks, \et@xwarn,
\et@xl@@d, \et@xl@ad, \et@xload, \et@xlang, \et@xhash, \eTeX, \etexhdrchk,
\etexstatus, \module, \uselanguage, \r@tain, \r@cycle,) )
Beginning to dump on file etex.fmt
 (preloaded format=etex 2021.9.14)
2896 strings of total length 42869
7960 memory locations dumped; current usage is 203&7290
1264 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
  181 for language 0
0 words of pdfTeX memory
0 indirect objects
No pages of output.
Transcript written on etex.log.
fmtutil [INFO]: log file copied to: /var/lib/texmf/web2c/pdftex/etex.log
fmtutil [INFO]: /var/lib/texmf/web2c/pdftex/etex.fmt installed.
fmtutil [ERROR]: running `luatex -ini   -jobname=luatex -progname=luatex luatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log luatex.log to: /var/lib/texmf/web2c/luatex
fmtutil [ERROR]: returning error due to option --strict
fmtutil [ERROR]: running `luahbtex -ini   -jobname=luahbtex -progname=luahbtex luatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log luahbtex.log to: /var/lib/texmf/web2c/luahbtex
fmtutil [ERROR]: returning error due to option --strict
fmtutil [ERROR]: running `luatex -ini   -jobname=dviluatex -progname=dviluatex dviluatex.ini </dev/null' return status: 1
fmtutil [ERROR]: cannot copy log dviluatex.log to: /var/lib/texmf/web2c/luatex
fmtutil [ERROR]: returning error due to option --strict
fmtutil [INFO]: successfully rebuilt formats: 5
fmtutil [INFO]: failed to build: 3 (luatex/luatex luahbtex/luahbtex luatex/dviluatex)
fmtutil [INFO]: total formats: 8
fmtutil [INFO]: exiting with status 3

Reply to: