Bug#866116: texlive-base: TeX capacity exceeded, sorry: \bbl@tempe USenglish
Package: texlive-base
Version: 2017.20170627-1
Severity: important
This is a follow-up of sorts from #865323 using the same reduced
example (not Norbert’s MWE), which I’ll attach again to decouple
from the original bugreport.
I believe it’s related to loading babel.
-----cutting here may damage your screen surface-----
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex)
restricted \write18 enabled.
entering extended mode
(./x.tex
LaTeX2e <2017-04-15>
Babel <3.11> and hyphenation patterns for 84 language(s) loaded.
(/usr/share/texlive/texmf-dist/tex/latex/koma-script/scrartcl.cls
Document Class: scrartcl 2017/04/13 v3.23 KOMA-Script document class (article)
(/usr/share/texlive/texmf-dist/tex/latex/koma-script/scrkbase.sty
(/usr/share/texlive/texmf-dist/tex/latex/koma-script/scrbase.sty
(/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty)
(/usr/share/texlive/texmf-dist/tex/latex/koma-script/scrlfile.sty
Package scrlfile, 2017/04/13 v3.23 KOMA-Script package (loading files)
Copyright (C) Markus Kohm
))) (/usr/share/texlive/texmf-dist/tex/latex/koma-script/tocbasic.sty)
(/usr/share/texlive/texmf-dist/tex/latex/koma-script/scrsize11pt.clo)
(/usr/share/texlive/texmf-dist/tex/latex/koma-script/typearea.sty))
Class scrartcl Warning: Usage of package `fancyhdr' together
(scrartcl) with a KOMA-Script class is not recommended.
(scrartcl) I'd suggest to use
(scrartcl) package `scrlayer-scrpage'.
(scrartcl) Nevertheless, using requested
(scrartcl) package `fancyhdr' on input line 4.
(/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty)
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/accsupp.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/pdfescape.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty)))
(/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty)))
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/accsupp-pdftex.def))
(/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty
(/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def
(/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu)
(/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu)
(/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu)))
(/usr/share/texlive/texmf-dist/tex/generic/german/german.sty v2.5e 1998-07-08)
(/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty
(/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def)
(/usr/share/texlive/texmf-dist/tex/generic/babel-german/german.ldf
(/usr/share/texlive/texmf-dist/tex/generic/babel-german/germanb.ldf
(/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def
(/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def))
! TeX capacity exceeded, sorry [input stack size=5000].
<argument> \bbl@tempe
USenglish
l.52 ...Init\CurrentOption{captions\CurrentOption}
! ==> Fatal error occurred, no output PDF file produced!
Transcript written on x.log.
-----cutting here may damage your screen surface-----
######################################
List of ls-R files
-rw-rw-r-- 1 root staff 80 Jan 15 2016 /usr/local/share/texmf/ls-R
-rw-r--r-- 1 root root 1910 Jun 27 14:42 /var/lib/texmf/ls-R
lrwxrwxrwx 1 root root 29 Jun 24 14:20 /usr/share/texmf/ls-R -> /var/lib/texmf/ls-R-TEXMFMAIN
lrwxrwxrwx 1 root root 31 Jun 27 03:19 /usr/share/texlive/texmf-dist/ls-R -> /var/lib/texmf/ls-R-TEXLIVEDIST
lrwxrwxrwx 1 root root 31 Jun 27 03:19 /usr/share/texlive/texmf-dist/ls-R -> /var/lib/texmf/ls-R-TEXLIVEDIST
######################################
Config files
lrwxrwxrwx 1 root root 40 Jun 27 03:19 /usr/share/texmf/web2c/texmf.cnf -> ../../texlive/texmf-dist/web2c/texmf.cnf
lrwxrwxrwx 1 root root 33 Jun 27 03:19 /usr/share/texmf/web2c/fmtutil.cnf -> /var/lib/texmf/fmtutil.cnf-DEBIAN
lrwxrwxrwx 1 root root 32 Jun 27 03:19 /usr/share/texmf/web2c/updmap.cfg -> /var/lib/texmf/updmap.cfg-DEBIAN
-rw-r--r-- 1 root root 5068 Jun 27 14:40 /var/lib/texmf/tex/generic/config/language.dat
######################################
Files in /etc/texmf/web2c/
total 8
-rw-r--r-- 1 root root 283 Jun 15 2013 mktex.cnf
-rw-r--r-- 1 root root 838 Jun 27 14:37 texmf.cnf
######################################
md5sums of texmf.d
ca40c66f144b4bafc3e59a2dd32ecb9c /etc/texmf/texmf.d/00debian.cnf
1df66bc319cec731e202eaf39f5d85e1 /etc/texmf/texmf.d/96JadeTeX.cnf
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.9.0-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=C (charmap=UTF-8)
Shell: /bin/sh linked to /bin/lksh
Init: sysvinit (via /sbin/init)
Versions of packages texlive-base depends on:
ii debconf [debconf-2.0] 1.5.61
ii libpaper-utils 1.1.24+nmu5
ii tex-common 6.07
ii texlive-binaries 2017.20170613.44572-2
ii ucf 3.0036
ii xdg-utils 1.1.1-1
Versions of packages texlive-base recommends:
ii lmodern 2.004.5-3
Versions of packages texlive-base suggests:
ii ghostscript [postscript-viewer] 9.21~dfsg-1
ii gv [postscript-viewer] 1:3.7.4-1+b1
ii mupdf [pdf-viewer] 1.9a+ds1-4
ii okular [postscript-viewer] 4:16.08.2-1+b1
ii perl-tk 1:804.033-1+b3
Versions of packages tex-common depends on:
ii dpkg 1.18.24
ii ucf 3.0036
Versions of packages tex-common suggests:
ii debhelper 10.5.1
Versions of packages texlive-base is related to:
ii tex-common 6.07
ii texlive-binaries 2017.20170613.44572-2
-- debconf information:
texlive-base/binary_chooser: pdftex, dvips, dvipdfmx, xdvi
tex-common/check_texmf_wrong:
texlive-base/texconfig_ignorant:
tex-common/check_texmf_missing:
\PassOptionsToPackage{paper=21truecm:28truecm}{typearea}
\documentclass{scrartcl}
\RequirePackage{fancyhdr}
\RequirePackage{accsupp}
\RequirePackage[utf8]{inputenc}
\RequirePackage{german}
\RequirePackage[german]{babel}
\RequirePackage[usenames,dvipsnames,table]{xcolor}
\RequirePackage[LY1,TS1,T1]{fontenc}
\RequirePackage[paperwidth=21truecm,paperheight=28truecm,includeheadfoot,inner=1.9cm,outer=1.8cm,top=1.78cm,bottom=1.5cm,twoside,headheight=1.1cm,headsep=0.9cm,foot=1.2cm,marginparsep=2.5mm]{geometry}
\RequirePackage{fancybox}
\linespread{1.15}
\RequirePackage[varqu,varl]{inconsolata}
\usepackage[writefile]{listings}
\usepackage{float}
\RequirePackage{graphicx}%
\RequirePackage{pifont}%
\RequirePackage{textcomp}%
\makeatletter%
\DeclareRobustCommand{\unicodepoints@flipsym}[1]{\scalebox{-1}[1]{#1}}%
\makeatother%
\usepackage[pdftex,unicode]{hyperref}%
\hypersetup{
colorlinks = true,
linkcolor = blue,
urlcolor = blue,
citecolor = blue,
pdfauthor = {tarent solutions GmbH}
}
\pagestyle{fancy}
\addtokomafont{pageheadfoot}{\upshape}
\fancyhf{}
% Hurenkinder und Schusterjungen
\clubpenalty10000
\widowpenalty10000
\displaywidowpenalty=10000
% Zu lange Zeilen
\emergencystretch 5em%
\setlength{\parskip}{0.3cm plus 5mm minus 1mm}
\setlength{\parindent}{0cm}
\makeatletter
\lstset{
backgroundcolor=\color{gray},
breakatwhitespace=true,
rulecolor=\color{black},
basicstyle=\ttfamily,
upquote=true,
keepspaces,
literate=
{á}{{\'a}}1 {é}{{\'e}}1 {í}{{\'i}}1 {ó}{{\'o}}1 {ú}{{\'u}}1
{Á}{{\'A}}1 {É}{{\'E}}1 {Í}{{\'I}}1 {Ó}{{\'O}}1 {Ú}{{\'U}}1
{à}{{\`a}}1 {è}{{\`e}}1 {ì}{{\`i}}1 {ò}{{\`o}}1 {ù}{{\`u}}1
{À}{{\`A}}1 {È}{{\'E}}1 {Ì}{{\`I}}1 {Ò}{{\`O}}1 {Ù}{{\`U}}1
{ä}{{\"a}}1 {ë}{{\"e}}1 {ï}{{\"i}}1 {ö}{{\"o}}1 {ü}{{\"u}}1
{Ä}{{\"A}}1 {Ë}{{\"E}}1 {Ï}{{\"I}}1 {Ö}{{\"O}}1 {Ü}{{\"U}}1
{â}{{\^a}}1 {ê}{{\^e}}1 {î}{{\^i}}1 {ô}{{\^o}}1 {û}{{\^u}}1
{Â}{{\^A}}1 {Ê}{{\^E}}1 {Î}{{\^I}}1 {Ô}{{\^O}}1 {Û}{{\^U}}1
{æ}{{\ae}}1 {Æ}{{\AE}}1 {ß}{{\ss}}1 {œ}{{\oe}}1 {Œ}{{\OE}}1
{ő}{{\H{o}}}1 {Ő}{{\H{O}}}1 {ű}{{\H{u}}}1 {Ű}{{\H{U}}}1
{å}{{\r a}}1 {Å}{{\r A}}1 {ç}{{\c c}}1 {Ç}{{\c C}}1 {ø}{{\o}}1
{©}{{\textcopyright}}1 {™}{\texttrademark}1 {–}{-}1 {§}{\S}1
{£}{{\pounds}}1 {°}{\textdegree{}}1 {„}{{\quotedblbase}}1
{“}{{\textquotedblleft}}1 {”}{{\textquotedblright}}1
{‘}{{\textquoteleft}}1 {’}{{\textquoteright}}1
{«}{\guillemotleft}1 {»}{\guillemotright}1
{€}{{\fontencoding{LY1}\selectfont\symbol{'001}}}1
{…}{{\fontencoding{LY1}\selectfont\symbol{'205}}}1,
columns=flexible,
showstringspaces=false,
extendedchars=true,
breaklines=true,
prebreak=\unicodepoints@flipsym{\color{red}\ding{229}},
frame=single,
showtabs=false,
showspaces=false,
showstringspaces=false,
escapeinside={〈}{〉},
keywordstyle=\color{blue},
commentstyle=\color{ForestGreen},
stringstyle=\color{RedOrange},
% für 〔Paßwörter〕 und 「variable Texte」 in Listings
moredelim=[is][\color{ForestGreen}]{〔}{〕},
moredelim=*[is][\color{RedOrange}]{「}{」},
}
\makeatother%
\begin{document}
\section{Einleitung}\label{sec:intro}
\subsection{Über dieses Dokument}\label{subsec:aboutmanual}
bla
\newpage\appendix
\section{Installationsanleitung}\label{sec:setup}
\subsection{Vorbereitung Frontend}\label{subsec:setup-fe-prep}
bla
\begin{minipage}{\textwidth}
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
\begin{minipage}{\textwidth}
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
\begin{minipage}{\textwidth}
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
\begin{minipage}{\textwidth}
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
bla
\begin{minipage}{\textwidth}
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
bla
\begin{minipage}{\textwidth}
bla
\begin{lstlisting}
bla
\end{lstlisting}
bla
\end{minipage}
\subsection{Installation Frontend}\label{subsec:setup-fe}
bla
\begin{minipage}{\textwidth}
bla
\begin{lstlisting}
bla
\end{lstlisting}
bla
\begin{lstlisting}
bla
\end{lstlisting}
bla
\end{minipage}
\begin{minipage}{\textwidth}
bla
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
bla
\begin{minipage}{\textwidth}
bla
\begin{lstlisting}{FE apache2 start}
bla
bla
\end{lstlisting}
\end{minipage}
\subsection{Installation Backend}\label{subsec:setup-be}
bla
\begin{minipage}{\textwidth}
bla
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
bla
bla
\begin{minipage}{\textwidth}
bla
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
bla
\begin{minipage}{\textwidth}
bla
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
\begin{minipage}{\textwidth}
bla
\begin{lstlisting}
bla
\end{lstlisting}
\end{minipage}
\subsection{Installation der Anwendung}\label{subsec:install}
Datenbank korrekt zu initialisieren; sie wird hierbei nicht
fehlerfrei durchstarten und muß danach sofort wieder beendet
werden, damit die Konfigurationsparameter in der Datenbank
angepaßt werden könenn.
\subsubsection{Erstes Hochfahren des Backends}\label{subsubsec:install-firstback}
bla
\begin{minipage}{\textwidth}
\begin{lstlisting}
2017-02-06 22:47:03.864 [localhost-startStop-1] INFO [DbMigrate] : Schema "public" is up to date. No migration necessary.
\end{lstlisting}
\end{minipage}
\begin{minipage}{\textwidth}
Stoppen Sie nun den Applikationsserver wieder:
\begin{lstlisting}{first tomcat stop}
sudo service tomcat7 stop
\end{lstlisting}
\end{minipage}
\subsubsection{Erstkonfiguration}\label{subsubsec:install-firstconfig}
Kopieren Sie die Datei \texttt{config.sql} aus dem „files“-Tarball
auf den Host und bearbeiten Sie sie, indem Sie mindestens für die
Elasticsearch- und LDAP-Konfiguration passende Werte eintragen;
siehe hierzu auch Kapitel \nameref{subsubsec:config-global}.
Desweiteren müssen Sie mindestens einen User mit der Admin-Rolle
anlegen, um sich einloggen und die Benutzerverwaltung nutzen zu können.
\begin{minipage}{\textwidth}
Dann schreiben Sie die Konfigurationswerte in die Datenbank, entweder
nur die geänderten Werte, oder die ganze Datei:
\begin{lstlisting}{Import config.sql}
psql -U 「tooluser」 -h 127.0.0.1 -W 「tooldb」
\i config.sql
\q
\end{lstlisting}
\end{minipage}
\end{document}
Reply to: