Re: texlive 2008
Am Montag, 4. Mai 2009 schrieb Norbert Preining:
> On So, 03 Mai 2009, Martin Bretschneider wrote:
> > I updated with "aptitude dist-upgrade" to be sure. There are some
> > errors during the upgradee since some files seem to be in different
> > packages
>
> Many of course, thanks for testing. Yes, we need loads of Replaces to
> fix that.
>
> Can you test installation in a clean system, so from scratch without
> tl2007 being installed?
OK, I purged all tex packages and did a clean install with
aptitude --without-recommends install texlive
and get some errors from fmtutil-sys that are in the attachment in
aptitude3.log. I also attached the log files from these from /tmp/. It
seems to me that /usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex
causes the problems in all (?) cases:
"! I can't find file `dehypht-x-2008-06-18.tex'."
Kind regards from Germany
Martin
--
http://www.bretschneidernet.de/ OpenPGP-key: 0x4EA52583
(o_ Ernest Hemingway:
(o_ (o_ (o_ //\ I like to listen. I have learned a great deal
(\)_(\)_(\)_V_/_ from listening carefully. Most people never listen.
# aptitude --without-recommends install texlive
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Lese Status-Informationen ein... Fertig
Lese erweiterte Statusinformationen
Initialisiere Paketstatus... Fertig
Lese Task-Beschreibungen... Fertig
Die folgenden NEUEN Pakete werden zusätzlich installiert:
tex-common{a} texlive texlive-base{a} texlive-base-bin{a} texlive-common{a} texlive-doc-base{a} texlive-fonts-recommended{a} texlive-latex-base{a}
texlive-latex-recommended{a}
Die folgenden Pakete werden EMPFOHLEN, aber NICHT installiert:
dvipdfmx latex-beamer latex-xcolor lmodern luatex prosper texlive-base-bin-doc texlive-fonts-recommended-doc texlive-latex-base-doc
texlive-latex-recommended-doc tipa
0 Pakete aktualisiert, 9 zusätzlich installiert, 0 werden entfernt und 0 nicht aktualisiert.
Muss 25,4kB/25,9MB an Archiven herunterladen. Nach dem Entpacken werden 83,0MB zusätzlich belegt sein.
Wollen Sie fortsetzen? [Y/n/?] y
WARNUNG: nichtvertrauenswürdige Versionen der folgenden Pakete werden installiert!
Nichtvertrauenswürdige Pakete können die Sicherheit Ihres Systems gefährden.
Sie sollten nur dann mit der Installation fortfahren, wenn Sie sicher sind, dass
Sie dies wirklich wollen.
texlive-base texlive texlive-fonts-recommended texlive-common texlive-base-bin texlive-latex-recommended texlive-latex-base texlive-doc-base
Wollen Sie diese Warnung ignorieren und trotzdem weitermachen?
Geben Sie zum Weitermachen »Ja«, zum Abbrechen »Nein« ein: Ja
Schreibe erweiterte Statusinformationen... Fertig
Hole:1 http://people.debian.org tl2008/ texlive 2008.svn12355-1 [25,4kB]
25,4kB wurden in 1s heruntergeladen (21,9kB/s)
Vorkonfiguration der Pakete ...
Wähle vormals abgewähltes Paket tex-common.
(Lese Datenbank ... 48945 Dateien und Verzeichnisse sind derzeit installiert.)
Entpacke tex-common (aus .../tex-common_1.18_all.deb) ...
Wähle vormals abgewähltes Paket texlive-common.
Entpacke texlive-common (aus .../texlive-common_2008.svn12355-1_all.deb) ...
Wähle vormals abgewähltes Paket texlive-doc-base.
Entpacke texlive-doc-base (aus .../texlive-doc-base_2008.svn12355-1_all.deb) ...
Wähle vormals abgewähltes Paket texlive-base-bin.
Entpacke texlive-base-bin (aus .../texlive-base-bin_2008.svn12355-1_i386.deb) ...
Wähle vormals abgewähltes Paket texlive-base.
Entpacke texlive-base (aus .../texlive-base_2008.svn12355-1_all.deb) ...
Wähle vormals abgewähltes Paket texlive-fonts-recommended.
Entpacke texlive-fonts-recommended (aus .../texlive-fonts-recommended_2008.svn12355-1_all.deb) ...
Wähle vormals abgewähltes Paket texlive-latex-base.
Entpacke texlive-latex-base (aus .../texlive-latex-base_2008.svn12355-1_all.deb) ...
Wähle vormals abgewähltes Paket texlive-latex-recommended.
Entpacke texlive-latex-recommended (aus .../texlive-latex-recommended_2008.svn12355-1_all.deb) ...
Wähle vormals abgewähltes Paket texlive.
Entpacke texlive (aus .../texlive_2008.svn12355-1_all.deb) ...
Verarbeite Trigger für man-db ...
Verarbeite Trigger für menu ...
Richte tex-common ein (1.18) ...
Creating config file /etc/texmf/texmf.d/05TeXMF.cnf with new version
Creating config file /etc/texmf/texmf.d/15Plain.cnf with new version
Creating config file /etc/texmf/texmf.d/45TeXinputs.cnf with new version
Creating config file /etc/texmf/texmf.d/55Fonts.cnf with new version
Creating config file /etc/texmf/texmf.d/65BibTeX.cnf with new version
Creating config file /etc/texmf/texmf.d/75DviPS.cnf with new version
Creating config file /etc/texmf/texmf.d/85Misc.cnf with new version
Creating config file /etc/texmf/texmf.d/90TeXDoc.cnf with new version
Creating config file /etc/texmf/texmf.d/95NonPath.cnf with new version
Creating config file /etc/texmf/updmap.d/00updmap.cfg with new version
Creating config file /etc/texmf/texmf.cnf with new version
Running mktexlsr. This may take some time... done.
Running updmap-sys. This may take some time... done.
Building format(s) --all.
This may take some time... done.
Richte texlive-common ein (2008.svn12355-1) ...
Richte texlive-doc-base ein (2008.svn12355-1) ...
Running mktexlsr. This may take some time... done.
Richte texlive-base-bin ein (2008.svn12355-1) ...
Running mktexlsr. This may take some time... done.
Building format(s) --all.
This may take some time...
fmtutil-sys failed. Output has been stored in
/tmp/fmtutil.XXxxXpgB
Please include this file if you report a bug.
dpkg: Fehler beim Bearbeiten von texlive-base-bin (--configure):
Unterprozess post-installation script gab den Fehlerwert 1 zurück
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive-base:
texlive-base hängt ab von texlive-base-bin (>= 2008); aber:
Paket texlive-base-bin ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive-base (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive-fonts-recommended:
texlive-fonts-recommended hängt ab von texlive-base (>= 2008); aber:
Paket texlive-base ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive-fonts-recommended (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive-latex-base:
texlive-latex-base hängt ab von texlive-base (>= 2008); aber:
Paket texlive-base ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive-latex-base (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive-latex-recommended:
texlive-latex-recommended hängt ab von texlive-latex-base (>= 2008); aber:
Paket texlive-latex-base ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive-latex-recommended (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive:
texlive hängt ab von texlive-fonts-recommended (>= 2008); aber:
Paket texlive-fonts-recommended ist noch nicht konfiguriert.
texlive hängt ab von texlive-latex-recommended (>= 2008); aber:
Paket texlive-latex-recommended ist noch nicht konfiguriert.
texlive hängt ab von texlive-latex-base (>= 2008); aber:
Paket texlive-latex-base ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
Verarbeite Trigger für menu ...
Fehler traten auf beim Bearbeiten von:
texlive-base-bin
texlive-base
texlive-fonts-recommended
texlive-latex-base
texlive-latex-recommended
texlive
E: Sub-process /usr/bin/dpkg returned an error code (1)
Ein Paket konnte nicht installiert werden. Versuche zu lösen:
Richte texlive-base-bin ein (2008.svn12355-1) ...
Running mktexlsr. This may take some time... done.
Building format(s) --all.
This may take some time...
fmtutil-sys failed. Output has been stored in
/tmp/fmtutil.XXoTnPz8
Please include this file if you report a bug.
dpkg: Fehler beim Bearbeiten von texlive-base-bin (--configure):
Unterprozess post-installation script gab den Fehlerwert 1 zurück
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive-base:
texlive-base hängt ab von texlive-base-bin (>= 2008); aber:
Paket texlive-base-bin ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive-base (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive-fonts-recommended:
texlive-fonts-recommended hängt ab von texlive-base (>= 2008); aber:
Paket texlive-base ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive-fonts-recommended (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive-latex-base:
texlive-latex-base hängt ab von texlive-base (>= 2008); aber:
Paket texlive-base ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive-latex-base (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive:
texlive hängt ab von texlive-fonts-recommended (>= 2008); aber:
Paket texlive-fonts-recommended ist noch nicht konfiguriert.
texlive hängt ab von texlive-latex-base (>= 2008); aber:
Paket texlive-latex-base ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von texlive-latex-recommended:
texlive-latex-recommended hängt ab von texlive-latex-base (>= 2008); aber:
Paket texlive-latex-base ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von texlive-latex-recommended (--configure):
Abhängigkeitsprobleme - lasse es unkonfiguriert
Verarbeite Trigger für menu ...
Fehler traten auf beim Bearbeiten von:
texlive-base-bin
texlive-base
texlive-fonts-recommended
texlive-latex-base
texlive
texlive-latex-recommended
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Lese Status-Informationen ein... Fertig
Lese erweiterte Statusinformationen
Initialisiere Paketstatus... Fertig
Schreibe erweiterte Statusinformationen... Fertig
Lese Task-Beschreibungen... Fertig
fmtutil: running `pdftex -ini -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' ...
This is pdfTeXk, Version 3.1415926-1.40.9 (Web2C 7.5.7) (INITEX)
%&-line parsing enabled.
(/usr/share/texmf-texlive/web2c/cp227.tcx)
entering extended mode
(/usr/share/texmf-texlive/tex/plain/config/etex.ini
(/usr/share/texmf-texlive/tex/plain/etex/etex.src
(/usr/share/texmf-texlive/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texmf-texlive/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-texlive/tex/generic/config/language.def
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex)
! I can't find file `dehypht-x-2008-06-18.tex'.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
(Press Enter to retry, or Control-D to exit)
Please type another input file name:
! Emergency stop.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
No pages of output.
Transcript written on etex.log.
Error: `pdftex -ini -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' failed
fmtutil: running `pdftex -ini -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeXk, Version 3.1415926-1.40.9 (Web2C 7.5.7) (INITEX)
%&-line parsing enabled.
(/usr/share/texmf-texlive/web2c/cp227.tcx)
entering extended mode
(/usr/share/texmf-texlive/tex/plain/config/pdfetex.ini
(/etc/texmf/tex/generic/config/pdftexconfig.tex)
(/usr/share/texmf-texlive/tex/plain/etex/etex.src
(/usr/share/texmf-texlive/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texmf-texlive/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-texlive/tex/generic/config/language.def
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex)
! I can't find file `dehypht-x-2008-06-18.tex'.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
(Press Enter to retry, or Control-D to exit)
Please type another input file name:
! Emergency stop.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
! ==> Fatal error occurred, no output PDF file produced!
Transcript written on pdfetex.log.
Error: `pdftex -ini -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' failed
fmtutil: running `pdftex -ini -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeXk, Version 3.1415926-1.40.9 (Web2C 7.5.7) (INITEX)
%&-line parsing enabled.
(/usr/share/texmf-texlive/web2c/cp227.tcx)
entering extended mode
(/usr/share/texmf-texlive/tex/plain/config/pdfetex.ini
(/etc/texmf/tex/generic/config/pdftexconfig.tex)
(/usr/share/texmf-texlive/tex/plain/etex/etex.src
(/usr/share/texmf-texlive/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texmf-texlive/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-texlive/tex/generic/config/language.def
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex)
! I can't find file `dehypht-x-2008-06-18.tex'.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
(Press Enter to retry, or Control-D to exit)
Please type another input file name:
! Emergency stop.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
! ==> Fatal error occurred, no output PDF file produced!
Transcript written on pdftex.log.
Error: `pdftex -ini -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' failed
fmtutil: running `tex -ini -jobname=tex -progname=tex tex.ini' ...
This is TeX, Version 3.1415926 (Web2C 7.5.7) (INITEX)
(/usr/share/texmf-texlive/tex/plain/config/tex.ini
(/usr/share/texmf-texlive/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex)) )
Beginning to dump on file tex.fmt
(format=tex 2009.5.4)
2022 strings of total length 29074
4990 memory locations dumped; current usage is 110&4877
926 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
No pages of output.
Transcript written on tex.log.
fmtutil: /var/lib/texmf/web2c/tex/tex.fmt installed.
fmtutil: running `mf-nowin -ini -jobname=mf -progname=mf -translate-file=cp227.tcx mf.ini' ...
This is METAFONT, Version 2.718281 (Web2C 7.5.7) (INIMF)
(/usr/share/texmf-texlive/web2c/cp227.tcx)
(/usr/share/texmf-texlive/metafont/config/mf.ini
(/usr/share/texmf-texlive/metafont/base/plain.mf
Preloading the plain base, version 2.71: preliminaries,
basic constants and mathematical macros,
macros for converting from device-independent units to pixels,
macros and tables for various modes of operation,
macros for drawing and filling,
macros for proof labels and rules,
macros for character and font administration,
and a few last-minute items.)
kpathsea: Running mktexmf modes
! I can't find file `modes'.
l.3 \input modes
Please type another input file name:
! Emergency stop.
l.3 \input modes
Transcript written on mf.log.
Error: `mf-nowin -ini -jobname=mf -progname=mf -translate-file=cp227.tcx mf.ini' failed
###############################################################################
fmtutil: Error! Not all formats have been built successfully.
Visit the log files in directory
/var/lib/texmf/web2c
for details.
###############################################################################
This is a summary of all `failed' messages and warnings:
`pdftex -ini -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' failed
`pdftex -ini -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' failed
`pdftex -ini -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' failed
`mf-nowin -ini -jobname=mf -progname=mf -translate-file=cp227.tcx mf.ini' failed
fmtutil: running `pdftex -ini -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' ...
This is pdfTeXk, Version 3.1415926-1.40.9 (Web2C 7.5.7) (INITEX)
%&-line parsing enabled.
(/usr/share/texmf-texlive/web2c/cp227.tcx)
entering extended mode
(/usr/share/texmf-texlive/tex/plain/config/etex.ini
(/usr/share/texmf-texlive/tex/plain/etex/etex.src
(/usr/share/texmf-texlive/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texmf-texlive/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-texlive/tex/generic/config/language.def
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex)
! I can't find file `dehypht-x-2008-06-18.tex'.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
(Press Enter to retry, or Control-D to exit)
Please type another input file name:
! Emergency stop.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
No pages of output.
Transcript written on etex.log.
Error: `pdftex -ini -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' failed
fmtutil: running `pdftex -ini -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeXk, Version 3.1415926-1.40.9 (Web2C 7.5.7) (INITEX)
%&-line parsing enabled.
(/usr/share/texmf-texlive/web2c/cp227.tcx)
entering extended mode
(/usr/share/texmf-texlive/tex/plain/config/pdfetex.ini
(/etc/texmf/tex/generic/config/pdftexconfig.tex)
(/usr/share/texmf-texlive/tex/plain/etex/etex.src
(/usr/share/texmf-texlive/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texmf-texlive/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-texlive/tex/generic/config/language.def
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex)
! I can't find file `dehypht-x-2008-06-18.tex'.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
(Press Enter to retry, or Control-D to exit)
Please type another input file name:
! Emergency stop.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
! ==> Fatal error occurred, no output PDF file produced!
Transcript written on pdfetex.log.
Error: `pdftex -ini -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' failed
fmtutil: running `pdftex -ini -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' ...
This is pdfTeXk, Version 3.1415926-1.40.9 (Web2C 7.5.7) (INITEX)
%&-line parsing enabled.
(/usr/share/texmf-texlive/web2c/cp227.tcx)
entering extended mode
(/usr/share/texmf-texlive/tex/plain/config/pdfetex.ini
(/etc/texmf/tex/generic/config/pdftexconfig.tex)
(/usr/share/texmf-texlive/tex/plain/etex/etex.src
(/usr/share/texmf-texlive/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex
[skipping from \patterns to end-of-file...]))
(/usr/share/texmf-texlive/tex/plain/etex/etexdefs.lib
Skipping module "grouptypes"; Loading module "interactionmodes";
Skipping module "nodetypes"; Skipping module "iftypes";)
(/usr/share/texmf-texlive/tex/generic/config/language.def
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex)
! I can't find file `dehypht-x-2008-06-18.tex'.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
(Press Enter to retry, or Control-D to exit)
Please type another input file name:
! Emergency stop.
\addlanguage ...me =#5 \uselanguage {#1}\input #2
\if *#3*\else \input #3 \f...
l.29 ...8-06-18}{dehypht-x-2008-06-18.tex}{}{2}{2}
! ==> Fatal error occurred, no output PDF file produced!
Transcript written on pdftex.log.
Error: `pdftex -ini -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' failed
fmtutil: running `tex -ini -jobname=tex -progname=tex tex.ini' ...
This is TeX, Version 3.1415926 (Web2C 7.5.7) (INITEX)
(/usr/share/texmf-texlive/tex/plain/config/tex.ini
(/usr/share/texmf-texlive/tex/plain/base/plain.tex
Preloading the plain format: codes, registers, parameters, fonts, more fonts,
macros, math definitions, output routines, hyphenation
(/usr/share/texmf-texlive/tex/generic/hyphen/hyphen.tex)) )
Beginning to dump on file tex.fmt
(format=tex 2009.5.4)
2022 strings of total length 29074
4990 memory locations dumped; current usage is 110&4877
926 multiletter control sequences
\font\nullfont=nullfont
\font\tenrm=cmr10
\font\preloaded=cmr9
\font\preloaded=cmr8
\font\sevenrm=cmr7
\font\preloaded=cmr6
\font\fiverm=cmr5
\font\teni=cmmi10
\font\preloaded=cmmi9
\font\preloaded=cmmi8
\font\seveni=cmmi7
\font\preloaded=cmmi6
\font\fivei=cmmi5
\font\tensy=cmsy10
\font\preloaded=cmsy9
\font\preloaded=cmsy8
\font\sevensy=cmsy7
\font\preloaded=cmsy6
\font\fivesy=cmsy5
\font\tenex=cmex10
\font\preloaded=cmss10
\font\preloaded=cmssq8
\font\preloaded=cmssi10
\font\preloaded=cmssqi8
\font\tenbf=cmbx10
\font\preloaded=cmbx9
\font\preloaded=cmbx8
\font\sevenbf=cmbx7
\font\preloaded=cmbx6
\font\fivebf=cmbx5
\font\tentt=cmtt10
\font\preloaded=cmtt9
\font\preloaded=cmtt8
\font\preloaded=cmsltt10
\font\tensl=cmsl10
\font\preloaded=cmsl9
\font\preloaded=cmsl8
\font\tenit=cmti10
\font\preloaded=cmti9
\font\preloaded=cmti8
\font\preloaded=cmti7
\font\preloaded=cmu10
\font\preloaded=cmmib10
\font\preloaded=cmbsy10
\font\preloaded=cmcsc10
\font\preloaded=cmssbx10
\font\preloaded=cmdunh10
\font\preloaded=cmr7 at 14.51799pt
\font\preloaded=cmtt10 at 14.4pt
\font\preloaded=cmssbx10 at 14.4pt
\font\preloaded=manfnt
14787 words of font info for 50 preloaded fonts
14 hyphenation exceptions
Hyphenation trie of length 6075 has 181 ops out of 35111
181 for language 0
No pages of output.
Transcript written on tex.log.
fmtutil: /var/lib/texmf/web2c/tex/tex.fmt installed.
fmtutil: running `mf-nowin -ini -jobname=mf -progname=mf -translate-file=cp227.tcx mf.ini' ...
This is METAFONT, Version 2.718281 (Web2C 7.5.7) (INIMF)
(/usr/share/texmf-texlive/web2c/cp227.tcx)
(/usr/share/texmf-texlive/metafont/config/mf.ini
(/usr/share/texmf-texlive/metafont/base/plain.mf
Preloading the plain base, version 2.71: preliminaries,
basic constants and mathematical macros,
macros for converting from device-independent units to pixels,
macros and tables for various modes of operation,
macros for drawing and filling,
macros for proof labels and rules,
macros for character and font administration,
and a few last-minute items.)
kpathsea: Running mktexmf modes
! I can't find file `modes'.
l.3 \input modes
Please type another input file name:
! Emergency stop.
l.3 \input modes
Transcript written on mf.log.
Error: `mf-nowin -ini -jobname=mf -progname=mf -translate-file=cp227.tcx mf.ini' failed
###############################################################################
fmtutil: Error! Not all formats have been built successfully.
Visit the log files in directory
/var/lib/texmf/web2c
for details.
###############################################################################
This is a summary of all `failed' messages and warnings:
`pdftex -ini -jobname=etex -progname=etex -translate-file=cp227.tcx *etex.ini' failed
`pdftex -ini -jobname=pdfetex -progname=pdfetex -translate-file=cp227.tcx *pdfetex.ini' failed
`pdftex -ini -jobname=pdftex -progname=pdftex -translate-file=cp227.tcx *pdfetex.ini' failed
`mf-nowin -ini -jobname=mf -progname=mf -translate-file=cp227.tcx mf.ini' failed
Reply to: