Bug#502755: luatex: piuparts test fails: fmtutil problem
Package: luatex
Version: 0.28.0-1
Severity: serious
User: debian-qa@lists.debian.org
Usertags: piuparts-20081019 piuparts
Hi,
During tests using piuparts of all packages in lenny,
I ran into the following problem:
> Reading package lists...
> Building dependency tree...
> Reading state information...
> The following packages were automatically installed and are no longer required:
> libgc1c2
> Use 'apt-get autoremove' to remove them.
> The following extra packages will be installed:
> defoma ed file fontconfig-config ifupdown libexpat1 libfontconfig1
> libfreetype6 libfribidi0 libgdbm3 libice6 libjpeg62 libkpathsea4 libmagic1
> libnewt0.52 libpng12-0 libpoppler3 libpopt0 libsm6 libx11-6 libx11-data
> libxau6 libxaw7 libxcb-xlib0 libxcb1 libxdmcp6 libxext6 libxft2 libxml2
> libxmu6 libxpm4 libxrender1 libxt6 mime-support net-tools netbase perl
> perl-doc perl-modules perl-tk sgml-base tex-common texlive-base-bin
> texlive-base-bin-doc texlive-common ttf-dejavu ttf-dejavu-core
> ttf-dejavu-extra ucf whiptail x11-common xml-core
> Suggested packages:
> defoma-doc dfontmgr psfontmgr x-ttcidfont-conf iproute dhcp3-client
> dhcp-client ppp libfreetype6-dev libterm-readline-gnu-perl
> libterm-readline-perl-perl man-browser groff sgml-base-doc debhelper
> ghostscript xpdf-reader pdf-viewer gv postscript-viewer
> Recommended packages:
> libft-perl
> The following NEW packages will be installed:
> defoma ed file fontconfig-config ifupdown libexpat1 libfontconfig1
> libfreetype6 libfribidi0 libgdbm3 libice6 libjpeg62 libkpathsea4 libmagic1
> libnewt0.52 libpng12-0 libpoppler3 libpopt0 libsm6 libx11-6 libx11-data
> libxau6 libxaw7 libxcb-xlib0 libxcb1 libxdmcp6 libxext6 libxft2 libxml2
> libxmu6 libxpm4 libxrender1 libxt6 luatex mime-support net-tools netbase
> perl perl-doc perl-modules perl-tk sgml-base tex-common texlive-base-bin
> texlive-base-bin-doc texlive-common ttf-dejavu ttf-dejavu-core
> ttf-dejavu-extra ucf whiptail x11-common xml-core
> 0 upgraded, 53 newly installed, 0 to remove and 0 not upgraded.
> Need to get 42.5MB of archives.
> After this operation, 105MB of additional disk space will be used.
> WARNING: The following packages cannot be authenticated!
> x11-common libice6 libsm6 libxau6 libxdmcp6 libxcb1 libxcb-xlib0 libx11-data
> libx11-6 libxt6 ed net-tools ifupdown libgdbm3 libnewt0.52 libpopt0 netbase
> whiptail libmagic1 file mime-support perl-modules perl defoma ucf
> ttf-dejavu-core ttf-dejavu-extra ttf-dejavu fontconfig-config libexpat1
> libfreetype6 libfontconfig1 libfribidi0 libjpeg62 libkpathsea4 libpng12-0
> libxml2 libpoppler3 libxext6 libxmu6 libxpm4 libxaw7 libxrender1 libxft2
> tex-common texlive-common texlive-base-bin luatex perl-doc perl-tk sgml-base
> texlive-base-bin-doc xml-core
> Authentication warning overridden.
> Get:1 http://127.0.0.1 lenny/main x11-common 1:7.3+17 [343kB]
> Get:2 http://127.0.0.1 lenny/main libice6 2:1.0.4-1 [46.6kB]
> Get:3 http://127.0.0.1 lenny/main libsm6 2:1.0.3-2 [22.3kB]
> Get:4 http://127.0.0.1 lenny/main libxau6 1:1.0.3-3 [11.9kB]
> Get:5 http://127.0.0.1 lenny/main libxdmcp6 1:1.0.2-3 [17.0kB]
> Get:6 http://127.0.0.1 lenny/main libxcb1 1.1-1.1 [43.1kB]
> Get:7 http://127.0.0.1 lenny/main libxcb-xlib0 1.1-1.1 [15.1kB]
> Get:8 http://127.0.0.1 lenny/main libx11-data 2:1.1.5-2 [169kB]
> Get:9 http://127.0.0.1 lenny/main libx11-6 2:1.1.5-2 [623kB]
> Get:10 http://127.0.0.1 lenny/main libxt6 1:1.0.5-3 [166kB]
> Get:11 http://127.0.0.1 lenny/main ed 0.7-2 [48.6kB]
> Get:12 http://127.0.0.1 lenny/main net-tools 1.60-20 [263kB]
> Get:13 http://127.0.0.1 lenny/main ifupdown 0.6.8+nmu1 [47.2kB]
> Get:14 http://127.0.0.1 lenny/main libgdbm3 1.8.3-3 [22.5kB]
> Get:15 http://127.0.0.1 lenny/main libnewt0.52 0.52.2-11.3 [68.1kB]
> Get:16 http://127.0.0.1 lenny/main libpopt0 1.14-4 [45.9kB]
> Get:17 http://127.0.0.1 lenny/main netbase 4.34 [18.5kB]
> Get:18 http://127.0.0.1 lenny/main whiptail 0.52.2-11.3 [35.1kB]
> Get:19 http://127.0.0.1 lenny/main libmagic1 4.26-1 [369kB]
> Get:20 http://127.0.0.1 lenny/main file 4.26-1 [44.1kB]
> Get:21 http://127.0.0.1 lenny/main mime-support 3.44-1 [33.3kB]
> Get:22 http://127.0.0.1 lenny/main perl-modules 5.10.0-15 [3191kB]
> Get:23 http://127.0.0.1 lenny/main perl 5.10.0-15 [4547kB]
> Get:24 http://127.0.0.1 lenny/main defoma 0.11.10-0.2 [101kB]
> Get:25 http://127.0.0.1 lenny/main ucf 3.0010 [61.3kB]
> Get:26 http://127.0.0.1 lenny/main ttf-dejavu-core 2.25-3 [1360kB]
> Get:27 http://127.0.0.1 lenny/main ttf-dejavu-extra 2.25-3 [2982kB]
> Get:28 http://127.0.0.1 lenny/main ttf-dejavu 2.25-3 [25.8kB]
> Get:29 http://127.0.0.1 lenny/main fontconfig-config 2.6.0-1 [183kB]
> Get:30 http://127.0.0.1 lenny/main libexpat1 2.0.1-4 [132kB]
> Get:31 http://127.0.0.1 lenny/main libfreetype6 2.3.7-2 [368kB]
> Get:32 http://127.0.0.1 lenny/main libfontconfig1 2.6.0-1 [230kB]
> Get:33 http://127.0.0.1 lenny/main libfribidi0 0.10.9-1 [42.6kB]
> Get:34 http://127.0.0.1 lenny/main libjpeg62 6b-14 [86.0kB]
> Get:35 http://127.0.0.1 lenny/main libkpathsea4 2007.dfsg.2-3 [121kB]
> Get:36 http://127.0.0.1 lenny/main libpng12-0 1.2.27-2 [166kB]
> Get:37 http://127.0.0.1 lenny/main libxml2 2.6.32.dfsg-4 [814kB]
> Get:38 http://127.0.0.1 lenny/main libpoppler3 0.8.7-1 [814kB]
> Get:39 http://127.0.0.1 lenny/main libxext6 2:1.0.4-1 [33.5kB]
> Get:40 http://127.0.0.1 lenny/main libxmu6 2:1.0.4-1 [51.1kB]
> Get:41 http://127.0.0.1 lenny/main libxpm4 1:3.5.7-1 [40.3kB]
> Get:42 http://127.0.0.1 lenny/main libxaw7 2:1.0.4-2 [187kB]
> Get:43 http://127.0.0.1 lenny/main libxrender1 1:0.9.4-2 [26.6kB]
> Get:44 http://127.0.0.1 lenny/main libxft2 2.1.12-3 [49.0kB]
> Get:45 http://127.0.0.1 lenny/main tex-common 1.11.2 [715kB]
> Get:46 http://127.0.0.1 lenny/main texlive-common 2007.dfsg.1-4 [89.9kB]
> Get:47 http://127.0.0.1 lenny/main texlive-base-bin 2007.dfsg.2-3 [2365kB]
> Get:48 http://127.0.0.1 lenny/main luatex 0.28.0-1 [1939kB]
> Get:49 http://127.0.0.1 lenny/main perl-doc 5.10.0-15 [8221kB]
> Get:50 http://127.0.0.1 lenny/main perl-tk 1:804.028-1+b1 [2439kB]
> Get:51 http://127.0.0.1 lenny/main sgml-base 1.26 [11.7kB]
> Get:52 http://127.0.0.1 lenny/main texlive-base-bin-doc 2007.dfsg.2-3 [8608kB]
> Get:53 http://127.0.0.1 lenny/main xml-core 0.11 [22.4kB]
> debconf: delaying package configuration, since apt-utils is not installed
> Fetched 42.5MB in 14s (2843kB/s)
> Can not write log, openpty() failed (/dev/pts not mounted?)
> Selecting previously deselected package x11-common.
> (Reading database ... 5779 files and directories currently installed.)
> Unpacking x11-common (from .../x11-common_1%3a7.3+17_all.deb) ...
> Selecting previously deselected package libice6.
> Unpacking libice6 (from .../libice6_2%3a1.0.4-1_i386.deb) ...
> Selecting previously deselected package libsm6.
> Unpacking libsm6 (from .../libsm6_2%3a1.0.3-2_i386.deb) ...
> Selecting previously deselected package libxau6.
> Unpacking libxau6 (from .../libxau6_1%3a1.0.3-3_i386.deb) ...
> Selecting previously deselected package libxdmcp6.
> Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.2-3_i386.deb) ...
> Selecting previously deselected package libxcb1.
> Unpacking libxcb1 (from .../libxcb1_1.1-1.1_i386.deb) ...
> Selecting previously deselected package libxcb-xlib0.
> Unpacking libxcb-xlib0 (from .../libxcb-xlib0_1.1-1.1_i386.deb) ...
> Selecting previously deselected package libx11-data.
> Unpacking libx11-data (from .../libx11-data_2%3a1.1.5-2_all.deb) ...
> Selecting previously deselected package libx11-6.
> Unpacking libx11-6 (from .../libx11-6_2%3a1.1.5-2_i386.deb) ...
> Can not write log, openpty() failed (/dev/pts not mounted?)
> Setting up x11-common (1:7.3+17) ...
> Can not write log, openpty() failed (/dev/pts not mounted?)
> Selecting previously deselected package libxt6.
> (Reading database ... 6096 files and directories currently installed.)
> Unpacking libxt6 (from .../libxt6_1%3a1.0.5-3_i386.deb) ...
> Selecting previously deselected package ed.
> Unpacking ed (from .../apt/archives/ed_0.7-2_i386.deb) ...
> Selecting previously deselected package net-tools.
> Unpacking net-tools (from .../net-tools_1.60-20_i386.deb) ...
> Selecting previously deselected package ifupdown.
> Unpacking ifupdown (from .../ifupdown_0.6.8+nmu1_i386.deb) ...
> Selecting previously deselected package libgdbm3.
> Unpacking libgdbm3 (from .../libgdbm3_1.8.3-3_i386.deb) ...
> Selecting previously deselected package libnewt0.52.
> Unpacking libnewt0.52 (from .../libnewt0.52_0.52.2-11.3_i386.deb) ...
> Selecting previously deselected package libpopt0.
> Unpacking libpopt0 (from .../libpopt0_1.14-4_i386.deb) ...
> Selecting previously deselected package netbase.
> Unpacking netbase (from .../archives/netbase_4.34_all.deb) ...
> Selecting previously deselected package whiptail.
> Unpacking whiptail (from .../whiptail_0.52.2-11.3_i386.deb) ...
> Selecting previously deselected package libmagic1.
> Unpacking libmagic1 (from .../libmagic1_4.26-1_i386.deb) ...
> Selecting previously deselected package file.
> Unpacking file (from .../archives/file_4.26-1_i386.deb) ...
> Selecting previously deselected package mime-support.
> Unpacking mime-support (from .../mime-support_3.44-1_all.deb) ...
> Selecting previously deselected package perl-modules.
> Unpacking perl-modules (from .../perl-modules_5.10.0-15_all.deb) ...
> Selecting previously deselected package perl.
> Unpacking perl (from .../perl_5.10.0-15_i386.deb) ...
> Selecting previously deselected package defoma.
> Unpacking defoma (from .../defoma_0.11.10-0.2_all.deb) ...
> Selecting previously deselected package ucf.
> Unpacking ucf (from .../archives/ucf_3.0010_all.deb) ...
> Moving old data out of the way
> Selecting previously deselected package ttf-dejavu-core.
> Unpacking ttf-dejavu-core (from .../ttf-dejavu-core_2.25-3_all.deb) ...
> Selecting previously deselected package ttf-dejavu-extra.
> Unpacking ttf-dejavu-extra (from .../ttf-dejavu-extra_2.25-3_all.deb) ...
> Selecting previously deselected package ttf-dejavu.
> Unpacking ttf-dejavu (from .../ttf-dejavu_2.25-3_all.deb) ...
> Selecting previously deselected package fontconfig-config.
> Unpacking fontconfig-config (from .../fontconfig-config_2.6.0-1_all.deb) ...
> Selecting previously deselected package libexpat1.
> Unpacking libexpat1 (from .../libexpat1_2.0.1-4_i386.deb) ...
> Selecting previously deselected package libfreetype6.
> Unpacking libfreetype6 (from .../libfreetype6_2.3.7-2_i386.deb) ...
> Selecting previously deselected package libfontconfig1.
> Unpacking libfontconfig1 (from .../libfontconfig1_2.6.0-1_i386.deb) ...
> Selecting previously deselected package libfribidi0.
> Unpacking libfribidi0 (from .../libfribidi0_0.10.9-1_i386.deb) ...
> Selecting previously deselected package libjpeg62.
> Unpacking libjpeg62 (from .../libjpeg62_6b-14_i386.deb) ...
> Selecting previously deselected package libkpathsea4.
> Unpacking libkpathsea4 (from .../libkpathsea4_2007.dfsg.2-3_i386.deb) ...
> Selecting previously deselected package libpng12-0.
> Unpacking libpng12-0 (from .../libpng12-0_1.2.27-2_i386.deb) ...
> Selecting previously deselected package libxml2.
> Unpacking libxml2 (from .../libxml2_2.6.32.dfsg-4_i386.deb) ...
> Selecting previously deselected package libpoppler3.
> Unpacking libpoppler3 (from .../libpoppler3_0.8.7-1_i386.deb) ...
> Selecting previously deselected package libxext6.
> Unpacking libxext6 (from .../libxext6_2%3a1.0.4-1_i386.deb) ...
> Selecting previously deselected package libxmu6.
> Unpacking libxmu6 (from .../libxmu6_2%3a1.0.4-1_i386.deb) ...
> Selecting previously deselected package libxpm4.
> Unpacking libxpm4 (from .../libxpm4_1%3a3.5.7-1_i386.deb) ...
> Selecting previously deselected package libxaw7.
> Unpacking libxaw7 (from .../libxaw7_2%3a1.0.4-2_i386.deb) ...
> Selecting previously deselected package libxrender1.
> Unpacking libxrender1 (from .../libxrender1_1%3a0.9.4-2_i386.deb) ...
> Selecting previously deselected package libxft2.
> Unpacking libxft2 (from .../libxft2_2.1.12-3_i386.deb) ...
> Selecting previously deselected package tex-common.
> Unpacking tex-common (from .../tex-common_1.11.2_all.deb) ...
> Selecting previously deselected package texlive-common.
> Unpacking texlive-common (from .../texlive-common_2007.dfsg.1-4_all.deb) ...
> Selecting previously deselected package texlive-base-bin.
> Unpacking texlive-base-bin (from .../texlive-base-bin_2007.dfsg.2-3_i386.deb) ...
> Selecting previously deselected package luatex.
> Unpacking luatex (from .../luatex_0.28.0-1_i386.deb) ...
> Adding `diversion of /usr/bin/texdoc to /usr/bin/texdoc.notluatex by luatex'
> Adding `diversion of /usr/share/man/man1/texdoc.1.gz to /usr/share/man/man1/texdoc.notluatex.1.gz by luatex'
> Selecting previously deselected package perl-doc.
> Unpacking perl-doc (from .../perl-doc_5.10.0-15_all.deb) ...
> Adding `diversion of /usr/bin/perldoc to /usr/bin/perldoc.stub by perl-doc'
> Selecting previously deselected package perl-tk.
> Unpacking perl-tk (from .../perl-tk_1%3a804.028-1+b1_i386.deb) ...
> Selecting previously deselected package sgml-base.
> Unpacking sgml-base (from .../sgml-base_1.26_all.deb) ...
> Selecting previously deselected package texlive-base-bin-doc.
> Unpacking texlive-base-bin-doc (from .../texlive-base-bin-doc_2007.dfsg.2-3_i386.deb) ...
> Selecting previously deselected package xml-core.
> Unpacking xml-core (from .../archives/xml-core_0.11_all.deb) ...
> Can not write log, openpty() failed (/dev/pts not mounted?)
> Setting up libice6 (2:1.0.4-1) ...
> Setting up libsm6 (2:1.0.3-2) ...
> Setting up libxau6 (1:1.0.3-3) ...
> Setting up libxdmcp6 (1:1.0.2-3) ...
> Setting up libxcb1 (1.1-1.1) ...
> Setting up libxcb-xlib0 (1.1-1.1) ...
> Setting up libx11-data (2:1.1.5-2) ...
> Setting up libx11-6 (2:1.1.5-2) ...
> Setting up libxt6 (1:1.0.5-3) ...
> Setting up ed (0.7-2) ...
> Setting up net-tools (1.60-20) ...
> Setting up ifupdown (0.6.8+nmu1) ...
> ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces
> ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces
> Setting up libgdbm3 (1.8.3-3) ...
> Setting up libnewt0.52 (0.52.2-11.3) ...
> Setting up libpopt0 (1.14-4) ...
> Setting up netbase (4.34) ...
> Setting up whiptail (0.52.2-11.3) ...
> Setting up libmagic1 (4.26-1) ...
> Setting up file (4.26-1) ...
> Setting up mime-support (3.44-1) ...
> Setting up ucf (3.0010) ...
> Setting up libexpat1 (2.0.1-4) ...
> Setting up libfreetype6 (2.3.7-2) ...
> Setting up libfribidi0 (0.10.9-1) ...
> Setting up libjpeg62 (6b-14) ...
> Setting up libkpathsea4 (2007.dfsg.2-3) ...
> Setting up libpng12-0 (1.2.27-2) ...
> Setting up libxml2 (2.6.32.dfsg-4) ...
> Setting up libxext6 (2:1.0.4-1) ...
> Setting up libxmu6 (2:1.0.4-1) ...
> Setting up libxpm4 (1:3.5.7-1) ...
> Setting up libxaw7 (2:1.0.4-2) ...
> Setting up libxrender1 (1:0.9.4-2) ...
> Setting up tex-common (1.11.2) ...
>
> Creating config file /etc/texmf/texmf.d/05TeXMF.cnf with new version
>
> Creating config file /etc/texmf/texmf.d/15Plain.cnf with new version
>
> Creating config file /etc/texmf/texmf.d/45TeXinputs.cnf with new version
>
> Creating config file /etc/texmf/texmf.d/55Fonts.cnf with new version
>
> Creating config file /etc/texmf/texmf.d/65BibTeX.cnf with new version
>
> Creating config file /etc/texmf/texmf.d/75DviPS.cnf with new version
>
> Creating config file /etc/texmf/texmf.d/85Misc.cnf with new version
>
> Creating config file /etc/texmf/texmf.d/90TeXDoc.cnf with new version
>
> Creating config file /etc/texmf/texmf.d/95NonPath.cnf with new version
>
> Creating config file /etc/texmf/updmap.d/00updmap.cfg with new version
>
> Creating config file /etc/texmf/texmf.cnf with new version
> Setting up texlive-common (2007.dfsg.1-4) ...
> Setting up texlive-base-bin-doc (2007.dfsg.2-3) ...
> Running mktexlsr. This may take some time... done.
> Setting up perl-modules (5.10.0-15) ...
> Setting up perl (5.10.0-15) ...
> Setting up defoma (0.11.10-0.2) ...
> Setting up ttf-dejavu-core (2.25-3) ...
> Setting up ttf-dejavu-extra (2.25-3) ...
> Setting up ttf-dejavu (2.25-3) ...
> Setting up fontconfig-config (2.6.0-1) ...
> Setting up libfontconfig1 (2.6.0-1) ...
> Setting up libpoppler3 (0.8.7-1) ...
> Setting up libxft2 (2.1.12-3) ...
> Setting up texlive-base-bin (2007.dfsg.2-3) ...
> Running mktexlsr. This may take some time... done.
> Building format(s) --all.
> This may take some time... done.
> Setting up luatex (0.28.0-1) ...
> Running mktexlsr. This may take some time... done.
> Building format(s) --all --cnffile /etc/texmf/fmt.d/20luatex.cnf.
> This may take some time...
> fmtutil-sys failed. Output has been stored in
> /tmp/fmtutil.aQsKtfKU
> Please include this file if you report a bug.
>
> dpkg: error processing luatex (--configure):
> subprocess post-installation script returned error exit status 1
> Setting up perl-doc (5.10.0-15) ...
> Setting up perl-tk (1:804.028-1+b1) ...
> Setting up sgml-base (1.26) ...
> Setting up xml-core (0.11) ...
> Errors were encountered while processing:
> luatex
> E: Sub-process /usr/bin/dpkg returned an error code (1)
It is reproducible by installing your package in a clean chroot - cleaned
up using:
debfoster -o MaxPriority=required -o UseRecommends=no -f -n apt debfoster
Content of /tmp/fmtutil.*:
fmtutil: running `luatex -ini -jobname=luatex -progname=luatex luatex.ini' ...
This is LuaTeX, Version snapshot-0.28.0-2008070709 (Web2C 7.5.6) (INITEX)
(/usr/share/texmf/tex/plain/config/luatex.ini
! I can't find file `etex.ini'.
l.3 \input etex.ini
Please type another input file name:
! Emergency stop.
l.3 \input etex.ini
No pages of output.
Transcript written on luatex.log.
Error: `luatex -ini -jobname=luatex -progname=luatex luatex.ini' failed
fmtutil: running `luatex -ini -jobname=pdfluatex -progname=pdfluatex pdfluatex.ini' ...
This is LuaTeX, Version snapshot-0.28.0-2008070709 (Web2C 7.5.6) (INITEX)
(/usr/share/texmf/tex/plain/config/pdfluatex.ini
(/etc/texmf/tex/generic/config/pdftexconfig.tex)
! I can't find file `plain.tex'.
l.3 \input plain
Please type another input file name:
! Emergency stop.
l.3 \input plain
! ==> Fatal error occurred, no output PDF file produced!
Transcript written on pdfluatex.log.
Error: `luatex -ini -jobname=pdfluatex -progname=pdfluatex pdfluatex.ini' failed
###############################################################################
fmtutil: Error! Not all formats have been built successfully.
Visit the log files in directory
/var/lib/texmf/web2c
for details.
###############################################################################
This is a summary of all `failed' messages and warnings:
`luatex -ini -jobname=luatex -progname=luatex luatex.ini' failed
`luatex -ini -jobname=pdfluatex -progname=pdfluatex pdfluatex.ini' failed
paraquad-59:~# cat /tmp/fmtutil.dIKOKgPF
fmtutil: running `luatex -ini -jobname=luatex -progname=luatex luatex.ini' ...
This is LuaTeX, Version snapshot-0.28.0-2008070709 (Web2C 7.5.6) (INITEX)
(/usr/share/texmf/tex/plain/config/luatex.ini
! I can't find file `etex.ini'.
l.3 \input etex.ini
Please type another input file name:
! Emergency stop.
l.3 \input etex.ini
No pages of output.
Transcript written on luatex.log.
Error: `luatex -ini -jobname=luatex -progname=luatex luatex.ini' failed
fmtutil: running `luatex -ini -jobname=pdfluatex -progname=pdfluatex pdfluatex.ini' ...
This is LuaTeX, Version snapshot-0.28.0-2008070709 (Web2C 7.5.6) (INITEX)
(/usr/share/texmf/tex/plain/config/pdfluatex.ini
(/etc/texmf/tex/generic/config/pdftexconfig.tex)
! I can't find file `plain.tex'.
l.3 \input plain
Please type another input file name:
! Emergency stop.
l.3 \input plain
! ==> Fatal error occurred, no output PDF file produced!
Transcript written on pdfluatex.log.
Error: `luatex -ini -jobname=pdfluatex -progname=pdfluatex pdfluatex.ini' failed
###############################################################################
fmtutil: Error! Not all formats have been built successfully.
Visit the log files in directory
/var/lib/texmf/web2c
for details.
###############################################################################
This is a summary of all `failed' messages and warnings:
`luatex -ini -jobname=luatex -progname=luatex luatex.ini' failed
`luatex -ini -jobname=pdfluatex -progname=pdfluatex pdfluatex.ini' failed
--
| Lucas Nussbaum
| lucas@lucas-nussbaum.net http://www.lucas-nussbaum.net/ |
| jabber: lucas@nussbaum.fr GPG: 1024D/023B3F4F |
Reply to: