usb mouse not working after upgrade to sarge
hi,
I cannot get the usb mouse to work on my laptop after
upgrade to sarge with kernel 2.6.7 (i did work fine
in woody with 2.4.25)
i think i have all the necessary modules loaded: here is
the output of lsmod | grep usb:
usb_storage 68064 0
usbkbd 7424 0
usbmouse 5664 0
usbhid 32768 0
usbcore 114784 7 uhci_hcd,usb_storage,usbkbd,usbmouse,usbhid
ide_core 142808 4 usb_storage,ide_disk,ide_generic,via82cxxx
scsi_mod 125004 3 usb_storage,sd_mod,libata
and here of dmesg | grep usb
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new driver usb-storage
usb 1-2: new low speed USB device using address 2
input: USB HID v1.10 Mouse [062a:0001] on usb-0000:00:07.0-2
usb 1-2: USB disconnect, address 2
usb 1-2: new low speed USB device using address 3
input: USB HID v1.10 Mouse [062a:0001] on usb-0000:00:07.0-2
usb usb5: USB disconnect, address 1
usb 1-2: USB disconnect, address 3
usb usb1: USB disconnect, address 1
usb usb2: USB disconnect, address 1
usb usb3: USB disconnect, address 1
usb usb4: USB disconnect, address 1
usb 1-2: new low speed USB device using address 2
input: USB HID v1.10 Mouse [062a:0001] on usb-0000:00:07.0-2
the mouse if obviously detected, but nothing happens
if i move the mouse or on clicking, b.t.w. it is an optical
one and the light is on!
here the relevant section of XFConfig-4:
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
# Option "Device" "/dev/usbmouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
(as you can see i tried already changing to /dev/usbmouse)
thanks for the help!
Reply to: