Re: [FIX]: ultra45 boot failing... => Netra T1 200 too?
On Fri, 2009-02-06 at 23:11 -0800, David Miller wrote:
> The patch:
>
> debian/patches/bugfix/sparc/arch_pci_hostcontroller_workaround.patch
>
> causes ultra45 (and other PCI-Express based workstations) to
> hard reset when the PCI bus is initially scanned by the kernel.
>
> Please revert this patch from the debian kernel in Lenny and
> anywhere else it appears.
>
> The code in that patch creating dummy PCI root host controller nodes
> is wrong and does nothing other than cause trouble. If it fixes some
> problem with the X server for PCI devices on sparc64 that problem
> needs to be fixed some other way.
On my Netra T1 200 the lenny (net) boot installer stopped just after
detecting network hardware. I then tried the etch one which worked
fine for network, mirror and stuff and at least up to disk selection,
the machine has no disk yet (BTW is full NFS install possible?).
May be it's the same problem? Anyone with a successful install
of etch or lenny on a Netra T1 200?
~ # lspci -nn
00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIe [108e:a001]
00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13)
00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13)
01:03.0 Non-VGA unclassified device [0000]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
01:05.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO GEM [108e:1101] (rev 01)
01:05.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB [108e:1103] (rev 01)
01:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
01:0c.0 Bridge [0680]: Sun Microsystems Computer Corp. RIO EBUS [108e:1100] (rev 01)
01:0c.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO GEM [108e:1101] (rev 01)
01:0c.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB [108e:1103] (rev 01)
01:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3)
02:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53C896/897 [1000:000b] (rev 07)
02:08.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53C896/897 [1000:000b] (rev 07)
Thanks in advance,
Laurent
Reply to: