Re: Debian in Ultra 5
Hi all,
I tried the Mach64 and it gives me the following error atached in this
mail.
Thanks for any info, Paulo Henrique
Quoting Steffan Baron (sbaron@wiwi.hu-berlin.de):
> >
> > I cant get X to work. I installed Debian in 2 Sparc 4, 1 Sparc 5 and
> >1 Sparc 20 before. All other machines I got X working.
>
> Had the same problems here .....
>
> I guess it is up to the PCI-based hardware, Xsun24 is just the wrong
> server ..... Solaris uses the M640 device, I guess it's a Mach64 based
> chip but perhaps I am wrong (I am relatively new to Sparc Linux). If
> I start the server directly I get a SEGV .....
>
> regards,
> Steffan
>
XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.9 sparc64 [ELF]
Configured drivers:
Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0)
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "sun"
(**) XKB: compat: "compat/complete"
(**) XKB: types: "types/complete"
(**) XKB: keycodes: "sun(type5)"
(**) XKB: geometry: "sun(type5unix)"
(**) XKB: symbols: "sun/us(sun5)"
(**) Mouse: type: sun, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) Mach64: Graphics device ID: "My Video Card"
(**) Mach64: Monitor ID: "Sony Multiscan 17seII"
(--) Mach64: Mode "1280x1024x76" needs hsync freq of 81.13 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) Mach64: PCI: Mach64 GT rev 154, Aperture @ 0xe1000000, Registers @ 0xe0008000, Block I/O @ 0xc00100
(--) Mach64: Card type: PCI
(--) Mach64: Memory type: SGRAM (5)
(--) Mach64: Clock type: Internal
(--) Mach64: Maximum allowed dot-clock: 200.000 MHz
(**) Mach64: Mode "1152x900x76": mode clock = 108.000
(**) Mach64: Virtual resolution: 1152x900
(--) Mach64: Video RAM: 2048k
(--) Mach64: Using hardware cursor
(--) Mach64: Using 16 MB aperture @ 0xe1000000
(--) Mach64: Using 4 KB register aperture @ 0xe0008000
(--) Mach64: Ramdac is Internal
(--) Mach64: Ramdac speed: 200 MHz
(**) Mach64: Color weight: 565
Fatal server error:
xf86MapVidMem: Could not mmap framebuffer (Invalid argument)
xinit: unexpected signal 2
Reply to: