[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: IO error question?



Hi, Tom.

>From the messages it appears that the DASD volume at virtual address 250
is not zLinux formatted. what were you planning on using it for?

DJ

On 11/06/2012 08:40 AM, Tom Huegel wrote:
> I just installed DEBIAN s390x and the following error pops up on the
> console every few minutes.
> I'm not much of a LINUX person (z/VM) so I need a little help deciphering
> the message.
> My guess is that something didn't get formatted or initialized correctly.
> 
> Thanks
> Tom
> 
> [  634.467707] dasd-eckd 0.0.0250: The specified record was not
> found
> [  634.467726] dasd(eckd): I/O status report for device
> 0.0.0250:
> [  634.467727] <3>dasd(eckd): in req: 000000001e409c20 CC:00 FC:04 AC:00
> SC:17 DS:0E CS:00 fcxs:01 schxs:00 RC:0
> [  634.467729] <3>dasd(eckd): device 0.0.0250: Failing TCW:
> 000000001e409d40
> [  634.467730] <3>dasd(eckd): tsb->length
> 64
> 
> [  634.467731] <3>dasd(eckd): tsb->flags
> 11
> 
> [  634.467731] <3>dasd(eckd): tsb->dcw_offset
> 0
> 
> [  634.467732] <3>dasd(eckd): tsb->count
> 57344
> 
> [  634.467733] <3>dasd(eckd): residual
> 57316
> 
> [  634.467734] <3>dasd(eckd): tsb->tsa.iostat.dev_time
> 661
> 
> [  634.467735] <3>dasd(eckd): tsb->tsa.iostat.def_time
> 0
> 
> [  634.467735] <3>dasd(eckd): tsb->tsa.iostat.queue_time
> 18
> [  634.467736] <3>dasd(eckd): tsb->tsa.iostat.dev_busy_time
> 0
> [  634.467737] <3>dasd(eckd): tsb->tsa.iostat.dev_act_time
> 0
> [  634.467738] <3>dasd(eckd): Sense(hex)  0- 7: 00 09 04 02 e0 92 12
> 00
> [  634.467739] <3>dasd(eckd): Sense(hex)  8-15: a6 01 92 02 0c 00 00
> 00
> [  634.467740] <3>dasd(eckd): Sense(hex) 16-23: 67 09 89 c5 06 30 0f
> 00
> [  634.467741] <3>dasd(eckd): Sense(hex) 24-31: 00 00 40 e3 00 01 92
> 02
> [  634.467742] <3>dasd(eckd): 24 Byte: 0 MSG 0, no MSGb to
> SYSOP
> [  634.467822] end_request: I/O error, dev dasda, sector
> 652512
> 

-- 
Dave Jones
V/Soft Software
www.vsoft-software.com
Houston, TX
281.578.7544


Reply to: