Re: Система зависает во время обращений к диску
30.09.2012 17:36, Dmitry A. Zhiglov пишет:
> 30 сентября 2012 г., 17:20 пользователь "Артём Н." <artiom14@yandex.ru> написал:
>> Когда что-то интенсивно работает с диском, система зависает и перестаёт
>> реагировать даже на пользовательский ввод: даже курсор не двигается.
>> Вот как сейчас: мне приходится ждать по 10 секунд, когда появится символ.
>> Огонёк H.D.D. горит синим цветом.
>
> Может быть "диск уже завернулся в простынку и ползет на кладбище"?
> smartmontools
Диск - новый терабайтник, но на нём много слоёв (LVM, LUKS, LVM, ext4, а для
винды на VMWare ещё файл с ФС и NTFS):
root@dana:~# smartctl -x /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.21] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST31000526SV
Serial Number: 9VPE08GT
LU WWN Device Id: 5 000c50 03ed71adb
Firmware Version: CV15
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Sep 30 17:49:37 2012 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 174) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bb) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 115 099 006 - 95118121
3 Spin_Up_Time PO---- 100 100 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 350
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 075 060 030 - 29703432
9 Power_On_Hours -O--CK 098 098 000 - 2072
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 349
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 092 000 - 66112
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 068 063 045 - 32 (Min/Max 23/32)
194 Temperature_Celsius -O---K 032 040 000 - 32 (0 19 0 0)
195 Hardware_ECC_Recovered -O-RC- 052 040 000 - 95118121
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
GP/S Log at address 0x01 has 1 sectors [Summary SMART error log]
GP/S Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log]
GP/S Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
GP/S Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP Log at address 0x21 has 1 sectors [Write stream error log]
GP Log at address 0x22 has 1 sectors [Read stream error log]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xa1 has 20 sectors [Device vendor specific log]
GP Log at address 0xa2 has 2248 sectors [Device vendor specific log]
GP/S Log at address 0xa8 has 129 sectors [Device vendor specific log]
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
GP Log at address 0xb0 has 2928 sectors [Device vendor specific log]
GP Log at address 0xbd has 252 sectors [Device vendor specific log]
GP Log at address 0xbe has 65535 sectors [Device vendor specific log]
GP Log at address 0xbf has 65535 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 23/32 Celsius
Lifetime Min/Max Temperature: 19/37 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 94 minutes
Min/Max recommended Temperature: 1/61 Celsius
Min/Max Temperature Limit: 2/60 Celsius
Temperature History Size (Index): 128 (2)
Index Estimated Time Temperature Celsius
3 2012-09-22 09:46 29 **********
4 2012-09-22 11:20 ? -
5 2012-09-22 12:54 21 **
6 2012-09-22 14:28 ? -
7 2012-09-22 16:02 22 ***
8 2012-09-22 17:36 22 ***
9 2012-09-22 19:10 ? -
10 2012-09-22 20:44 22 ***
11 2012-09-22 22:18 ? -
12 2012-09-22 23:52 22 ***
13 2012-09-23 01:26 22 ***
14 2012-09-23 03:00 29 **********
15 2012-09-23 04:34 30 ***********
16 2012-09-23 06:08 ? -
17 2012-09-23 07:42 22 ***
18 2012-09-23 09:16 23 ****
19 2012-09-23 10:50 30 ***********
20 2012-09-23 12:24 30 ***********
21 2012-09-23 13:58 ? -
22 2012-09-23 15:32 23 ****
23 2012-09-23 17:06 23 ****
24 2012-09-23 18:40 30 ***********
... ..( 6 skipped). .. ***********
31 2012-09-24 05:38 30 ***********
32 2012-09-24 07:12 31 ************
33 2012-09-24 08:46 31 ************
34 2012-09-24 10:20 ? -
35 2012-09-24 11:54 23 ****
36 2012-09-24 13:28 23 ****
37 2012-09-24 15:02 30 ***********
... ..( 3 skipped). .. ***********
41 2012-09-24 21:18 30 ***********
42 2012-09-24 22:52 31 ************
43 2012-09-25 00:26 31 ************
44 2012-09-25 02:00 ? -
45 2012-09-25 03:34 21 **
46 2012-09-25 05:08 21 **
47 2012-09-25 06:42 ? -
48 2012-09-25 08:16 22 ***
49 2012-09-25 09:50 22 ***
50 2012-09-25 11:24 30 ***********
51 2012-09-25 12:58 ? -
52 2012-09-25 14:32 22 ***
53 2012-09-25 16:06 ? -
54 2012-09-25 17:40 22 ***
55 2012-09-25 19:14 22 ***
56 2012-09-25 20:48 29 **********
57 2012-09-25 22:22 ? -
58 2012-09-25 23:56 22 ***
59 2012-09-26 01:30 22 ***
60 2012-09-26 03:04 30 ***********
61 2012-09-26 04:38 30 ***********
62 2012-09-26 06:12 ? -
63 2012-09-26 07:46 22 ***
64 2012-09-26 09:20 22 ***
65 2012-09-26 10:54 29 **********
66 2012-09-26 12:28 31 ************
67 2012-09-26 14:02 30 ***********
... ..( 4 skipped). .. ***********
72 2012-09-26 21:52 30 ***********
73 2012-09-26 23:26 ? -
74 2012-09-27 01:00 22 ***
75 2012-09-27 02:34 22 ***
76 2012-09-27 04:08 30 ***********
77 2012-09-27 05:42 30 ***********
78 2012-09-27 07:16 31 ************
79 2012-09-27 08:50 32 *************
80 2012-09-27 10:24 31 ************
81 2012-09-27 11:58 30 ***********
82 2012-09-27 13:32 31 ************
83 2012-09-27 15:06 ? -
84 2012-09-27 16:40 20 *
85 2012-09-27 18:14 ? -
86 2012-09-27 19:48 26 *******
87 2012-09-27 21:22 26 *******
88 2012-09-27 22:56 30 ***********
89 2012-09-28 00:30 ? -
90 2012-09-28 02:04 21 **
91 2012-09-28 03:38 21 **
92 2012-09-28 05:12 29 **********
93 2012-09-28 06:46 ? -
94 2012-09-28 08:20 21 **
95 2012-09-28 09:54 ? -
96 2012-09-28 11:28 25 ******
97 2012-09-28 13:02 25 ******
98 2012-09-28 14:36 ? -
99 2012-09-28 16:10 21 **
100 2012-09-28 17:44 ? -
101 2012-09-28 19:18 21 **
102 2012-09-28 20:52 21 **
103 2012-09-28 22:26 29 **********
104 2012-09-29 00:00 29 **********
105 2012-09-29 01:34 ? -
106 2012-09-29 03:08 20 *
107 2012-09-29 04:42 20 *
108 2012-09-29 06:16 29 **********
109 2012-09-29 07:50 29 **********
110 2012-09-29 09:24 29 **********
111 2012-09-29 10:58 ? -
112 2012-09-29 12:32 21 **
113 2012-09-29 14:06 21 **
114 2012-09-29 15:40 30 ***********
... ..( 6 skipped). .. ***********
121 2012-09-30 02:38 30 ***********
122 2012-09-30 04:12 ? -
123 2012-09-30 05:46 23 ****
124 2012-09-30 07:20 23 ****
125 2012-09-30 08:54 31 ************
126 2012-09-30 10:28 32 *************
127 2012-09-30 12:02 31 ************
0 2012-09-30 13:36 30 ***********
1 2012-09-30 15:10 30 ***********
2 2012-09-30 16:44 31 ************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
Reply to: