debian sarge + 2.6.11.11 + slmodemd + wvdial = fatal pppd error (exit code = 1)

[dh <dh0d3b@gmail.com>]

Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem
Controller (rev 03)

Модем звонит, всё ок, вот /etc/wvdial.conf

[Dialer Defaults]
Modem = /dev/ttySL0
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Carrier Check = no
Ask Password = no
Stupid Mode = no
Phone = 11-11-11
Username = login
Password = passwd
New PPPD = yes
ISDN = 0
Modem Type = Analog Modem

В итоге "The PPP daemon has died: Fatal pppd error (exit code = 1)".

Далее по списку, вот лог.

$ wvdial
--> WvDial: Internet dialer version 1.54.0
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT11-11-11
--> Waiting for carrier.
ATDT11-11-11
CONNECT 46667
--> Carrier detected. Waiting for prompt.
User Access Verification
Username:
--> Looks like a login prompt.
--> Sending: login
login
Password:
--> Looks like a password prompt.
--> Sending: (password)
Username:
--> Looks like a login prompt.
--> Sending: login
login
Password:
--> Looks like a password prompt.
--> Sending: (password)
Username:
--> Looks like a login prompt.
--> Sending: login
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Sun Jun 5 13:05:40 2005
--> pid of pppd: 4918
--> Disconnecting at Sun Jun 5 13:05:40 2005
--> The PPP daemon has died: Fatal pppd error (exit code = 1)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd
man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
NO CARRIER
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.

и так далее...

+ вот эта хрень в /var/log/massages, но хрень известная..

codec_semaphore: semaphore is not ready
codec_write 1: semaphore is not ready for register

Куда копать? ХЕЛП!