[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#932383: marked as done (reportbug: fails to report against Multi-Arch library, such as libc6)

Your message dated Sat, 14 Dec 2019 18:50:26 +0000
with message-id <E1igCUk-0009vq-U8@fasolo.debian.org>
and subject line Bug#932383: fixed in reportbug 7.6.0
has caused the Debian Bug report #932383,
regarding reportbug: fails to report against Multi-Arch library, such as libc6
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
932383: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=932383
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: reportbug
Version: 7.5.2
Severity: important

tglase@tglase:~ $ dpkg -l libc6
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name           Version      Architecture Description
+++-==============-============-============-=================================
ii  libc6:amd64    2.28-10      amd64        GNU C Library: Shared libraries
ii  libc6:i386     2.28-10      i386         GNU C Library: Shared libraries
ii  libc6:x32      2.28-10      x32          GNU C Library: Shared libraries

So, now I want to report a bug against libc6:

tglase@tglase:~ $ reportbug libc6

(reportbug:14712): dbind-WARNING **: 17:19:07.344: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
*** Welcome to reportbug.  Use ? for help at prompts. ***
Note: bug reports are publicly archived (including the email address of the submitter).
Detected character set: UTF-8
Please change your locale if this is incorrect.

Using 'Thorsten Glaser <tg@mirbsd.de>' as your from address.
Getting status for libc6...
Which of the following packages is the bug in?

 1 glibc-doc          GNU C Library: Documentation
 2 glibc-source       GNU C Library: sources
 3 libc-bin           GNU C Library: Binaries
 4 libc-dev-bin       GNU C Library: Development binaries
 5 libc-l10n          GNU C Library: localization files
 6 libc6              GNU C Library: Shared libraries
 7 libc6-amd64        GNU C Library: 64bit Shared libraries for AMD64
 8 libc6-dbg          GNU C Library: detached debugging symbols
 9 libc6-dev          GNU C Library: Development Libraries and Header Files
10 libc6-dev-amd64    GNU C Library: 64bit Development Libraries for AMD64
11 libc6-dev-i386     GNU C Library: 32-bit development libraries for AMD64
12 libc6-i386         GNU C Library: 32-bit shared libraries for AMD64
13 libc6-pic          GNU C Library: PIC archive library
14 locales            GNU C Library: National Language (locale) data [support]
15 locales-all        GNU C Library: Precompiled locale data
16 multiarch-support  Transitional package to ensure multiarch compatibility
17 nscd               GNU C Library: Name Service Cache Daemon
18 glibc              Source package

Select one of these packages: 6
Getting status for libc6...
Which of the following installed packages is the bug in?

1 libc6  GNU C Library: Shared libraries

2 libc6  GNU C Library: Shared libraries

3 libc6  GNU C Library: Shared libraries

4 libc6  Uninstalled/non-existent package

Select one of these packages: 1
Getting status for libc6...
Please enter the version of the package this report applies to (blank OK)
> 2.28-10
Will send report to Debian (per lsb_release).
Querying Debian BTS for reports on libc6 (source)...
[…]

Why do I have to select the package manually, TWICE, and the second
prompt does not even show which is which (the normal user would be
confused from the same entry showing up two or more times), and it
doesn’t even detect the version right?

Incidentally, after selecting one of them randomly, it doesn’t even
matter as the arch qualifier (e.g. :x32) isn’t even used in the report…

-- Package-specific info:
** Environment settings:
EDITOR="/usr/bin/sensible-editor"
VISUAL="/usr/bin/jupp"
DEBEMAIL="Thorsten Glaser <tg@mirbsd.de>"
INTERFACE="text"

** /home/tglase/.reportbugrc:
reportbug_version "6.6.6"
mode advanced
ui text

-- System Information:
Debian Release: bullseye/sid
  APT prefers unreleased
  APT policy: (500, 'unreleased'), (500, 'buildd-unstable'), (500, 'unstable'), (100, 'experimental')
Architecture: x32 (x86_64)
Foreign Architectures: i386, amd64

Kernel: Linux 4.19.0-5-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_FIRMWARE_WORKAROUND
Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=C (charmap=UTF-8)
Shell: /bin/sh linked to /bin/lksh
Init: sysvinit (via /sbin/init)

Versions of packages reportbug depends on:
ii  apt                1.8.2
ii  python3            3.7.3-1
ii  python3-reportbug  7.5.2
ii  sensible-utils     0.0.12

reportbug recommends no packages.

Versions of packages reportbug suggests:
pn  claws-mail                               <none>
ii  debconf-utils                            1.5.72
ii  debsums                                  2.2.3
pn  dlocate                                  <none>
pn  emacs24-bin-common | emacs25-bin-common  <none>
ii  file                                     1:5.35-4
ii  gnupg                                    2.2.17-3
ii  postfix [mail-transport-agent]           3.4.5-1
pn  python3-urwid                            <none>
pn  reportbug-gtk                            <none>
ii  xdg-utils                                1.1.3-1

Versions of packages python3-reportbug depends on:
ii  apt                1.8.2
ii  file               1:5.35-4
ii  python3            3.7.3-1
ii  python3-apt        1.8.4
ii  python3-debian     0.1.35
ii  python3-debianbts  2.8.2
ii  python3-requests   2.21.0-1

python3-reportbug suggests no packages.

-- no debconf information

--- End Message ---
--- Begin Message --- 
Source: reportbug
Source-Version: 7.6.0

We believe that the bug you reported is fixed in the latest version of
reportbug, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 932383@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Sandro Tosi <morph@debian.org> (supplier of updated reportbug package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Sat, 14 Dec 2019 13:18:07 -0500
Source: reportbug
Architecture: source
Version: 7.6.0
Distribution: unstable
Urgency: medium
Maintainer: Reportbug Maintainers <debian-reportbug@lists.debian.org>
Changed-By: Sandro Tosi <morph@debian.org>
Closes: 922014 932383 933765 938941 941257 941961 944515 944562 946326
Changes:
 reportbug (7.6.0) unstable; urgency=medium
 .
   [ Bastian Venthur ]
   * Update to debianbts 2.10
   * replace mock w/ unittest.mock (available since py3.3)
 .
   [ Salvatore Bonaccorso ]
   * reportbug/debbugs.py
     - allow to fill stretch-pu updates against release.d.o; Closes: #938941
 .
   [ Paul Gevers ]
   * reportbug/debbugs.py
     - Add template to unblock release.debian.org bugs
 .
   [ Nis Martensen ]
   * show name of output file in GTK+ ui; Closes: #941257
   * reportbug/debbugs.py
     - do not show `newcomer` tag in novice mode; Closes: #941961
   * reportbug/ui/text_ui.py
     - fix the total bug count not to be equal only to wishlist bugs;
       Closes: #922014
   * reportbug/utils.py
     - query dpkg status with unambiguous package name; Closes: #932383
 .
   [ Fabrice BAUZAC ]
   * reportbug/ui/urwid_ui.py
     - suggest to install python3-urwid for the urwid UI; Closes: #944562
   * reportbug/ui/gtk_ui.py
     - suggest to install reportbug-gtk for the GTK+ UI; Closes: #944515
 .
   [ Andrei POPESCU ]
   * Download and use maintainer mbox whenever applicable; Closes: #933765
 .
   [ Sandro Tosi ]
   * doc/README.developers
     - add a section describing why bugscripts are executed with LC_ALL=C;
       Closes: #946326
Checksums-Sha1:
 2ab0494a0147d46f158d0da33dac3641d4f69322 1794 reportbug_7.6.0.dsc
 56d286fc0b4a5e79afd3ea2eed04377ebd9677f6 195968 reportbug_7.6.0.tar.xz
 6dc50af18978f7fe039e1ede1102311fe6a70fda 6090 reportbug_7.6.0_source.buildinfo
Checksums-Sha256:
 d07ec81f1c35dc45f2fb47a09e4d94a02927262cf490c54840d3bfcf7aec7802 1794 reportbug_7.6.0.dsc
 24987e23a8d001688243ca33b88dbc0b26ace87833668a101cd0cbda2a2e051a 195968 reportbug_7.6.0.tar.xz
 7d9601db82eaf7bd745d05a8ae365c92bb9e6e5ae136346b7fc8c6531016b661 6090 reportbug_7.6.0_source.buildinfo
Files:
 1ae036c9fbe417695f2a8a488d0bdb66 1794 utils standard reportbug_7.6.0.dsc
 74a9e144df75125a460b38ddb87d2136 195968 utils standard reportbug_7.6.0.tar.xz
 35a0d9448f458cec3ad339e8cd27be53 6090 utils standard reportbug_7.6.0_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=tVkl
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: