Hi
I would like to upload linux version 5.15.3-1 to unstable.
This is a new upstream version and therefore involves an ABI bump.
The pending changes in the package are apart the new upstream imports:
* [arm64] sound/soc/meson: Enable SND_MESON_AXG_SOUND_CARD as module
(Closes: #999638)
* [arm64,armhf] sound/soc/meson: Enable SND_MESON_GX_SOUND_CARD as module
* drivers/bluetooth: Enable BT_HCIBTUSB_MTK (Closes: #999748)
* mac80211: fix radiotap header generation
* [rt] Update to 5.15.2-rt20
* [rt] Refresh "printk: introduce kernel sync mode"
* [rt] Refresh "printk: move console printing to kthreads"
* [rt] Drop "rcutorture: Avoid problematic critical section nesting on
PREEMPT_RT"
* [rt] Drop "lockdep: Let lock_is_held_type() detect recursive read as read"
* [rt] Refresh "x86/softirq: Disable softirq stacks on PREEMPT_RT"
* [rt] Refresh "POWERPC: Allow to enable RT"
Changes from previous uploads to experimental were (apart the imports
of new upstream versions):
* perf srcline: Use long-running addr2line per DSO (Closes: #911815)
* Refresh "Export symbols needed by Android drivers"
* [rt] Update to 5.15.2-rt19
* Input: elantench - fix misreporting trackpoint coordinates (Closes: #989285)
* kernel/time: Enable NO_HZ_FULL (Closes: #804857)
* io-wq: serialize hash clear with wakeup (Closes: #996951)
* [x86] drivers/ptp: Enable PTP_1588_CLOCK_VMW as module
* drivers/ptp: Enable PTP_1588_CLOCK_DTE, PTP_1588_CLOCK_IDT82P33,
PTP_1588_CLOCK_IDTCM, PTP_1588_CLOCK_OCP as modules
* drivers/ptp, net: Enable DP83640_PHY, PTP_1588_CLOCK_INES,
NET_PTP_CLASSIFY, NETWORK_PHY_TIMESTAMPING
* [arm*] drop cc-option fallbacks for architecture selection
* net/tls: Enable TLS as module (Closes: #919807)
* [x86] drivers/hwmon: Enable SENSORS_CORSAIR_PSU as module
* [arm64] drivers/hwmon: Enable SENSORS_GPIO_FAN as module
* [arm*] drivers/led/trigger: Make LEDS_TRIGGER_HEARTBEAT builtin
(Closes: #992184)
* [arm64] sound/soc/codecs: Enable SND_SOC_SPDIF as module
* [armel/rpi] Enable RPi's clock framework and CPU Freq scaling
* [armel/rpi] Change default governor to 'ondemand' for RPi 0/0w/1
(Closes: #991921)
* [arm64] sound/soc/rockchip: Enable SND_SOC_ROCKCHIP_PDM as module
* [armel] Make explicit that -rpi kernel variant is for RPi 0/0w/1, not the
others
* [arm64] drivers/staging/media/hantro: Enable VIDEO_HANTRO as module
* [arm64] drivers/staging/media/rkvdec: Enable VIDEO_ROCKCHIP_VDEC as module
(Closes: #993902)
* [arm] arch/arm/crypto: Enable CRYPTO_BLAKE2S_ARM, CRYPTO_SHA256_ARM and
CRYPTO_SHA512_ARM as modules
* [armhf] arch/arm/crypto: Enable most NEON based implementation of
cryptographic algorithms as modules
* [arm] Move CRYPTO_NHPOLY1305_NEON in armhf config file
* [arm64] drivers/gpu/drm/vmwgfx: Enable DRM_VMWGFX as module
(Closes: #995276)
* [armhf] sound/soc/sunxi: Enable SND_SUN4I_I2S as module (Closes: #971892)
* [armhf] drivers/gpu/drm/bridge/synopsys: Enable DRM_DW_HDMI_I2S_AUDIO as
module
* drivers/usb/serial: Enable USB_SERIAL_XR as module (Closes: #996962)
* drivers/bus/mhi: Enable MHI_BUS, MHI_BUS_PCI_GENERIC as modules
(Closes: #995407)
* drivers/net: Enable MHI_NET as module
* drivers/net/wwan: Enable WWAN, MHI_WWAN_CTRL as modules
* [mipsel,mips64el/loongson-3] linux-image: Recommend pmon-update
* Compile with gcc-11 on all architectures
* [arm64] drivers/net: Enable VMXNET3 as module
* [arm64] Enable various symbols for the librem5 devkit and iMX8MN Variscite
Symphony (Patches by Guido Günther and Ariel D'Alessandro)
* [armhf,arm64] Cherrypick fix for snvs_pwrkey to prevent a machine hang.
* [arm64] drivers/mtd/spi-nor: enable MTD_SPI_NOR as module
* [arm64] drivers/net/can/spi: enable CAN_MCP251X as module
* [arm64] drivers/net/phy: enable MICROSEMI_PHY as module
* [arm64] drivers/net/usb: enable USB_NET_SMSC95XX as module
* [arm64] Enable TOUCHSCREEN_RASPBERRYPI_FW and
REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY (Closes: #977575)
* [arm64] drivers/regulator: Enable REGULATOR_BD718XX as module
* [armhf] Add support for Marvell MMP3
* [armhf] Enable SND_MMP_SOC_SSPA, COMMON_CLK_MMP2_AUDIO, PHY_MMP3_USB,
MFD_ENE_KB3930 and LEDS_ARIEL as modules.
* [armel] marvell: Enable CONFIG_SENSORS_LM63 as a module.
* [arm64] enable i6300esb watchdog kernel module
* drivers/md: Enable DM_VERITY_FEC
* [riscv64] Enable NUMA (Closes: #993453)
Regards,
Salvatore
Attachment:
signature.asc
Description: PGP signature