Hello Till,
On Fri, Mar 09, 2012 at 07:48:18PM +0100, Till Kamppeter wrote:
> I do not see any problem with your PPD. I can print with it on my HP
> PostScript printers without problem.
Ok. Btw., I expected this, as earlier versions work with this.
> Can you print with the manufacturer-supplied PPD file? The
> manufacturer-supplied PPD sends some PJL directives to the printer
> before sending the PostScript code. Perhaps the Kyocera printers need
> this.
I'm not sure how I should try this. I have to queues I see e.g. in
mozilla: FS-1020D and Kyocera_FS-1020D, the latter has a copyright by
my manufacturer in it. Both work with earlier versions and both don't
work with current version.
> Till
>
>
> On 03/09/2012 04:47 PM, Helge Kreutzmann wrote:
> >Hello Till,
> >On Thu, Mar 08, 2012 at 10:22:33PM +0100, Till Kamppeter wrote:
> >>I have checked your error_log and it shows one job which has
> >>successfully completed. I assume that this is the job which did not
> >>print for you.
> >
> >Yes.
> >
> >>First, a reasonable amount of data gets sent to the printer but it
> >>does not make the printer printing something.
> >>
> >>Second, your attached error_log has only the following part which
> >>looks strange:
> >>
> >>----------
> >>D [08/Mar/2012:21:04:00 +0100] [Job 233] Options from the PPD file:
> >>D [08/Mar/2012:21:04:00 +0100] [Job 233]
> >>D [08/Mar/2012:21:04:00 +0100] [Job 233]
> >>================================================
> >>D [08/Mar/2012:21:04:00 +0100] [Job 233]
> >>D [08/Mar/2012:21:04:00 +0100] [Job 233] File:<STDIN>
> >>D [08/Mar/2012:21:04:00 +0100] [Job 233]
> >>D [08/Mar/2012:21:04:00 +0100] [Job 233]
> >>================================================
> >>----------
> >>
> >>This makes the impression that foomatic-rip did not read any options
> >>from the PPD file.
> >>
> >>Please run the command
> >>
> >>ls -l /etc/cups/ppd/FS-1020D.ppd
> >
> >root@sneo:~# ls -l /etc/cups/ppd/FS-1020D.ppd
> >-rw-r--r-- 1 root root 9777 Aug 28 2011 /etc/cups/ppd/FS-1020D.ppd
> >root@sneo:~# ls -l /etc/cups/ppd/*
> >-rw-r--r-- 1 root root 9777 Aug 28 2011 /etc/cups/ppd/FS-1020D.ppd
> >-rw-r--r-- 1 root root 33401 Aug 28 2011 /etc/cups/ppd/Kyocera_FS-1020D.ppd
> >-rw-r--r-- 1 root lpadmin 33421 Okt 15 2008 /etc/cups/ppd/Kyocera-neu.ppd
> >-rw-r--r-- 1 root lpadmin 33421 Aug 4 2005 /etc/cups/ppd/Kyocera.ppd
> >
> >>and attach your /etc/cups/ppd/FS-1020D.ppd file.
> >
> >Done.
> >
> >>Thanks.
> >>
> >> Till
> >>
> >>
> >>On 03/08/2012 09:19 PM, Helge Kreutzmann wrote:
> >>>Hello,
> >>>On Mon, Mar 05, 2012 at 12:32:02PM +0100, Till Kamppeter wrote:
> >>>>We need some more information about your problem. First, can you tell
> >>>>us which printer (manufacturer/model), connection type (USB,
> >>>
> >>>Kyocera Ecosys FS-1020D, now connected via USB (used to be parallel, I
> >>>still have the conection wired to the old (shut down) machine).
> >>>
> >>>>Parallel, USB->Parallel adapter, network, ...), driver you are using?
> >>>
> >>>Driver?? None specifilly. Or do you men ppd file?
> >>>
> >>>>Can you also follow the instructions of the sections "CUPS error_log"
> >>>>and "Capturing print job data" on
> >>>>https://wiki.ubuntu.com/DebuggingPrintingProblems. The site is for
> >>>>Ubuntu, but the steps of the mentioned sections also work under
> >>>>Debian. If "sudo<command>" does not work or if some administrative
> >>>>command of CUPS does not work, run the command in a second terminal
> >>>>window where you get root via "su -", without the "sudo " in the
> >>>>beginning.
> >>>
> >>>Ok.
> >>>
> >>>>Note that we need this information to be able to fix the bug.
> >>>
> >>>Fine.
> >>>
> >>>a) There is no »ubuntu-bug« within Debian main (testing).
> >>>b) apport-collect does not exist neither
> >>>c) Output of printdebuginfo:
> >>>== System information ==
> >>>Ubuntu Release : testing (wheezy)
> >>>Desktop Environment: none
> >>>Architecture : x86_64
> >>>Kernel : 3.2.9sneo.01-grsec
> >>>Locale : LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8, LC_PAPER=de_DE.UTF-8
> >>>/etc/papersize : a4
> >>>
> >>>== Configured printers ==
> >>>FS-1020D: Kyocera FS-1020D Foomatic/Postscript
> >>>Kyocera-neu: Kyocera Mita FS-1020D
> >>>Kyocera: Kyocera Mita FS-1020D
> >>>Kyocera_FS-1020D: Kyocera Mita FS-1020D
> >>>device for FS-1020D: usb://Kyocera/FS-1020D?serial=XAX5560374
> >>>device for Kyocera_FS-1020D: usb://Kyocera/FS-1020D?serial=XAX5560374
> >>>
> >>>== Installed versions of important printing packages ==
> >>>ii cups-ppdc 1.5.2-5 Common UNIX Printing System(tm) - PPD manipulation utilities
> >>>ii foomatic-filters 4.0.12-1 OpenPrinting printer support - filters
> >>>ii gs-cjk-resource 1.20100103-3 Resource files for gs-cjk, ghostscript CJK-TrueType extension
> >>>ii hp-ppd 0.9-0.2 HP Postscript Printer Definition (PPD) files
> >>>ii hpijs 3.11.12-2 transitional dummy package for hpijs printer driver
> >>>ii libcupsppdc1 1.5.2-5 Common UNIX Printing System(tm) - PPD manipulation library
> >>>ii printer-driver-gutenprint 5.2.7-5 printer drivers for CUPS
> >>>ii system-config-printer 1.3.7-3 graphical interface to configure the printing system
> >>>
> >>>Created with printingbuginfo script v1.5 (https://wiki.ubuntu.com/PrintingBugInfoScript)
> >>>Thu, 08 Mar 2012 20:54:48 +0100
> >>>
> >>>d) 1. Connected, powered on (on not working foomatic version)
> >>> 2. root@sneo:/tmp# lsmod | grep usb
> >>> usblp 12593 0
> >>> usbhid 30418 0
> >>>
> >>> 3.-5: tail -f /var/log/syslog
> >>> Mar 8 20:56:27 sneo kernel: usblp0: removed
> >>> Mar 8 20:56:46 sneo kernel: usb 4-5.2: new full-speed USB device number 4 using ohci_hcd
> >>> Mar 8 20:56:46 sneo kernel: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x0482 pid 0x000E
> >>> Mar 8 20:56:46 sneo mtp-probe: checking bus 4, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2"
> >>> Mar 8 20:56:46 sneo mtp-probe: bus: 4, device: 4 was not an MTP device
> >>> Mar 8 20:56:47 sneo udev-configure-printer: add /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2/4-5.2:1.0
> >>> Mar 8 20:56:47 sneo udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2
> >>> Mar 8 20:56:47 sneo udev-configure-printer: Device already handled
> >>> Mar 8 20:56:47 sneo udev-configure-printer: add /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2/4-5.2:1.0/usb/lp0
> >>> Mar 8 20:56:47 sneo udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5.2
> >>> Mar 8 20:56:47 sneo udev-configure-printer: Device already handled
> >>>
> >>> 6. lsusb:
> >>> ...
> >>> Bus 004 Device 004: ID 0482:000e Kyocera Corp. FS-1020D Printer
> >>>
> >>> 7. ls -l /dev/usb/lp* /dev/bus/usb/*/*
> >>> crw-rw-r-T 1 root root 189, 0 Mär 8 20:54 /dev/bus/usb/001/001
> >>> crw-rw-r-T 1 root root 189, 128 Mär 8 20:54 /dev/bus/usb/002/001
> >>> crw-rw-r-T 1 root root 189, 256 Mär 8 20:54 /dev/bus/usb/003/001
> >>> crw-rw-r-T 1 root root 189, 384 Mär 8 20:54 /dev/bus/usb/004/001
> >>> crw-rw-r-T 1 root root 189, 385 Mär 8 20:54 /dev/bus/usb/004/002
> >>> crw-rw-r-T 1 root lp 189, 386 Mär 8 20:52 /dev/bus/usb/004/003
> >>> crw-rw-r-T 1 root lp 189, 387 Mär 8 20:56 /dev/bus/usb/004/004
> >>> crw-rw-r-T 1 root root 189, 512 Mär 8 20:54 /dev/bus/usb/005/001
> >>> crw-rw-r-T 1 root root 189, 513 Mär 8 20:54 /dev/bus/usb/005/002
> >>> crw-rw-r-T 1 root root 189, 640 Mär 8 20:54 /dev/bus/usb/006/001
> >>> crw-rw-r-T 1 root root 189, 768 Mär 8 20:54 /dev/bus/usb/007/001
> >>> crw-rw---T 1 root lp 180, 0 Mär 8 20:56 /dev/usb/lp0
> >>>
> >>> 8. usb_printerid /dev/usb/lp0 (installed printer-driver-foo2zjs for
> >>> this test):
> >>> GET_DEVICE_ID string:
> >>> ID:FS-1020D;MFG:Kyocera;CMD:PCLXL,PostScript Emulation,PCL5E,PJL;MDL:FS-1020D;CLS:PRINTER;DES:Kyocera Mita FS-1020D;CID:HP Laserjet 1300 Series;
> >>>
> >>> usb_printerid /dev/usb/lp1
> >>> Error: No such file or directory: can't open '/dev/usb/lp1'
> >>>
> >>> lpinfo -v
> >>> network beh
> >>> network http
> >>> network ipps
> >>> network https
> >>> network ipp
> >>> direct usb://Kyocera/FS-1020D?serial=XAX5560374
> >>> network lpd
> >>> network socket
> >>> direct scsi
> >>> network smb
> >>>
> >>>e) 2) CUPS error log is already on debug, but ran "cupsctl
> >>> LogLevel=debug" anyway
> >>>
> >>> /etc/init.d/cups restart (not cupsys!)
> >>>
> >>> 6) lpr /etc/passwd
> >>> Printer warms up, receiving lights appear (normally the next would
> >>> be actual print out), but nothing appears
> >>>
> >>> lpq retunrs nothing, and
> >>> root@sneo:/tmp# echo $?
> >>> 0
> >>>
> >>> Waited a moment, then attached the error log
> >>>
> >>>f) 1. cancel -a
> >>> No output
> >>>
> >>> 2. cupsdisable FS-1020D
> >>> No output
> >>>
> >>> 3. root@sneo:/tmp# lpr /etc/passwd
> >>> root@sneo:/tmp# lpstat -o
> >>> FS-1020D-234 root 2048 Do 08 Mär 2012
> >>> 21:10:04 CET
> >>>
> >>> 4. ls -1 /var/spool/cups
> >>> c00234
> >>> d00234-001
> >>> tmp
> >>>
> >>> 5. root@sneo:/tmp# cupsenable FS-1020D
> >>> root@sneo:/tmp# lpq
> >>>
> >>>
> >>> But nothing gets printed
> >>>
> >>> 6. file
> >>> /home/helge/download/printout: ASCII text
> >>>
> >>> root@sneo:/tmp# diff -u /home/helge/download/printout /etc/passwd
> >>> root@sneo:/tmp# echo $?
> >>> 0
> >>>
> >>> 7. Ooops, nope, won't do that. Please tell me, if you really need
> >>> it, than I'll repeat the steps with a different file.
> >>>
> >>>Please let me know if I should try/do something else. (But give me 1-2
> >>>days to respond, I'm not every night online atm).
> >>>
> >>>Thanks for taking care and this extensive documentation for reporting.
> >
> >Greetings
> >
> > Helge
>
--
Dr. Helge Kreutzmann debian@helgefjell.de
Dipl.-Phys. http://www.helgefjell.de/debian.php
64bit GNU powered gpg signed mail preferred
Help keep free software "libre": http://www.ffii.de/
Attachment:
signature.asc
Description: Digital signature