Bug#519063: debsums warnings due to hplip-data
Package: hplip
Version: 3.9.2-1
Severity: normal
Hi,
I have the debsums package installed on my sid. So one a week, debsums
verifies the packages integrity. I have just installed the hplip
package with hpijs. And debsums gives that :
/etc/cron.weekly/debsums:
debsums: can't open hplip-data file /usr/share/hplip/pcard/__init__.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/pcard/photocard.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/copier/__init__.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/copier/copier.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/base/exif.pyc (No such file or directory)
/usr/share/hplip/base/strings.pyc
/usr/share/hplip/base/slp.pyc
/usr/share/hplip/base/codes.pyc
/usr/share/hplip/base/models.pyc
/usr/share/hplip/base/utils.pyc
/usr/share/hplip/base/maint.pyc
/usr/share/hplip/base/pml.pyc
/usr/share/hplip/base/__init__.pyc
/usr/share/hplip/base/pexpect.pyc
/usr/share/hplip/base/module.pyc
/usr/share/hplip/base/device.pyc
debsums: can't open hplip-data file /usr/share/hplip/base/vcard.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/base/ldif.pyc (No such file or directory)
/usr/share/hplip/base/tui.pyc
debsums: can't open hplip-data file /usr/share/hplip/base/dime.pyc (No such file or directory)
/usr/share/hplip/base/status.pyc
/usr/share/hplip/base/mdns.pyc
/usr/share/hplip/base/logger.pyc
/usr/share/hplip/base/g.pyc
/usr/share/hplip/prnt/ldl.pyc
/usr/share/hplip/prnt/__init__.pyc
/usr/share/hplip/prnt/pcl.pyc
/usr/share/hplip/prnt/colorcal.pyc
/usr/share/hplip/prnt/cups.pyc
/usr/share/hplip/installer/dcheck.pyc
/usr/share/hplip/installer/__init__.pyc
debsums: can't open hplip-data file /usr/share/hplip/fax/faxdevice.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/fax/coverpages.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/fax/__init__.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/fax/fax.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/fax/soapfax.pyc (No such file or directory)
debsums: can't open hplip-data file /usr/share/hplip/fax/pmlfax.pyc (No such file or directory)
/usr/share/hplip/installer/core_install.pyc
Theses files are present when I do "dpkg -L hplip-data", but don't
exist really. For example :
8:59 giggz@thor ~ % ll /usr/share/hplip/base/
total 1,1M
-rw-r--r-- 1 root root 26K mar 9 02:55 codes.py
-rw-r--r-- 1 root root 19K mar 9 20:06 codes.pyc
-rw-r--r-- 1 root root 85K mar 9 02:55 device.py
-rw-r----- 1 root root 63K mar 9 20:06 device.pyc
-rw-r--r-- 1 root root 3,4K mar 9 02:55 dime.py
-rw-r--r-- 1 root root 36K mar 9 02:55 exif.py
-rw-r--r-- 1 root root 11K mar 9 02:55 g.py
-rw-r--r-- 1 root root 12K mar 9 20:06 g.pyc
-rw-r--r-- 1 root root 5,8K mar 9 02:55 imagesize.py
-rw-r--r-- 1 root root 798 mar 9 02:55 __init__.py
-rw-r--r-- 1 root root 120 mar 9 20:06 __init__.pyc
-rw-r--r-- 1 root root 17K mar 9 02:55 ldif.py
-rw-r--r-- 1 root root 12K mar 9 02:55 logger.py
-rw-r--r-- 1 root root 12K mar 9 20:06 logger.pyc
-rw-r--r-- 1 root root 64K mar 9 02:55 magic.py
-rw-r--r-- 1 root root 43K mar 9 02:55 maint.py
-rw-r----- 1 root root 36K mar 9 20:27 maint.pyc
-rw-r--r-- 1 root root 9,6K mar 9 02:55 mdns.py
-rw-r----- 1 root root 7,5K mar 9 20:06 mdns.pyc
-rw-r--r-- 1 root root 18K mar 9 02:55 mfpdtf.py
-rw-r--r-- 1 root root 16K mar 9 02:55 models.py
-rw-r----- 1 root root 12K mar 9 20:06 models.pyc
-rw-r--r-- 1 root root 25K mar 9 02:55 module.py
-rw-r----- 1 root root 17K mar 9 20:06 module.pyc
-rw-r--r-- 1 root root 61K mar 9 02:55 pexpect.py
-rw-r----- 1 root root 51K mar 9 20:06 pexpect.pyc
-rw-r--r-- 1 root root 26K mar 9 02:55 pml.py
-rw-r----- 1 root root 23K mar 9 20:06 pml.pyc
-rw-r--r-- 1 root root 5,6K mar 9 02:55 slp.py
-rw-r----- 1 root root 4,3K mar 9 20:06 slp.pyc
-rw-r--r-- 1 root root 52K mar 9 02:55 status.py
-rw-r----- 1 root root 30K mar 9 20:06 status.pyc
-rw-r--r-- 1 root root 24K mar 9 02:55 strings.py
-rw-r----- 1 root root 14K mar 9 20:06 strings.pyc
-rw-r--r-- 1 root root 14K mar 9 02:55 tui.py
-rw-r----- 1 root root 13K mar 9 20:06 tui.pyc
-rw-r--r-- 1 root root 47K mar 9 02:55 utils.py
-rw-r----- 1 root root 48K mar 9 20:06 utils.pyc
-rw-r--r-- 1 root root 44K mar 9 02:55 vcard.py
I don't have any vcard.pyc.
Thx a lot.
Cheers,
Guillaume
-- Package-specific info:
error: NOT FOUND OR FAILED TO LOAD!
error: Version: (Not available. CUPS may not be installed or not running.)
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
HP Linux Imaging and Printing System (ver. 3.9.2)
Dependency/Version Check Utility ver. 14.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux thor 2.6.28.7-2 #1 Sat Mar 7 11:02:25 CET 2009 i686 GNU/Linux
Distribution:
debian unstable
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.4 installed
Checking PyQt 4.x version...
Checking for CUPS...
Status: l’ordonnanceur tourne
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
------------------------
| RUNTIME DEPENDENCIES |
------------------------
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency: PyQt 4- Qt interface for Python (for Qt version 4.x)...
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
Checking for dependency: Python ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.9.2 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=3.9.2.49
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 03/10/09 08:54:40
version = 3.9.2.49
-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------
No warning: No queues found.
error: 5 errors and/or warnings.
devices found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
-----------
| SUMMARY |
-----------
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.28.7-2
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to fr_FR.UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages hplip depends on:
ii adduser 3.110 add and remove users and groups
ii coreutils 7.1-2 The GNU core utilities
ii cups 1.3.9-14+b1 Common UNIX Printing System(tm) -
ii hplip-data 3.9.2-1 HP Linux Printing and Imaging - da
ii libc6 2.9-4 GNU C Library: Shared libraries
ii libcups2 1.3.9-14+b1 Common UNIX Printing System(tm) -
ii libdbus-1-3 1.2.12-1 simple interprocess messaging syst
ii libsane 1.0.19-26 API library for scanners
ii libsnmp15 5.4.1~dfsg-12 SNMP (Simple Network Management Pr
ii libssl0.9.8 0.9.8g-15 SSL shared libraries
ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library
ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip
ii python 2.5.4-2 An interactive high-level object-o
ii python-dbus 0.83.0-1 simple interprocess messaging syst
ii python-imaging 1.1.6-3 Python Imaging Library
ii python-support 0.8.7 automated rebuilding support for P
Versions of packages hplip recommends:
ii cups-client 1.3.9-14+b1 Common UNIX Printing System(tm) -
ii hpijs 3.9.2-1 HP Linux Printing and Imaging - gs
ii sane-utils 1.0.19-26 API library for scanners -- utilit
Versions of packages hplip suggests:
pn hplip-doc <none> (no description available)
pn hplip-gui <none> (no description available)
pn kdeprint | gtklp | xpp <none> (no description available)
pn openprinting-ppds <none> (no description available)
-- no debconf information
Reply to: