[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#373793: marked as done (Etch cupsys upgrade; print test page prints parts of page over 8 sheets of paper)

Your message dated Sun, 1 Jun 2008 23:09:06 +0200
with message-id <20080601210906.GB6509@piware.de>
and subject line Cleaning up old bug reports
has caused the Debian Bug report #373793,
regarding Etch cupsys upgrade; print test page prints parts of page over 8 sheets of paper
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
373793: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=373793
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: cupsys
Version: 1.2.1-2
After the upgrade opened http://localhost:631/admin and checked printers. When I tried to print a test page the first sheet had just a scaled ruler (mm) at the top of page, 2nd page was blank. 3rd page had Printer Test Page near top, 4th was blank. 5th page had sideways M and W and the 6th had the complete color wheel, gray ramp and 1 degree radial lines. 7th page had the top of the next section, imageable area and interpreter info and the 8th [page had the rest of the test page with a scaled ruler )inches) at the very bottom. Along both side of the pages was a sting of numbers. I opened HP Toolbox and was able to print a test page from there, correctly done. I can print from Firefox, gedit, OpenOffice and acrobat reader. Tried to add new printer but the result was the same. Additionally the correct ppd files were not listed in the Model/Driver box, had to use the Browse option to find the correct ppd file. I also tried to purge and re-install the cups related packages, but did not help. Setting for printers were not changed and seem to be correct. I have the hplip and hpijs packages installed ( 0.9.7-4 and 2.1.7+0.9.7-4). Everything worked correctly before upgrade. 

Cupsys  config file:

# Show general information in error_log.
LogLevel info
SystemGroup lpadmin
# Disable printer sharing and shared printers.
Browsing Off
DefaultAuthType Basic
<Location />
  # Restrict access to the server...
  Order allow,deny
  Allow localhost
</Location>
<Location /admin>
  Encryption Required
  # Restrict access to the admin pages...
  Order allow,deny
  Allow localhost
</Location>
<Location /admin/conf>
  AuthType Basic
  Require user @SYSTEM
  # Restrict access to the configuration files...
  Order allow,deny
  Allow localhost
</Location>
<Policy default>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job> 
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
<Limit Pause-Printer Resume-Printer Set-Printer-Attributes Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs CUPS-Reject-Jobs CUPS-Set-Default> 
    AuthType Basic
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  <Limit CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  # Only the owner or an administrator can cancel a job...
  <Limit Cancel-Job>
    Order deny,allow
    Require user @OWNER @SYSTEM
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
Include /etc/cups/cups.d/ports.conf
Include /etc/cups/cups.d/browse.conf
# Only listen for connections from the local machine.
Listen 127.0.0.1:631
Listen /var/run/cups/cups.sock
System Info: P4 2.4C w/HT enabled, Abit BH7, 512MB 3200 DDR, Seagate 160GB HDD, Maxtor 120GB HDD, 
                     Sony CD-RW, Lite-On CD-RW.
Linux Debian-SS2 2.6.16.20060604-ss2 #1 SMP PREEMPT Sun Jun 4 17:06:15 EDT 2006 i686 GNU/Linux
0000:00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02) 0000:00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 02) 0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) 0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) 
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
0000:00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1) 0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:05.0 Serial controller: 3Com Corp, Modem Division 56K FaxModem Model 5610 (rev 01) 

Bus 001 Device 006: ID 04b8:0121 Seiko Epson Corp. Perfection 2840 Photo
Bus 001 Device 001: ID 0000:0000 Bus 002 Device 004: ID 03f0:1712 Hewlett-Packard Business Inkjet 1000 Bus 002 Device 001: ID 0000:0000 Bus 002 Device 002: ID 046d:c025 Logitech, Inc. MX500 Optical Mouse Bus 003 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000

--- End Message ---
--- Begin Message --- 
Dear bug submitter,

This bug was reported against a very old version of cups (older than
in the current stable Debian version "Etch"). About a year ago,
Martin-Eric Racine asked for feedback whether the bug still applied to
the current Debian Etch version, but we did not get any feedback. In
order to not keep around old, hardware-specific, and inactive bugs
around forever, I close this bug now.

Please report back if you still experience the problem with the
current version in Etch; if you can test Lenny/unstable, that would be
highly appreciated, of course. I will reopen this bug then.

Thank you for your report!

Martin
-- 
Martin Pitt                        | http://www.piware.de
Ubuntu Developer (www.ubuntu.com)  | Debian Developer  (www.debian.org)

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: