Powerbook5,6: keyboard's backlight
Hello!
I have a powerbook5,6 15" recently bought. Mi message is about keyboard
backlight ilumination which does not like to work. I have installed pbbuttonsd | gtkpbbuttons-gnome | powerprefs. I have the kernel modules to run sensors (i2c-dev and some others). When running powerprefs, in the "bulb tab", the "keyboard"
and "Autoadjust" tabs appear in grey (not accesible). How can I do to
run keyboard's backlight? I read about the daemon lmud but I don't know
how to get and install it.
Can anybody help me? I enclose my /etc/pbbuttonsd.conf
Regards.
# Configuration file for pbbuttonsd >= version 0.5
# for options see man pbbuttonsd.conf
[SYSTEM]
#userallowed
= "" ; user who is allowed to use
IPC
autorescan
= no ; automatic rescan of event
devices
CmdTimeout
= 8 ; timeout in seconds for
launched scripts, etc.
[MODULE PMAC]
dev_PMU = "/dev/pmu"
dev_ADB = "/dev/adb"
TPModeUpKey = 225 + alt
TPModeDownKey = 224 + alt
TPMode
= notap ; 'notap', 'tap', 'drag'
or 'lock'
KBDMode
= fkeysfirst ; 'fkeyslast' or 'fkeysfirst'
Batlog
= none ; 'none', 'cycle' or 'log'
NoTapTyping
= no ; switch trackpad to
'notap-mode' while typing
[MODULE POWERSAVE]
onAC_Policy
= performance ; 'nochange', 'powersave', 'custom' or
'performance'
onAC_TimerAction = none
; 'none', 'suspend-to-ram', 'suspend-to-disk' or
'blankscreen'
onAC_CoverAction = suspend-to-ram ; see TimerAction for possible values
onAC_KeyAction =
none ; Action (see TimerAction)
for the sleepkey
onAC_SuspendTime = 0
onAC_DimTime = 0
onBattery_Policy =
powersave ; 'nochange', 'powersave', 'custom' or
'performance'
_onBattery_TimerAction_ = none ; 'none', 'suspend-to-ram', 'suspend-to-disk' or 'blankscreen'
_onBattery_CoverAction_ = suspend-to-ram ; see TimerAction for possible values
onBattery_KeyAction = none ; Action (see TimerAction) for the sleepkey
_onBattery_SuspendTime_ = 0
onBattery_DimTime = 0
SleepKey = 116
SleepKeyDelay =
0 ; values > 0 may be
dangerous, if the power key is used to trigger sleep
BWL_first
= 22 ; first battery warnlevel,
time in minutes
BWL_second
= 10 ; second battery warnlevel,
time in minutes
BWL_last
= 3 ; last battery warnlevel, time
in minutes
Script_PMCS = "/etc/power/pmcs-pbbuttonsd %s %s %s"
EmergencyAction =
sleep ; action, if battery is
critically low
HeartbeatBeep =
no ; beep, if nothing else showed
that the computer lives
CPULoad_sleeplock = yes
CPULoad_min
= 20 ; value in percent
CPULoad_period = 20 ; time in seconds
NETLoad_sleeplock = yes
NETLoad_min
= 4096 ; traffic in Bytes/s
NETLoad_period = 20 ; time in seconds
NETLoad_device = "eth0"
[MODULE DISPLAY]
LCD_Brightness =
15 ; initial LCD brightness level
LCD_FadingSpeed = 5 ; 0 = no smooth fading
LCD_AutoAdjust =
yes ; only on Aluminum PowerBooks
LCD_IllumUpKey = 60 + ctrl
LCD_IllumDownKey = 59 + ctrl
LCD_Threshold =
94 ; ambient light threshold in
percent for backlight autoadj.
LCD_AutoAdjMin_Bat = 2 ; autoadjustment range parameters
LCD_AutoAdjMax_Bat = 7
LCD_AutoAdjMin_AC = 1
LCD_AutoAdjMax_AC = 15
KBD_Brightness =
0 ; initial keyboard illumination
level
KBD_OnBrightness = 5
; initial level if KBD on/off key is pressed
KBD_FadingSpeed = 5 ; 0 = no smooth fading
KBD_AutoAdjust =
yes ; only on Aluminum PowerBooks
KBD_IllumUpKey = 68 + ctrl
KBD_IllumDownKey = 67 + ctrl
KBD_IllumOnKey = 66 + ctrl
KBD_Threshold =
28 ; ambient light threshold in
percent for keyboard light autoadj.
dev_FrameBuffer = "/dev/fb0"
UseFBBlank = no
DimFullyDark = yes
CRT_MirrorKey = 65 + ctrl
[MODULE CDROM]
dev_CDROM = "/dev/cdrom"
EjectCDKey = 161
EjectCDKeyDelay = 0
[MODULE MIXER]
SoundSystem
= ALSA ; 'none', 'auto', 'OSS' or
'ALSA'
OSS_Device = "/dev/mixer"
OSS_Channels = "volume, speaker"
Volume
= 68 ; initial volume level
Speakers_muted = no ; mute after startup?
VolumeUpKey = 63 + ctrl
VolumeDownKey = 62 + ctrl
MuteKey = 61 + ctrl
MixerInitDelay = no
ALSA_Card = "default"
ALSA_Elements = "Master, 'PC Speaker'"
Reply to: