Re: sudden power loss on tibook
On Fri, Sep 02, 2005 at 12:49:41PM +0200, Michael Schmitz wrote:
>
> Pardon me piping up from the peanut gallery ...
>
> Do we have a clear picture of the hardware/software combination this bug
> is triggered by?
>
> In particular:
>
> - only tibook? What about iBook or later (Al-) PowerBooks?
ibook g4 12"
revision : 0.1 (pvr 8003 0101)
detected as : 287 (iBook G4)
> - running pbbuttonsd (version?), no pmud present?
ii pbbuttonsd 0.7.1-1 PBButtons daemon to
no pmud
> - running some version of mouseemu?
none
> - are you using either pbbuttonsd or mouseemu to block the trackpad while
> typing?
no.
NoTapTyping = no
> We've been bouncing a few ideas around WRT interaction between events and
> PMU but that didn't help much.
>
> If we can get a clearer picture about what usage pattern tends to
> interfere with PMU/host communication, or generally locks out interrupts,
> we could ask more specific questions on LKML.
It happens when in battery, and if i recall right, once also in AC.
When i put it to sleep, i just unplug the wireless usb card and close the lid.
No other actions have been configure.
Just an idea: overheating and not running the fan? Some apple thing finds it
is getting too hot and unplugs the power?
Attached pbbuttonsd.conf
--
Jesus Climent info:www.pumuki.org
Unix SysAdm|Linux User #66350|Debian Developer|2.6.12|Helsinki Finland
GPG: 1024D/86946D69 BB64 2339 1CAA 7064 E429 7E18 66FC 1D7F 8694 6D69
# Configuration file for PBButtonsd >= Version 0.5
# for complete list of options please see pbbuttonsd.conf man-page
# [SYSTEM]
#userallowed = "paranoid" ; user who is allowed to use IPC
autorescan = no ; automatic rescan of event devices
CmdTimeout = 4
# [MODULE POWERSAVE]
onAC_policy = performance ; nochange, performance, custom or powersave
onAC_TimerAction = none ; none, suspend-to-ram, suspend-to-disk, blankscreen
onAC_CoverAction = suspend-to-ram
onAC_KeyAction = suspend-to-ram ; SleepKey
onAC_SuspendTime = 0 ; time in 1/10 seconds
onAC_DimTime = 0 ; time in 1/10 seconds
onBattery_policy = powersave
onBattery_TimerAction = suspend-to-ram ; none, suspend-to-ram, suspend-to-disk, blankscreen
onBattery_CoverAction = suspend-to-ram
onBattery_KeyAction = suspend-to-ram ; SleepKey
onBattery_SuspendTime = 3000 ; time in 1/10 seconds
onBattery_DimTime = 600 ; time in 1/10 seconds
SleepKey = 116
SleepKeyDelay = 0 ; values > 0 may be dangerous, if the power key is used to trigger sleep
BWL_first = 22 ; first battery warnlevel, time in minutes
BWL_second = 10 ; second battery warnlevel, time in minutes
BWL_last = 3 ; last battery warnlevel, time in minutes
Script_PMCS = "/etc/power/pmcs-pbbuttonsd %s %s %s"
EmergencyAction = sleep ; action, if battery is critically low
HeartbeatBeep = no ; beep, if nothing else showed that the computer lives
CPULoad_sleeplock = yes
CPULoad_min = 20 ; value in percent
CPULoad_period = 20 ; time in seconds
NETLoad_sleeplock = yes
NETLoad_min = 4096 ; traffic in Bytes/s
NETLoad_period = 20 ; time in seconds
NETLoad_device = "eth0"
# [MODULE DISPLAY]
#LCD_Brightness = 8 ; initial LCD brightness level
LCD_FadingSpeed = 5 ; 0 = no smooth fading
LCD_AutoAdjust = yes ; only on Aluminum PowerBooks
LCD_IllumUpKey = 225
LCD_IllumDownKey = 224
LCD_Threshold = 94
LCD_AutoAdjMin_Bat = 2 ; autoadjust parameter
LCD_AutoAdjMax_Bat = 7
LCD_AutoAdjMin_AC = 1
LCD_AutoAdjMax_AC = 15
#KBD_Brightness = 0 ; initial keyboard illumination level
KBD_OnBrightness = 5 ; initial level if KBD on/off key is pressed
KBD_FadingSpeed = 5 ; 0 = no smooth fading
KBD_AutoAdjust = yes ; only on Aluminum PowerBooks
KBD_IllumUpKey = 230
KBD_IllumDownKey = 229
KBD_IllumOnKey = 228
KBD_Threshold = 28 ; only on Aluminum PowerBooks
dev_FrameBuffer = "/dev/fb0"
UseFBBlank = yes
DimFullyDark = no
CRT_MirrorKey = 65 + ctrl
# [MODULE MIXER]
SoundSystem = ALSA ; none, auto, OSS or ALSA
#Volume = 50 ; initial volume level
Speakers_muted = no ; mute after startup?
VolumeUpKey = 115
VolumeDownKey = 114
MuteKey = 113
OSS_Mixer = "/dev/mixer" ; settings for OSS
OSS_Channels = "volume, speaker"
ALSA_Card = "default" ; settings for ALSA
ALSA_Elements = "Master, 'PC Speaker'"
MixerInitDelay = no
# [MODULE CDROM]
dev_CDROM = "/dev/cdrom"
EjectCDKey = 161
EjectCDKeyDelay = 0
# [MODULE PMAC]
dev_PMU = "/dev/pmu"
dev_ADB = "/dev/adb"
TPModeUpKey = 225 + alt
TPModeDownKey = 224 + alt
TPMode = drag
KBDMode = fkeysfirst
Batlog = none
NoTapTyping = no
Reply to: