Hi all-
Got an Asante 5402-XG wifi card I'm trying to get to work on a Pismo/Linux 2.6.8. Seems like I'm pretty close, but so far no luck. Don't have another machine of any OS to test some things though...
Looks like lspci finds the card and I've added the airport support modules, still no response from ethernet.
The Asante card is a Broadcom chip BCM4306 (rev.2) and I've attached some relevant pieces on data from my system below.
Thanks in advance for any suggestions!
Best,
Charles
<vze26m98@optonline.net>
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
cturner@vatic:~$ lspci
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
0001:10:17.0 ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:1a.0 CardBus bridge: Texas Instruments PCI1211
0001:11:00.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (
rev 02)
0002:24:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
0002:24:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth FireWire (rev 01)
0002:24:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) (rev 01)
cturner@vatic:~$ dmesg
(omitted...)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Yenta: CardBus bridge found at 0001:10:1a.0 [0000:0000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0001:10:1a.0, mfunc 0x00000002, devctl 0x60
Yenta: ISA IRQ mask 0x0000, PCI irq 58
Socket status: 30000068
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048]
ohci1394: fw-host0: SelfID received outside of bus reset sequence
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
divert: allocating divert_blk for eth0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:30:65:7c:5d:de
PHY ID: 406212, addr: 0
eth0: Found BCM5201 PHY
ieee1394: Host added: ID:BUS[0-00:1023] GUID[003065fffe7c5dde]
ieee1394: got invalid ack 252 from node 65535 (tcode 0)
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
divert: not allocating divert_blk for non-ethernet device eth1
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ide-floppy driver 0.99.newide
hdc: No disk in drive
hdc: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
NET: Registered protocol family 17
cturner@vatic:~$ lsmod
Module Size Used by
af_packet 21352 1
ide_floppy 23584 0
eth1394 25480 0
sungem 36836 0
crc32 4832 1 sungem
sungem_phy 10240 1 sungem
ohci1394 41924 0
yenta_socket 23616 1
pcmcia_core 76788 1 yenta_socket
tsdev 8640 0
joydev 12000 0
evdev 11968 0
usbhid 53952 0
ohci_hcd 26212 0
uninorth_agp 8544 1
agpgart 42412 1 uninorth_agp
airport 7968 0
orinoco 53620 1 airport
hermes 15104 2 airport,orinoco
snd_usb_audio 85252 0
(omitted...)