Error writing CD-ROM with PowerBook G4
Hi all,
When I'm writing large CD-ROMs the writing process will terminate with
an error before all the data is writen. See the following output below.
Has anyone a suggestion how to fix this? By the way, I'm using the
testing distro.
Thanks,
Pander
# cdrecord -v dev=ATAPI:0,0,0 gracetime=2 -eject -data
Mandrake92-cd1-inst.i586.iso
Cdrecord-Clone 2.01a25 (powerpc-unknown-linux-gnu) Copyright (C)
1995-2004 Jörg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this
version.
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identifikation : 'CD-RW CW-8122 '
Revision : 'BA21'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1714608 = 1674 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 651 MB
Total size: 748 MB (74:10.82) = 333812 sectors
Lout start: 749 MB (74:12/62) = 333812 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 26034
Starting to write CD/DVD at speed 24 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01: 463 of 651 MB written (fifo 98%) [buf 16%]
19.8x.cdrecord.mmap: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 03 9E F9 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
write track data: error after 486000640 bytes
cdrecord.mmap: A write error occured.
cdrecord.mmap: Please properly read the error message above.
Writing time: 297.050s
Average write speed 15.5x.
Min drive buffer fill was 16%
Fixating...
Fixating time: 40.032s
cdrecord.mmap: fifo had 7719 puts and 7656 gets.
cdrecord.mmap: fifo was 0 times empty and 5608 times full, min fill was 20%.
Reply to: