Re: modem kernel 2.4.18-newpmac

[Vincent <vincentl@ifrance.com>]

Ok Benjamin,
hardware was not the trouble but wvdial 

Wvdial 1.53 work fine with kernel 2.2.20-pmac

For kernel 2.4.18-newpmac you must use pppconfig & pon/poff ISP tools

Thanks
Vincent


Le mer 09/07/2003 à 14:42, Benjamin Herrenschmidt a écrit :
> On Tue, 2003-07-08 at 19:53, Vincent wrote:
> > Hi,
> > 
> > I'm using a G3 lombard an woody 3.0r0 
> > Modem works fine with kernel  vmlinux-2.2.20-pmac
> > 
> > But with kernel vmlinux-2.4.18-newpmac modem can not dialout
> > It make ATZ but nothing else
> 
> When you manually use the modem (in minicom for example),
> does it work ?
> 
> What typically happens is that the modem takes about 2 seconds
> to power up, and you get nothing during this time (output is
> even blocked in the driver). The old driver used to block the
> open() call when powering up the modem. This isn't quite what
> should be done, so newer drivers will just block output, however,
> some dialers seem to timeout in that case...
> 
> Ben.
> 
> _____________________________________________________________________
> Envie de discuter en "live" avec vos amis ? Télécharger MSN Messenger
> http://www.ifrance.com/_reloc/m la 1ère messagerie instantanée de France


_____________________________________________________________________
Envie de discuter en "live" avec vos amis ? Télécharger MSN Messenger
http://www.ifrance.com/_reloc/m la 1ère messagerie instantanée de France