Re: airport wireless problems

[emorfin@caracol.red.cinvestav.mx]

i'm using it right now, without any trouble.

$lspci
00:0b.0 Host bridge: Apple Computer Inc.: Unknown device 002d
00:10.0 VGA compatible controller: ATI Technologies Inc: Unknown device 
4c66 (rev 01)
10:0b.0 Host bridge: Apple Computer Inc.: Unknown device 002e
10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
10:1a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus 
Controller (rev 02)
24:0b.0 Host bridge: Apple Computer Inc.: Unknown device 002f
24:0e.0 Class ffff: Lucent Microelectronics: Unknown device 5811 (rev ff)
24:0f.0 Class ffff: Apple Computer Inc. UniNorth GMAC (rev ff)

$dmesg |grep airport
airport.c 0.13d (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
airport: card registered for interface eth1


On Thu, 3 Jul 2003, Jamie Wilkinson wrote:

> This one time, at band camp, Jamie Wilkinson wrote:
> >eth1: Unknown information frame received (type f202).
> 
> I'm getting this message about 8 times a minute from all the APs I've tried
> to connect to.
> 
> Please, if anyone is using their builtin airport card using 2.4.21-ben2
> say so, so I have some datapoints to compare to.  lspci and dmesg output
> when the module is loaded would be useful too.
> 
>