Re: PCMCIA (was: Re: BenH TiBook kernels @ debian.jones.dk)
On 07 Aug 2001 21:45:48 +0200, Michel Lanners wrote:
> For me PCMCIA works without problems (AFAICT; only old-style 16-bit
> PCMCIA tested so far) with BenH's kernels; however don't forget to adapt
> the resource ranges available to PCMCIA in /etc/pcmcia/config.opts:
>
> # PowerPC ioports and memory:
> include port 0x1000-0x10ff, port 0x1400-0x14ff
> include memory 0x80400000-0x807ff000, memory 0xf3000000-0xf33ff000
>
> Remove the default ranges. Above is for my TiBook.
>
> For other machines, get these ranges out of a lspci listing.
Are you using pcmcia-cs or the stuff in the kernel? I have a pcmcia
Smartmedia flash card reader, and it used to work once with ide_cs
module. But now it doesnt seem to.. And since gphoto2 works with my
camera over usb, I havent been trying too hard to get it working, but it
might be nice if it did work.
Tuomas
--
:: :: Tuomas Kuosmanen :: Art Director, Ximian :: ::
:: :: tigert@ximian.com :: www.ximian.com :: ::
Reply to: