Re: XF4 on Wallstret PBG3
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Thursday 18 January 2001 12:25, you wrote:
> > I've been trying to make XFree4 work on my Powerbook G3. It has ATI
> > Mach64 video, and crashes when I start XFree86, and it keeps me in Xpmac
> > all the
>
> Please post the output of lspci -vv here. Are there any overlaps in the
> address regions of the Mach64?
> If you can use yaboot on the Wallstreet, try booting with yaboot instead
> of BootX.
>
> Michael
I've had a very, very tough time installing yaboot, and quite a long
discussion with Ethan Benson about installing it. We came to the conclusion
that my Wallstreet just SUCKS, and isn't really new-world. I don't really
know if it's new world, old world, or some weird in-between phase. OF is
probably broken, shattered, etc.
Previously, I've tried both OFFB and atyfb, but both cause crashes when I
start XFree86. Here's my lspci output:
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort+
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0, cache line size 08
00:0d.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Region 0: Memory at f4000000 (32-bit, non-prefetchable)
00:10.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Region 0: Memory at f3000000 (32-bit, non-prefetchable)
00:11.0 Display controller: ATI Technologies Inc 3D Rage LT Pro (rev dc)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 24
Region 0: Memory at 82000000 (32-bit, non-prefetchable)
Region 1: I/O ports at 0400 [disabled]
Region 2: Memory at 82fff000 (32-bit, non-prefetchable)
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 81803000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=01, subordinate=04, sec-latency=0
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite-
16-bit legacy interface ports at 0001
00:13.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 23
Region 0: Memory at 81802000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=06, subordinate=09, sec-latency=0
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite-
16-bit legacy interface ports at 0001
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.4 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iEYEARECAAYFAjpmtjkACgkQfHpI7Pnqk4XIvACeM3UY7wSDlBbsRoQ3A+BDHsLk
zpwAn0sZYibaRSPGREgszetAITG6kkKw
=D1qr
-----END PGP SIGNATURE-----
Reply to: