Boot Messages and some questions
Hi there,
I've got some questions concerning my bootup, I inserted them in
(-------)
------------------------------------------------------------------------
Jan 18 09:43:08 bull1 syslogd 1.3-3#33.1: restart.
Jan 18 09:43:08 bull1 kernel: klogd 1.3-3#33.1, log source = /proc/kmsg
started.
Jan 18 09:43:08 bull1 kernel: Inspecting /boot/System.map-2.2.12
Jan 18 09:43:08 bull1 kernel: Loaded 9988 symbols from
/boot/System.map-2.2.12.
Jan 18 09:43:08 bull1 kernel: Symbols match kernel version 2.2.12.
Jan 18 09:43:08 bull1 kernel: Loaded 20 symbols from 3 modules.
Jan 18 09:43:08 bull1 kernel: PReP architecture
Jan 18 09:43:08 bull1 kernel: Total memory = 64MB; using 256kB for hash
table (at c0280000)
Jan 18 09:43:08 bull1 kernel: Linux version 2.2.12 (root@bull1) (gcc
version 2.95.2 20000220 (Debian GNU/Linux)) #1 Wed Jan
17
00:19:33 CET 2001
Jan 18 09:43:08 bull1 kernel: Boot arguments: root=/dev/sda2
Jan 18 09:43:08 bull1 kernel: time_init: decrementer frequency =
999432960/60 (15MHz)
Jan 18 09:43:08 bull1 kernel: Console: colour VGA+ 80x25
Jan 18 09:43:08 bull1 kernel: Calibrating delay loop... 332.60 BogoMIPS
Jan 18 09:43:08 bull1 kernel: Memory: 62168k available (1536k kernel
code, 1696k data, 136k init) [c0000000,c4000000]
Jan 18 09:43:08 bull1 kernel: POSIX conformance testing by UNIFIX
Jan 18 09:43:08 bull1 kernel: PCI: Probing PCI hardware
Jan 18 09:43:08 bull1 kernel: Setting PCI interrupts for a "Utah
(Powerstack II Pro4000)"
Jan 18 09:43:08 bull1 kernel: Linux NET4.0 for Linux 2.2
Jan 18 09:43:08 bull1 kernel: Based upon Swansea University Computer
Society NET3.039
Jan 18 09:43:08 bull1 kernel: NET4: Unix domain sockets 1.0 for Linux
NET4.0.
Jan 18 09:43:08 bull1 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan 18 09:43:08 bull1 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jan 18 09:43:08 bull1 kernel: Starting kswapd v 1.5
Jan 18 09:43:08 bull1 kernel: Detected PS/2 Mouse Port.
------------
?? I'have included Ps/2 mouse support in the kernel, but no mouse
------------
Jan 18 09:43:08 bull1 kernel: PowerMac Z8530 serial driver version 1.01
Jan 18 09:43:08 bull1 kernel: pty: 256 Unix98 ptys configured
Jan 18 09:43:08 bull1 kernel: Macintosh non-volatile memory driver v1.0
Jan 18 09:43:08 bull1 kernel: RAM disk driver initialized: 16 RAM
disks of 4096K size
Jan 18 09:43:08 bull1 kernel: loop: registered device at major 7
Jan 18 09:43:08 bull1 kernel: Floppy drive(s): fd0 is 2.88M
Jan 18 09:43:08 bull1 kernel: FDC 0 is a National Semiconductor PC87306
Jan 18 09:43:08 bull1 kernel: sym53c8xx: at PCI bus 0, device 12,
function 0
Jan 18 09:43:08 bull1 kernel: sym53c8xx: setting PCI_COMMAND_IO
PCI_COMMAND_MEMORY...
Jan 18 09:43:08 bull1 kernel: sym53c8xx: setting PCI_COMMAND_MASTER
PCI_COMMAND_PARITY...(fix-up)
Jan 18 09:43:08 bull1 kernel: sym53c8xx: 53c825a detected
Jan 18 09:43:08 bull1 kernel: sym53c825a-0: rev=0x11, base=0x2008000,
io_port=0x1400, irq=15
Jan 18 09:43:08 bull1 kernel: sym53c825a-0: ID 7, Fast-10, Parity
Checking
Jan 18 09:43:08 bull1 kernel: sym53c825a-0: on-chip RAM at 0x2009000
Jan 18 09:43:08 bull1 kernel: sym53c825a-0: restart (scsi reset).
Jan 18 09:43:08 bull1 kernel: sym53c825a-0: Downloading SCSI SCRIPTS.
Jan 18 09:43:08 bull1 kernel: scsi0 : sym53c8xx - version 1.3g
Jan 18 09:43:08 bull1 kernel: scsi : 1 host.
Jan 18 09:43:08 bull1 kernel: Vendor: SEAGATE Model:
ST32151W Rev: 0526
Jan 18 09:43:08 bull1 kernel: Type:
Direct-Access ANSI SCSI revision: 02
Jan 18 09:43:08 bull1 kernel: Detected scsi disk sda at scsi0, channel
0, id 0, lun 0
Jan 18 09:43:08 bull1 kernel: Vendor: SEAGATE Model:
ST32151W Rev: 0526
Jan 18 09:43:08 bull1 kernel: Type:
Direct-Access ANSI SCSI revision: 02
Jan 18 09:43:08 bull1 kernel: Detected scsi disk sdb at scsi0, channel
0, id 1, lun 0
Jan 18 09:43:08 bull1 kernel: Vendor: HP Model:
C1533A Rev: A612
Jan 18 09:43:08 bull1 kernel: Type:
Sequential-Access ANSI SCSI revision: 02
Jan 18 09:43:08 bull1 kernel: Detected scsi tape st0 at scsi0, channel
0, id 4, lun 0
Jan 18 09:43:08 bull1 kernel: Vendor: MATSHITA Model: CD-ROM
CR-506 Rev: 8S04
Jan 18 09:43:08 bull1 kernel: Type:
CD-ROM ANSI SCSI revision: 02
Jan 18 09:43:08 bull1 kernel: Detected scsi CD-ROM sr0 at scsi0,
channel 0, id 5, lun 0
Jan 18 09:43:08 bull1 kernel: sym53c825a-0-<0,0>: tagged command queue
depth set to 8
Jan 18 09:43:08 bull1 kernel: sym53c825a-0-<1,0>: tagged command queue
depth set to 8
Jan 18 09:43:08 bull1 kernel: scsi : detected 1 SCSI tape 1 SCSI cdrom
2 SCSI disks total.
Jan 18 09:43:08 bull1 kernel: sym53c825a-0-<5,*>: FAST-5 SCSI 5.0 MB/s
(200 ns, offset 8)
Jan 18 09:43:08 bull1 kernel: Uniform CDROM driver Revision: 2.55
Jan 18 09:43:08 bull1 kernel: sym53c825a-0-<0,*>: FAST-10 WIDE SCSI
20.0 MB/s (100 ns, offset 8)
Jan 18 09:43:08 bull1 kernel: SCSI device sda: hdwr sector= 512 bytes.
Sectors= 4197405 [2049 MB] [2.0 GB]
Jan 18 09:43:08 bull1 kernel: sym53c825a-0-<1,*>: FAST-10 WIDE SCSI
20.0 MB/s (100 ns, offset 8)
Jan 18 09:43:08 bull1 kernel: SCSI device sdb: hdwr sector= 512 bytes.
Sectors= 4197405 [2049 MB] [2.0 GB]
Jan 18 09:43:08 bull1 kernel: PPP: version 2.3.7 (demand dialling)
Jan 18 09:43:08 bull1 kernel: TCP compression code copyright 1989
Regents of the University of California
Jan 18 09:43:08 bull1 kernel: PPP line discipline registered.
Jan 18 09:43:08 bull1 kernel: pcnet32.c: PCI bios is present, checking
for devices...
Jan 18 09:43:08 bull1 kernel: eth0: DC21140 at 0x1800 (PCI bus 0,
device 14), h/w address 08:00:3e:25:dc:be,
Jan 18 09:43:08 bull1 kernel: and requires IRQ11 (provided by PCI
BIOS).
Jan 18 09:43:08 bull1 kernel: de4x5.c:V0.544 1999/5/8
davies@maniac.ultranet.com
Jan 18 09:43:08 bull1 kernel: Partition check:
Jan 18 09:43:08 bull1 kernel: sda: sda1 sda2
Jan 18 09:43:08 bull1 kernel: sdb: sdb1 sdb2 sdb3 < sdb5 >
Jan 18 09:43:08 bull1 kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Jan 18 09:43:08 bull1 kernel: Freeing unused kernel memory: 136k init
12k pmac 12k open firmware
Jan 18 09:43:08 bull1 kernel: Adding Swap: 145380k swap-space (priority
-1)
Jan 18 09:43:08 bull1 kernel: ne2k-pci.c:vpre-1.00e 5/27/99 D.
Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Jan 18 09:43:08 bull1 kernel: The PCI BIOS has not enabled this NE2k
clone! Updating PCI command 0000->0001.
-------------
?? Does this mean I've goto to update the open firmware and how does
that work?
-------------
Jan 18 09:43:08 bull1 kernel: ne2k-pci.c: PCI NE2000 clone 'RealTek
RTL-8029' at I/O 0x1000, IRQ 11.
Jan 18 09:43:08 bull1 kernel: eth1: RealTek RTL-8029 found at 0x1000,
IRQ 11, 00:C0:DF:E4:FB:6F.
Jan 18 09:43:08 bull1 kernel: Serial driver version 4.27 with no serial
options enabled
Jan 18 09:43:08 bull1 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Jan 18 09:43:08 bull1 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Jan 18 09:43:12 bull1 kernel: eth0: media is TP.
Jan 18 09:43:19 bull1 kernel: registered device ppp0
Jan 18 09:43:19 bull1 pppd[240]: pppd 2.3.11 started by root, uid 0
Jan 18 09:43:19 bull1 pppd[240]: Using interface ppp0
Jan 18 09:43:19 bull1 pppd[240]: Connect: ppp0 <--> /dev/pts/0
Jan 18 09:43:23 bull1 kernel: PPP BSD Compression module registered
Jan 18 09:43:23 bull1 kernel: PPP Deflate Compression module registered
Jan 18 09:43:23 bull1 pppd[240]: local IP address 10.195.77.35
Jan 18 09:43:23 bull1 pppd[240]: remote IP address 195.190.241.73
Jan 18 09:43:23 bull1 pppd[240]: primary DNS address 10.128.1.7
Jan 18 09:43:23 bull1 pppd[240]: secondary DNS address 10.128.1.39
Reply to: