Re: Configuring XF4 for Lombard (works with accel!)

To: steven alyari <salyari@midway.uchicago.edu>
Cc: debian-powerpc@lists.debian.org, sb@dcs.qmw.ac.uk
Subject: Re: Configuring XF4 for Lombard (works with accel!)
From: Sergio Brandano <sb@dcs.qmw.ac.uk>
Date: Wed, 20 Dec 2000 14:22:58 +0000
Message-id: <200012201422.OAA05499@copper.dcs.qmw.ac.uk>
In-reply-to: Message from steven alyari <salyari@midway.uchicago.edu> of "Fri, 15 Dec 2000 21:37:40 CST." <20001215213740.A19172@harper.uchicago.edu>
References: <3A37D019.33DCFE1C@dcs.qmw.ac.uk> <3A38058B.6BC626E0@iiic.ethz.ch> <3A380AC3.11921DB2@hadess.net> <8766knhemk.fsf@amadeus.jasonstewart.net> <20001214050318.A13519@harper.uchicago.edu> <3A38DFDC.2145EC8B@relog.ch> <20001215020016.A288@harper.uchicago.edu> <3A3A45DC.6C9C723C@relog.ch> <20001215213740.A19172@harper.uchicago.edu>

 Great news! It is unfortunate that the new binaries
 (4.0.1pre2.RC4) do not yet implement the patch.
 I've tried them, but the ati driver still does not
 work.

 Sergio

Reply to:

References:
- Re: Configuring XF4 for Lombard
  - From: Sergio Brandano <sb@dcs.qmw.ac.uk>
- Re: Configuring XF4 for Lombard
  - From: Michel Dänzer <michdaen@iiic.ethz.ch>
- Re: Configuring XF4 for Lombard
  - From: Bastien Nocera <hadess@hadess.net>
- Re: Configuring XF4 for Lombard
  - From: jasons@cs.unm.edu (Jason E. Stewart)
- Re: Configuring XF4 for Lombard
  - From: steven alyari <salyari@midway.uchicago.edu>
- Re: Configuring XF4 for Lombard
  - From: Michel Dänzer <daenzer@relog.ch>
- Re: Configuring XF4 for Lombard
  - From: steven alyari <salyari@midway.uchicago.edu>
- Re: Configuring XF4 for Lombard
  - From: Michel Dänzer <daenzer@relog.ch>
- Re: Configuring XF4 for Lombard (works with accel!)
  - From: steven alyari <salyari@midway.uchicago.edu>

Prev by Date: Re: [help] mesh - target 0 aborted
Next by Date: Re: Print Configuration and the Epson Stylus Photo 750
Previous by thread: Re: Configuring XF4 for Lombard (works with accel!)
Next by thread: Re: Configuring XF4 for Lombard
Index(es):
- Date
- Thread