Dear MIPS porters, DSA would like to upgrade the remaining mips*el buildds to bullseye (and later to bookworm), however we have trouble running the Bullseye or Bookworm kernel on the LS3A-RS780-1w ones. Both Bullseye and Bookworm kernels boot fine up to the userland, but the network card does not work. It *seems* to an interrupt issue as the corresponding counter in /proc/interrupts does not change, and in addition the kernel logs show the following warnings: [ 5.077846] pcieport 0000:00:02.0: of_irq_parse_pci: failed with rc=-22 [ 5.084744] pcieport 0000:00:03.0: of_irq_parse_pci: failed with rc=-22 [ 5.170772] ahci 0000:00:11.0: of_irq_parse_pci: failed with rc=-22 [ 7.376554] pci 0000:00:07.0: of_irq_parse_pci: failed with rc=-22 [ 7.444769] ata_generic 0000:00:14.1: of_irq_parse_pci: failed with rc=-22 [ 7.495993] ehci-pci 0000:00:12.2: of_irq_parse_pci: failed with rc=-22 [ 7.624868] ehci-pci 0000:00:13.2: of_irq_parse_pci: failed with rc=-22 [ 7.753230] ohci-pci 0000:00:12.0: of_irq_parse_pci: failed with rc=-22 [ 7.886362] ohci-pci 0000:00:12.1: of_irq_parse_pci: failed with rc=-22 [ 8.018045] ohci-pci 0000:00:13.0: of_irq_parse_pci: failed with rc=-22 [ 8.150168] ohci-pci 0000:00:13.1: of_irq_parse_pci: failed with rc=-22 [ 8.294391] ohci-pci 0000:00:14.5: of_irq_parse_pci: failed with rc=-22 [ 18.398222] snd_hda_intel 0000:00:14.2: of_irq_parse_pci: failed with rc=-22 [ 18.547932] pci 0000:00:01.0: of_irq_parse_pci: failed with rc=-22 Any idea how to solve this issue? I have attached a full 6.1 kernel boot log for reference. Thanks, Aurelien -- Aurelien Jarno GPG: 4096R/1DDD8C9B aurelien@aurel32.net http://aurel32.net
Linux version 6.1.0-0.deb11.5-loongson-3 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Debian 6.1.12-1~bpo11+1 (2023-03-05) CpuClock = 900000000 The bridge chip is RS780E or SR5690 CP0_Config3: CP0 16.3 (0xa0) CP0_PageGrain: CP0 5.1 (0x20000000) NUMA: Discovered 4 cpus on 1 nodes Node0: mem_type:1, mem_start:0x200000, mem_size:0xee MB start_pfn:0x80, end_pfn:0x3c00, num_physpages:0x3b80 Node0: mem_type:2, mem_start:0x90000000, mem_size:0x6e0 MB start_pfn:0x24000, end_pfn:0x3f800, num_physpages:0x1f380 Node0: mem_type:2, mem_start:0x100000000, mem_size:0x1800 MB start_pfn:0x40000, end_pfn:0xa0000, num_physpages:0x7f380 Node0's addrspace_offset is 0x0 Node0: start_pfn=0x80, end_pfn=0xa0000 NUMA: set cpumask cpu 0 on node 0 NUMA: set cpumask cpu 1 on node 0 NUMA: set cpumask cpu 2 on node 0 NUMA: set cpumask cpu 3 on node 0 printk: bootconsole [early0] enabled CPU0 revision is: 00006305 (ICT Loongson-3) FPU revision is: 00770501 MIPS: machine is loongson,loongson64c-4core-rs780e Initial ramdisk at: 0x9800000004000000 (30712541 bytes) software IO TLB: area num 1. software IO TLB: mapped [mem 0x0000000005d4c000-0x0000000009d4c000] (64MB) SMBIOS 2.6 present. DMI: Loongson Loongson-3A5-780E-1w-V1.1-demo/Loongson-3A5-780E-1w-V1.1-demo, BIOS Loongson-PMON-V3.3-20141015 10/15/2014 Detected 4 available CPU(s) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes Unified victim cache 0kB direct mapped, linesize 0 bytes. Unified secondary cache 4096kB 4-way, linesize 32 bytes. Zone ranges: DMA32 [mem 0x0000000000200000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000027fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000200000-0x000000000effffff] node 0: [mem 0x0000000090000000-0x00000000fdffffff] node 0: [mem 0x0000000100000000-0x000000027fffffff] Initmem setup node 0 [mem 0x0000000000200000-0x000000027fffffff] On node 0, zone DMA32: 128 pages in unavailable ranges On node 0, zone DMA32: 1024 pages in unavailable ranges On node 0, zone Normal: 2048 pages in unavailable ranges percpu: Embedded 13 pages/cpu s170800 r8192 d34000 u212992 pcpu-alloc: s170800 r8192 d34000 u212992 alloc=13*16384 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Fallback order for Node 0: 0 Built 1 zonelists, mobility grouping on. Total pages: 519052 Policy zone: Normal Kernel command line: console=ttyS0,115200n8 root=/dev/md0 rootwait machtype=loongson-ls3a-rs780e-1w rd_start=0x84000000 rd_size=0x1d4a2dd Unknown kernel command line parameters "machtype=loongson-ls3a-rs780e-1w", will be passed to user space. Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) mem auto-init: stack:off, heap alloc:on, heap free:off Memory: 2179040K/8337408K available (11120K kernel code, 1771K rwdata, 3064K rodata, 2704K init, 548K bss, 161872K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 ftrace: allocating 32056 entries in 32 pages ftrace: allocated 32 pages with 1 groups trace event string verifier disabled rcu: Preemptible hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. Trampoline variant of Tasks RCU enabled. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 320 ISA Bridge: /bus@10000000/isa@18000000 IO 0x0000000018000000..0x0000000018003fff -> 0x0000000000000000 rcu: srcu_init: Setting srcu_struct sizes based on contention. clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4247245437 ns sched_clock: 32 bits at 450MHz, resolution 2ns, wraps every 4772186110ns Console: colour dummy device 80x25 Calibrating delay loop... 718.84 BogoMIPS (lpj=1437696) pid_max: default: 32768 minimum: 301 LSM: Security Framework initializing landlock: Up and running. Yama: disabled by default; enable with sysctl kernel.yama.* AppArmor: AppArmor initialized TOMOYO Linux initialized LSM support for eBPF active Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear) cblist_init_generic: Setting adjustable number of callback queues. cblist_init_generic: Setting shift to 2 and lim to 1. cblist_init_generic: Setting shift to 2 and lim to 1. cblist_init_generic: Setting shift to 2 and lim to 1. Performance counters: No available PMU. rcu: Hierarchical SRCU implementation. rcu: Max phase no-delay instances is 1000. smp: Bringing up secondary CPUs ... Booting CPU#1... Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes Unified victim cache 0kB direct mapped, linesize 0 bytes. Unified secondary cache 4096kB 4-way, linesize 32 bytes. CPU1 revision is: 00006305 (ICT Loongson-3) FPU revision is: 00770501 CPU#1 finished, CP0_ST=d400cce1 Booting CPU#2... Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes Unified victim cache 0kB direct mapped, linesize 0 bytes. Unified secondary cache 4096kB 4-way, linesize 32 bytes. CPU2 revision is: 00006305 (ICT Loongson-3) FPU revision is: 00770501 CPU#2 finished, CP0_ST=d400cce1 Booting CPU#3... Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes Unified victim cache 0kB direct mapped, linesize 0 bytes. Unified secondary cache 4096kB 4-way, linesize 32 bytes. CPU3 revision is: 00006305 (ICT Loongson-3) FPU revision is: 00770501 CPU#3 finished, CP0_ST=d400cce1 smp: Brought up 1 node, 4 CPUs node 0 deferred pages initialised in 116ms devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 2, 65536 bytes, linear) NET: Registered PF_NETLINK/PF_ROUTE protocol family audit: initializing netlink subsys (disabled) audit: type=2000 audit(0.484:1): state=initialized audit_enabled=0 res=1 thermal_sys: Registered thermal governor 'fair_share' thermal_sys: Registered thermal governor 'bang_bang' thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'user_space' cpuidle: using governor ladder cpuidle: using governor menu HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: strict mode SCSI subsystem initialized libata version 3.00 loaded. NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO NetLabel: unlabeled traffic allowed by default vgaarb: loaded clocksource: Switched to clocksource MIPS VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) AppArmor: AppArmor Filesystem Enabled NET: Registered PF_INET protocol family IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear) tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear) Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear) TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear) TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear) TCP: Hash tables configured (established 65536 bind 65536) MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear) UDP hash table entries: 4096 (order: 3, 131072 bytes, linear) UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family NET: Registered PF_XDP protocol family PCI: CLS 0 bytes, default 32 Trying to unpack rootfs image as initramfs... Initialise system trusted keyrings Key type blacklist registered workingset: timestamp_bits=40 max_order=19 bucket_order=0 zbud: loaded integrity: Platform Keyring initialized Key type asymmetric registered Asymmetric key parser 'x509' registered Freeing initrd memory: 29984K process '/usr/bin/kmod' started with executable stack alg: self-tests for CTR-KDF (hmac(sha256)) passed Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler mq-deadline registered loongson-pci 1a000000.pci: host bridge /bus@10000000/pci@1a000000 ranges: loongson-pci 1a000000.pci: No bus range found for /bus@10000000/pci@1a000000, using [bus 00-ff] loongson-pci 1a000000.pci: IO 0x0018004000..0x001800ffff -> 0x0000004000 loongson-pci 1a000000.pci: MEM 0x0040000000..0x007fffffff -> 0x0040000000 loongson-pci 1a000000.pci: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x4000-0xffff] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits pci 0000:00:01.0: [1022:9602] type 01 class 0x060400 pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 pci 0000:00:02.0: enabling Extended Tags pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: [1022:960b] type 01 class 0x060400 pci 0000:00:03.0: enabling Extended Tags pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 pci 0000:00:04.0: enabling Extended Tags pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1022:9605] type 01 class 0x060400 pci 0000:00:05.0: enabling Extended Tags pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 pci 0000:00:06.0: enabling Extended Tags pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: [1022:9607] type 01 class 0x060400 pci 0000:00:07.0: enabling Extended Tags pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 pci 0000:00:09.0: enabling Extended Tags pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 pci 0000:00:0a.0: enabling Extended Tags pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:11.0: [1002:4390] type 00 class 0x010601 pci 0000:00:11.0: reg 0x10: [io 0xe058-0xe05f] pci 0000:00:11.0: reg 0x14: [io 0xe050-0xe053] pci 0000:00:11.0: reg 0x18: [io 0xe048-0xe04f] pci 0000:00:11.0: reg 0x1c: [io 0xe040-0xe043] pci 0000:00:11.0: reg 0x20: [io 0xe010-0xe01f] pci 0000:00:11.0: reg 0x24: [mem 0x48a09000-0x48a093ff] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 pci 0000:00:12.0: reg 0x10: [mem 0x48a08000-0x48a08fff] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 pci 0000:00:12.1: reg 0x10: [mem 0x48a07000-0x48a07fff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 pci 0000:00:12.2: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 pci 0000:00:13.0: reg 0x10: [mem 0x48a06000-0x48a06fff] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 pci 0000:00:13.1: reg 0x10: [mem 0x48a05000-0x48a05fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 pci 0000:00:13.2: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a pci 0000:00:14.1: reg 0x10: [io 0xe038-0xe03f] pci 0000:00:14.1: reg 0x14: [io 0xe030-0xe033] pci 0000:00:14.1: reg 0x18: [io 0xe028-0xe02f] pci 0000:00:14.1: reg 0x1c: [io 0xe020-0xe023] pci 0000:00:14.1: reg 0x20: [io 0xe000-0xe00f] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 0x10: [mem 0x48a00000-0x48a03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 pci 0000:00:14.5: reg 0x10: [mem 0x48a04000-0x48a04fff] pci_bus 0000:01: extended config space not accessible pci 0000:01:05.0: [1002:9615] type 00 class 0x030000 pci_bus 0000:01: 2-byte config write to 0000:01:05.0 offset 0x4 may corrupt adjacent RW1C bits pci 0000:01:05.0: reg 0x10: [mem 0x40000000-0x47ffffff pref] pci 0000:01:05.0: reg 0x14: [io 0xd000-0xd0ff] pci 0000:01:05.0: reg 0x18: [mem 0x48000000-0x4800ffff] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x0f127950-0x0f16794f] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.0: vgaarb: setting as boot VGA device pci 0000:01:05.0: vgaarb: bridge control possible pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:00:01.0: PCI bridge to [bus 01-ff] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] pci 0000:00:01.0: bridge window [mem 0x40000000-0x480fffff] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 pci 0000:00:02.0: PCI bridge to [bus 02-ff] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] pci 0000:00:02.0: bridge window [mem 0x48900000-0x489fffff] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 pci 0000:00:03.0: PCI bridge to [bus 03-ff] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] pci 0000:00:03.0: bridge window [mem 0x48800000-0x488fffff] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03 pci 0000:00:04.0: PCI bridge to [bus 04-ff] pci 0000:00:04.0: bridge window [io 0xa000-0xafff] pci 0000:00:04.0: bridge window [mem 0x48700000-0x487fffff] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04 pci 0000:00:05.0: PCI bridge to [bus 05-ff] pci 0000:00:05.0: bridge window [io 0x9000-0x9fff] pci 0000:00:05.0: bridge window [mem 0x48600000-0x486fffff] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05 pci 0000:00:06.0: PCI bridge to [bus 06-ff] pci 0000:00:06.0: bridge window [io 0x8000-0x8fff] pci 0000:00:06.0: bridge window [mem 0x48500000-0x485fffff] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06 pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 pci_bus 0000:07: 2-byte config write to 0000:07:00.0 offset 0x4 may corrupt adjacent RW1C bits pci 0000:07:00.0: reg 0x10: [io 0x7000-0x70ff] pci 0000:07:00.0: reg 0x18: [mem 0x48414000-0x48414fff 64bit pref] pci 0000:07:00.0: reg 0x20: [mem 0x48410000-0x48413fff 64bit pref] pci 0000:07:00.0: reg 0x30: [mem 0x48400000-0x4840ffff pref] pci 0000:07:00.0: supports D1 D2 pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:07.0: PCI bridge to [bus 07-ff] pci 0000:00:07.0: bridge window [io 0x7000-0x7fff] pci 0000:00:07.0: bridge window [mem 0x48400000-0x484fffff] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07 pci 0000:00:09.0: PCI bridge to [bus 08-ff] pci 0000:00:09.0: bridge window [io 0x6000-0x6fff] pci 0000:00:09.0: bridge window [mem 0x48300000-0x483fffff] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08 pci 0000:00:0a.0: PCI bridge to [bus 09-ff] pci 0000:00:0a.0: bridge window [io 0x5000-0x5fff] pci 0000:00:0a.0: bridge window [mem 0x48200000-0x482fffff] pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 09 pci_bus 0000:0a: extended config space not accessible pci 0000:00:14.4: PCI bridge to [bus 0a-ff] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x4000-0x4fff] pci 0000:00:14.4: bridge window [mem 0x48100000-0x481fffff] pci 0000:00:14.4: bridge window [io 0x4000-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x40000000-0x7fffffff] (subtractive decode) pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0a pci 0000:00:01.0: BAR 14: assigned [mem 0x40000000-0x4bffffff] pci 0000:00:02.0: BAR 14: assigned [mem 0x4c000000-0x4c0fffff] pci 0000:00:03.0: BAR 14: assigned [mem 0x4c100000-0x4c1fffff] pci 0000:00:04.0: BAR 14: assigned [mem 0x4c200000-0x4c2fffff] pci 0000:00:05.0: BAR 14: assigned [mem 0x4c300000-0x4c3fffff] pci 0000:00:06.0: BAR 14: assigned [mem 0x4c400000-0x4c4fffff] pci 0000:00:07.0: BAR 14: assigned [mem 0x4c500000-0x4c5fffff] pci 0000:00:07.0: BAR 15: assigned [mem 0x4c600000-0x4c6fffff 64bit pref] pci 0000:00:09.0: BAR 14: assigned [mem 0x4c700000-0x4c7fffff] pci 0000:00:0a.0: BAR 14: assigned [mem 0x4c800000-0x4c8fffff] pci 0000:00:14.4: BAR 14: assigned [mem 0x4c900000-0x4c9fffff] pci 0000:00:14.2: BAR 0: assigned [mem 0x4ca00000-0x4ca03fff 64bit] pci 0000:00:01.0: BAR 13: assigned [io 0x4000-0x4fff] pci 0000:00:02.0: BAR 13: assigned [io 0x5000-0x5fff] pci 0000:00:03.0: BAR 13: assigned [io 0x6000-0x6fff] pci 0000:00:04.0: BAR 13: assigned [io 0x7000-0x7fff] pci 0000:00:05.0: BAR 13: assigned [io 0x8000-0x8fff] pci 0000:00:06.0: BAR 13: assigned [io 0x9000-0x9fff] pci 0000:00:07.0: BAR 13: assigned [io 0xa000-0xafff] pci 0000:00:09.0: BAR 13: assigned [io 0xb000-0xbfff] pci 0000:00:0a.0: BAR 13: assigned [io 0xc000-0xcfff] pci 0000:00:12.0: BAR 0: assigned [mem 0x4ca04000-0x4ca04fff] pci 0000:00:12.1: BAR 0: assigned [mem 0x4ca05000-0x4ca05fff] pci 0000:00:13.0: BAR 0: assigned [mem 0x4ca06000-0x4ca06fff] pci 0000:00:13.1: BAR 0: assigned [mem 0x4ca07000-0x4ca07fff] pci 0000:00:14.4: BAR 13: assigned [io 0xd000-0xdfff] pci 0000:00:14.5: BAR 0: assigned [mem 0x4ca08000-0x4ca08fff] pci 0000:00:11.0: BAR 5: assigned [mem 0x4ca09000-0x4ca093ff] pci 0000:00:12.2: BAR 0: assigned [mem 0x4ca09400-0x4ca094ff] pci 0000:00:13.2: BAR 0: assigned [mem 0x4ca09500-0x4ca095ff] pci 0000:00:11.0: BAR 4: assigned [io 0xe000-0xe00f] pci 0000:00:14.1: BAR 4: assigned [io 0xe010-0xe01f] pci 0000:00:11.0: BAR 0: assigned [io 0xe020-0xe027] pci 0000:00:11.0: BAR 2: assigned [io 0xe028-0xe02f] pci 0000:00:11.0: BAR 1: assigned [io 0xe030-0xe033] pci 0000:00:11.0: BAR 3: assigned [io 0xe034-0xe037] pci 0000:01:05.0: BAR 0: assigned [mem 0x40000000-0x47ffffff pref] pci 0000:01:05.0: BAR 2: assigned [mem 0x48000000-0x4800ffff] pci 0000:01:05.0: BAR 1: assigned [io 0x4000-0x40ff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0x40000000-0x4bffffff] pci 0000:00:02.0: PCI bridge to [bus 02] pci 0000:00:02.0: bridge window [io 0x5000-0x5fff] pci 0000:00:02.0: bridge window [mem 0x4c000000-0x4c0fffff] pci 0000:00:03.0: PCI bridge to [bus 03] pci 0000:00:03.0: bridge window [io 0x6000-0x6fff] pci 0000:00:03.0: bridge window [mem 0x4c100000-0x4c1fffff] pci 0000:00:04.0: PCI bridge to [bus 04] pci 0000:00:04.0: bridge window [io 0x7000-0x7fff] pci 0000:00:04.0: bridge window [mem 0x4c200000-0x4c2fffff] pci 0000:00:05.0: PCI bridge to [bus 05] pci 0000:00:05.0: bridge window [io 0x8000-0x8fff] pci 0000:00:05.0: bridge window [mem 0x4c300000-0x4c3fffff] pci 0000:00:06.0: PCI bridge to [bus 06] pci 0000:00:06.0: bridge window [io 0x9000-0x9fff] pci 0000:00:06.0: bridge window [mem 0x4c400000-0x4c4fffff] pci 0000:07:00.0: BAR 6: assigned [mem 0x4c500000-0x4c50ffff pref] pci 0000:07:00.0: BAR 4: assigned [mem 0x4c600000-0x4c603fff 64bit pref] pci 0000:07:00.0: BAR 2: assigned [mem 0x4c604000-0x4c604fff 64bit pref] pci 0000:07:00.0: BAR 0: assigned [io 0xa000-0xa0ff] pci 0000:00:07.0: PCI bridge to [bus 07] pci 0000:00:07.0: bridge window [io 0xa000-0xafff] pci 0000:00:07.0: bridge window [mem 0x4c500000-0x4c5fffff] pci 0000:00:07.0: bridge window [mem 0x4c600000-0x4c6fffff 64bit pref] pci 0000:00:09.0: PCI bridge to [bus 08] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] pci 0000:00:09.0: bridge window [mem 0x4c700000-0x4c7fffff] pci 0000:00:0a.0: PCI bridge to [bus 09] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] pci 0000:00:0a.0: bridge window [mem 0x4c800000-0x4c8fffff] pci 0000:00:14.4: PCI bridge to [bus 0a] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] pci 0000:00:14.4: bridge window [mem 0x4c900000-0x4c9fffff] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled pcieport 0000:00:02.0: of_irq_parse_pci: failed with rc=-22 pcieport 0000:00:03.0: of_irq_parse_pci: failed with rc=-22 pci 0000:00:12.0: enabling device (0140 -> 0142) pci 0000:00:12.1: enabling device (0140 -> 0142) pci 0000:00:12.2: enabling device (0000 -> 0002) pci 0000:00:13.0: enabling device (0140 -> 0142) pci 0000:00:13.1: enabling device (0140 -> 0142) pci 0000:00:13.2: enabling device (0000 -> 0002) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled printk: console [ttyS0] disabled 1fe001e0.serial: ttyS0 at MMIO 0x1fe001e0 (irq = 28, base_baud = 2062500) is a 16550A printk: console [ttyS0] enabled printk: bootconsole [early0] disabled ahci 0000:00:11.0: of_irq_parse_pci: failed with rc=-22 ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi host0: ahci scsi host1: ahci scsi host2: ahci scsi host3: ahci ata1: SATA max UDMA/133 abar m1024@0x4ca09000 port 0x4ca09100 irq 4 ata2: SATA max UDMA/133 abar m1024@0x4ca09000 port 0x4ca09180 irq 4 ata3: SATA max UDMA/133 abar m1024@0x4ca09000 port 0x4ca09200 irq 4 ata4: SATA max UDMA/133 abar m1024@0x4ca09000 port 0x4ca09280 irq 4 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 18000070.rtc: registered as rtc0 rtc_cmos 18000070.rtc: setting system clock to 2023-07-15T20:15:00 UTC (1689452100) rtc_cmos 18000070.rtc: alarms up to one day, 242 bytes nvram ledtrig-cpu: registered to indicate activity on CPUs atkbd serio0: keyboard reset failed on isa0060/serio0 Loongson Hwmon Enter... NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 mip6: Mobile IPv6 NET: Registered PF_PACKET protocol family mpls_gso: MPLS GSO support atkbd serio1: keyboard reset failed on isa0060/serio1 registered taskstats version 1 Loading compiled-in X.509 certificates ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD5000AAKX-60U6AA0, 18.01H18, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-6 1H18 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) sd 0:0:0:0: [sda] Write Protect is off ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes ata2.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32) sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) sd 1:0:0:0: [sdb] 4096-byte physical blocks sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' sdb: sdb1 sdb2 sdb3 Problem parsing in-kernel X.509 certificate list sd 1:0:0:0: [sdb] Attached SCSI disk zswap: loaded using pool lzo/zbud Key type .fscrypt registered Key type fscrypt-provisioning registered Key type encrypted registered AppArmor: AppArmor sha1 policy hashing enabled ima: No TPM chip found, activating TPM-bypass! ima: Allocated hash algorithm: sha256 ima: No architecture policies found evm: Initialising EVM extended attributes: evm: security.selinux evm: security.SMACK64 (disabled) evm: security.SMACK64EXEC (disabled) evm: security.SMACK64TRANSMUTE (disabled) evm: security.SMACK64MMAP (disabled) evm: security.apparmor evm: security.ima evm: security.capability evm: HMAC attrs: 0x1 Freeing unused kernel image (initmem) memory: 2704K This architecture does not have kernel memory protection. Run /init as init process with arguments: /init with environment: HOME=/ TERM=linux machtype=loongson-ls3a-rs780e-1w usbcore: registered new interface driver usbfs pci 0000:00:07.0: of_irq_parse_pci: failed with rc=-22 usbcore: registered new interface driver hub usbcore: registered new device driver usb ata_generic 0000:00:14.1: of_irq_parse_pci: failed with rc=-22 ehci-pci 0000:00:12.2: of_irq_parse_pci: failed with rc=-22 ehci-pci 0000:00:12.2: EHCI Host Controller ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci-pci 0000:00:12.2: debug port 1 r8169 0000:07:00.0 eth0: RTL8168d/8111d, 00:23:a0:00:02:df, XID 281, IRQ 5 r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] ehci-pci 0000:00:12.2: irq 6, io mem 0x4ca09400 ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 6.1.0-0.deb11.5-loongson-3 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci-pci 0000:00:13.2: of_irq_parse_pci: failed with rc=-22 ehci-pci 0000:00:13.2: EHCI Host Controller ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci-pci 0000:00:13.2: debug port 1 ehci-pci 0000:00:13.2: irq 6, io mem 0x4ca09500 ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 6.1.0-0.deb11.5-loongson-3 ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci-pci 0000:00:12.0: of_irq_parse_pci: failed with rc=-22 ohci-pci 0000:00:12.0: OHCI PCI host controller ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci-pci 0000:00:12.0: irq 6, io mem 0x4ca04000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI PCI host controller usb usb3: Manufacturer: Linux 6.1.0-0.deb11.5-loongson-3 ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci-pci 0000:00:12.1: of_irq_parse_pci: failed with rc=-22 ohci-pci 0000:00:12.1: OHCI PCI host controller ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci-pci 0000:00:12.1: irq 6, io mem 0x4ca05000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI PCI host controller usb usb4: Manufacturer: Linux 6.1.0-0.deb11.5-loongson-3 ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci-pci 0000:00:13.0: of_irq_parse_pci: failed with rc=-22 ohci-pci 0000:00:13.0: OHCI PCI host controller ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci-pci 0000:00:13.0: irq 6, io mem 0x4ca06000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI PCI host controller usb usb5: Manufacturer: Linux 6.1.0-0.deb11.5-loongson-3 ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci-pci 0000:00:13.1: of_irq_parse_pci: failed with rc=-22 ohci-pci 0000:00:13.1: OHCI PCI host controller random: crng init done ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci-pci 0000:00:13.1: irq 6, io mem 0x4ca07000 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI PCI host controller usb usb6: Manufacturer: Linux 6.1.0-0.deb11.5-loongson-3 ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci-pci 0000:00:14.5: of_irq_parse_pci: failed with rc=-22 ohci-pci 0000:00:14.5: OHCI PCI host controller ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci-pci 0000:00:14.5: irq 6, io mem 0x4ca08000 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI PCI host controller usb usb7: Manufacturer: Linux 6.1.0-0.deb11.5-loongson-3 ohci_hcd usb usb7: SerialNumber: 0000:00:14.5 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected md/raid1:md0: active with 2 out of 2 mirrors md/raid1:md2: active with 2 out of 2 mirrors md0: detected capacity change from 0 to 48795648 md/raid1:md1: active with 2 out of 2 mirrors md1: detected capacity change from 0 to 974720 md2: detected capacity change from 0 to 926703616 raid6: int64x8 gen() 338 MB/s raid6: int64x4 gen() 615 MB/s raid6: int64x2 gen() 505 MB/s raid6: int64x1 gen() 333 MB/s raid6: using algorithm int64x4 gen() 615 MB/s raid6: .... xor() 298 MB/s, rmw enabled raid6: using intx1 recovery algorithm xor: measuring software checksum speed 8regs : 1994 MB/sec 8regs_prefetch : 1540 MB/sec 32regs : 1994 MB/sec 32regs_prefetch : 1540 MB/sec xor: using function: 32regs (1994 MB/sec) device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com PM: Image not found (code -22) EXT4-fs (md0): mounted filesystem with ordered data mode. Quota mode: none. Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. EXT4-fs (md0): re-mounted. Quota mode: none. sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 snd_hda_intel 0000:00:14.2: of_irq_parse_pci: failed with rc=-22 snd_hda_intel 0000:00:14.2: Force to snoop mode by module option [drm] radeon kernel modesetting enabled. pci 0000:00:01.0: of_irq_parse_pci: failed with rc=-22 [drm] initializing kernel modesetting (RS780 0x1002:0x9615 0x1002:0x0000 0x00). ATOM BIOS: 113 radeon 0000:01:05.0: VRAM: 128M 0x0000000040000000 - 0x0000000047FFFFFF (128M used) radeon 0000:01:05.0: GTT: 512M 0x0000000048000000 - 0x0000000067FFFFFF [drm:rs690_pm_info [radeon]] *ERROR* No integrated system info for your GPU, using safe default [drm:radeon_atombios_sideport_present [radeon]] *ERROR* Unsupported IGP table: 1 4 [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 32bits DDR [drm] radeon: 128M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Loading RS780 Microcode radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_pfp.bin radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_me.bin radeon 0000:01:05.0: firmware: direct-loading firmware radeon/R600_rlc.bin radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_uvd.bin [drm] GART: num cpu pages 32768, num gpu pages 131072 [drm] PCIE GART of 512M enabled (table at 0x0000000040148000). radeon 0000:01:05.0: WB enabled radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000048000c00 radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x0000000040056038 radeon 0000:01:05.0: radeon: MSI limited to 32-bit [drm] radeon: irq initialized. [drm] ring test on 0 succeeded in 0 usecs [drm] ring test on 5 succeeded in 1 usecs [drm] UVD initialized successfully. [drm] ib test on ring 0 succeeded in 0 usecs snd_hda_intel 0000:00:14.2: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [drm] ib test on ring 5 succeeded [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA-1 [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] DVI-D-1 [drm] HPD3 [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [drm] Encoders: [drm] DFP3: INTERNAL_KLDSCP_LVTMA radeon 0000:01:05.0: [drm] Cannot find any crtc or sizes [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0 snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x00000100 snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 snd_hda_codec_realtek hdaudioC0D0: inputs: snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 snd_hda_codec_realtek hdaudioC0D0: Line=0x1a snd_hda_codec_realtek hdaudioC0D0: CD=0x1c input: HDA Digital PCBeep as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input3 input: HDA ATI SB Rear Mic as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input4 input: HDA ATI SB Front Mic as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input5 input: HDA ATI SB Line as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input6 input: HDA ATI SB Line Out Front as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input7 input: HDA ATI SB Line Out Surround as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input8 input: HDA ATI SB Line Out CLFE as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input9 input: HDA ATI SB Line Out Side as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input10 input: HDA ATI SB Front Headphone as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input11 input: HDA ATI SB SPDIF as /devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:14.2/sound/card0/input12 Adding 104857584k swap on /dev/mapper/vg0-swap. Priority:-2 extents:1 across:104857584k FS [drm] amdgpu kernel modesetting enabled. radeon 0000:01:05.0: [drm] Cannot find any crtc or sizes EXT4-fs (md1): mounting ext3 file system using the ext4 subsystem EXT4-fs (md1): mounted filesystem with ordered data mode. Quota mode: none. ext3 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none. r8169 0000:07:00.0: firmware: direct-loading firmware rtl_nic/rtl8168d-1.fw RTL8211B Gigabit Ethernet r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) r8169 0000:07:00.0 eth0: No native access to PCI extended config space, falling back to CSI r8169 0000:07:00.0 eth0: Link is Down RTL8211B Gigabit Ethernet r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) r8169 0000:07:00.0 eth0: Link is Down RTL8211B Gigabit Ethernet r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) r8169 0000:07:00.0 eth0: Link is Down
Attachment:
signature.asc
Description: PGP signature