Re: Please test CoLo 1.15-1

["Romano" <pepillo@gmx.de>]

I updated colo on my Cobalt Qube2 from 1.13-1 to 1.15-1
as described:

Preparing to replace colo 1.13-1 (using colo_1.15-1_mipsel.deb) ...
Stopping Cobalt LCD admin menu: paneld.
Unpacking replacement colo ...
Setting up colo (1.15-1) ...
Starting Cobalt LCD admin menu: paneld.

Everything looked fine, until the next reboot, now I get:
! UNIT BOOT !
!     FAILED    !
on the panel! So I connected the serial console and got this output:

Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Wed Mar  3 21:26:25 PST 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................16M
 6.Bank 1:.................................0M
 7.Bank 2:.................................16M
 8.Bank 3:.................................0M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER: trying to boot from partition /dev/hda1
Decompressing -\|/-\|/-\|/-\| done
Decompressing -/-\ done.
ci: unit type <Qube2>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:33:ff}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> mount
ide: {IBM-DTTA-351010}
ide: LBA 19807200
ide: supports PIO mode 4
ide: mode 4 timing
ide: partition 1
ext2: revision 0
1> lcd 'Booting...' /dev/{mounted-volume}
1> -load /boot/default.colo
ext2: {boot/default.colo} --> {./default.colo}
000000ce 206t
1> -script
2> mount hda1
ext2: revision 0
2> load /boot/vmlinux-2.4.26-r5k-cobalt
ext2: {boot/vmlinux-2.4.26-r5k-cobalt} --> {./vmlinux-2.4.26-r5k-cobalt}
0028a8ba 2664634t
2> lcd "Booting Debian"
2> execute root=/dev/hda3 console=ttyS0,{console-speed} hdb=noprobe hdc=noprobe hdd=noprobe
no such variable
script aborted <2>
1> load /boot/vmlinux.gz
ext2: {boot/vmlinux.gz} --> {./vmlinux.gz}
0000d8c8 55496t
1> execute
elf32: 00080000 - 0009bd8f (80080000) (ffffffff.80000000)
elf32: 80080000 (80080000) 114048t + 16t
refusing to load "CoLo" chain loader
script aborted <1>
>

Now I need a fast help to get my server running again!
No such variable? {console-speed} is not set?

Thanks,
Pepillo