orinoco Gold monitor problem !! Help !
Hi,
>
I am a young network administrator and i need you help. I have a
wireless network to test on my bussiness and for that reason i bought
the orinoco gold card (monitor mode and a good price).
I have a Toshiba Laptop 2450 and a kernel 2.6.14.
Linux Seth 2.6.14 #1 SMP Fri Jan 20 11:34:25 CET 2006 i686 GNU/Linux
I use the orinoco driver 0.15RC2 and i suppose the monitor patch is
include on it.
> This is the resul of dmesg | grep orinoco
> orinoco 0.15rc2 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel
> Roskin <proski@gnu.org>, et al)
> orinoco_cs 0.15rc2 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel
> Roskin <proski@gnu.org>, et al)
>
> I thought it was a good beginning but i ve made a mistake.
>
> This is the result of lsmod :
>
> Module Size Used by
> snd_pcm_oss 56864 0
> snd_mixer_oss 22912 4 snd_pcm_oss
> orinoco_cs 18056 1
> pcmcia 44588 5 orinoco_cs
> joydev 13760 0
> parport_pc 45380 0
> parport 41288 1 parport_pc
> yenta_socket 31116 6
> rsrc_nonstatic 17536 1 yenta_socket
> pcmcia_core 48408 3 pcmcia,yenta_socket,rsrc_nonstatic
>
> And in conclusion this is teh result of iwconfig :
>
> eth1 IEEE 802.11-DS ESSID:"My_Network" Nickname:"Seth"
> Mode:Managed Bit Rate:11 Mb/s
> RTS thr:off
> Encryption key:7365-6375-31 Security mode:open
> Link Quality:0 Signal level:134 Noise level:134
> Rx invalid nwid:0 invalid crypt:0 invalid misc:0
>
> The ifconfig eth1 said me that :
>
> eth1 Lien encap:Ethernet HWaddr 00:02:2D:38:5B:F6
> inet adr:192.168.1.12 Bcast:192.168.1.255
> Masque:255.255.255.0
> BROADCAST PROMISC MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 lg file transmission:1000
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> Interruption:3 Adresse de base:0xc100
>
>
> But the result of this command : airmon start eth1 is
> eth1 HermesI orinocoSIOCSIFFLAGS: Périphérique ou
> ressource occupé
> (monitor mode enabled)
>
> And when i launch kismet , ive got that :
> Server options: none
> Client options: none
> Starting server...
> Waiting for server to start before starting UI...
> Suid priv-dropping disabled. This may not be secure.
> No specific sources given to be enabled, all will be enabled.
> Enabling channel hopping.
> Enabling channel splitting.
> Source 0 (HermesI): Enabling monitor mode for orinoco source interface
> eth1 channel 10...
> FATAL: channel get ioctl failed 16:Device or resource busy
>
> And in conclusion the result of iwpriv is:
>
>
> eth1 Available private ioctls :
> force_reset (8BE0) : set 0 & get 0
> card_reset (8BE1) : set 0 & get 0
> set_port3 (8BE2) : set 1 int & get 0
> get_port3 (8BE3) : set 0 & get 1 int
> set_preamble (8BE4) : set 1 int & get 0
> get_preamble (8BE5) : set 0 & get 1 int
> set_ibssport (8BE6) : set 1 int & get 0
> get_ibssport (8BE7) : set 0 & get 1 int
> get_rid (8BE9) : set 0 & get 1024 byte
>
> Did somebody encounter the problem ?? Could you help me to find a
> solution to this problem ? When i used Whax distrib , it is ok : the
> card is on and kismet is ok ?
> Please help me to solve it ! I prefer to use Debian !!
> Thanks for you help !!!
> best regards
>
> PP
>
> P.s: Sorry, but english is not my native language !!
>
>
>
Reply to: