Re: cardmgr: Resource temporarily unavailable with 2.4.x
On Thu, 31 Jul 2003 10:52:36 +0200, Michael Renner Combobulated:
> Moin,
>
> PCMCIA works fine for me, my network card is recognised perfect with the
> kernels 2.4.17 (self compiled) and 2.4.[18|20] as debian package. Even
> with 2.2.20 (the kernel I used to install my DELL latitude 810) it works
> fine.
>
> But when I try to use a memory card (PCMCIA or a cf card with an adapter)
> I get an error message with a 2.4.x kernel.
>
> socket 2: ATA/IDE Fixed Disk
> executing: 'modprobe ide_cs'
> get dev info on socket 2 failed: Resource temporarily unavailable
> executing: 'modprobe -r ide_cs'
>
> With the 2.20 kernel it works:
> socket 2: ATA/IDE Fixed Disk
> executing: 'modprobe ide_cs'
> cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x378-0x37f
> 0x4d0-0x4d7 cs: IO port probe 0x0288-0x0377: clean. cs: IO port probe
> 0x0380-0x04cf: clean. cs: IO port probe 0x04d8-0x04ff: clean. cs: IO port
> probe 0x0a00-0x0aff: clean. cs: IO port probe 0x0c00-0x0cff: excluding
> 0xcf8-0xcff hdc: SunDisk SDP5-5, ATA DISK drive
> hdd: SunDisk SDP5-5, ATA DISK drive
> ide1 at 0x100-0x107,0x10e on irq 9
> hdc: SunDisk SDP5-5, 5MB w/1kB Cache, CHS=160/2/32 hdd: SunDisk SDP5-5,
> 5MB w/1kB Cache, CHS=160/2/32 hdc: hdc1
> hdd: hdd1
> ide_cs: hdc: Vcc = 5.0, Vpp = 0.0
> executing: './ide start hdc'
> VFS: Disk change detected on device ide1(22,0) hdc: hdc1
>
> Weird that it reports hdc _and_ _hdd_, but it works. Of cause: I want to
> use it with the 2.4.20 kernel.
> There is a difference in the list of the loaded modules: i82365 is loaded
> under 2.2.20, but not under 2.4.x (no such device)
>
> Any hints?
cat /etc/sysconfig/pcmcia for starters. What's it look like?
Here's mine:
craig@mobile:~$ cat /etc/sysconfig/pcmcia
PCMCIA=yes
PCIC=yenta_socket
PCIC_OPTS=
CORE_OPTS=
CARDMGR_OPTS=
--
Ciao,
CRH 8^)>
Reply to: