Re: Compaq Evo N1020v, XFree86 config problem
Hi Darek
I hope this helps. I have a A-Open laptop with ATI Radeon Mobility card. I had to upgrade to 2.4.18-686 kernel with DRI and Radeon compiled in then install the XFree86 4.2.1 binaries.
Please note 4.2.1 is a patch that you install over 4.2.0 (therfore it must be installed first).
Regards
Mark
On Fri, 10 Jan 2003 14:23:46 +0100
DarekC@kpwig.gov.pl wrote:
> Hello,
>
> Did someone managed to configure XWindow on Compaq Evo N1020v in testing?
> I'm receiving log as belows:
> ----
> (II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
> (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
> ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
> ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
> ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
> ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
> ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
> ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
> ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
> ATI Rage 128 Mobility ML (AGP)
> (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
> ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LX (AGP),
> ATI Radeon Mobility LY (AGP), ATI Radeon Mobility LZ (AGP),
> ATI Radeon 8500 QL (AGP), ATI Radeon 8500 QN (AGP),
> ATI Radeon 8500 QO (AGP), ATI Radeon 8500 Ql (AGP),
> ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP)
> (II) Primary Device is: PCI 01:05:0
> (II) ATI: Candidate "Device" section "Generic Video Card".
> (WW) ATI: PCI/AGP Mach64 in slot 1:5:0 could not be detected!
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
> ---
> I haven't compiled kernel so far. Should I?
>
>
> Rgds,
> Darek
Reply to: