Re: compaq 1700 pci ethernet
On Sun, 24 Sep 2000, Pat Mahoney wrote:
> My friend has a compaq presario 1700 with a bultin ehternet card on the pci
> bus. It may or may not be combined with a modem on the same card. We
> cannot get the network card to work (potato install, kernel 2.2.17).
>
> Looking around at the kharker laptop site at various other compaq presarios,
> I think the card should work with either the tulip, eexpress100
> (EtherExpressPro/100).
>
> /proc/pci says the vendor and model are unknown. It says irq is 9 and io
> port is 0x1400 [0x1401]. This sounds a bit high. Am I reading /proc/pci
> correctly?
>
> I can't seem to specify irq or io port to the above modules, and neither of
> them work.
>
> The laptop is a custom ordred thing so it may not have the same hardware as
> other compaq 1700's. Any ideas though?
>
> Thanks.
>
> --
> Pat Mahoney <patmahoney@gmx.net>
>
> If puns were deli meat, this would be the wurst.
Install package pciutils, then run:
# lspci -v
You could also try diging into this (long) page:
http://www.datashopper.dk/~finth/pci.html
Cheers,
Cristian
--
I respect faith, but doubt is what gets you an education. -- Wilson Mizner
Reply to: