[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#918156: marked as done (linux-image-4.18.0-0.bpo.3-armmp: please enable support for Ti WL1838 Bluetooth)

Your message dated Sat, 11 Sep 2021 12:14:24 -0700 (PDT)
with message-id <613d0010.1c69fb81.85030.9ecd@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #918156,
regarding linux-image-4.18.0-0.bpo.3-armmp: please enable support for Ti WL1838 Bluetooth
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
918156: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=918156
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 4.18.20-2~bpo9+1
Severity: wishlist
Tags: patch

Dear Maintainer,

Please enable support for above mentioned bluetooth chip.
It is used in SolidRun Ltd. i.MX6 MicroSOMs since revision 1.5,
thereby applying to all Hummingboards and Cuboxes with a recent SoM.

I enabled the necessary options and tested with a local build of 4.20 from
the debian kernel source tree, and am attaching the diff.

Yours sincerely
Josua Mayer


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
Hardware	: Freescale i.MX6 Quad/DualLite (Device Tree)
Revision	: 0000
Device Tree model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)

** PCI devices:
00:00.0 PCI bridge [0604]: Synopsys, Inc. Device [16c3:abcd] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 304
	Region 0: Memory at 01000000 (32-bit, non-prefetchable) [size=1M]
	Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	[virtual] Expansion ROM at 01100000 [disabled] [size=64K]
	BridgeCtl: Parity+ SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: dwc3_haps


** USB devices:
Bus 002 Device 002: ID 04b4:6570 Cypress Semiconductor Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 9.6
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: armhf (armv7l)

Kernel: Linux 4.20.0-trunk-armmp (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.18.0-0.bpo.3-armmp depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.18.0-0.bpo.3-armmp recommends:
ii  apparmor             2.11.0-3+deb9u2
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2.3

Versions of packages linux-image-4.18.0-0.bpo.3-armmp suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-4.18          <none>

Versions of packages linux-image-4.18.0-0.bpo.3-armmp is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
ii  firmware-misc-nonfree     20180825+dfsg-1~bpo9+1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
ii  firmware-ti-connectivity  20161130-4
pn  xen-hypervisor            <none>

-- no debconf information

>From 38737c0c24a8d7c23b46cd0a28e8dcf932ce06e1 Mon Sep 17 00:00:00 2001
From: Josua Mayer <josua.mayer97@gmail.com>
Date: Thu, 3 Jan 2019 20:59:05 +0100
Subject: [PATCH] armmp: enable BT_HCIUART_LL

This allows using the wl1837-st bluetooth chip on the SolidRun i.MX6 SoMs
Revision 1.5.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
---
 debian/config/armhf/config | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/debian/config/armhf/config b/debian/config/armhf/config
index 48d26fea8269..e390fe168b42 100644
--- a/debian/config/armhf/config
+++ b/debian/config/armhf/config
@@ -179,6 +179,10 @@ CONFIG_DMA_CMA=y
 ##
 ## file: drivers/bluetooth/Kconfig
 ##
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_SERDEV=y
 CONFIG_BT_WILINK=m
 
 ##
-- 
2.20.1

--- End Message ---
--- Begin Message --- 
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---
Reply to: