Bug#798909: linux-image-4.1.0-0.bpo.2-686-pae: Brightness control on a HP Compaq nx8220 does not work anymore since kernel 3.16
Package: src:linux
Version: 4.1.6-1~bpo8+1
Severity: normal
Dear Maintainer,
since kernel version 3.16.7-ckt11-1+deb8u3 from jessie the keys
for brightness control on my HP Compaq nx8220 laptop do not work
anymore. The problem also exists with kernel version
4.1.6-1~bpo8+1 from jessie-backports.
When I boot an older kernel (linux-image-3.14-2-686-pae, version
3.14.15-2) the brightness keys do work (without any other changes
to the system).
Regards
Uwe
-- Package-specific info:
** Version:
Linux version 4.1.0-0.bpo.2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.1.6-1~bpo8+1 (2015-09-09)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.1.0-0.bpo.2-686-pae root=UUID=32077a82-12e5-4f22-a606-1dd16fcd68c1 ro quiet
** Not tainted
** Kernel log:
[ 12.005545] [TTM] Initializing pool allocator
[ 12.005554] [TTM] Initializing DMA pool allocator
[ 12.005594] [drm] radeon: 64M of VRAM memory ready
[ 12.005597] [drm] radeon: 512M of GTT memory ready.
[ 12.005618] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 12.006564] [drm] radeon: power management initialized
[ 12.006584] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 12.007467] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 12.007490] radeon 0000:01:00.0: WB enabled
[ 12.007496] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xf2fe5000
[ 12.007499] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.007500] [drm] Driver supports precise vblank timestamp query.
[ 12.007503] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 12.007541] radeon 0000:01:00.0: radeon: using MSI.
[ 12.007566] [drm] radeon: irq initialized.
[ 12.007576] [drm] Loading R300 Microcode
[ 12.184489] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R300_cp.bin
[ 12.184887] [drm] radeon: ring at 0x00000000A0001000
[ 12.184918] [drm] ring test succeeded in 0 usecs
[ 12.185279] [drm] ib test succeeded in 0 usecs
[ 12.186619] [drm] Panel ID String: LPL
[ 12.186626] [drm] Panel Size 1680x1050
[ 12.186900] [drm] Radeon Display Connectors
[ 12.186905] [drm] Connector 0:
[ 12.186909] [drm] VGA-1
[ 12.186916] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 12.186919] [drm] Encoders:
[ 12.186923] [drm] CRT1: INTERNAL_DAC1
[ 12.186927] [drm] Connector 1:
[ 12.186931] [drm] DVI-D-1
[ 12.186935] [drm] HPD1
[ 12.186940] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 12.186944] [drm] Encoders:
[ 12.186948] [drm] DFP1: INTERNAL_TMDS1
[ 12.186951] [drm] Connector 2:
[ 12.186955] [drm] LVDS-1
[ 12.186961] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 12.186964] [drm] Encoders:
[ 12.186968] [drm] LCD1: INTERNAL_LVDS
[ 12.186971] [drm] Connector 3:
[ 12.186975] [drm] SVIDEO-1
[ 12.186978] [drm] Encoders:
[ 12.186982] [drm] TV1: INTERNAL_DAC2
[ 12.252511] Bluetooth: Core ver 2.20
[ 12.252573] NET: Registered protocol family 31
[ 12.252575] Bluetooth: HCI device and connection manager initialized
[ 12.252724] Bluetooth: HCI socket layer initialized
[ 12.252729] Bluetooth: L2CAP socket layer initialized
[ 12.252737] Bluetooth: SCO socket layer initialized
[ 12.269777] [drm] fb mappable at 0xC00C0000
[ 12.269782] [drm] vram apper at 0xC0000000
[ 12.269784] [drm] size 7057408
[ 12.269785] [drm] fb depth is 24
[ 12.269787] [drm] pitch is 6720
[ 12.269981] fbcon: radeondrmfb (fb0) is primary device
[ 12.313714] Console: switching to colour frame buffer device 210x65
[ 12.322717] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 12.322720] radeon 0000:01:00.0: registered panic notifier
[ 12.322835] [drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
[ 12.499707] usbcore: registered new interface driver btusb
[ 12.568146] cfg80211: World regulatory domain updated:
[ 12.568153] cfg80211: DFS Master region: unset
[ 12.568156] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 12.568161] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 12.568165] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 12.568169] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 12.568174] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 12.568179] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 12.568183] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 12.568186] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 12.568190] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 12.676468] Adding 979960k swap on /dev/sda2. Priority:-1 extents:1 across:979960k FS
[ 20.121239] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 20.545061] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 20.590755] systemd-journald[154]: Received request to flush runtime journal from PID 1
[ 20.818962] ttyS0: LSR safety check engaged!
[ 20.819931] ttyS0: LSR safety check engaged!
[ 20.821885] ttyS3: LSR safety check engaged!
[ 20.822717] ttyS3: LSR safety check engaged!
[ 21.983799] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.924104] tg3 0000:10:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 24.924125] tg3 0000:10:00.0 eth0: Flow control is off for TX and off for RX
[ 24.925313] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.484656] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.325310] tg3 0000:10:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 29.325331] tg3 0000:10:00.0 eth0: Flow control is off for TX and off for RX
[ 29.326515] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.598334] RPC: Registered named UNIX socket transport module.
[ 32.598341] RPC: Registered udp transport module.
[ 32.598343] RPC: Registered tcp transport module.
[ 32.598346] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 32.614746] FS-Cache: Loaded
[ 32.683609] FS-Cache: Netfs 'nfs' registered for caching
[ 32.722881] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 34.760942] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 35.410497] ttyS3: LSR safety check engaged!
[ 35.760739] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 35.788812] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.788818] Bluetooth: BNEP filters: protocol multicast
[ 35.788827] Bluetooth: BNEP socket layer initialized
** Model information
not available
** Loaded modules:
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
bnep
cpufreq_userspace
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
btusb
btbcm
btintel
bluetooth
joydev
radeon
iTCO_wdt
iTCO_vendor_support
ttm
drm_kms_helper
drm
hp_wmi
ppdev
sparse_keymap
pcspkr
snd_intel8x0
snd_intel8x0m
tg3
evdev
snd_ac97_codec
ptp
snd_pcm_oss
pps_core
snd_mixer_oss
ipw2200
snd_pcm
libipw
snd_timer
psmouse
lib80211
snd
soundcore
serio_raw
ac97_bus
sr_mod
tifm_7xx1
cdrom
cfg80211
pcmcia
libphy
i2c_algo_bit
lpc_ich
mfd_core
tifm_core
yenta_socket
rfkill
sg
pcmcia_rsrc
rng_core
pcmcia_core
firewire_ohci
sdhci_pci
firewire_core
sdhci
crc_itu_t
irda
mmc_core
crc_ccitt
parport_pc
parport
wmi
tpm_infineon
8250_fintek
tpm
battery
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
ac
video
shpchp
button
acpi_cpufreq
processor
fuse
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
ata_generic
ata_piix
libata
scsi_mod
fan
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c8800000-c8bfffff
Prefetchable memory behind bridge: c0000000-c7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c8000000-c83fffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 80200000-803fffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c8c00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00006000-00006fff
Memory behind bridge: c8400000-c87fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 3100 [size=256]
Region 1: I/O ports at 3200 [size=64]
Region 2: Memory at c8c01000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c8c02000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 3400 [size=256]
Region 1: I/O ports at 3500 [size=128]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0m
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 3580 [size=16]
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV380/M24 [Mobility Radeon X600] [1002:3150] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company nx8220 [103c:0934]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at c8800000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c8820000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Hewlett-Packard Company nc6120/nx8220/nw8240 [103c:12f6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at c8400000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c8401000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: cc000000-cfffffff (prefetchable)
Memory window 1: d0000000-d3ffffff
I/O window 0: 00006000-000060ff
I/O window 1: 00006400-000064ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
02:06.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at c8402000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at c8404000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:06.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033]
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at c8408000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
02:06.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at c840a000 (32-bit, non-prefetchable) [size=256]
Region 1: Memory at c840b000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at c840c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
02:06.5 Communication controller [0780]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller [104c:8035]
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c840d000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at c840e000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at c840f000 (32-bit, non-prefetchable) [size=4K]
Region 3: Memory at c8410000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
10:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11)
Subsystem: Hewlett-Packard Company HP nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:011d Hewlett-Packard Bluetooth 1.2 Interface [Broadcom BCM2035]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.2
APT prefers stable
APT policy: (850, 'stable'), (840, 'stable-updates'), (650, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 4.1.0-0.bpo.2-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.1.0-0.bpo.2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-4.1.0-0.bpo.2-686-pae recommends:
ii firmware-linux-free 3.3
pn irqbalance <none>
ii libc6-i686 2.19-18+deb8u1
Versions of packages linux-image-4.1.0-0.bpo.2-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22
pn linux-doc-4.1 <none>
Versions of packages linux-image-4.1.0-0.bpo.2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
ii firmware-ipw2x00 0.43
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.1.0-0.bpo.2-686-pae/postinst/depmod-error-initrd-4.1.0-0.bpo.2-686-pae: false
linux-image-4.1.0-0.bpo.2-686-pae/prerm/removing-running-kernel-4.1.0-0.bpo.2-686-pae: true
linux-image-4.1.0-0.bpo.2-686-pae/postinst/mips-initrd-4.1.0-0.bpo.2-686-pae:
Reply to: