[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#798424: linux-image-4.1.0-2-powerpc: Appletouch trackpad dead on wake from hibernate



Package: src:linux
Version: 4.1.6-1
Severity: normal

Dear Maintainer,

On my aluminum Powerbook, the trackpad does not reliably wake up after 
hibernate.  It seems like the longer I have it on hibernate, the more likely
the trackpad wakes up dead.  I can only reawaken it by switching to a console
and reloading the appletouch module.

I also have the ams module blacklisted due to excessive kworker activity after
hibernate, but that doesn't affect this bug.  I experience it whether ams is
blacklisted or not.

Here's my dmesg output, the last few lines being me reloading appletouch:

~$ dmesg
[    0.000000] Using PowerMac machine description
[    0.000000] Total memory = 512MB; using 1024kB for hash table (at cff00000)
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.0-2-powerpc (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 Debian 4.1.6-1 (2015-08-23)
[    0.000000] Found initrd at 0xc1600000:0xc2585000
[    0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[    0.000000] Mapped at 0xff7c0000
[    0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[    0.000000] Processor NAP mode on idle enabled.
[    0.000000] PowerMac motherboard: PowerBook G4 15"
[    0.000000] bootconsole [udbg0] enabled
[    0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1
[    0.000000] PCI host bridge /pci@f0000000  ranges:
[    0.000000]  MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
[    0.000000]   IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[    0.000000]  MEM 0x00000000b0000000..0x00000000bfffffff -> 0x00000000b0000000 
[    0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1
[    0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[    0.000000]  MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 
[    0.000000]   IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[    0.000000]  MEM 0x0000000080000000..0x00000000afffffff -> 0x0000000080000000 
[    0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1
[    0.000000] PCI host bridge /pci@f4000000  ranges:
[    0.000000]  MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 
[    0.000000]   IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[    0.000000] via-pmu: Server Mode is disabled
[    0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[    0.000000] nvram: Checking bank 0...
[    0.000000] nvram: gen0=1318, gen1=1319
[    0.000000] nvram: Active bank is: 1
[    0.000000] nvram: OF partition at 0x410
[    0.000000] nvram: XP partition at 0x1020
[    0.000000] nvram: NR partition at 0x1120
[    0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000
[    0.000000] Memory hole size: 0MB
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000001fffffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c077b5c8, node_mem_map dfb5b000
[    0.000000]   DMA zone: 1152 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 131072 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: root=UUID=be0da120-12f5-4e31-80c0-d7fb6bde5ca2 ro radeon.agpmode=-1 modprobe.blacklist=ams
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Sorting __ex_table...
[    0.000000] Memory: 492972K/524288K available (5396K kernel code, 472K rwdata, 1460K rodata, 412K init, 1406K bss, 31316K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Kernel virtual memory layout:
[    0.000000]   * 0xfffcf000..0xfffff000  : fixmap
[    0.000000]   * 0xff800000..0xffc00000  : highmem PTEs
[    0.000000]   * 0xfde27000..0xff800000  : early ioremap
[    0.000000]   * 0xe1000000..0xfde27000  : vmalloc & ioremap
[    0.000000] NR_IRQS:512 nr_irqs:512 16
[    0.000000] mpic: Resetting
[    0.000000] mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 1 CPUs
[    0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[    0.000000] mpic: Initializing for 64 sources
[    0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[    0.000000] time_init: decrementer frequency = 18.432000 MHz
[    0.000000] time_init: processor frequency   = 1499.999994 MHz
[    0.000012] clocksource timebase: mask: 0xffffffffffffffff max_cycles: 0x440407933, max_idle_ns: 440795202532 ns
[    0.000425] clocksource: timebase mult[3640e38e] shift[24] registered
[    0.000774] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0]
[    0.001360] Console: colour dummy device 80x25
[    0.001678] console [tty0] enabled
[    0.001980] bootconsole [udbg0] disabled
[    0.002697] pid_max: default: 32768 minimum: 301
[    0.002796] Security Framework initialized
[    0.002855] AppArmor: AppArmor disabled by boot time parameter
[    0.002871] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002943] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.002963] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.003600] Initializing cgroup subsys blkio
[    0.003631] Initializing cgroup subsys memory
[    0.003660] Initializing cgroup subsys devices
[    0.003682] Initializing cgroup subsys freezer
[    0.003705] Initializing cgroup subsys net_cls
[    0.003725] Initializing cgroup subsys perf_event
[    0.003744] Initializing cgroup subsys net_prio
[    0.003797] ftrace: allocating 18610 entries in 55 pages
[    0.029426] MPC7450 family performance monitor hardware support registered
[    0.031255] devtmpfs: initialized
[    0.031827] device-tree: Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[    0.038045] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.038685] NET: Registered protocol family 16
[    0.039953] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[    0.039976]  channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1
[    0.040007]  channel 0 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@0
[    0.040122] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[    0.040145]  channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0
[    0.040206] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[    0.040225]  channel 1 bus <multibus>
[    0.040240]  channel 2 bus <multibus>
[    0.040778] PCI: Probing PCI hardware
[    0.040955] PCI host bridge to bus 0000:00
[    0.040984] pci_bus 0000:00: root bus resource [io  0x802000-0x1001fff] (bus address [0x0000-0x7fffff])
[    0.041013] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[    0.041037] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xbfffffff]
[    0.041060] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.041082] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[    0.041127] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000
[    0.041448] pci 0000:00:10.0: [1002:4e50] type 00 class 0x030000
[    0.041474] pci 0000:00:10.0: reg 0x10: [mem 0xb8000000-0xbfffffff pref]
[    0.041488] pci 0000:00:10.0: reg 0x14: [io  0x802400-0x8024ff]
[    0.041502] pci 0000:00:10.0: reg 0x18: [mem 0xb0000000-0xb000ffff]
[    0.041532] pci 0000:00:10.0: reg 0x30: [mem 0xb0020000-0xb003ffff pref]
[    0.041569] pci 0000:00:10.0: supports D1 D2
[    0.041788] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.041954] PCI host bridge to bus 0001:10
[    0.041978] pci_bus 0001:10: root bus resource [io  0x0000-0x7fffff]
[    0.041999] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff]
[    0.042021] pci_bus 0001:10: root bus resource [mem 0x80000000-0xafffffff]
[    0.042043] pci_bus 0001:10: root bus resource [bus 10-ff]
[    0.042063] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff
[    0.042101] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000
[    0.042334] pci 0001:10:12.0: [14e4:4320] type 00 class 0x028000
[    0.042355] pci 0001:10:12.0: reg 0x10: [mem 0xa0006000-0xa0007fff]
[    0.042416] pci 0001:10:12.0: supports D1 D2
[    0.042424] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.042632] pci 0001:10:13.0: [104c:ac56] type 02 class 0x060700
[    0.042656] pci 0001:10:13.0: reg 0x10: [mem 0xa0004000-0xa0004fff]
[    0.042691] pci 0001:10:13.0: supports D1 D2
[    0.042699] pci 0001:10:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.042903] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000
[    0.042924] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[    0.043145] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310
[    0.043165] pci 0001:10:19.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.043362] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310
[    0.043382] pci 0001:10:1a.0: reg 0x10: [mem 0xa0003000-0xa0003fff]
[    0.043591] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310
[    0.043613] pci 0001:10:1b.0: reg 0x10: [mem 0xa0002000-0xa0002fff]
[    0.043674] pci 0001:10:1b.0: supports D1 D2
[    0.043683] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.043881] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310
[    0.043902] pci 0001:10:1b.1: reg 0x10: [mem 0xa0001000-0xa0001fff]
[    0.043964] pci 0001:10:1b.1: supports D1 D2
[    0.043972] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.044174] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320
[    0.044196] pci 0001:10:1b.2: reg 0x10: [mem 0xa0000000-0xa00000ff]
[    0.044258] pci 0001:10:1b.2: supports D1 D2
[    0.044266] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.044647] pci 0001:10:13.0: Primary bus is hard wired to 0
[    0.044671] pci 0001:10:13.0: bridge configuration invalid ([bus 01-01]), reconfiguring
[    0.044833] pci_bus 0001:11: busn_res: [bus 11-ff] end is updated to 14
[    0.044846] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 14
[    0.045007] PCI host bridge to bus 0002:24
[    0.045029] pci_bus 0002:24: root bus resource [io  0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff])
[    0.045059] pci_bus 0002:24: root bus resource [mem 0xf5000000-0xf5ffffff]
[    0.045081] pci_bus 0002:24: root bus resource [bus 24-ff]
[    0.045101] pci_bus 0002:24: busn_res: [bus 24-ff] end is updated to ff
[    0.045136] pci 0002:24:0b.0: [106b:0036] type 00 class 0x060000
[    0.045365] pci 0002:24:0d.0: [106b:003b] type 00 class 0xff0000
[    0.045383] pci 0002:24:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff]
[    0.045581] pci 0002:24:0e.0: [106b:0031] type 00 class 0x0c0010
[    0.045600] pci 0002:24:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff]
[    0.045651] pci 0002:24:0e.0: supports D1 D2
[    0.045659] pci 0002:24:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.045857] pci 0002:24:0f.0: [106b:0032] type 00 class 0x020000
[    0.045876] pci 0002:24:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff]
[    0.045915] pci 0002:24:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref]
[    0.046190] pci_bus 0002:24: busn_res: [bus 24-ff] end is updated to 24
[    0.046302] PCI 0000:00 Cannot reserve Legacy IO [io  0x802000-0x802fff]
[    0.046320] pci_bus 0000:00: resource 4 [io  0x802000-0x1001fff]
[    0.046329] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[    0.046337] pci_bus 0000:00: resource 6 [mem 0xb0000000-0xbfffffff]
[    0.046365] pci 0001:10:13.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.046375] pci 0001:10:13.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.046385] pci 0001:10:13.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.046395] pci 0001:10:13.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.046405] pci 0001:10:13.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.046415] pci 0001:10:13.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.046424] pci 0001:10:13.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.046434] pci 0001:10:13.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.046450] pci 0001:10:13.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.046482] pci 0001:10:13.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.046504] pci 0001:10:13.0: BAR 13: assigned [io  0x1000-0x10ff]
[    0.046525] pci 0001:10:13.0: BAR 14: assigned [io  0x1100-0x11ff]
[    0.046547] pci 0001:10:13.0: CardBus bridge to [bus 11-14]
[    0.046567] pci 0001:10:13.0:   bridge window [io  0x1000-0x10ff]
[    0.046588] pci 0001:10:13.0:   bridge window [io  0x1100-0x11ff]
[    0.046610] pci 0001:10:13.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.046638] pci 0001:10:13.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.046660] pci_bus 0001:10: resource 4 [io  0x0000-0x7fffff]
[    0.046669] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
[    0.046677] pci_bus 0001:10: resource 6 [mem 0x80000000-0xafffffff]
[    0.046686] pci_bus 0001:11: resource 0 [io  0x1000-0x10ff]
[    0.046694] pci_bus 0001:11: resource 1 [io  0x1100-0x11ff]
[    0.046702] pci_bus 0001:11: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.046711] pci_bus 0001:11: resource 3 [mem 0x88000000-0x8bffffff]
[    0.046722] pci_bus 0002:24: resource 4 [io  0xff7fe000-0xffffdfff]
[    0.046730] pci_bus 0002:24: resource 5 [mem 0xf5000000-0xf5ffffff]
[    0.050913] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[    0.050961] vgaarb: loaded
[    0.050973] vgaarb: bridge control possible 0000:00:10.0
[    0.051321] SCSI subsystem initialized
[    0.051531] libata version 3.00 loaded.
[    0.052313] Switched to clocksource timebase
[    0.087376] NET: Registered protocol family 2
[    0.088011] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.088066] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.088114] TCP: Hash tables configured (established 4096 bind 4096)
[    0.088227] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.088257] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.088473] NET: Registered protocol family 1
[    0.088585] Apple USB OHCI 0001:10:19.0 disabled by firmware
[    0.088609] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed.
[    0.088643] pci 0001:10:1a.0: enabling device (0000 -> 0002)
[    0.144362] pci 0001:10:1b.0: enabling device (0000 -> 0002)
[    0.200337] pci 0001:10:1b.1: enabling device (0000 -> 0002)
[    0.256336] pci 0001:10:1b.2: enabling device (0004 -> 0006)
[    0.256389] PCI: CLS mismatch (32 != 1020), using 32 bytes
[    0.256595] Unpacking initramfs...
[    1.176286] Freeing initrd memory: 15892K (c1600000 - c2585000)
[    1.176810] Thermal assist unit not available
[    1.177813] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.177910] audit: initializing netlink subsys (disabled)
[    1.177989] audit: type=2000 audit(1441731936.164:1): initialized
[    1.178826] zpool: loaded
[    1.179024] VFS: Disk quotas dquot_6.6.0
[    1.179078] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.180514] alg: No test for stdrng (krng)
[    1.180635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.180774] io scheduler noop registered
[    1.180797] io scheduler deadline registered
[    1.180839] io scheduler cfq registered (default)
[    1.181632] Using unsupported 1280x854 ATY,Jasper_A at b8008000, depth=8, pitch=1280
[    1.203673] Console: switching to colour frame buffer device 160x53
[    1.225216] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,JasperParent@10/ATY,Jasper_A@0
[    1.225562] Using unsupported 640x480 ATY,Jasper_B at ba008000, depth=8, pitch=768
[    1.225824] checking generic (b8008000 10ae00) vs hw (ba008000 5a000)
[    1.226003] fb1: Open Firmware frame buffer device on /pci@f0000000/ATY,JasperParent@10/ATY,Jasper_B@1
[    1.226470] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.227675] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[    1.227950] Serial: MPC52xx PSC UART driver
[    1.228144] Generic non-volatile memory driver v1.1
[    1.228434] Linux agpgart interface v0.103
[    1.228606] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[    1.230275] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[    1.230602] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[    1.231035] MacIO PCI driver attached to Intrepid chipset
[    1.232686] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port
[    1.233428] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port
[    1.234697] pata-pci-macio 0002:24:0d.0: enabling device (0000 -> 0002)
[    1.235041] adb: starting probe task...
[    1.235170] adb: finished probe task...
[    1.248352] pata-pci-macio 0002:24:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[    1.249369] scsi host0: pata_macio
[    1.249687] ata1: PATA max UDMA/100 irq 39
[    1.412716] ata1.00: ATA-6: ST940110A, 3.07, max UDMA/100
[    1.412896] ata1.00: 78140160 sectors, multi 16: LBA48 
[    1.428649] ata1.00: configured for UDMA/100
[    1.429122] scsi 0:0:0:0: Direct-Access     ATA      ST940110A        3.07 PQ: 0 ANSI: 5
[    2.268328] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[    2.269337] scsi host1: pata_macio
[    2.269655] ata2: PATA max MWDMA2 irq 24
[    2.270139] mousedev: PS/2 mouse device common for all mice
[    2.278174] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[    2.285842] PowerMac i2c bus pmu 2 registered
[    2.293359] PowerMac i2c bus pmu 1 registered
[    2.300778] PowerMac i2c bus mac-io 0 registered
[    2.308353] PowerMac i2c bus uni-n 0 registered
[    2.315947] PowerMac i2c bus uni-n 1 registered
[    2.323676] Registering PowerMac CPU frequency driver
[    2.331097] Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz
[    2.344436] ledtrig-cpu: registered to indicate activity on CPUs
[    2.351807] NET: Registered protocol family 10
[    2.359419] mip6: Mobile IPv6
[    2.366520] NET: Registered protocol family 17
[    2.373601] mpls_gso: MPLS GSO support
[    2.381085] registered taskstats version 1
[    2.388665] input: PMU as /devices/virtual/input/input0
[    2.396033] rtc-generic rtc-generic: setting system clock to 2015-09-08 17:05:37 UTC (1441731937)
[    2.403496] PM: Hibernation image not present or could not be loaded.
[    2.440689] ata2.00: ATAPI: MATSHITADVD-R   UJ-845E, DMP2, max UDMA/66
[    2.460678] ata2.00: configured for MWDMA2
[    2.472354] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-845E  DMP2 PQ: 0 ANSI: 5
[    2.485826] Freeing unused kernel memory: 412K (c06b6000 - c071d000)
[    2.558142] random: systemd-udevd urandom read with 0 bits of entropy available
[    2.669788] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.677328] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.727486] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[    2.743854] usbcore: registered new interface driver usbfs
[    2.757135] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.768047] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[    2.783153] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00
[    2.790398] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[    2.790405] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[    2.790410] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[    2.790416] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[    2.790422] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[    2.790610] sd 0:0:0:0: [sda] Write Protect is off
[    2.797766] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.804402] usbcore: registered new interface driver hub
[    2.811993] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.813209] gem 0002:24:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:36:97:4c
[    2.826878] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
[    2.835418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.846150] usbcore: registered new device driver usb
[    2.858313] firewire_ohci 0002:24:0e.0: enabling device (0000 -> 0002)
[    2.874600] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.903125]  sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    2.914582] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.922760] ehci-pci: EHCI PCI platform driver
[    2.948385] firewire_ohci 0002:24:0e.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    2.959301] ehci-pci 0001:10:1b.2: EHCI Host Controller
[    2.968208] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.999753] ehci-pci 0001:10:1b.2: new USB bus registered, assigned bus number 1
[    3.027040] ehci-pci 0001:10:1b.2: irq 63, io mem 0xa0000000
[    3.060346] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[    3.068403] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.076217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.083924] usb usb1: Product: EHCI Host Controller
[    3.091488] usb usb1: Manufacturer: Linux 4.1.0-2-powerpc ehci_hcd
[    3.099178] usb usb1: SerialNumber: 0001:10:1b.2
[    3.108964] hub 1-0:1.0: USB hub found
[    3.119008] hub 1-0:1.0: 5 ports detected
[    3.128864] ohci-pci: OHCI PCI platform driver
[    3.141398] Apple USB OHCI 0001:10:19.0 disabled by firmware
[    3.149249] ohci-pci 0001:10:1a.0: OHCI PCI host controller
[    3.156939] ohci-pci 0001:10:1a.0: new USB bus registered, assigned bus number 2
[    3.166661] ohci-pci 0001:10:1a.0: irq 29, io mem 0xa0003000
[    3.248061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.255971] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.263765] usb usb2: Product: OHCI PCI host controller
[    3.271500] usb usb2: Manufacturer: Linux 4.1.0-2-powerpc ohci_hcd
[    3.279285] usb usb2: SerialNumber: 0001:10:1a.0
[    3.288472] hub 2-0:1.0: USB hub found
[    3.296599] hub 2-0:1.0: 2 ports detected
[    3.304726] ohci-pci 0001:10:1b.0: OHCI PCI host controller
[    3.312757] ohci-pci 0001:10:1b.0: new USB bus registered, assigned bus number 3
[    3.320825] ohci-pci 0001:10:1b.0: irq 63, io mem 0xa0002000
[    3.405528] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.413265] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.420872] usb usb3: Product: OHCI PCI host controller
[    3.428387] usb usb3: Manufacturer: Linux 4.1.0-2-powerpc ohci_hcd
[    3.435940] usb usb3: SerialNumber: 0001:10:1b.0
[    3.444716] hub 3-0:1.0: USB hub found
[    3.452176] hub 3-0:1.0: 3 ports detected
[    3.459619] firewire_core 0002:24:0e.0: created device fw0: GUID 001124fffe36974c, S800
[    3.467615] ohci-pci 0001:10:1b.1: OHCI PCI host controller
[    3.475277] ohci-pci 0001:10:1b.1: new USB bus registered, assigned bus number 4
[    3.482864] ohci-pci 0001:10:1b.1: irq 63, io mem 0xa0001000
[    3.564066] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.571499] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.578793] usb usb4: Product: OHCI PCI host controller
[    3.586010] usb usb4: Manufacturer: Linux 4.1.0-2-powerpc ohci_hcd
[    3.593238] usb usb4: SerialNumber: 0001:10:1b.1
[    3.601637] hub 4-0:1.0: USB hub found
[    3.608672] hub 4-0:1.0: 2 ports detected
[    3.656336] usb 2-1: new full-speed USB device number 2 using ohci-pci
[    3.971393] usb 2-1: New USB device found, idVendor=05ac, idProduct=1000
[    3.978403] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.124356] usb 2-2: new full-speed USB device number 3 using ohci-pci
[    4.307352] usb 2-2: New USB device found, idVendor=05ac, idProduct=020e
[    4.314157] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.320873] usb 2-2: Product: Apple Internal Keyboard/Trackpad
[    4.327474] usb 2-2: Manufacturer: Apple Computer
[    4.369029] hidraw: raw HID events driver (C) Jiri Kosina
[    4.432140] usbcore: registered new interface driver usbhid
[    4.438713] usbhid: USB HID core driver
[    4.449334] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/0003:05AC:020E.0003/input/input1
[    4.459850] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/0003:05AC:1000.0001/input/input2
[    4.520778] hid-generic 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
[    4.529217] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/0003:05AC:1000.0002/input/input3
[    4.576470] apple 0003:05AC:020E.0003: input,hidraw1: USB HID v1.10 Keyboard [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input0
[    4.584936] hid-generic 0003:05AC:1000.0002: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
[    4.593846] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.2/0003:05AC:020E.0004/input/input4
[    4.660722] apple 0003:05AC:020E.0004: input,hidraw3: USB HID v1.10 Device [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input2
[    4.724702] PM: Starting manual resume from disk
[    4.733372] PM: Hibernation image partition 8:4 present
[    4.733376] PM: Looking for hibernation image.
[    4.753414] PM: Image not found (code -22)
[    4.753419] PM: Hibernation image not present or could not be loaded.
[    5.179440] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    5.521268] random: nonblocking pool is initialized
[    6.612173] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    6.780399] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    6.799510] systemd[1]: Detected architecture ppc.
[    6.890343] systemd[1]: Set hostname to <powerbook2>.
[    9.018822] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.038580] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    9.058159] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.077936] systemd[1]: Created slice Root Slice.
[    9.097731] systemd[1]: Listening on Journal Socket.
[    9.117557] systemd[1]: Listening on udev Control Socket.
[    9.137530] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.158057] systemd[1]: Created slice System Slice.
[    9.225908] systemd[1]: Created slice system-getty.slice.
[    9.250858] systemd[1]: Starting Load Kernel Modules...
[    9.275331] systemd[1]: Starting Increase datagram queue length...
[    9.304614] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    9.330067] systemd[1]: Mounting POSIX Message Queue File System...
[    9.354461] systemd[1]: Mounting Debug File System...
[    9.376380] systemd[1]: Listening on fsck to fsckd communication Socket.
[    9.396098] systemd[1]: Listening on udev Kernel Socket.
[    9.416980] systemd[1]: Listening on Journal Audit Socket.
[    9.436977] systemd[1]: Created slice User and Session Slice.
[    9.458116] systemd[1]: Reached target Slices.
[    9.476820] systemd[1]: Reached target Encrypted Volumes.
[    9.501943] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.520500] systemd[1]: Reached target Remote File Systems (Pre).
[    9.665502] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.687209] systemd[1]: Starting Create Static Device Nodes in /dev...
[   10.342374] systemd[1]: Started Increase datagram queue length.
[   10.372407] systemd[1]: Listening on Syslog Socket.
[   10.393932] systemd[1]: Starting Journal Service...
[   10.435605] systemd[1]: Started Create Static Device Nodes in /dev.
[   10.466755] systemd[1]: Mounted POSIX Message Queue File System.
[   10.484969] systemd[1]: Mounted Debug File System.
[   10.495451] lp: driver loaded but no devices found
[   10.545149] systemd[1]: Starting udev Kernel Device Manager...
[   10.630895] systemd[1]: Started Journal Service.
[   10.856269] adt746x: version 1 (supported)
[   10.864474] sensor 0: CPU/INTREPID BOTTOMSIDE
[   10.872550] sensor 1: CPU BOTTOMSIDE
[   10.880604] sensor 2: PWR SUPPLY BOTTOMSIDE
[   10.889663] adt746x: ADT7467 initializing
[   10.901312] adt746x: Lowering max temperatures from 81, 80, 87 to 70, 50, 70
[   11.278859] i2c /dev entries driver
[   11.920589] snd-aoa-fabric-layout: Using PMF GPIOs
[   11.952702] snd-aoa-fabric-layout: can use this codec
[   12.031981] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a
[   13.399603] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   13.660204] systemd-journald[142]: Received request to flush runtime journal from PID 1
[   14.356007] yenta_cardbus 0001:10:13.0: CardBus bridge found [0000:0000]
[   14.362595] yenta_cardbus 0001:10:13.0: Enabling burst memory read transactions
[   14.369044] yenta_cardbus 0001:10:13.0: Using CSCINT to route CSC interrupts to PCI
[   14.375468] yenta_cardbus 0001:10:13.0: Routing CardBus interrupts to PCI
[   14.381824] yenta_cardbus 0001:10:13.0: TI: mfunc 0x00001002, devctl 0x60
[   14.588398] yenta_cardbus 0001:10:13.0: ISA IRQ mask 0x0000, PCI irq 53
[   14.594765] yenta_cardbus 0001:10:13.0: Socket status: 30000087
[   14.603916] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge window: [io  0x0000-0x7fffff]
[   14.610718] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge window: [mem 0xf3000000-0xf3ffffff]
[   14.617350] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf3000000-0xf3ffffff:
[   14.627541] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.636946]  clean.
[   14.643065] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0xafffffff]
[   14.675241] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   14.690358] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0xafffffff:
[   14.704193]  excluding 0x80000000-0x807fffff 0x84000000-0x8bffffff 0xa0000000-0xa07fffff
[   14.925614] [drm] Initialized drm 1.1.0 20060810
[   15.415595] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.1/input/input5
[   15.456988] usb 2-1: USB disconnect, device number 2
[   15.470111] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62
[   15.498077] usbcore: registered new interface driver appletouch
[   15.535210] cfg80211: Calling CRDA to update world regulatory domain
[   15.896370] usb 2-1: new full-speed USB device number 4 using ohci-pci
[   15.930088] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x80ffffff:
[   15.944495]  excluding 0x80000000-0x800fffff
[   16.038774] [drm] radeon kernel modesetting enabled.
[   16.038877] checking generic (b8008000 10ae00) vs hw (b8000000 8000000)
[   16.038878] fb: switching to radeondrmfb from OFfb ATY,Jasper
[   16.074408] Console: switching to colour dummy device 80x25
[   16.074954] checking generic (ba008000 5a000) vs hw (b8000000 8000000)
[   16.074961] fb: switching to radeondrmfb from OFfb ATY,Jasper
[   16.075541] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[   16.076591] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1002:0x4E50).
[   16.076618] [drm] Forcing AGP to PCI mode
[   16.076636] [drm] register mmio base: 0xB0000000
[   16.076643] [drm] register mmio size: 65536
[   16.076740] radeon 0000:00:10.0: Invalid ROM contents
[   16.076765] radeon 0000:00:10.0: Invalid ROM contents
[   16.077002] [drm:radeon_get_bios [radeon]] *ERROR* Unable to locate a BIOS ROM
[   16.077034] [drm] Using device-tree clock info
[   16.077044] [drm] Generation 2 PCI interface, using max accessible memory
[   16.077060] radeon 0000:00:10.0: VRAM: 128M 0x00000000B8000000 - 0x00000000BFFFFFFF (64M used)
[   16.077076] radeon 0000:00:10.0: GTT: 512M 0x0000000098000000 - 0x00000000B7FFFFFF
[   16.077126] [drm] Detected VRAM RAM=128M, BAR=128M
[   16.077135] [drm] RAM width 128bits DDR
[   16.099610] [TTM] Zone  kernel: Available graphics memory: 255148 kiB
[   16.099642] [TTM] Initializing pool allocator
[   16.099732] [drm] radeon: 64M of VRAM memory ready
[   16.099743] [drm] radeon: 512M of GTT memory ready.
[   16.099812] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   16.103989] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[   16.104036] [drm] PCI GART of 512M enabled (table at 0x000000001D580000).
[   16.104144] radeon 0000:00:10.0: WB enabled
[   16.104162] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000098000000 and cpu addr 0xde716000
[   16.104180] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   16.104189] [drm] Driver supports precise vblank timestamp query.
[   16.104240] [drm] radeon: irq initialized.
[   16.104265] [drm] Loading R300 Microcode
[   16.378198] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[   16.388359] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
[   16.388397] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
[   16.400765] Broadcom 43xx driver loaded [ Features: PMNLS ]
[   16.407468] radeon 0000:00:10.0: firmware: direct-loading firmware radeon/R300_cp.bin
[   16.407833] [drm] radeon: ring at 0x0000000098001000
[   16.407881] [drm] ring test succeeded in 3 usecs
[   16.408175] [drm] ib test succeeded in 0 usecs
[   16.415663] [drm] Connector Table: 3 (powerbook external tmds)
[   16.415712] [drm] No panel info found in BIOS
[   16.415728] [drm] Panel info derived from registers
[   16.415736] [drm] Panel Size 1280x854
[   16.415909] [drm] No valid Ext TMDS info found in BIOS
[   16.416033] [drm] No TV DAC info found in BIOS
[   16.806886] [drm] radeon legacy LVDS backlight initialized
[   16.806907] [drm] Radeon Display Connectors
[   16.806914] [drm] Connector 0:
[   16.806921] [drm]   LVDS-1
[   16.806929] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   16.806938] [drm]   Encoders:
[   16.806945] [drm]     LCD1: INTERNAL_LVDS
[   16.806953] [drm] Connector 1:
[   16.806959] [drm]   DVI-I-1
[   16.806965] [drm]   HPD2
[   16.806973] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   16.806981] [drm]   Encoders:
[   16.806987] [drm]     DFP2: INTERNAL_DVO1
[   16.806994] [drm]     CRT1: INTERNAL_DAC1
[   16.807001] [drm] Connector 2:
[   16.807007] [drm]   SVIDEO-1
[   16.807013] [drm]   Encoders:
[   16.807020] [drm]     TV1: INTERNAL_DAC2
[   17.276348] [drm] fb mappable at 0xB8040000
[   17.276380] [drm] vram apper at 0xB8000000
[   17.276388] [drm] size 4374528
[   17.276394] [drm] fb depth is 24
[   17.276401] [drm]    pitch is 5120
[   17.914564] Console: switching to colour frame buffer device 160x53
[   17.943631] radeon 0000:00:10.0: fb0: radeondrmfb frame buffer device
[   17.943888] radeon 0000:00:10.0: registered panic notifier
[   17.946834] [drm] Initialized radeon 2.42.0 20080528 for 0000:00:10.0 on minor 0
[   18.081838] b43 ssb0:0: firmware: direct-loading firmware b43/ucode5.fw
[   18.085397] usb 2-1: New USB device found, idVendor=05ac, idProduct=8205
[   18.085682] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   18.221553] b43 ssb0:0: firmware: direct-loading firmware b43/pcm5.fw
[   18.369273] b43 ssb0:0: firmware: direct-loading firmware b43/b0g0initvals5.fw
[   18.717206] b43 ssb0:0: firmware: direct-loading firmware b43/b0g0bsinitvals5.fw
[   18.724369] cfg80211: Calling CRDA to update world regulatory domain
[   18.886690] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   19.080478] Bluetooth: Core ver 2.20
[   19.080708] NET: Registered protocol family 31
[   19.080892] Bluetooth: HCI device and connection manager initialized
[   19.081835] Bluetooth: HCI socket layer initialized
[   19.082044] Bluetooth: L2CAP socket layer initialized
[   19.082262] Bluetooth: SCO socket layer initialized
[   19.379364] usbcore: registered new interface driver btusb
[   20.189434] cfg80211: World regulatory domain updated:
[   20.197602] cfg80211:  DFS Master region: unset
[   20.197787] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.214225] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.222805] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.231246] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.239652] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   20.248172] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   20.256692] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   20.265296] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   20.273905] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   20.486052] Adding 749996k swap on /dev/sda4.  Priority:-1 extents:1 across:749996k FS
[   20.924662] sungem_phy: PHY ID: 1410cc2, addr: 0
[   20.924725] gem 0002:24:0f.0 eth0: Found Marvell 88E1111 PHY
[   20.935788] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.545602] RPC: Registered named UNIX socket transport module.
[   22.555653] RPC: Registered udp transport module.
[   22.565464] RPC: Registered tcp transport module.
[   22.575113] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   22.638082] FS-Cache: Loaded
[   22.723069] FS-Cache: Netfs 'nfs' registered for caching
[   22.854471] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   27.056010] input: Mouseemu virtual keyboard as /devices/virtual/input/input6
[   27.083255] input: Mouseemu virtual mouse as /devices/virtual/input/input7
[   29.423978] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.432168] Bluetooth: BNEP filters: protocol multicast
[   29.443946] Bluetooth: BNEP socket layer initialized
[   37.564405] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   37.676496] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   47.516469] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   47.620544] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   48.092665] sungem_phy: PHY ID: 1410cc2, addr: 0
[   48.092731] gem 0002:24:0f.0 eth0: Found Marvell 88E1111 PHY
[   48.093138] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   48.520336] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   48.620646] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   52.134007] wlan0: authenticate with 00:14:bf:de:4d:79
[   52.156455] wlan0: send auth to 00:14:bf:de:4d:79 (try 1/3)
[   52.160269] wlan0: authenticated
[   52.160370] b43 ssb0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   52.160376] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   52.160381] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   52.164349] wlan0: associate with 00:14:bf:de:4d:79 (try 1/3)
[   52.166501] wlan0: RX AssocResp from 00:14:bf:de:4d:79 (capab=0x411 status=0 aid=5)
[   52.166946] wlan0: associated
[   52.166991] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  394.396416] fuse init (API version 7.23)
[ 4526.152080] PM: Hibernation mode set to 'shutdown'
[ 4526.310411] PM: Syncing filesystems ... done.
[ 4526.457466] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4526.459215] PM: Basic memory bitmaps created
[ 4526.459223] PM: Preallocating image memory... done (allocated 49144 pages)
[ 4526.951909] PM: Allocated 196576 kbytes in 0.49 seconds (401.17 MB/s)
[ 4526.952173] Freezing remaining freezable tasks ... (elapsed 1.221 seconds) done.
[ 4528.174459] Suspending console(s) (use no_console_suspend to debug)
[ 4528.174823] wlan0: deauthenticating from 00:14:bf:de:4d:79 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4528.186171] queueing ieee80211 work while going to suspend
[ 4528.226070] cfg80211: Calling CRDA to update world regulatory domain
[ 4528.227403] gem 0002:24:0f.0 eth0: suspending, WakeOnLan disabled
[ 4531.381876] cfg80211: Calling CRDA to update world regulatory domain
[ 4534.533779] cfg80211: Calling CRDA to update world regulatory domain
[ 4537.685697] cfg80211: Calling CRDA to update world regulatory domain
[ 4540.837610] cfg80211: Calling CRDA to update world regulatory domain
[ 4543.188013] PM: freeze of devices complete after 15013.688 msecs
[ 4543.188586] PM: late freeze of devices complete after 0.565 msecs
[ 4543.189149] PM: noirq freeze of devices complete after 0.558 msecs
[ 4543.189479] PM: Creating hibernation image:
[ 4543.224396] PM: Need to copy 55021 pages
[ 4543.224403] PM: Normal pages needed: 55021 + 1024, available pages: 76038
[ 4543.266338] PM: noirq restore of devices complete after 76.282 msecs
[ 4543.266657] PM: early restore of devices complete after 0.277 msecs
[ 4543.295196] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 4543.295206] [drm] PCI GART of 512M enabled (table at 0x000000001D580000).
[ 4543.295224] radeon 0000:00:10.0: WB enabled
[ 4543.295233] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000098000000 and cpu addr 0xde716000
[ 4543.295314] [drm] radeon: ring at 0x0000000098001000
[ 4543.295350] [drm] ring test succeeded in 4 usecs
[ 4543.295389] [drm] ib test succeeded in 0 usecs
[ 4543.707769] sd 0:0:0:0: [sda] Starting disk
[ 4543.972806] usb usb2: root hub lost power or was reset
[ 4543.992378] usb usb3: root hub lost power or was reset
[ 4544.011935] usb usb4: root hub lost power or was reset
[ 4544.012007] usb usb1: root hub lost power or was reset
[ 4544.012470] sungem_phy: PHY ID: 1410cc2, addr: 0
[ 4544.012523] gem 0002:24:0f.0 eth0: Found Marvell 88E1111 PHY
[ 4544.012838] cfg80211: Calling CRDA to update world regulatory domain
[ 4544.778424] ata1.00: configured for UDMA/100
[ 4544.994139] usb 2-2: reset full-speed USB device number 3 using ohci-pci
[ 4545.286117] usb 2-1: reset full-speed USB device number 4 using ohci-pci
[ 4545.542002] usb 2-1: device firmware changed
[ 4545.698509] adb: starting probe task...
[ 4545.698518] adb: finished probe task...
[ 4545.930559] ata2.00: configured for MWDMA2
[ 4545.962095] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 4546.058215] PM: restore of devices complete after 2763.311 msecs
[ 4546.068223] PM: Image restored successfully.
[ 4546.068240] PM: Basic memory bitmaps freed
[ 4546.068244] Restarting tasks ... 
[ 4546.068642] usb 2-1: USB disconnect, device number 4
[ 4546.072099] done.
[ 4546.206167] usb 2-1: new full-speed USB device number 5 using ohci-pci
[ 4546.531032] usb 2-1: New USB device found, idVendor=05ac, idProduct=1000
[ 4546.531044] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4546.552281] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/0003:05AC:1000.0005/input/input8
[ 4546.606318] hid-generic 0003:05AC:1000.0005: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
[ 4546.628165] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/0003:05AC:1000.0006/input/input9
[ 4546.628423] hid-generic 0003:05AC:1000.0006: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
[ 4547.158086] cfg80211: Calling CRDA to update world regulatory domain
[ 4549.978289] wlan0: authenticate with 00:14:bf:de:4d:79
[ 4549.990112] wlan0: send auth to 00:14:bf:de:4d:79 (try 1/3)
[ 4549.991640] wlan0: authenticated
[ 4549.991691] b43 ssb0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 4549.991697] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4549.991702] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4549.994001] wlan0: associate with 00:14:bf:de:4d:79 (try 1/3)
[ 4549.996443] wlan0: RX AssocResp from 00:14:bf:de:4d:79 (capab=0x411 status=0 aid=5)
[ 4549.996876] wlan0: associated
[ 4550.309992] cfg80211: Calling CRDA to update world regulatory domain
[ 4552.131472] usb 2-1: USB disconnect, device number 5
[ 4552.136858] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62
[ 4552.525952] usb 2-1: new full-speed USB device number 6 using ohci-pci
[ 4553.274079] cfg80211: World regulatory domain updated:
[ 4553.274098] cfg80211:  DFS Master region: unset
[ 4553.274102] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4553.274108] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4553.274112] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4553.274115] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4553.274121] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4553.274126] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4553.274130] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4553.274134] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4553.274138] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4553.418036] usb 2-1: New USB device found, idVendor=05ac, idProduct=8205
[ 4553.418051] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4662.485267] usbcore: deregistering interface driver appletouch
[ 4662.490848] appletouch 2-2:1.1: input: appletouch disconnected
[ 4672.998119] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.1/input/input10
[ 4673.001248] usbcore: registered new interface driver appletouch



-- Package-specific info:
** Version:
Linux version 4.1.0-2-powerpc (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 Debian 4.1.6-1 (2015-08-23)

** Command line:
root=UUID=be0da120-12f5-4e31-80c0-d7fb6bde5ca2 ro radeon.agpmode=-1 modprobe.blacklist=ams

** Not tainted

** Kernel log:
[   52.160376] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   52.160381] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   52.164349] wlan0: associate with 00:14:bf:de:4d:79 (try 1/3)
[   52.166501] wlan0: RX AssocResp from 00:14:bf:de:4d:79 (capab=0x411 status=0 aid=5)
[   52.166946] wlan0: associated
[   52.166991] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  394.396416] fuse init (API version 7.23)
[ 4526.152080] PM: Hibernation mode set to 'shutdown'
[ 4526.310411] PM: Syncing filesystems ... done.
[ 4526.457466] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4526.459215] PM: Basic memory bitmaps created
[ 4526.459223] PM: Preallocating image memory... done (allocated 49144 pages)
[ 4526.951909] PM: Allocated 196576 kbytes in 0.49 seconds (401.17 MB/s)
[ 4526.952173] Freezing remaining freezable tasks ... (elapsed 1.221 seconds) done.
[ 4528.174459] Suspending console(s) (use no_console_suspend to debug)
[ 4528.174823] wlan0: deauthenticating from 00:14:bf:de:4d:79 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4528.186171] queueing ieee80211 work while going to suspend
[ 4528.226070] cfg80211: Calling CRDA to update world regulatory domain
[ 4528.227403] gem 0002:24:0f.0 eth0: suspending, WakeOnLan disabled
[ 4531.381876] cfg80211: Calling CRDA to update world regulatory domain
[ 4534.533779] cfg80211: Calling CRDA to update world regulatory domain
[ 4537.685697] cfg80211: Calling CRDA to update world regulatory domain
[ 4540.837610] cfg80211: Calling CRDA to update world regulatory domain
[ 4543.188013] PM: freeze of devices complete after 15013.688 msecs
[ 4543.188586] PM: late freeze of devices complete after 0.565 msecs
[ 4543.189149] PM: noirq freeze of devices complete after 0.558 msecs
[ 4543.189479] PM: Creating hibernation image:
[ 4543.224396] PM: Need to copy 55021 pages
[ 4543.224403] PM: Normal pages needed: 55021 + 1024, available pages: 76038
[ 4543.266338] PM: noirq restore of devices complete after 76.282 msecs
[ 4543.266657] PM: early restore of devices complete after 0.277 msecs
[ 4543.295196] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 4543.295206] [drm] PCI GART of 512M enabled (table at 0x000000001D580000).
[ 4543.295224] radeon 0000:00:10.0: WB enabled
[ 4543.295233] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000098000000 and cpu addr 0xde716000
[ 4543.295314] [drm] radeon: ring at 0x0000000098001000
[ 4543.295350] [drm] ring test succeeded in 4 usecs
[ 4543.295389] [drm] ib test succeeded in 0 usecs
[ 4543.707769] sd 0:0:0:0: [sda] Starting disk
[ 4543.972806] usb usb2: root hub lost power or was reset
[ 4543.992378] usb usb3: root hub lost power or was reset
[ 4544.011935] usb usb4: root hub lost power or was reset
[ 4544.012007] usb usb1: root hub lost power or was reset
[ 4544.012470] sungem_phy: PHY ID: 1410cc2, addr: 0
[ 4544.012523] gem 0002:24:0f.0 eth0: Found Marvell 88E1111 PHY
[ 4544.012838] cfg80211: Calling CRDA to update world regulatory domain
[ 4544.778424] ata1.00: configured for UDMA/100
[ 4544.994139] usb 2-2: reset full-speed USB device number 3 using ohci-pci
[ 4545.286117] usb 2-1: reset full-speed USB device number 4 using ohci-pci
[ 4545.542002] usb 2-1: device firmware changed
[ 4545.698509] adb: starting probe task...
[ 4545.698518] adb: finished probe task...
[ 4545.930559] ata2.00: configured for MWDMA2
[ 4545.962095] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 4546.058215] PM: restore of devices complete after 2763.311 msecs
[ 4546.068223] PM: Image restored successfully.
[ 4546.068240] PM: Basic memory bitmaps freed
[ 4546.068244] Restarting tasks ... 
[ 4546.068642] usb 2-1: USB disconnect, device number 4
[ 4546.072099] done.
[ 4546.206167] usb 2-1: new full-speed USB device number 5 using ohci-pci
[ 4546.531032] usb 2-1: New USB device found, idVendor=05ac, idProduct=1000
[ 4546.531044] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4546.552281] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/0003:05AC:1000.0005/input/input8
[ 4546.606318] hid-generic 0003:05AC:1000.0005: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
[ 4546.628165] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/0003:05AC:1000.0006/input/input9
[ 4546.628423] hid-generic 0003:05AC:1000.0006: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
[ 4547.158086] cfg80211: Calling CRDA to update world regulatory domain
[ 4549.978289] wlan0: authenticate with 00:14:bf:de:4d:79
[ 4549.990112] wlan0: send auth to 00:14:bf:de:4d:79 (try 1/3)
[ 4549.991640] wlan0: authenticated
[ 4549.991691] b43 ssb0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 4549.991697] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4549.991702] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4549.994001] wlan0: associate with 00:14:bf:de:4d:79 (try 1/3)
[ 4549.996443] wlan0: RX AssocResp from 00:14:bf:de:4d:79 (capab=0x411 status=0 aid=5)
[ 4549.996876] wlan0: associated
[ 4550.309992] cfg80211: Calling CRDA to update world regulatory domain
[ 4552.131472] usb 2-1: USB disconnect, device number 5
[ 4552.136858] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62
[ 4552.525952] usb 2-1: new full-speed USB device number 6 using ohci-pci
[ 4553.274079] cfg80211: World regulatory domain updated:
[ 4553.274098] cfg80211:  DFS Master region: unset
[ 4553.274102] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4553.274108] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4553.274112] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4553.274115] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4553.274121] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4553.274126] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4553.274130] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4553.274134] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4553.274138] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4553.418036] usb 2-1: New USB device found, idVendor=05ac, idProduct=8205
[ 4553.418051] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4662.485267] usbcore: deregistering interface driver appletouch
[ 4662.490848] appletouch 2-2:1.1: input: appletouch disconnected
[ 4672.998119] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.1/input/input10
[ 4673.001248] usbcore: registered new interface driver appletouch
[ 4839.784472] apt-cache[9514]: unhandled signal 11 at 19ee8000 nip 20423c10 lr 20423c2c code 30001
[ 4944.556985] apt-cache[9707]: unhandled signal 11 at 19ef0000 nip 203ccc10 lr 203ccc2c code 30001

** Model information
revision	: 1.2 (pvr 8003 0102)
platform	: PowerMac
model		: PowerBook5,6
machine		: PowerBook5,6
motherboard	: PowerBook5,6 MacRISC3 Power Macintosh 

** Loaded modules:
appletouch
fuse
bnep
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
btusb
btbcm
btintel
bluetooth
arc4
b43
joydev
bcma
radeon
mac80211
cfg80211
evdev
ttm
drm_kms_helper
drm
rfkill
rng_core
sg
yenta_socket
pcmcia_rsrc
snd_aoa_codec_tas
snd_aoa_fabric_layout
snd_aoa
i2c_dev
snd_aoa_i2sbus
snd_aoa_soundbus
snd_pcm
snd_timer
snd
soundcore
therm_adt746x
parport_pc
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
hid_apple
hid_generic
usbhid
hid
ohci_pci
ehci_pci
ohci_hcd
ehci_hcd
firewire_ohci
firewire_core
crc_itu_t
sungem
sungem_phy
sd_mod
ssb
usbcore
usb_common
sr_mod
cdrom
mmc_core
pcmcia
pcmcia_core

** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Inc. UniNorth 2 AGP [106b:0034]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 16, Cache Line Size: 32 bytes
	Capabilities: <access denied>
	Kernel driver in use: agpgart-uninorth

0000:00:10.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV350/M10 / RV360/M11 [Mobility Radeon 9600 (PRO) / 9700] [1002:4e50] (prog-if 00 [VGA controller])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV350/M10 / RV360/M11 [Mobility Radeon 9600 (PRO) / 9700] [1002:4e50]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 255 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 48
	Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 0400 [size=256]
	Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at b0020000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon

0001:10:0b.0 Host bridge [0600]: Apple Inc. UniNorth 2 PCI [106b:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 16, Cache Line Size: 32 bytes

0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
	Subsystem: Apple Inc. AirPort Extreme [106b:004e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16
	Interrupt: pin A routed to IRQ 52
	Region 0: Memory at a0006000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: b43-pci-bridge

0001:10:13.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 53
	Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=10, secondary=11, subordinate=14, sec-latency=176
	Memory window 0: 84000000-87ffffff (prefetchable)
	Memory window 1: 88000000-8bffffff
	I/O window 0: 00001000-000010ff
	I/O window 1: 00001100-000011ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Capabilities: <access denied>
	Kernel driver in use: yenta_cardbus

0001:10:17.0 Unassigned class [ff00]: Apple Inc. KeyLargo/Intrepid Mac I/O [106b:003e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16, Cache Line Size: 32 bytes
	Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
	Kernel driver in use: macio

0001:10:19.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=4K]

0001:10:1a.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at a0003000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci

0001:10:1b.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation USB Controller [1033:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 63
	Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci-pci

0001:10:1b.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation USB Controller [1033:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 63
	Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci-pci

0001:10:1b.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0] (rev 04) (prog-if 20 [EHCI])
	Subsystem: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 63
	Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

0002:24:0b.0 Host bridge [0600]: Apple Inc. UniNorth 2 Internal PCI [106b:0036]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 16, Cache Line Size: 32 bytes

0002:24:0d.0 Unassigned class [ff00]: Apple Inc. UniNorth/Intrepid ATA/100 [106b:003b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin ? routed to IRQ 39
	Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
	Kernel driver in use: pata-pci-macio

0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI])
	Subsystem: Apple Inc. iBook G4 2004 [106b:5811]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

0002:24:0f.0 Ethernet controller [0200]: Apple Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
	Expansion ROM at f5100000 [disabled] [size=1M]
	Kernel driver in use: gem


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 05ac:020e Apple, Inc. Internal Keyboard/Trackpad (ANSI)
Bus 002 Device 006: ID 05ac:8205 Apple, Inc. Bluetooth HCI
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: stretch/sid
Architecture: powerpc (ppc)

Kernel: Linux 4.1.0-2-powerpc
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.1.0-2-powerpc depends on:
ii  debconf [debconf-2.0]                   1.5.57
ii  initramfs-tools [linux-initramfs-tool]  0.120
ii  kmod                                    21-1
ii  linux-base                              4.0

Versions of packages linux-image-4.1.0-2-powerpc recommends:
ii  firmware-linux-free  3.4

Versions of packages linux-image-4.1.0-2-powerpc suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-4.1           <none>
pn  mkvmlinuz               <none>

Versions of packages linux-image-4.1.0-2-powerpc is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.44
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-4.1.0-2-powerpc/postinst/depmod-error-initrd-4.1.0-2-powerpc: false
  linux-image-4.1.0-2-powerpc/prerm/removing-running-kernel-4.1.0-2-powerpc: true
  linux-image-4.1.0-2-powerpc/postinst/mips-initrd-4.1.0-2-powerpc:


Reply to: