Bug#798102: linux-image-4.1.0-2-powerpc: Lots of kworker activity after wake from hibernate on Powerbook
Package: src:linux
Version: 4.1.6-1
Severity: normal
Dear Maintainer,
After waking from hibernate, I get lots of kworker activity that makes my
fans kick in. Top shows a process called kworker/0:3 always active using
around 3% cpu, and Powertop shows a process using 320 ms/s with the Category
Kwork and the Description ams_worker (Powertop also shows about 33% cpu usage).
I assume ams stands for Apple Motion Sensor, and when I unload the module
"ams" everything returns to normal and my fans quiet down.
This is on an aluminum Powerbook (PowerBook5,6).
lspci -nn, lspci -v, and dmesg are below.
Regards,
Dan
~$ lspci -nn
0000:00:0b.0 Host bridge [0600]: Apple Inc. UniNorth 2 AGP [106b:0034]
0000:00:10.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV350/M10 / RV360/M11 [Mobility Radeon 9600 (PRO) / 9700] [1002:4e50]
0001:10:0b.0 Host bridge [0600]: Apple Inc. UniNorth 2 PCI [106b:0035]
0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
0001:10:13.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
0001:10:17.0 Unassigned class [ff00]: Apple Inc. KeyLargo/Intrepid Mac I/O [106b:003e]
0001:10:19.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f]
0001:10:1a.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f]
0001:10:1b.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43)
0001:10:1b.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43)
0001:10:1b.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0] (rev 04)
0002:24:0b.0 Host bridge [0600]: Apple Inc. UniNorth 2 Internal PCI [106b:0036]
0002:24:0d.0 Unassigned class [ff00]: Apple Inc. UniNorth/Intrepid ATA/100 [106b:003b]
0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Inc. UniNorth 2 FireWire [106b:0031] (rev 81)
0002:24:0f.0 Ethernet controller [0200]: Apple Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
~$ lspci -v
0000:00:0b.0 Host bridge: Apple Inc. UniNorth 2 AGP
Flags: bus master, 66MHz, medium devsel, latency 16
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
0000:00:10.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV350/M10 / RV360/M11 [Mobility Radeon 9600 (PRO) / 9700] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV350/M10 / RV360/M11 [Mobility Radeon 9600 (PRO) / 9700]
Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 48
Memory at b8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 0400 [size=256]
Memory at b0000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at b0020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
0001:10:0b.0 Host bridge: Apple Inc. UniNorth 2 PCI
Flags: bus master, 66MHz, medium devsel, latency 16
0001:10:12.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Subsystem: Apple Inc. AirPort Extreme
Flags: bus master, fast devsel, latency 16, IRQ 52
Memory at a0006000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
0001:10:13.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
Flags: bus master, medium devsel, latency 168, IRQ 53
Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=10, secondary=11, subordinate=14, sec-latency=176
Memory window 0: 84000000-87ffffff (prefetchable)
Memory window 1: 88000000-8bffffff
I/O window 0: 00001000-000010ff
I/O window 1: 00001100-000011ff
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
0001:10:17.0 Unassigned class [ff00]: Apple Inc. KeyLargo/Intrepid Mac I/O
Flags: bus master, medium devsel, latency 16
Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:10:19.0 USB controller: Apple Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI])
Flags: medium devsel, IRQ 28
Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=4K]
0001:10:1a.0 USB controller: Apple Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 16, IRQ 29
Memory at a0003000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
0001:10:1b.0 USB controller: NEC Corporation OHCI USB Controller (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller
Flags: bus master, medium devsel, latency 16, IRQ 63
Memory at a0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
0001:10:1b.1 USB controller: NEC Corporation OHCI USB Controller (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller
Flags: bus master, medium devsel, latency 16, IRQ 63
Memory at a0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
0001:10:1b.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation uPD72010x USB 2.0 Controller
Flags: bus master, medium devsel, latency 16, IRQ 63
Memory at a0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
0002:24:0b.0 Host bridge: Apple Inc. UniNorth 2 Internal PCI
Flags: bus master, 66MHz, medium devsel, latency 16
0002:24:0d.0 Unassigned class [ff00]: Apple Inc. UniNorth/Intrepid ATA/100
Flags: bus master, medium devsel, latency 32, IRQ 39
Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: pata-pci-macio
0002:24:0e.0 FireWire (IEEE 1394): Apple Inc. UniNorth 2 FireWire (rev 81) (prog-if 10 [OHCI])
Subsystem: Apple Inc. iBook G4 2004
Flags: bus master, medium devsel, latency 64, IRQ 40
Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0002:24:0f.0 Ethernet controller: Apple Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)
Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 41
Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
Kernel driver in use: gem
~$ dmesg
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 512MB; using 1024kB for hash table (at cff00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.0-2-powerpc (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 Debian 4.1.6-1 (2015-08-23)
[ 0.000000] Found initrd at 0xc1600000:0xc2585000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: PowerBook G4 15"
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x00000000b0000000..0x00000000bfffffff -> 0x00000000b0000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x00000000afffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1318, gen1=1319
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c077b5c8, node_mem_map dfb5b000
[ 0.000000] DMA zone: 1152 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 131072 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: root=UUID=be0da120-12f5-4e31-80c0-d7fb6bde5ca2 ro radeon.agpmode=-1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 492972K/524288K available (5396K kernel code, 472K rwdata, 1460K rodata, 412K init, 1406K bss, 31316K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfde27000..0xff800000 : early ioremap
[ 0.000000] * 0xe1000000..0xfde27000 : vmalloc & ioremap
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 18.432000 MHz
[ 0.000000] time_init: processor frequency = 1499.999994 MHz
[ 0.000013] clocksource timebase: mask: 0xffffffffffffffff max_cycles: 0x440407933, max_idle_ns: 440795202532 ns
[ 0.000425] clocksource: timebase mult[3640e38e] shift[24] registered
[ 0.000774] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0]
[ 0.001363] Console: colour dummy device 80x25
[ 0.001680] console [tty0] enabled
[ 0.001983] bootconsole [udbg0] disabled
[ 0.002701] pid_max: default: 32768 minimum: 301
[ 0.002800] Security Framework initialized
[ 0.002858] AppArmor: AppArmor disabled by boot time parameter
[ 0.002874] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002946] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.002966] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.003599] Initializing cgroup subsys blkio
[ 0.003630] Initializing cgroup subsys memory
[ 0.003659] Initializing cgroup subsys devices
[ 0.003680] Initializing cgroup subsys freezer
[ 0.003703] Initializing cgroup subsys net_cls
[ 0.003723] Initializing cgroup subsys perf_event
[ 0.003742] Initializing cgroup subsys net_prio
[ 0.003795] ftrace: allocating 18610 entries in 55 pages
[ 0.029409] MPC7450 family performance monitor hardware support registered
[ 0.031235] devtmpfs: initialized
[ 0.031806] device-tree: Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.037988] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.038625] NET: Registered protocol family 16
[ 0.039868] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.039890] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1
[ 0.039921] channel 0 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@0
[ 0.040037] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.040060] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0
[ 0.040121] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.040139] channel 1 bus <multibus>
[ 0.040154] channel 2 bus <multibus>
[ 0.040684] PCI: Probing PCI hardware
[ 0.040861] PCI host bridge to bus 0000:00
[ 0.040890] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff])
[ 0.040920] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.040943] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xbfffffff]
[ 0.040966] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.040989] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.041033] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000
[ 0.041356] pci 0000:00:10.0: [1002:4e50] type 00 class 0x030000
[ 0.041383] pci 0000:00:10.0: reg 0x10: [mem 0xb8000000-0xbfffffff pref]
[ 0.041397] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff]
[ 0.041411] pci 0000:00:10.0: reg 0x18: [mem 0xb0000000-0xb000ffff]
[ 0.041441] pci 0000:00:10.0: reg 0x30: [mem 0xb0020000-0xb003ffff pref]
[ 0.041478] pci 0000:00:10.0: supports D1 D2
[ 0.041698] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.041862] PCI host bridge to bus 0001:10
[ 0.041886] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff]
[ 0.041907] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.041928] pci_bus 0001:10: root bus resource [mem 0x80000000-0xafffffff]
[ 0.041950] pci_bus 0001:10: root bus resource [bus 10-ff]
[ 0.041971] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff
[ 0.042008] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000
[ 0.042240] pci 0001:10:12.0: [14e4:4320] type 00 class 0x028000
[ 0.042262] pci 0001:10:12.0: reg 0x10: [mem 0xa0006000-0xa0007fff]
[ 0.042323] pci 0001:10:12.0: supports D1 D2
[ 0.042331] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.042539] pci 0001:10:13.0: [104c:ac56] type 02 class 0x060700
[ 0.042563] pci 0001:10:13.0: reg 0x10: [mem 0xa0004000-0xa0004fff]
[ 0.042598] pci 0001:10:13.0: supports D1 D2
[ 0.042606] pci 0001:10:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.042810] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000
[ 0.042831] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.043053] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310
[ 0.043072] pci 0001:10:19.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.043269] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310
[ 0.043288] pci 0001:10:1a.0: reg 0x10: [mem 0xa0003000-0xa0003fff]
[ 0.043498] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310
[ 0.043519] pci 0001:10:1b.0: reg 0x10: [mem 0xa0002000-0xa0002fff]
[ 0.043581] pci 0001:10:1b.0: supports D1 D2
[ 0.043589] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.043788] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310
[ 0.043809] pci 0001:10:1b.1: reg 0x10: [mem 0xa0001000-0xa0001fff]
[ 0.043870] pci 0001:10:1b.1: supports D1 D2
[ 0.043878] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.044079] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.044101] pci 0001:10:1b.2: reg 0x10: [mem 0xa0000000-0xa00000ff]
[ 0.044162] pci 0001:10:1b.2: supports D1 D2
[ 0.044170] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.044551] pci 0001:10:13.0: Primary bus is hard wired to 0
[ 0.044576] pci 0001:10:13.0: bridge configuration invalid ([bus 01-01]), reconfiguring
[ 0.044739] pci_bus 0001:11: busn_res: [bus 11-ff] end is updated to 14
[ 0.044753] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 14
[ 0.044915] PCI host bridge to bus 0002:24
[ 0.044939] pci_bus 0002:24: root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff])
[ 0.044968] pci_bus 0002:24: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.044990] pci_bus 0002:24: root bus resource [bus 24-ff]
[ 0.045010] pci_bus 0002:24: busn_res: [bus 24-ff] end is updated to ff
[ 0.045046] pci 0002:24:0b.0: [106b:0036] type 00 class 0x060000
[ 0.045268] pci 0002:24:0d.0: [106b:003b] type 00 class 0xff0000
[ 0.045286] pci 0002:24:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff]
[ 0.045485] pci 0002:24:0e.0: [106b:0031] type 00 class 0x0c0010
[ 0.045504] pci 0002:24:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff]
[ 0.045554] pci 0002:24:0e.0: supports D1 D2
[ 0.045562] pci 0002:24:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.045760] pci 0002:24:0f.0: [106b:0032] type 00 class 0x020000
[ 0.045780] pci 0002:24:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff]
[ 0.045818] pci 0002:24:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref]
[ 0.046093] pci_bus 0002:24: busn_res: [bus 24-ff] end is updated to 24
[ 0.046204] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff]
[ 0.046223] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff]
[ 0.046231] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.046240] pci_bus 0000:00: resource 6 [mem 0xb0000000-0xbfffffff]
[ 0.046267] pci 0001:10:13.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.046278] pci 0001:10:13.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.046288] pci 0001:10:13.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.046298] pci 0001:10:13.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.046308] pci 0001:10:13.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[ 0.046318] pci 0001:10:13.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[ 0.046327] pci 0001:10:13.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[ 0.046337] pci 0001:10:13.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[ 0.046353] pci 0001:10:13.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.046385] pci 0001:10:13.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.046407] pci 0001:10:13.0: BAR 13: assigned [io 0x1000-0x10ff]
[ 0.046428] pci 0001:10:13.0: BAR 14: assigned [io 0x1100-0x11ff]
[ 0.046451] pci 0001:10:13.0: CardBus bridge to [bus 11-14]
[ 0.046471] pci 0001:10:13.0: bridge window [io 0x1000-0x10ff]
[ 0.046492] pci 0001:10:13.0: bridge window [io 0x1100-0x11ff]
[ 0.046514] pci 0001:10:13.0: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.046542] pci 0001:10:13.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.046564] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff]
[ 0.046573] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.046581] pci_bus 0001:10: resource 6 [mem 0x80000000-0xafffffff]
[ 0.046590] pci_bus 0001:11: resource 0 [io 0x1000-0x10ff]
[ 0.046598] pci_bus 0001:11: resource 1 [io 0x1100-0x11ff]
[ 0.046606] pci_bus 0001:11: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.046615] pci_bus 0001:11: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.046626] pci_bus 0002:24: resource 4 [io 0xff7fe000-0xffffdfff]
[ 0.046635] pci_bus 0002:24: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.050810] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.050856] vgaarb: loaded
[ 0.050869] vgaarb: bridge control possible 0000:00:10.0
[ 0.051216] SCSI subsystem initialized
[ 0.051427] libata version 3.00 loaded.
[ 0.052194] Switched to clocksource timebase
[ 0.087265] NET: Registered protocol family 2
[ 0.087900] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.087956] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.088003] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.088117] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.088148] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.088363] NET: Registered protocol family 1
[ 0.088475] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 0.088501] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.088535] pci 0001:10:1a.0: enabling device (0000 -> 0002)
[ 0.144242] pci 0001:10:1b.0: enabling device (0000 -> 0002)
[ 0.200219] pci 0001:10:1b.1: enabling device (0000 -> 0002)
[ 0.256217] pci 0001:10:1b.2: enabling device (0004 -> 0006)
[ 0.256271] PCI: CLS mismatch (32 != 1020), using 32 bytes
[ 0.256474] Unpacking initramfs...
[ 1.176053] Freeing initrd memory: 15892K (c1600000 - c2585000)
[ 1.176564] Thermal assist unit not available
[ 1.177569] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 1.177664] audit: initializing netlink subsys (disabled)
[ 1.177743] audit: type=2000 audit(1441463547.164:1): initialized
[ 1.178575] zpool: loaded
[ 1.178775] VFS: Disk quotas dquot_6.6.0
[ 1.178828] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.180258] alg: No test for stdrng (krng)
[ 1.180378] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.180515] io scheduler noop registered
[ 1.180539] io scheduler deadline registered
[ 1.180582] io scheduler cfq registered (default)
[ 1.181377] Using unsupported 1280x854 ATY,Jasper_A at b8008000, depth=8, pitch=1280
[ 1.203418] Console: switching to colour frame buffer device 160x53
[ 1.224963] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,JasperParent@10/ATY,Jasper_A@0
[ 1.225312] Using unsupported 640x480 ATY,Jasper_B at ba008000, depth=8, pitch=768
[ 1.225574] checking generic (b8008000 10ae00) vs hw (ba008000 5a000)
[ 1.225754] fb1: Open Firmware frame buffer device on /pci@f0000000/ATY,JasperParent@10/ATY,Jasper_B@1
[ 1.226217] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.227422] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 1.227695] Serial: MPC52xx PSC UART driver
[ 1.227890] Generic non-volatile memory driver v1.1
[ 1.228152] Linux agpgart interface v0.103
[ 1.228346] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 1.230015] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 1.230342] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 1.230777] MacIO PCI driver attached to Intrepid chipset
[ 1.232434] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 1.233175] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 1.234442] pata-pci-macio 0002:24:0d.0: enabling device (0000 -> 0002)
[ 1.234786] adb: starting probe task...
[ 1.234915] adb: finished probe task...
[ 1.248234] pata-pci-macio 0002:24:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 1.249253] scsi host0: pata_macio
[ 1.249572] ata1: PATA max UDMA/100 irq 39
[ 1.414286] ata1.00: ATA-6: ST940110A, 3.07, max UDMA/100
[ 1.414464] ata1.00: 78140160 sectors, multi 16: LBA48
[ 1.429094] ata1.00: configured for UDMA/100
[ 1.429567] scsi 0:0:0:0: Direct-Access ATA ST940110A 3.07 PQ: 0 ANSI: 5
[ 2.268208] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.269211] scsi host1: pata_macio
[ 2.269528] ata2: PATA max MWDMA2 irq 24
[ 2.270011] mousedev: PS/2 mouse device common for all mice
[ 2.278050] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 2.285717] PowerMac i2c bus pmu 2 registered
[ 2.293231] PowerMac i2c bus pmu 1 registered
[ 2.300647] PowerMac i2c bus mac-io 0 registered
[ 2.308220] PowerMac i2c bus uni-n 0 registered
[ 2.315808] PowerMac i2c bus uni-n 1 registered
[ 2.323533] Registering PowerMac CPU frequency driver
[ 2.330948] Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz
[ 2.344316] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.351683] NET: Registered protocol family 10
[ 2.359287] mip6: Mobile IPv6
[ 2.366385] NET: Registered protocol family 17
[ 2.373451] mpls_gso: MPLS GSO support
[ 2.380914] registered taskstats version 1
[ 2.388495] input: PMU as /devices/virtual/input/input0
[ 2.395878] rtc-generic rtc-generic: setting system clock to 2015-09-05 14:32:29 UTC (1441463549)
[ 2.403337] PM: Hibernation image not present or could not be loaded.
[ 2.440570] ata2.00: ATAPI: MATSHITADVD-R UJ-845E, DMP2, max UDMA/66
[ 2.460559] ata2.00: configured for MWDMA2
[ 2.472229] scsi 1:0:0:0: CD-ROM MATSHITA DVD-R UJ-845E DMP2 PQ: 0 ANSI: 5
[ 2.485707] Freeing unused kernel memory: 412K (c06b6000 - c071d000)
[ 2.557939] random: systemd-udevd urandom read with 0 bits of entropy available
[ 2.693726] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.701264] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.711279] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[ 2.747004] usbcore: registered new interface driver usbfs
[ 2.759521] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.774524] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.784340] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00
[ 2.791515] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 2.791522] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 2.791527] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 2.791533] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 2.791539] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 2.796405] sd 0:0:0:0: [sda] Write Protect is off
[ 2.803599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.808279] usbcore: registered new interface driver hub
[ 2.815633] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.816851] gem 0002:24:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:36:97:4c
[ 2.827633] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
[ 2.836571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.848260] usbcore: registered new device driver usb
[ 2.859845] firewire_ohci 0002:24:0e.0: enabling device (0000 -> 0002)
[ 2.870450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.906295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.915963] ehci-pci: EHCI PCI platform driver
[ 2.942278] ehci-pci 0001:10:1b.2: EHCI Host Controller
[ 2.949954] firewire_ohci 0002:24:0e.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 2.983650] ehci-pci 0001:10:1b.2: new USB bus registered, assigned bus number 1
[ 3.009554] ehci-pci 0001:10:1b.2: irq 63, io mem 0xa0000000
[ 3.036261] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 3.045761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.053521] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.061244] usb usb1: Product: EHCI Host Controller
[ 3.068867] usb usb1: Manufacturer: Linux 4.1.0-2-powerpc ehci_hcd
[ 3.076419] usb usb1: SerialNumber: 0001:10:1b.2
[ 3.085210] hub 1-0:1.0: USB hub found
[ 3.092799] hub 1-0:1.0: 5 ports detected
[ 3.102167] ohci-pci: OHCI PCI platform driver
[ 3.115718] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 3.125499] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 3.137080] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.147989] ohci-pci 0001:10:1a.0: OHCI PCI host controller
[ 3.162334] ohci-pci 0001:10:1a.0: new USB bus registered, assigned bus number 2
[ 3.173421] ohci-pci 0001:10:1a.0: irq 29, io mem 0xa0003000
[ 3.255918] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.263713] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.271401] usb usb2: Product: OHCI PCI host controller
[ 3.279032] usb usb2: Manufacturer: Linux 4.1.0-2-powerpc ohci_hcd
[ 3.286712] usb usb2: SerialNumber: 0001:10:1a.0
[ 3.295705] hub 2-0:1.0: USB hub found
[ 3.303584] hub 2-0:1.0: 2 ports detected
[ 3.311623] ohci-pci 0001:10:1b.0: OHCI PCI host controller
[ 3.319448] ohci-pci 0001:10:1b.0: new USB bus registered, assigned bus number 3
[ 3.327137] ohci-pci 0001:10:1b.0: irq 63, io mem 0xa0002000
[ 3.407945] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.415536] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.423047] usb usb3: Product: OHCI PCI host controller
[ 3.430462] usb usb3: Manufacturer: Linux 4.1.0-2-powerpc ohci_hcd
[ 3.437853] usb usb3: SerialNumber: 0001:10:1b.0
[ 3.446401] hub 3-0:1.0: USB hub found
[ 3.453903] hub 3-0:1.0: 3 ports detected
[ 3.461580] firewire_core 0002:24:0e.0: created device fw0: GUID 001124fffe36974c, S800
[ 3.470705] ohci-pci 0001:10:1b.1: OHCI PCI host controller
[ 3.478386] ohci-pci 0001:10:1b.1: new USB bus registered, assigned bus number 4
[ 3.487084] ohci-pci 0001:10:1b.1: irq 63, io mem 0xa0001000
[ 3.577819] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.585097] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.592271] usb usb4: Product: OHCI PCI host controller
[ 3.599415] usb usb4: Manufacturer: Linux 4.1.0-2-powerpc ohci_hcd
[ 3.606588] usb usb4: SerialNumber: 0001:10:1b.1
[ 3.614796] hub 4-0:1.0: USB hub found
[ 3.621738] hub 4-0:1.0: 2 ports detected
[ 3.688219] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 3.999265] usb 2-1: New USB device found, idVendor=05ac, idProduct=1000
[ 4.006058] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.148226] usb 2-2: new full-speed USB device number 3 using ohci-pci
[ 4.331233] usb 2-2: New USB device found, idVendor=05ac, idProduct=020e
[ 4.338022] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.344744] usb 2-2: Product: Apple Internal Keyboard/Trackpad
[ 4.351446] usb 2-2: Manufacturer: Apple Computer
[ 4.395887] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.452993] usbcore: registered new interface driver usbhid
[ 4.459654] usbhid: USB HID core driver
[ 4.470572] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/0003:05AC:1000.0001/input/input1
[ 4.483580] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/0003:05AC:020E.0003/input/input2
[ 4.544658] hid-generic 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
[ 4.553137] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/0003:05AC:1000.0002/input/input3
[ 4.604344] apple 0003:05AC:020E.0003: input,hidraw1: USB HID v1.10 Keyboard [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input0
[ 4.612867] hid-generic 0003:05AC:1000.0002: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
[ 4.623399] input: Apple Computer Apple Internal Keyboard/Trackpad as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.2/0003:05AC:020E.0004/input/input4
[ 4.688587] apple 0003:05AC:020E.0004: input,hidraw3: USB HID v1.10 Device [Apple Computer Apple Internal Keyboard/Trackpad] on usb-0001:10:1a.0-2/input2
[ 4.753068] PM: Starting manual resume from disk
[ 4.761768] PM: Hibernation image partition 8:4 present
[ 4.761772] PM: Looking for hibernation image.
[ 4.777480] PM: Image not found (code -22)
[ 4.777486] PM: Hibernation image not present or could not be loaded.
[ 5.206513] random: nonblocking pool is initialized
[ 8.960454] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.404309] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 10.572534] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 10.587797] systemd[1]: Detected architecture ppc.
[ 10.660257] systemd[1]: Set hostname to <powerbook2>.
[ 12.721515] systemd[1]: Reached target Remote File Systems (Pre).
[ 12.734742] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.746994] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 12.759148] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.771261] systemd[1]: Created slice Root Slice.
[ 12.783281] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.795657] systemd[1]: Created slice System Slice.
[ 12.809827] systemd[1]: Starting Increase datagram queue length...
[ 12.824906] systemd[1]: Created slice system-getty.slice.
[ 12.838731] systemd[1]: Listening on Journal Socket.
[ 12.908410] systemd[1]: Mounting Debug File System...
[ 12.942828] systemd[1]: Starting Load Kernel Modules...
[ 12.961148] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.980127] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 12.998442] systemd[1]: Listening on udev Kernel Socket.
[ 13.015396] systemd[1]: Listening on Journal Audit Socket.
[ 13.032863] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.057865] systemd[1]: Listening on udev Control Socket.
[ 13.075956] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.094519] systemd[1]: Reached target Encrypted Volumes.
[ 13.112962] systemd[1]: Created slice User and Session Slice.
[ 13.131049] systemd[1]: Reached target Slices.
[ 13.246480] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 13.268017] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.753951] lp: driver loaded but no devices found
[ 13.778516] systemd[1]: Mounted Debug File System.
[ 13.808174] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.890132] systemd[1]: Started Increase datagram queue length.
[ 13.918628] systemd[1]: Listening on Syslog Socket.
[ 13.927906] adt746x: version 1 (supported)
[ 13.936335] sensor 0: CPU/INTREPID BOTTOMSIDE
[ 13.944606] sensor 1: CPU BOTTOMSIDE
[ 13.952718] sensor 2: PWR SUPPLY BOTTOMSIDE
[ 13.971812] systemd[1]: Starting Journal Service...
[ 13.991829] adt746x: ADT7467 initializing
[ 14.002174] adt746x: Lowering max temperatures from 81, 80, 87 to 70, 50, 70
[ 14.324931] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 14.337716] systemd[1]: Failed to start Load Kernel Modules.
[ 14.365011] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 14.373322] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 14.390580] systemd[1]: Starting Apply Kernel Variables...
[ 14.438944] systemd[1]: Started Create Static Device Nodes in /dev.
[ 14.471171] systemd[1]: Starting udev Kernel Device Manager...
[ 14.588811] systemd[1]: Started Journal Service.
[ 15.534909] snd-aoa-fabric-layout: Using PMF GPIOs
[ 15.578202] snd-aoa-fabric-layout: can use this codec
[ 15.651920] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a
[ 17.002929] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 17.265157] systemd-journald[144]: Received request to flush runtime journal from PID 1
[ 17.803840] yenta_cardbus 0001:10:13.0: CardBus bridge found [0000:0000]
[ 17.810721] yenta_cardbus 0001:10:13.0: Enabling burst memory read transactions
[ 17.817614] yenta_cardbus 0001:10:13.0: Using CSCINT to route CSC interrupts to PCI
[ 17.824343] yenta_cardbus 0001:10:13.0: Routing CardBus interrupts to PCI
[ 17.831037] yenta_cardbus 0001:10:13.0: TI: mfunc 0x00001002, devctl 0x60
[ 17.981647] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.996390] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 18.052260] yenta_cardbus 0001:10:13.0: ISA IRQ mask 0x0000, PCI irq 53
[ 18.059174] yenta_cardbus 0001:10:13.0: Socket status: 30000087
[ 18.067322] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge window: [io 0x0000-0x7fffff]
[ 18.074640] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge window: [mem 0xf3000000-0xf3ffffff]
[ 18.082373] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf3000000-0xf3ffffff:
[ 18.089425] clean.
[ 18.096090] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0xafffffff]
[ 18.103808] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0xafffffff:
[ 18.110861] excluding 0x80000000-0x807fffff 0x84000000-0x8bffffff 0xa0000000-0xa07fffff
[ 18.223014] [drm] Initialized drm 1.1.0 20060810
[ 18.857493] ams: Found I2C based motion sensor
[ 19.063193] cfg80211: Calling CRDA to update world regulatory domain
[ 19.244402] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x80ffffff:
[ 19.251506] excluding 0x80000000-0x800fffff
[ 19.672471] usb 2-1: USB disconnect, device number 2
[ 19.679579] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62
[ 19.772236] [drm] radeon kernel modesetting enabled.
[ 19.788436] checking generic (b8008000 10ae00) vs hw (b8000000 8000000)
[ 19.788447] fb: switching to radeondrmfb from OFfb ATY,Jasper
[ 19.799723] Console: switching to colour dummy device 80x25
[ 19.800507] checking generic (ba008000 5a000) vs hw (b8000000 8000000)
[ 19.800514] fb: switching to radeondrmfb from OFfb ATY,Jasper
[ 19.801114] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 19.802070] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1002:0x4E50).
[ 19.802096] [drm] Forcing AGP to PCI mode
[ 19.802114] [drm] register mmio base: 0xB0000000
[ 19.802121] [drm] register mmio size: 65536
[ 19.802212] radeon 0000:00:10.0: Invalid ROM contents
[ 19.802236] radeon 0000:00:10.0: Invalid ROM contents
[ 19.802465] [drm:radeon_get_bios [radeon]] *ERROR* Unable to locate a BIOS ROM
[ 19.802495] [drm] Using device-tree clock info
[ 19.802506] [drm] Generation 2 PCI interface, using max accessible memory
[ 19.802521] radeon 0000:00:10.0: VRAM: 128M 0x00000000B8000000 - 0x00000000BFFFFFFF (64M used)
[ 19.802536] radeon 0000:00:10.0: GTT: 512M 0x0000000098000000 - 0x00000000B7FFFFFF
[ 19.802572] [drm] Detected VRAM RAM=128M, BAR=128M
[ 19.802581] [drm] RAM width 128bits DDR
[ 19.802717] [TTM] Zone kernel: Available graphics memory: 255148 kiB
[ 19.802733] [TTM] Initializing pool allocator
[ 19.802810] [drm] radeon: 64M of VRAM memory ready
[ 19.802822] [drm] radeon: 512M of GTT memory ready.
[ 19.802873] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 19.808304] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 19.808344] [drm] PCI GART of 512M enabled (table at 0x000000001B600000).
[ 19.808442] radeon 0000:00:10.0: WB enabled
[ 19.808459] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000098000000 and cpu addr 0xc21e3000
[ 19.808476] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 19.808485] [drm] Driver supports precise vblank timestamp query.
[ 19.808530] [drm] radeon: irq initialized.
[ 19.808554] [drm] Loading R300 Microcode
[ 20.055293] radeon 0000:00:10.0: firmware: direct-loading firmware radeon/R300_cp.bin
[ 20.055731] [drm] radeon: ring at 0x0000000098001000
[ 20.055779] [drm] ring test succeeded in 3 usecs
[ 20.056086] [drm] ib test succeeded in 0 usecs
[ 20.058448] [drm] Connector Table: 3 (powerbook external tmds)
[ 20.058489] [drm] No panel info found in BIOS
[ 20.058504] [drm] Panel info derived from registers
[ 20.058512] [drm] Panel Size 1280x854
[ 20.058681] [drm] No valid Ext TMDS info found in BIOS
[ 20.058806] [drm] No TV DAC info found in BIOS
[ 20.449631] [drm] radeon legacy LVDS backlight initialized
[ 20.449647] [drm] Radeon Display Connectors
[ 20.449655] [drm] Connector 0:
[ 20.449662] [drm] LVDS-1
[ 20.449670] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 20.449678] [drm] Encoders:
[ 20.449685] [drm] LCD1: INTERNAL_LVDS
[ 20.449693] [drm] Connector 1:
[ 20.449699] [drm] DVI-I-1
[ 20.449705] [drm] HPD2
[ 20.449713] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 20.449721] [drm] Encoders:
[ 20.449727] [drm] DFP2: INTERNAL_DVO1
[ 20.449734] [drm] CRT1: INTERNAL_DAC1
[ 20.449741] [drm] Connector 2:
[ 20.449747] [drm] SVIDEO-1
[ 20.449753] [drm] Encoders:
[ 20.449760] [drm] TV1: INTERNAL_DAC2
[ 20.496230] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 20.508353] usb 2-1: new full-speed USB device number 4 using ohci-pci
[ 20.509693] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.1/input/input5
[ 20.510669] usbcore: registered new interface driver appletouch
[ 20.518112] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
[ 20.518161] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
[ 20.532483] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 20.607094] b43 ssb0:0: firmware: direct-loading firmware b43/ucode5.fw
[ 20.608437] b43 ssb0:0: firmware: direct-loading firmware b43/pcm5.fw
[ 20.609765] b43 ssb0:0: firmware: direct-loading firmware b43/b0g0initvals5.fw
[ 20.618191] b43 ssb0:0: firmware: direct-loading firmware b43/b0g0bsinitvals5.fw
[ 21.129474] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 21.131555] [drm] fb mappable at 0xB8040000
[ 21.131583] [drm] vram apper at 0xB8000000
[ 21.131590] [drm] size 4374528
[ 21.131596] [drm] fb depth is 24
[ 21.131603] [drm] pitch is 5120
[ 21.770037] Console: switching to colour frame buffer device 160x53
[ 21.799081] radeon 0000:00:10.0: fb0: radeondrmfb frame buffer device
[ 21.799337] radeon 0000:00:10.0: registered panic notifier
[ 21.799755] [drm] Initialized radeon 2.42.0 20080528 for 0000:00:10.0 on minor 0
[ 21.952259] usb 2-1: New USB device found, idVendor=05ac, idProduct=8205
[ 21.952548] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 22.252778] cfg80211: Calling CRDA to update world regulatory domain
[ 22.288238] Bluetooth: Core ver 2.20
[ 22.288474] NET: Registered protocol family 31
[ 22.288656] Bluetooth: HCI device and connection manager initialized
[ 22.289056] Bluetooth: HCI socket layer initialized
[ 22.289260] Bluetooth: L2CAP socket layer initialized
[ 22.289505] Bluetooth: SCO socket layer initialized
[ 23.078072] usbcore: registered new interface driver btusb
[ 23.252563] sungem_phy: PHY ID: 1410cc2, addr: 0
[ 23.252631] gem 0002:24:0f.0 eth0: Found Marvell 88E1111 PHY
[ 23.253197] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.737546] cfg80211: World regulatory domain updated:
[ 23.737553] cfg80211: DFS Master region: unset
[ 23.737554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 23.737561] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 23.737563] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 23.737565] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 23.737569] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 23.737572] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 23.737574] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 23.737576] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 23.737578] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 24.422900] Adding 749996k swap on /dev/sda4. Priority:-1 extents:1 across:749996k FS
[ 25.726701] RPC: Registered named UNIX socket transport module.
[ 25.736533] RPC: Registered udp transport module.
[ 25.746127] RPC: Registered tcp transport module.
[ 25.755468] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.819224] FS-Cache: Loaded
[ 25.904145] FS-Cache: Netfs 'nfs' registered for caching
[ 26.035577] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 30.001538] input: Mouseemu virtual keyboard as /devices/virtual/input/input6
[ 30.023993] input: Mouseemu virtual mouse as /devices/virtual/input/input7
[ 31.616264] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.624023] Bluetooth: BNEP filters: protocol multicast
[ 31.636491] Bluetooth: BNEP socket layer initialized
[ 39.888246] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 40.008407] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 49.704332] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 49.808363] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 50.280546] sungem_phy: PHY ID: 1410cc2, addr: 0
[ 50.280610] gem 0002:24:0f.0 eth0: Found Marvell 88E1111 PHY
[ 50.281022] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.680214] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 50.780398] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 54.402045] wlan0: authenticate with 00:14:bf:de:4d:79
[ 54.424379] wlan0: send auth to 00:14:bf:de:4d:79 (try 1/3)
[ 54.428073] wlan0: authenticated
[ 54.428133] b43 ssb0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 54.428140] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 54.428144] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 54.429765] wlan0: associate with 00:14:bf:de:4d:79 (try 1/3)
[ 54.431854] wlan0: RX AssocResp from 00:14:bf:de:4d:79 (capab=0x411 status=0 aid=6)
[ 54.432308] wlan0: associated
[ 54.432356] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 68.880332] fuse init (API version 7.23)
[ 341.067290] PM: Hibernation mode set to 'shutdown'
[ 341.228537] PM: Syncing filesystems ... done.
[ 341.371191] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 341.372959] PM: Basic memory bitmaps created
[ 341.372966] PM: Preallocating image memory... done (allocated 49552 pages)
[ 341.956308] PM: Allocated 198208 kbytes in 0.58 seconds (341.73 MB/s)
[ 341.956573] Freezing remaining freezable tasks ... (elapsed 0.728 seconds) done.
[ 342.685625] Suspending console(s) (use no_console_suspend to debug)
[ 342.686046] wlan0: deauthenticating from 00:14:bf:de:4d:79 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 342.705257] queueing ieee80211 work while going to suspend
[ 342.745238] cfg80211: Calling CRDA to update world regulatory domain
[ 342.746480] gem 0002:24:0f.0 eth0: suspending, WakeOnLan disabled
[ 345.897073] cfg80211: Calling CRDA to update world regulatory domain
[ 349.049009] cfg80211: Calling CRDA to update world regulatory domain
[ 352.200950] cfg80211: Calling CRDA to update world regulatory domain
[ 355.352896] cfg80211: Calling CRDA to update world regulatory domain
[ 358.504843] cfg80211: Calling CRDA to update world regulatory domain
[ 361.656815] cfg80211: Calling CRDA to update world regulatory domain
[ 361.707244] PM: freeze of devices complete after 19021.680 msecs
[ 361.707808] PM: late freeze of devices complete after 0.558 msecs
[ 361.708364] PM: noirq freeze of devices complete after 0.551 msecs
[ 361.708667] PM: Creating hibernation image:
[ 361.743654] PM: Need to copy 55456 pages
[ 361.743661] PM: Normal pages needed: 55456 + 1024, available pages: 75603
[ 361.785536] PM: noirq restore of devices complete after 76.327 msecs
[ 361.786260] PM: early restore of devices complete after 0.646 msecs
[ 361.840824] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 361.840837] [drm] PCI GART of 512M enabled (table at 0x000000001B600000).
[ 361.840876] radeon 0000:00:10.0: WB enabled
[ 361.840890] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000098000000 and cpu addr 0xc21e3000
[ 361.841011] [drm] radeon: ring at 0x0000000098001000
[ 361.841063] [drm] ring test succeeded in 1 usecs
[ 361.841123] [drm] ib test succeeded in 0 usecs
[ 362.256439] sd 0:0:0:0: [sda] Starting disk
[ 362.521641] usb usb2: root hub lost power or was reset
[ 362.541229] usb usb3: root hub lost power or was reset
[ 362.560811] usb usb4: root hub lost power or was reset
[ 362.560944] usb usb1: root hub lost power or was reset
[ 362.561457] sungem_phy: PHY ID: 1410cc2, addr: 0
[ 362.561512] gem 0002:24:0f.0 eth0: Found Marvell 88E1111 PHY
[ 363.329999] ata1.00: configured for UDMA/100
[ 363.569399] usb 2-2: reset full-speed USB device number 3 using ohci-pci
[ 363.861365] usb 2-1: reset full-speed USB device number 4 using ohci-pci
[ 364.118438] usb 2-1: device firmware changed
[ 364.278022] adb: starting probe task...
[ 364.278040] adb: finished probe task...
[ 364.513896] ata2.00: configured for MWDMA2
[ 364.545347] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 364.641593] PM: restore of devices complete after 2801.327 msecs
[ 364.652357] PM: Image restored successfully.
[ 364.652391] PM: Basic memory bitmaps freed
[ 364.652399] Restarting tasks ...
[ 364.652963] usb 2-1: USB disconnect, device number 4
[ 364.659016] done.
[ 364.793360] usb 2-1: new full-speed USB device number 5 using ohci-pci
[ 364.809375] cfg80211: Calling CRDA to update world regulatory domain
[ 365.108453] usb 2-1: New USB device found, idVendor=05ac, idProduct=1000
[ 365.108473] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 365.134984] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/0003:05AC:1000.0005/input/input8
[ 365.189823] hid-generic 0003:05AC:1000.0005: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
[ 365.206919] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/0003:05AC:1000.0006/input/input9
[ 365.208132] hid-generic 0003:05AC:1000.0006: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
[ 367.961341] cfg80211: Calling CRDA to update world regulatory domain
[ 370.749398] wlan0: authenticate with 00:14:bf:de:4d:79
[ 370.761706] wlan0: send auth to 00:14:bf:de:4d:79 (try 1/3)
[ 370.763822] wlan0: authenticated
[ 370.763909] b43 ssb0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 370.763919] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 370.763926] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 370.765438] wlan0: associate with 00:14:bf:de:4d:79 (try 1/3)
[ 370.768988] wlan0: RX AssocResp from 00:14:bf:de:4d:79 (capab=0x411 status=0 aid=6)
[ 370.769889] wlan0: associated
[ 371.113260] cfg80211: Calling CRDA to update world regulatory domain
[ 372.848435] usb 2-1: USB disconnect, device number 5
[ 372.858210] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62
[ 373.261227] usb 2-1: new full-speed USB device number 6 using ohci-pci
[ 373.934379] cfg80211: World regulatory domain updated:
[ 373.934408] cfg80211: DFS Master region: unset
[ 373.934414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 373.934423] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 373.934429] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 373.934436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 373.934446] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 373.934455] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 373.934461] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 373.934467] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 373.934475] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 374.135443] usb 2-1: New USB device found, idVendor=05ac, idProduct=8205
[ 374.135467] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
-- Package-specific info:
** Version:
Linux version 4.1.0-2-powerpc (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 Debian 4.1.6-1 (2015-08-23)
** Command line:
root=UUID=be0da120-12f5-4e31-80c0-d7fb6bde5ca2 ro radeon.agpmode=-1
** Not tainted
** Kernel log:
[ 54.428073] wlan0: authenticated
[ 54.428133] b43 ssb0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 54.428140] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 54.428144] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 54.429765] wlan0: associate with 00:14:bf:de:4d:79 (try 1/3)
[ 54.431854] wlan0: RX AssocResp from 00:14:bf:de:4d:79 (capab=0x411 status=0 aid=6)
[ 54.432308] wlan0: associated
[ 54.432356] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 68.880332] fuse init (API version 7.23)
[ 341.067290] PM: Hibernation mode set to 'shutdown'
[ 341.228537] PM: Syncing filesystems ... done.
[ 341.371191] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 341.372959] PM: Basic memory bitmaps created
[ 341.372966] PM: Preallocating image memory... done (allocated 49552 pages)
[ 341.956308] PM: Allocated 198208 kbytes in 0.58 seconds (341.73 MB/s)
[ 341.956573] Freezing remaining freezable tasks ... (elapsed 0.728 seconds) done.
[ 342.685625] Suspending console(s) (use no_console_suspend to debug)
[ 342.686046] wlan0: deauthenticating from 00:14:bf:de:4d:79 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 342.705257] queueing ieee80211 work while going to suspend
[ 342.745238] cfg80211: Calling CRDA to update world regulatory domain
[ 342.746480] gem 0002:24:0f.0 eth0: suspending, WakeOnLan disabled
[ 345.897073] cfg80211: Calling CRDA to update world regulatory domain
[ 349.049009] cfg80211: Calling CRDA to update world regulatory domain
[ 352.200950] cfg80211: Calling CRDA to update world regulatory domain
[ 355.352896] cfg80211: Calling CRDA to update world regulatory domain
[ 358.504843] cfg80211: Calling CRDA to update world regulatory domain
[ 361.656815] cfg80211: Calling CRDA to update world regulatory domain
[ 361.707244] PM: freeze of devices complete after 19021.680 msecs
[ 361.707808] PM: late freeze of devices complete after 0.558 msecs
[ 361.708364] PM: noirq freeze of devices complete after 0.551 msecs
[ 361.708667] PM: Creating hibernation image:
[ 361.743654] PM: Need to copy 55456 pages
[ 361.743661] PM: Normal pages needed: 55456 + 1024, available pages: 75603
[ 361.785536] PM: noirq restore of devices complete after 76.327 msecs
[ 361.786260] PM: early restore of devices complete after 0.646 msecs
[ 361.840824] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 361.840837] [drm] PCI GART of 512M enabled (table at 0x000000001B600000).
[ 361.840876] radeon 0000:00:10.0: WB enabled
[ 361.840890] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000098000000 and cpu addr 0xc21e3000
[ 361.841011] [drm] radeon: ring at 0x0000000098001000
[ 361.841063] [drm] ring test succeeded in 1 usecs
[ 361.841123] [drm] ib test succeeded in 0 usecs
[ 362.256439] sd 0:0:0:0: [sda] Starting disk
[ 362.521641] usb usb2: root hub lost power or was reset
[ 362.541229] usb usb3: root hub lost power or was reset
[ 362.560811] usb usb4: root hub lost power or was reset
[ 362.560944] usb usb1: root hub lost power or was reset
[ 362.561457] sungem_phy: PHY ID: 1410cc2, addr: 0
[ 362.561512] gem 0002:24:0f.0 eth0: Found Marvell 88E1111 PHY
[ 363.329999] ata1.00: configured for UDMA/100
[ 363.569399] usb 2-2: reset full-speed USB device number 3 using ohci-pci
[ 363.861365] usb 2-1: reset full-speed USB device number 4 using ohci-pci
[ 364.118438] usb 2-1: device firmware changed
[ 364.278022] adb: starting probe task...
[ 364.278040] adb: finished probe task...
[ 364.513896] ata2.00: configured for MWDMA2
[ 364.545347] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 364.641593] PM: restore of devices complete after 2801.327 msecs
[ 364.652357] PM: Image restored successfully.
[ 364.652391] PM: Basic memory bitmaps freed
[ 364.652399] Restarting tasks ...
[ 364.652963] usb 2-1: USB disconnect, device number 4
[ 364.659016] done.
[ 364.793360] usb 2-1: new full-speed USB device number 5 using ohci-pci
[ 364.809375] cfg80211: Calling CRDA to update world regulatory domain
[ 365.108453] usb 2-1: New USB device found, idVendor=05ac, idProduct=1000
[ 365.108473] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 365.134984] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/0003:05AC:1000.0005/input/input8
[ 365.189823] hid-generic 0003:05AC:1000.0005: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
[ 365.206919] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/0003:05AC:1000.0006/input/input9
[ 365.208132] hid-generic 0003:05AC:1000.0006: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
[ 367.961341] cfg80211: Calling CRDA to update world regulatory domain
[ 370.749398] wlan0: authenticate with 00:14:bf:de:4d:79
[ 370.761706] wlan0: send auth to 00:14:bf:de:4d:79 (try 1/3)
[ 370.763822] wlan0: authenticated
[ 370.763909] b43 ssb0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 370.763919] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 370.763926] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 370.765438] wlan0: associate with 00:14:bf:de:4d:79 (try 1/3)
[ 370.768988] wlan0: RX AssocResp from 00:14:bf:de:4d:79 (capab=0x411 status=0 aid=6)
[ 370.769889] wlan0: associated
[ 371.113260] cfg80211: Calling CRDA to update world regulatory domain
[ 372.848435] usb 2-1: USB disconnect, device number 5
[ 372.858210] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62
[ 373.261227] usb 2-1: new full-speed USB device number 6 using ohci-pci
[ 373.934379] cfg80211: World regulatory domain updated:
[ 373.934408] cfg80211: DFS Master region: unset
[ 373.934414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 373.934423] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 373.934429] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 373.934436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 373.934446] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 373.934455] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 373.934461] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 373.934467] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 373.934475] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 374.135443] usb 2-1: New USB device found, idVendor=05ac, idProduct=8205
[ 374.135467] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3889.170339] apt-cache[4102]: unhandled signal 11 at 1a4ab000 nip 2020bc10 lr 2020bc2c code 30001
[ 4408.861522] apt-cache[4462]: unhandled signal 11 at 1a30d000 nip 203a3c10 lr 203a3c2c code 30001
** Model information
revision : 1.2 (pvr 8003 0102)
platform : PowerMac
model : PowerBook5,6
machine : PowerBook5,6
motherboard : PowerBook5,6 MacRISC3 Power Macintosh
** Loaded modules:
cpufreq_stats
fuse
bnep
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
btusb
btbcm
btintel
bluetooth
arc4
joydev
appletouch
b43
radeon
bcma
mac80211
cfg80211
evdev
ams
ttm
input_polldev
drm_kms_helper
rfkill
rng_core
drm
sg
yenta_socket
pcmcia_rsrc
snd_aoa_codec_tas
snd_aoa_fabric_layout
snd_aoa
snd_aoa_i2sbus
snd_aoa_soundbus
snd_pcm
snd_timer
snd
soundcore
therm_adt746x
parport_pc
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
hid_apple
usbhid
hid
ohci_pci
ehci_pci
ohci_hcd
ehci_hcd
firewire_ohci
sungem
sungem_phy
firewire_core
crc_itu_t
sd_mod
usbcore
ssb
usb_common
mmc_core
sr_mod
cdrom
pcmcia
pcmcia_core
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 00:11:24:36:97:4c brd ff:ff:ff:ff:ff:ff
inet 169.254.5.212/16 brd 169.254.255.255 scope link eth0:avahi
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:11:24:8d:96:58 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.113/24 brd 192.168.1.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::211:24ff:fe8d:9658/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 4958 38 0 0 0 0 0 0 4958 38 0 0 0 0 0 0
wlan0: 2902770 2438 0 0 0 0 0 0 160734 1113 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2415 total packets received
3 with invalid addresses
0 forwarded
0 incoming packets discarded
1976 incoming packets delivered
1091 requests sent out
178 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
12 active connections openings
2 passive connection openings
4 failed connection attempts
0 connection resets received
0 connections established
1905 segments received
1035 segments send out
2 segments retransmited
0 bad segments received.
4 resets sent
Udp:
100 packets received
0 packets to unknown port received.
0 packet receive errors
84 packets sent
IgnoredMulti: 5
UdpLite:
TcpExt:
3 TCP sockets finished time wait in fast timer
2 delayed acks sent
1802 packet headers predicted
47 acknowledgments not containing data payload received
5 predicted acknowledgments
1 other TCP timeouts
TCPLossProbes: 1
TCPRcvCoalesce: 23
TCPAutoCorking: 1
TCPOrigDataSent: 74
IpExt:
InMcastPkts: 65
OutMcastPkts: 52
InBcastPkts: 5
InOctets: 2870141
OutOctets: 122303
InMcastOctets: 8893
OutMcastOctets: 6802
InBcastOctets: 879
InNoECTPkts: 2415
** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Inc. UniNorth 2 AGP [106b:0034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
0000:00:10.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV350/M10 / RV360/M11 [Mobility Radeon 9600 (PRO) / 9700] [1002:4e50] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV350/M10 / RV360/M11 [Mobility Radeon 9600 (PRO) / 9700] [1002:4e50]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at b0020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
0001:10:0b.0 Host bridge [0600]: Apple Inc. UniNorth 2 PCI [106b:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Apple Inc. AirPort Extreme [106b:004e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin A routed to IRQ 52
Region 0: Memory at a0006000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
0001:10:13.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 53
Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=10, secondary=11, subordinate=14, sec-latency=176
Memory window 0: 84000000-87ffffff (prefetchable)
Memory window 1: 88000000-8bffffff
I/O window 0: 00001000-000010ff
I/O window 1: 00001100-000011ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
0001:10:17.0 Unassigned class [ff00]: Apple Inc. KeyLargo/Intrepid Mac I/O [106b:003e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:10:19.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 28
Region 0: Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=4K]
0001:10:1a.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at a0003000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
0001:10:1b.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
0001:10:1b.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
0001:10:1b.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 63
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
0002:24:0b.0 Host bridge [0600]: Apple Inc. UniNorth 2 Internal PCI [106b:0036]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0002:24:0d.0 Unassigned class [ff00]: Apple Inc. UniNorth/Intrepid ATA/100 [106b:003b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: pata-pci-macio
0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI])
Subsystem: Apple Inc. iBook G4 2004 [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0002:24:0f.0 Ethernet controller [0200]: Apple Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
Kernel driver in use: gem
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 05ac:020e Apple, Inc. Internal Keyboard/Trackpad (ANSI)
Bus 002 Device 006: ID 05ac:8205 Apple, Inc. Bluetooth HCI
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
Architecture: powerpc (ppc)
Kernel: Linux 4.1.0-2-powerpc
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.1.0-2-powerpc depends on:
ii debconf [debconf-2.0] 1.5.57
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 21-1
ii linux-base 4.0
Versions of packages linux-image-4.1.0-2-powerpc recommends:
ii firmware-linux-free 3.4
Versions of packages linux-image-4.1.0-2-powerpc suggests:
pn debian-kernel-handbook <none>
pn linux-doc-4.1 <none>
pn mkvmlinuz <none>
Versions of packages linux-image-4.1.0-2-powerpc is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.44
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.1.0-2-powerpc/postinst/depmod-error-initrd-4.1.0-2-powerpc: false
linux-image-4.1.0-2-powerpc/postinst/mips-initrd-4.1.0-2-powerpc:
linux-image-4.1.0-2-powerpc/prerm/removing-running-kernel-4.1.0-2-powerpc: true
Reply to: