Bug#748945: works again
Hi,
I am not able to reproduce this anymore either with mpv or (s)mplayer
(actually, in the previous post, vlc did not work using xv).
I am now running a 3.16.0-4-amd64 kernel (dmesg attached). I did not
test every release in between... I believe it was due to something
broken at one point in the graphic stack (xorg?, driver?, mesa? and
maybe not directly kernel related)
I think you can close this one.
Cheers,
Nicolas
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=af81687f-22a2-4ccd-a8dd-444eedbc66a6 ro quiet snd_hda_intel.index=1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba56cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba56d000-0x00000000ba573fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ba574000-0x00000000ba9befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba9bf000-0x00000000baddffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bade0000-0x00000000cc6a6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc6a7000-0x00000000cc8aefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc8af000-0x00000000cc8c3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cc8c4000-0x00000000ccdfdfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccdfe000-0x00000000cdffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/H87I-PLUS, BIOS 0507 07/01/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 4 base 00CF000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE
[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21fc00000-0x21fdfffff]
[ 0.000000] [mem 0x21fc00000-0x21fdfffff] page 2M
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fbfffff]
[ 0.000000] [mem 0x21c000000-0x21fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xba56cfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xba3fffff] page 2M
[ 0.000000] [mem 0xba400000-0xba56cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xba574000-0xba9befff]
[ 0.000000] [mem 0xba574000-0xba5fffff] page 4k
[ 0.000000] [mem 0xba600000-0xba7fffff] page 2M
[ 0.000000] [mem 0xba800000-0xba9befff] page 4k
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbade0000-0xcc6a6fff]
[ 0.000000] [mem 0xbade0000-0xbadfffff] page 4k
[ 0.000000] [mem 0xbae00000-0xcc5fffff] page 2M
[ 0.000000] [mem 0xcc600000-0xcc6a6fff] page 4k
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcdfff000-0xcdffffff]
[ 0.000000] [mem 0xcdfff000-0xcdffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x36452000-0x37220fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CC8B3080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CC8BF598 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CC8B3188 00C40F (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CCDFC080 000040
[ 0.000000] ACPI: APIC 0x00000000CC8BF6A8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CC8BF720 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CC8BF768 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CC8BFCA8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CC8C0780 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CC8C07C0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CC8C07F8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CC8C0B68 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000CC8C3E60 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fdfffff]
[ 0.000000] NODE_DATA [mem 0x21fdf6000-0x21fdfafff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217800000-ffff88021e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xba56cfff]
[ 0.000000] node 0: [mem 0xba574000-0xba9befff]
[ 0.000000] node 0: [mem 0xbade0000-0xcc6a6fff]
[ 0.000000] node 0: [mem 0xcdfff000-0xcdffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21fdfffff]
[ 0.000000] On node 0 totalpages: 2015260
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11377 pages used for memmap
[ 0.000000] DMA32 zone: 832128 pages, LIFO batch:31
[ 0.000000] Normal zone: 16121 pages used for memmap
[ 0.000000] Normal zone: 1179136 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcf200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba56d000-0xba573fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba9bf000-0xbaddffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc6a7000-0xcc8aefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc8af000-0xcc8c3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc8c4000-0xccdfdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccdfe000-0xcdffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fa00000 s85824 r8192 d20672 u524288
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1987685
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=af81687f-22a2-4ccd-a8dd-444eedbc66a6 ro quiet snd_hda_intel.index=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7856152K/8061040K available (5191K kernel code, 942K rwdata, 1824K rodata, 1200K init, 840K bss, 204888K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2899.702 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.40 BogoMIPS (lpj=11598808)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20140424
[ 0.008037] ACPI: All ACPI Tables successfully acquired
[ 0.009213] Security Framework initialized
[ 0.009219] AppArmor: AppArmor disabled by boot time parameter
[ 0.009220] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009583] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010769] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011286] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.011294] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.011468] Initializing cgroup subsys memory
[ 0.011472] Initializing cgroup subsys devices
[ 0.011477] Initializing cgroup subsys freezer
[ 0.011479] Initializing cgroup subsys net_cls
[ 0.011482] Initializing cgroup subsys blkio
[ 0.011485] Initializing cgroup subsys perf_event
[ 0.011486] Initializing cgroup subsys net_prio
[ 0.011506] CPU: Physical Processor ID: 0
[ 0.011506] CPU: Processor Core ID: 0
[ 0.011509] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.012250] mce: CPU supports 9 MCE banks
[ 0.012260] CPU0: Thermal monitoring enabled (TM1)
[ 0.012270] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.012347] Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
[ 0.012987] ftrace: allocating 21551 entries in 85 pages
[ 0.019286] dmar: Host address width 39
[ 0.019288] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.019294] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.019295] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.019299] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.019300] dmar: RMRR base: 0x000000cc836000 end: 0x000000cc842fff
[ 0.019301] dmar: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[ 0.019363] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.019364] HPET id 0 under DRHD base 0xfed91000
[ 0.019365] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.019508] Enabled IRQ remapping in x2apic mode
[ 0.019509] Enabling x2apic
[ 0.019510] Enabled x2apic
[ 0.019514] Switched APIC routing to cluster x2apic.
[ 0.019901] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059568] smpboot: CPU0: Intel(R) Core(TM) i5-4570S CPU @ 2.90GHz (fam: 06, model: 3c, stepping: 03)
[ 0.059573] TSC deadline timer enabled
[ 0.059590] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.059606] ... version: 3
[ 0.059606] ... bit width: 48
[ 0.059607] ... generic registers: 8
[ 0.059608] ... value mask: 0000ffffffffffff
[ 0.059608] ... max period: 0000ffffffffffff
[ 0.059609] ... fixed-purpose events: 3
[ 0.059609] ... event mask: 00000007000000ff
[ 0.060733] x86: Booting SMP configuration:
[ 0.060735] .... node #0, CPUs: #1
[ 0.071840] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.074688] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.074768] #2
[ 0.085872] CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.088769] #3
[ 0.099877] CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.102795] x86: Booted up 1 node, 4 CPUs
[ 0.102797] smpboot: Total of 4 processors activated (23197.61 BogoMIPS)
[ 0.105484] devtmpfs: initialized
[ 0.107466] PM: Registering ACPI NVS region [mem 0xba56d000-0xba573fff] (28672 bytes)
[ 0.107468] PM: Registering ACPI NVS region [mem 0xcc8c4000-0xccdfdfff] (5480448 bytes)
[ 0.108122] pinctrl core: initialized pinctrl subsystem
[ 0.108178] NET: Registered protocol family 16
[ 0.108270] cpuidle: using governor ladder
[ 0.108271] cpuidle: using governor menu
[ 0.108307] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.108308] ACPI: bus type PCI registered
[ 0.108309] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.108372] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.108374] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.108433] PCI: Using configuration type 1 for base access
[ 0.117690] ACPI: Added _OSI(Module Device)
[ 0.117692] ACPI: Added _OSI(Processor Device)
[ 0.117693] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.117694] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.120319] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.122196] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.133461] ACPI: Dynamic OEM Table Load:
[ 0.133465] ACPI: SSDT 0xFFFF880216D4B800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.142969] ACPI: Dynamic OEM Table Load:
[ 0.142973] ACPI: SSDT 0xFFFF880216C98800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.154742] ACPI: Dynamic OEM Table Load:
[ 0.154745] ACPI: SSDT 0xFFFF880216D87E00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.167224] ACPI: Interpreter enabled
[ 0.167229] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.167233] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.167244] ACPI: (supports S0 S3 S4 S5)
[ 0.167245] ACPI: Using IOAPIC for interrupt routing
[ 0.167266] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.173169] ACPI: Power Resource [FN00] (off)
[ 0.173226] ACPI: Power Resource [FN01] (off)
[ 0.173282] ACPI: Power Resource [FN02] (off)
[ 0.173336] ACPI: Power Resource [FN03] (off)
[ 0.173390] ACPI: Power Resource [FN04] (off)
[ 0.174005] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.174008] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.174160] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.174256] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.174669] PCI host bridge to bus 0000:00
[ 0.174671] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.174676] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.174677] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.174678] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.174679] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.174680] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.174681] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.174682] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.174683] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.174684] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.174685] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[ 0.174691] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.174757] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.174784] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.174822] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.174855] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.174863] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.174867] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.174871] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.174932] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.174938] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
[ 0.175019] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.175034] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
[ 0.175084] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.175113] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.175144] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.175160] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3f000-0xf7c3f00f 64bit]
[ 0.175214] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.175276] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.175290] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
[ 0.175296] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff]
[ 0.175302] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.175352] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.175383] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.175416] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.175433] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff]
[ 0.175510] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.175550] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.175582] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.175594] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
[ 0.175653] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.175683] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.175717] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.175734] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
[ 0.175811] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.175851] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.175882] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
[ 0.176023] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.176036] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.176042] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.176047] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.176053] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.176059] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.176064] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
[ 0.176095] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.176146] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.176158] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
[ 0.176174] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.176260] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.176267] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.176712] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.176747] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.176780] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.176813] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.176845] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.176877] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.176910] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.176942] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.177198] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.177270] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.177271] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.177273] vgaarb: loaded
[ 0.177273] vgaarb: bridge control possible 0000:00:02.0
[ 0.177313] PCI: Using ACPI for IRQ routing
[ 0.178548] PCI: pci_cache_line_size set to 64 bytes
[ 0.178571] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.178572] e820: reserve RAM buffer [mem 0xba56d000-0xbbffffff]
[ 0.178573] e820: reserve RAM buffer [mem 0xba9bf000-0xbbffffff]
[ 0.178574] e820: reserve RAM buffer [mem 0xcc6a7000-0xcfffffff]
[ 0.178575] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.178576] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.178676] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.178679] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.180695] Switched to clocksource hpet
[ 0.184312] pnp: PnP ACPI init
[ 0.184320] ACPI: bus type PNP registered
[ 0.184369] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.184371] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.184487] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.184489] system 00:01: [io 0xffff] has been reserved
[ 0.184490] system 00:01: [io 0xffff] has been reserved
[ 0.184491] system 00:01: [io 0xffff] has been reserved
[ 0.184493] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.184494] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.184495] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.184496] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.184498] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.184499] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.184500] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184522] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.184554] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.184555] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.184613] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.184614] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184646] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.184648] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184680] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.184972] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.184974] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.184975] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.184976] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.184978] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.184979] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.184980] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.185767] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.185769] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.185770] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.185772] system 00:07: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.185773] system 00:07: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.185774] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.185949] pnp: PnP ACPI: found 8 devices
[ 0.185949] ACPI: bus type PNP unregistered
[ 0.191801] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.191807] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.191808] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.191809] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.191810] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.191811] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.191812] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.191813] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.191814] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.191815] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.191816] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[ 0.191856] NET: Registered protocol family 2
[ 0.192025] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.192128] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.192227] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.192239] TCP: reno registered
[ 0.192247] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.192268] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.192326] NET: Registered protocol family 1
[ 0.192337] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.228746] PCI: CLS 64 bytes, default 64
[ 0.228775] Unpacking initramfs...
[ 0.424634] Freeing initrd memory: 14140K (ffff880036452000 - ffff880037221000)
[ 0.424683] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.424685] software IO TLB [mem 0xc86a7000-0xcc6a7000] (64MB) mapped at [ffff8800c86a7000-ffff8800cc6a6fff]
[ 0.424867] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.424901] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.424904] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.424909] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.424914] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.424948] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.425152] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.425178] audit: initializing netlink subsys (disabled)
[ 0.425190] audit: type=2000 audit(1415958254.424:1): initialized
[ 0.425435] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.425454] zbud: loaded
[ 0.425583] VFS: Disk quotas dquot_6.5.2
[ 0.425596] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.425633] msgmni has been set to 15371
[ 0.425849] alg: No test for stdrng (krng)
[ 0.425868] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.425903] io scheduler noop registered
[ 0.425906] io scheduler deadline registered
[ 0.425933] io scheduler cfq registered (default)
[ 0.426062] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.426119] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.426131] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.426162] intel_idle: MWAIT substates: 0x42120
[ 0.426163] intel_idle: v0.4 model 0x3C
[ 0.426163] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.426306] GHES: HEST is not enabled!
[ 0.426359] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.426672] Linux agpgart interface v0.103
[ 0.426754] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.426755] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.427381] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.427461] mousedev: PS/2 mouse device common for all mice
[ 0.427481] rtc_cmos 00:02: RTC can wake from S4
[ 0.427600] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.427625] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.427634] Intel P-state driver initializing.
[ 0.427641] Intel pstate controlling: cpu 0
[ 0.427657] Intel pstate controlling: cpu 1
[ 0.427669] Intel pstate controlling: cpu 2
[ 0.427681] Intel pstate controlling: cpu 3
[ 0.427756] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.428548] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.428551] AMD IOMMUv2 functionality not available on this system
[ 0.428783] TCP: cubic registered
[ 0.428980] NET: Registered protocol family 10
[ 0.429378] mip6: Mobile IPv6
[ 0.429385] NET: Registered protocol family 17
[ 0.429396] mpls_gso: MPLS GSO support
[ 0.430354] registered taskstats version 1
[ 0.431310] rtc_cmos 00:02: setting system clock to 2014-11-14 09:44:14 UTC (1415958254)
[ 0.431514] PM: Hibernation image not present or could not be loaded.
[ 0.432870] Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000)
[ 0.432871] Write protecting the kernel read-only data: 8192k
[ 0.434372] Freeing unused kernel memory: 940K (ffff880001515000 - ffff880001600000)
[ 0.434708] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
[ 0.440967] systemd-udevd[69]: starting version 215
[ 0.441163] random: systemd-udevd urandom read with 3 bits of entropy available
[ 0.449602] ACPI: Fan [FAN0] (off)
[ 0.449630] ACPI: Fan [FAN1] (off)
[ 0.449651] ACPI: Fan [FAN2] (off)
[ 0.449671] ACPI: Fan [FAN3] (off)
[ 0.449702] ACPI: Fan [FAN4] (off)
[ 0.449750] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.450129] pps_core: LinuxPPS API ver. 1 registered
[ 0.450130] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.450437] ACPI: bus type USB registered
[ 0.450458] usbcore: registered new interface driver usbfs
[ 0.450466] usbcore: registered new interface driver hub
[ 0.450480] PTP clock support registered
[ 0.450831] SCSI subsystem initialized
[ 0.450982] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.450983] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 0.451095] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.451109] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 0.451604] libata version 3.00 loaded.
[ 0.451994] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.451996] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.452115] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.452116] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.454341] usbcore: registered new device driver usb
[ 0.461240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.461343] ehci-pci: EHCI PCI platform driver
[ 0.620450] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.620453] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ac:22:0b:4e:13:47
[ 0.620454] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.620478] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 0.620517] ahci 0000:00:1f.2: version 3.0
[ 0.620667] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.620700] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
[ 0.620702] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.637141] scsi0 : ahci
[ 0.637308] scsi1 : ahci
[ 0.637383] scsi2 : ahci
[ 0.637450] scsi3 : ahci
[ 0.637515] scsi4 : ahci
[ 0.637580] scsi5 : ahci
[ 0.637610] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 44
[ 0.637612] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 44
[ 0.637612] ata3: DUMMY
[ 0.637613] ata4: DUMMY
[ 0.637614] ata5: DUMMY
[ 0.637615] ata6: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a380 irq 44
[ 0.637704] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.637711] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.637807] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.637820] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
[ 0.637907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.637909] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.637910] usb usb1: Product: xHCI Host Controller
[ 0.637911] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.637912] usb usb1: SerialNumber: 0000:00:14.0
[ 0.638005] hub 1-0:1.0: USB hub found
[ 0.638024] hub 1-0:1.0: 14 ports detected
[ 0.639719] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.639722] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.639816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.639817] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.639818] usb usb2: Product: xHCI Host Controller
[ 0.639819] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.639820] usb usb2: SerialNumber: 0000:00:14.0
[ 0.639904] hub 2-0:1.0: USB hub found
[ 0.639918] hub 2-0:1.0: 6 ports detected
[ 0.640707] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.640711] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.640722] ehci-pci 0000:00:1a.0: debug port 2
[ 0.644632] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.644641] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000
[ 0.656565] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.656589] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.656590] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.656591] usb usb3: Product: EHCI Host Controller
[ 0.656592] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.656593] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.656673] hub 3-0:1.0: USB hub found
[ 0.656676] hub 3-0:1.0: 2 ports detected
[ 0.656810] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.656814] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.656823] ehci-pci 0000:00:1d.0: debug port 2
[ 0.660710] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.660728] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000
[ 0.672572] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.672597] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.672598] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.672599] usb usb4: Product: EHCI Host Controller
[ 0.672600] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 0.672601] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.672714] hub 4-0:1.0: USB hub found
[ 0.672718] hub 4-0:1.0: 2 ports detected
[ 0.948512] usb 1-10: new low-speed USB device number 2 using xhci_hcd
[ 0.956503] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.956517] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.956531] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.956811] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133
[ 0.956814] ata1.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.957132] ata1.00: configured for UDMA/133
[ 0.957242] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M040 02M3 PQ: 0 ANSI: 5
[ 0.958588] ata2.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 0.958590] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.958748] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 0.958751] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88021f071130), AE_NOT_FOUND (20140424/psparse-536)
[ 0.958757] ata6.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
[ 0.959737] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 0.959741] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88021f071130), AE_NOT_FOUND (20140424/psparse-536)
[ 0.959747] ata6.00: configured for UDMA/100
[ 0.960815] ata2.00: configured for UDMA/133
[ 0.960911] scsi 1:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5
[ 0.961905] scsi 5:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
[ 0.971341] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 0.971347] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.971365] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.971366] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.971373] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.971374] sd 0:0:0:0: [sda] Write Protect is off
[ 0.971376] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.971386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.971687] sda: sda2 sda3
[ 0.971912] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.979043] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.979044] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.979145] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 0.979489] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.979548] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 0.979610] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 1.025595] sdb: sdb1
[ 1.025738] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.081323] usb 1-10: New USB device found, idVendor=046d, idProduct=c01b
[ 1.081325] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.081326] usb 1-10: Product: USB-PS/2 Optical Mouse
[ 1.081327] usb 1-10: Manufacturer: Logitech
[ 1.081415] usb 1-10: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.082495] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.085400] usbcore: registered new interface driver usbhid
[ 1.085402] usbhid: USB HID core driver
[ 1.085755] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:046D:C01B.0001/input/input1
[ 1.085815] hid-generic 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-10/input0
[ 1.192440] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.239263] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.324731] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.324733] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.324873] hub 3-1:1.0: USB hub found
[ 1.324978] hub 3-1:1.0: 6 ports detected
[ 1.408554] fuse init (API version 7.23)
[ 1.414935] vboxdrv: Found 4 processor cores.
[ 1.415126] vboxdrv: fAsync=0 offMin=0x1dc offMax=0x1a57
[ 1.415167] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 1.415168] vboxdrv: Successfully loaded version 4.3.18_Debian (interface 0x001a0008).
[ 1.424343] tsc: Refined TSC clocksource calibration: 2899.997 MHz
[ 1.436352] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.439793] systemd-udevd[192]: starting version 215
[ 1.503549] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.503552] ACPI: Power Button [PWRB]
[ 1.503585] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.503587] ACPI: Power Button [PWRF]
[ 1.508611] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.509224] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[ 1.510039] mei_me 0000:00:16.0: version message write failed: ret = -5
[ 1.510082] mei_me 0000:00:16.0: hbm_start failed ret = -5
[ 1.511790] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 1.511794] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.519655] [drm] Initialized drm 1.1.0 20060810
[ 1.523564] wmi: Mapper loaded
[ 1.528175] EXT4-fs (sda2): re-mounted. Opts: discard,errors=remount-ro
[ 1.534039] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.545345] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 1.547067] [drm] Memory usable by graphics device = 2048M
[ 1.547069] [drm] Replacing VGA console driver
[ 1.548015] Console: switching to colour dummy device 80x25
[ 1.552140] AVX2 version of gcm_enc/dec engaged.
[ 1.557117] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 1.557990] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 1.557993] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.557994] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1.557995] sound hdaudioC0D0: mono: mono_out=0x0
[ 1.557995] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 1.557996] sound hdaudioC0D0: inputs:
[ 1.557997] sound hdaudioC0D0: Front Mic=0x19
[ 1.557999] sound hdaudioC0D0: Rear Mic=0x18
[ 1.558000] sound hdaudioC0D0: Line=0x1a
[ 1.558579] iTCO_vendor_support: vendor-support=0
[ 1.559685] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.559707] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 1.559826] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.561581] asus_wmi: ASUS WMI generic driver loaded
[ 1.561677] alg: No test for crc32 (crc32-pclmul)
[ 1.562100] asus_wmi: Initialization: 0x0
[ 1.562114] asus_wmi: BIOS WMI version: 0.9
[ 1.562137] asus_wmi: SFUN value: 0x0
[ 1.562325] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[ 1.563366] asus_wmi: Backlight controlled by ACPI video driver
[ 1.568787] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.568790] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.568794] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 1.568873] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.568910] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.568932] hub 4-1:1.0: USB hub found
[ 1.568954] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.569003] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1.569030] hub 4-1:1.0: 8 ports detected
[ 1.572668] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 1.572675] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.572676] [drm] Driver supports precise vblank timestamp query.
[ 1.572694] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.617906] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard
[ 1.705055] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.707072] random: nonblocking pool is initialized
[ 1.707223] systemd-journald[171]: Received request to flush runtime journal from PID 1
[ 1.854835] fbcon: inteldrmfb (fb0) is primary device
[ 1.861683] Console: switching to colour frame buffer device 240x67
[ 1.864638] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.864639] i915 0000:00:02.0: registered panic notifier
[ 1.872378] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 1.878476] vboxpci: IOMMU not found (not registered)
[ 1.909748] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.909962] acpi device:62: registered as cooling_device10
[ 1.910017] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 1.910467] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.911454] snd_hda_intel 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.927181] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input12
[ 1.976215] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 1.976296] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.428122] Switched to clocksource tsc
[ 3.481300] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 3.481303] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 3.481329] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3.803734] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2732.537959] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2999.129336] capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 6254.853534] sr0: CDROM not ready. Make sure there is a disc in the drive.
[24093.025325] device-mapper: uevent: version 1.0.3
[24093.025363] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[24093.404242] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[24093.409564] JFS: nTxBlock = 8192, nTxLock = 65536
[24093.416888] ntfs: driver 2.1.30 [Flags: R/W MODULE].
[24093.422726] QNX4 filesystem 0.2.3 registered.
[24093.490628] raid6: sse2x1 10567 MB/s
[24093.558608] raid6: sse2x2 13457 MB/s
[24093.626577] raid6: sse2x4 15771 MB/s
[24093.694566] raid6: avx2x1 21043 MB/s
[24093.762536] raid6: avx2x2 23971 MB/s
[24093.830515] raid6: avx2x4 28214 MB/s
[24093.830516] raid6: using algorithm avx2x4 (28214 MB/s)
[24093.830526] raid6: using avx2x2 recovery algorithm
[24093.831538] xor: automatically using best checksumming function:
[24093.870504] avx : 33441.000 MB/sec
[24093.880612] Btrfs loaded
Reply to: