Bug#759809: linux-image-3.2.0-4-amd64: USB 3 devices fail, logging "xHCI xhci_drop_endpoint called with disabled ep ffff8802165db0c0"

[Henrik Stoerner <henrik@hswn.dk>]

Package: src:linux
Version: 3.2.60-1+deb7u3
Severity: normal

Dear Maintainer,

Yesterday morning I rebooted a machine running Wheezy (stable) after installing kernel upgrade 3.2.60-1+deb7u3. Upon reboot, the machine hung while detecting two USB-3 attached harddisks. 
After unplugging the two harddisks, boot continued. Re-connecting them caused the same errors to appear in the log. The kernel log below shows this after 35 seconds.

Connecting the two disks to USB-2 ports worked without problems, and they worked fine on previous kernel - which was either 3.2.60-1+deb7u2 or u1 (not entirely sure which, but probably u2). 
I have tried connecting another device (an APC UPS device) to the USB-3 port, and this is detected by the kernel but talking to the device fails.

Please note that the USB device listing in the bugreport is from the current boot, so the devices have been changed to other connections to avoid using the USB-3 ports.

The problem is reproducible, I see the same behaviour on an identical system (same motherboard, different USB devices).

-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.60-1+deb7u3

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=61d5a246-0740-4e6e-8745-f69c986ec68d ro irqpoll ip=192.168.1.1::192.168.1.254:255.255.255.0::eth1:off

** Not tainted

** Kernel log:
Aug 29 08:01:09 blixen kernel: imklog 5.8.11, log source = /proc/kmsg started.
Aug 29 08:01:09 blixen kernel: [    0.000000] Initializing cgroup subsys cpuset
Aug 29 08:01:09 blixen kernel: [    0.000000] Initializing cgroup subsys cpu
Aug 29 08:01:09 blixen kernel: [    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.60-1+deb7u3
Aug 29 08:01:09 blixen kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=61d5a246-0740-4e6e-8745-f69c986ec68d ro irqpoll ip=192.168.1.1::192.168.1.254:255.255.255.0::eth1:off
Aug 29 08:01:09 blixen kernel: [    0.000000] BIOS-provided physical RAM map:
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 0000000040200000 - 00000000da38d000 (usable)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000da38d000 - 00000000da93e000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000da93e000 - 00000000dab90000 (ACPI NVS)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000dab90000 - 00000000dab9e000 (ACPI data)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000dab9e000 - 00000000dabbe000 (ACPI NVS)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000dabbe000 - 00000000dabc3000 (ACPI data)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000dabc3000 - 00000000dac06000 (ACPI NVS)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000dac06000 - 00000000db000000 (usable)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000]  BIOS-e820: 0000000100000000 - 000000021f600000 (usable)
Aug 29 08:01:09 blixen kernel: [    0.000000] NX (Execute Disable) protection: active
Aug 29 08:01:09 blixen kernel: [    0.000000] SMBIOS 2.6 present.
Aug 29 08:01:09 blixen kernel: [    0.000000] DMI: System manufacturer System Product Name/P8H67-M PRO, BIOS 3604 02/23/2012
Aug 29 08:01:09 blixen kernel: [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Aug 29 08:01:09 blixen kernel: [    0.000000] No AGP bridge found
Aug 29 08:01:09 blixen kernel: [    0.000000] last_pfn = 0x21f600 max_arch_pfn = 0x400000000
Aug 29 08:01:09 blixen kernel: [    0.000000] MTRR default type: uncachable
Aug 29 08:01:09 blixen kernel: [    0.000000] MTRR fixed ranges enabled:
Aug 29 08:01:09 blixen kernel: [    0.000000]   00000-9FFFF write-back
Aug 29 08:01:09 blixen kernel: [    0.000000]   A0000-BFFFF uncachable
Aug 29 08:01:09 blixen kernel: [    0.000000]   C0000-D3FFF write-protect
Aug 29 08:01:09 blixen kernel: [    0.000000]   D4000-E7FFF uncachable
Aug 29 08:01:09 blixen kernel: [    0.000000]   E8000-FFFFF write-protect
Aug 29 08:01:09 blixen kernel: [    0.000000] MTRR variable ranges enabled:
Aug 29 08:01:09 blixen kernel: [    0.000000]   0 base 000000000 mask E00000000 write-back
Aug 29 08:01:09 blixen kernel: [    0.000000]   1 base 200000000 mask FE0000000 write-back
Aug 29 08:01:09 blixen kernel: [    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
Aug 29 08:01:09 blixen kernel: [    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
Aug 29 08:01:09 blixen kernel: [    0.000000]   4 base 0DB800000 mask FFF800000 uncachable
Aug 29 08:01:09 blixen kernel: [    0.000000]   5 base 21F800000 mask FFF800000 uncachable
Aug 29 08:01:09 blixen kernel: [    0.000000]   6 base 21F600000 mask FFFE00000 uncachable
Aug 29 08:01:09 blixen kernel: [    0.000000]   7 disabled
Aug 29 08:01:09 blixen kernel: [    0.000000]   8 disabled
Aug 29 08:01:09 blixen kernel: [    0.000000]   9 disabled
Aug 29 08:01:09 blixen kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Aug 29 08:01:09 blixen kernel: [    0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
Aug 29 08:01:09 blixen kernel: [    0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
Aug 29 08:01:09 blixen kernel: [    0.000000] found SMP MP-table at [ffff8800000fccf0] fccf0
Aug 29 08:01:09 blixen kernel: [    0.000000] initial memory mapped : 0 - 20000000
Aug 29 08:01:09 blixen kernel: [    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
Aug 29 08:01:09 blixen kernel: [    0.000000] reserving inaccessible SNB gfx pages
Aug 29 08:01:09 blixen kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000db000000
Aug 29 08:01:09 blixen kernel: [    0.000000]  0000000000 - 00db000000 page 2M
Aug 29 08:01:09 blixen kernel: [    0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
Aug 29 08:01:09 blixen kernel: [    0.000000] init_memory_mapping: 0000000100000000-000000021f600000
Aug 29 08:01:09 blixen kernel: [    0.000000]  0100000000 - 021f600000 page 2M
Aug 29 08:01:09 blixen kernel: [    0.000000] kernel direct mapping tables up to 21f600000 @ daffa000-db000000
Aug 29 08:01:09 blixen kernel: [    0.000000] RAMDISK: 3681e000 - 37407000
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: XSDT 00000000dab90070 0005C (v01 ALASKA    A M I 01072009 AMI  00010013)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: FACP 00000000dab9ba20 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: DSDT 00000000dab90158 0B8C3 (v02 ALASKA    A M I 00000015 INTL 20051117)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: FACS 00000000dabbcf80 00040
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: APIC 00000000dab9bb18 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: MCFG 00000000dab9bb90 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: HPET 00000000dab9bbd0 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: SSDT 00000000dab9bc08 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: SSDT 00000000dab9bf78 009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: SSDT 00000000dab9c928 00A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Aug 29 08:01:09 blixen kernel: [    0.000000] No NUMA configuration found
Aug 29 08:01:09 blixen kernel: [    0.000000] Faking a node at 0000000000000000-000000021f600000
Aug 29 08:01:09 blixen kernel: [    0.000000] Initmem setup node 0 0000000000000000-000000021f600000
Aug 29 08:01:09 blixen kernel: [    0.000000]   NODE_DATA [000000021f5fb000 - 000000021f5fffff]
Aug 29 08:01:09 blixen kernel: [    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216c00000-ffff88021ddfffff] on node 0
Aug 29 08:01:09 blixen kernel: [    0.000000] Zone PFN ranges:
Aug 29 08:01:09 blixen kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Aug 29 08:01:09 blixen kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Aug 29 08:01:09 blixen kernel: [    0.000000]   Normal   0x00100000 -> 0x0021f600
Aug 29 08:01:09 blixen kernel: [    0.000000] Movable zone start PFN for each node
Aug 29 08:01:09 blixen kernel: [    0.000000] early_node_map[6] active PFN ranges
Aug 29 08:01:09 blixen kernel: [    0.000000]     0: 0x00000010 -> 0x0000009c
Aug 29 08:01:09 blixen kernel: [    0.000000]     0: 0x00000100 -> 0x00020000
Aug 29 08:01:09 blixen kernel: [    0.000000]     0: 0x00020200 -> 0x00040000
Aug 29 08:01:09 blixen kernel: [    0.000000]     0: 0x00040200 -> 0x000da38d
Aug 29 08:01:09 blixen kernel: [    0.000000]     0: 0x000dac06 -> 0x000db000
Aug 29 08:01:09 blixen kernel: [    0.000000]     0: 0x00100000 -> 0x0021f600
Aug 29 08:01:09 blixen kernel: [    0.000000] On node 0 totalpages: 2070803
Aug 29 08:01:09 blixen kernel: [    0.000000]   DMA zone: 56 pages used for memmap
Aug 29 08:01:09 blixen kernel: [    0.000000]   DMA zone: 140 pages reserved
Aug 29 08:01:09 blixen kernel: [    0.000000]   DMA zone: 3784 pages, LIFO batch:0
Aug 29 08:01:09 blixen kernel: [    0.000000]   DMA32 zone: 14280 pages used for memmap
Aug 29 08:01:09 blixen kernel: [    0.000000]   DMA32 zone: 875455 pages, LIFO batch:31
Aug 29 08:01:09 blixen kernel: [    0.000000]   Normal zone: 16093 pages used for memmap
Aug 29 08:01:09 blixen kernel: [    0.000000]   Normal zone: 1160995 pages, LIFO batch:31
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 29 08:01:09 blixen kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: IRQ0 used by override.
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: IRQ2 used by override.
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: IRQ9 used by override.
Aug 29 08:01:09 blixen kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Aug 29 08:01:09 blixen kernel: [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Aug 29 08:01:09 blixen kernel: [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
Aug 29 08:01:09 blixen kernel: [    0.000000] nr_irqs_gsi: 40
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000da38d000 - 00000000da93e000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000da93e000 - 00000000dab90000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000dab90000 - 00000000dab9e000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000dab9e000 - 00000000dabbe000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000dabbe000 - 00000000dabc3000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000dabc3000 - 00000000dac06000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
Aug 29 08:01:09 blixen kernel: [    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Aug 29 08:01:09 blixen kernel: [    0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
Aug 29 08:01:09 blixen kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Aug 29 08:01:09 blixen kernel: [    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
Aug 29 08:01:09 blixen kernel: [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021f200000 s82944 r8192 d23552 u524288
Aug 29 08:01:09 blixen kernel: [    0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
Aug 29 08:01:09 blixen kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3 
Aug 29 08:01:09 blixen kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2040234
Aug 29 08:01:09 blixen kernel: [    0.000000] Policy zone: Normal
Aug 29 08:01:09 blixen kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=61d5a246-0740-4e6e-8745-f69c986ec68d ro irqpoll ip=192.168.1.1::192.168.1.254:255.255.255.0::eth1:off
Aug 29 08:01:09 blixen kernel: [    0.000000] Misrouted IRQ fixup and polling support enabled
Aug 29 08:01:09 blixen kernel: [    0.000000] This may significantly impact system performance
Aug 29 08:01:09 blixen kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Aug 29 08:01:09 blixen kernel: [    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Aug 29 08:01:09 blixen kernel: [    0.000000] Checking aperture...
Aug 29 08:01:09 blixen kernel: [    0.000000] No AGP bridge found
Aug 29 08:01:09 blixen kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Aug 29 08:01:09 blixen kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Aug 29 08:01:09 blixen kernel: [    0.000000] Memory: 8078688k/8902656k available (3431k kernel code, 619444k absent, 204524k reserved, 3308k data, 580k init)
Aug 29 08:01:09 blixen kernel: [    0.000000] Hierarchical RCU implementation.
Aug 29 08:01:09 blixen kernel: [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
Aug 29 08:01:09 blixen kernel: [    0.000000] NR_IRQS:33024 nr_irqs:712 16
Aug 29 08:01:09 blixen kernel: [    0.000000] Extended CMOS year: 2000
Aug 29 08:01:09 blixen kernel: [    0.000000] Console: colour VGA+ 80x25
Aug 29 08:01:09 blixen kernel: [    0.000000] console [tty0] enabled
Aug 29 08:01:09 blixen kernel: [    0.000000] hpet clockevent registered
Aug 29 08:01:09 blixen kernel: [    0.000000] Fast TSC calibration using PIT
Aug 29 08:01:09 blixen kernel: [    0.004000] Detected 3311.382 MHz processor.
Aug 29 08:01:09 blixen kernel: [    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6622.76 BogoMIPS (lpj=13245528)
Aug 29 08:01:09 blixen kernel: [    0.000112] pid_max: default: 32768 minimum: 301
Aug 29 08:01:09 blixen kernel: [    0.000189] Security Framework initialized
Aug 29 08:01:09 blixen kernel: [    0.000243] AppArmor: AppArmor disabled by boot time parameter
Aug 29 08:01:09 blixen kernel: [    0.000645] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Aug 29 08:01:09 blixen kernel: [    0.001901] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Aug 29 08:01:09 blixen kernel: [    0.002463] Mount-cache hash table entries: 256
Aug 29 08:01:09 blixen kernel: [    0.002587] Initializing cgroup subsys cpuacct
Aug 29 08:01:09 blixen kernel: [    0.002642] Initializing cgroup subsys memory
Aug 29 08:01:09 blixen kernel: [    0.002701] Initializing cgroup subsys devices
Aug 29 08:01:09 blixen kernel: [    0.002755] Initializing cgroup subsys freezer
Aug 29 08:01:09 blixen kernel: [    0.002809] Initializing cgroup subsys net_cls
Aug 29 08:01:09 blixen kernel: [    0.002862] Initializing cgroup subsys blkio
Aug 29 08:01:09 blixen kernel: [    0.002918] Initializing cgroup subsys perf_event
Aug 29 08:01:09 blixen kernel: [    0.002990] CPU: Physical Processor ID: 0
Aug 29 08:01:09 blixen kernel: [    0.003042] CPU: Processor Core ID: 0
Aug 29 08:01:09 blixen kernel: [    0.003097] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Aug 29 08:01:09 blixen kernel: [    0.003097] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Aug 29 08:01:09 blixen kernel: [    0.003210] mce: CPU supports 9 MCE banks
Aug 29 08:01:09 blixen kernel: [    0.003272] CPU0: Thermal monitoring enabled (TM1)
Aug 29 08:01:09 blixen kernel: [    0.003329] using mwait in idle threads.
Aug 29 08:01:09 blixen kernel: [    0.003716] ACPI: Core revision 20110623
Aug 29 08:01:09 blixen kernel: [    0.021424] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 29 08:01:09 blixen kernel: [    0.061131] CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
Aug 29 08:01:09 blixen kernel: [    0.168141] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
Aug 29 08:01:09 blixen kernel: [    0.168319] PEBS disabled due to CPU errata.
Aug 29 08:01:09 blixen kernel: [    0.168372] ... version:                3
Aug 29 08:01:09 blixen kernel: [    0.168425] ... bit width:              48
Aug 29 08:01:09 blixen kernel: [    0.168477] ... generic registers:      8
Aug 29 08:01:09 blixen kernel: [    0.168530] ... value mask:             0000ffffffffffff
Aug 29 08:01:09 blixen kernel: [    0.168584] ... max period:             000000007fffffff
Aug 29 08:01:09 blixen kernel: [    0.168638] ... fixed-purpose events:   3
Aug 29 08:01:09 blixen kernel: [    0.168690] ... event mask:             00000007000000ff
Aug 29 08:01:09 blixen kernel: [    0.168832] NMI watchdog enabled, takes one hw-pmu counter.
Aug 29 08:01:09 blixen kernel: [    0.168956] Booting Node   0, Processors  #1
Aug 29 08:01:09 blixen kernel: [    0.169034] smpboot cpu 1: start_ip = 97000
Aug 29 08:01:09 blixen kernel: [    0.276134] NMI watchdog enabled, takes one hw-pmu counter.
Aug 29 08:01:09 blixen kernel: [    0.276262]  #2
Aug 29 08:01:09 blixen kernel: [    0.276301] smpboot cpu 2: start_ip = 97000
Aug 29 08:01:09 blixen kernel: [    0.384092] NMI watchdog enabled, takes one hw-pmu counter.
Aug 29 08:01:09 blixen kernel: [    0.384220]  #3 Ok.
Aug 29 08:01:09 blixen kernel: [    0.384270] smpboot cpu 3: start_ip = 97000
Aug 29 08:01:09 blixen kernel: [    0.492016] NMI watchdog enabled, takes one hw-pmu counter.
Aug 29 08:01:09 blixen kernel: [    0.492092] Brought up 4 CPUs
Aug 29 08:01:09 blixen kernel: [    0.492144] Total of 4 processors activated (26489.42 BogoMIPS).
Aug 29 08:01:09 blixen kernel: [    0.494568] devtmpfs: initialized
Aug 29 08:01:09 blixen kernel: [    0.496732] PM: Registering ACPI NVS region at da93e000 (2433024 bytes)
Aug 29 08:01:09 blixen kernel: [    0.496862] PM: Registering ACPI NVS region at dab9e000 (131072 bytes)
Aug 29 08:01:09 blixen kernel: [    0.496922] PM: Registering ACPI NVS region at dabc3000 (274432 bytes)
Aug 29 08:01:09 blixen kernel: [    0.497079] print_constraints: dummy: 
Aug 29 08:01:09 blixen kernel: [    0.497168] NET: Registered protocol family 16
Aug 29 08:01:09 blixen kernel: [    0.497281] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Aug 29 08:01:09 blixen kernel: [    0.497350] ACPI: bus type pci registered
Aug 29 08:01:09 blixen kernel: [    0.497445] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Aug 29 08:01:09 blixen kernel: [    0.497517] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Aug 29 08:01:09 blixen kernel: [    0.503721] PCI: Using configuration type 1 for base access
Aug 29 08:01:09 blixen kernel: [    0.504311] bio: create slab <bio-0> at 0
Aug 29 08:01:09 blixen kernel: [    0.504423] ACPI: Added _OSI(Module Device)
Aug 29 08:01:09 blixen kernel: [    0.504476] ACPI: Added _OSI(Processor Device)
Aug 29 08:01:09 blixen kernel: [    0.504529] ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 29 08:01:09 blixen kernel: [    0.504583] ACPI: Added _OSI(Processor Aggregator Device)
Aug 29 08:01:09 blixen kernel: [    0.505676] ACPI: EC: Look up EC in DSDT
Aug 29 08:01:09 blixen kernel: [    0.506915] ACPI: Executed 1 blocks of module-level executable AML code
Aug 29 08:01:09 blixen kernel: [    0.520233] ACPI: SSDT 00000000da8eb018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
Aug 29 08:01:09 blixen kernel: [    0.520646] ACPI: Dynamic OEM Table Load:
Aug 29 08:01:09 blixen kernel: [    0.520771] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
Aug 29 08:01:09 blixen kernel: [    0.532090] ACPI: SSDT 00000000da8eca98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
Aug 29 08:01:09 blixen kernel: [    0.532533] ACPI: Dynamic OEM Table Load:
Aug 29 08:01:09 blixen kernel: [    0.532657] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
Aug 29 08:01:09 blixen kernel: [    0.543960] ACPI: SSDT 00000000da8edc18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
Aug 29 08:01:09 blixen kernel: [    0.544362] ACPI: Dynamic OEM Table Load:
Aug 29 08:01:09 blixen kernel: [    0.544486] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
Aug 29 08:01:09 blixen kernel: [    0.556409] ACPI: Interpreter enabled
Aug 29 08:01:09 blixen kernel: [    0.556464] ACPI: (supports S0 S1 S3 S4 S5)
Aug 29 08:01:09 blixen kernel: [    0.556715] ACPI: Using IOAPIC for interrupt routing
Aug 29 08:01:09 blixen kernel: [    0.561380] ACPI: Power Resource [FN00] (off)
Aug 29 08:01:09 blixen kernel: [    0.561494] ACPI: Power Resource [FN01] (off)
Aug 29 08:01:09 blixen kernel: [    0.561610] ACPI: Power Resource [FN02] (off)
Aug 29 08:01:09 blixen kernel: [    0.561723] ACPI: Power Resource [FN03] (off)
Aug 29 08:01:09 blixen kernel: [    0.561836] ACPI: Power Resource [FN04] (off)
Aug 29 08:01:09 blixen kernel: [    0.562241] ACPI: No dock devices found.
Aug 29 08:01:09 blixen kernel: [    0.562294] HEST: Table not found.
Aug 29 08:01:09 blixen kernel: [    0.562347] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 29 08:01:09 blixen kernel: [    0.562676] \_SB_.PCI0:_OSC invalid UUID
Aug 29 08:01:09 blixen kernel: [    0.562677] _OSC request data:1 8 0 
Aug 29 08:01:09 blixen kernel: [    0.562679] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Aug 29 08:01:09 blixen kernel: [    0.563156] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
Aug 29 08:01:09 blixen kernel: [    0.563213] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
Aug 29 08:01:09 blixen kernel: [    0.563270] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
Aug 29 08:01:09 blixen kernel: [    0.563337] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
Aug 29 08:01:09 blixen kernel: [    0.563405] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
Aug 29 08:01:09 blixen kernel: [    0.563473] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
Aug 29 08:01:09 blixen kernel: [    0.563540] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
Aug 29 08:01:09 blixen kernel: [    0.563608] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
Aug 29 08:01:09 blixen kernel: [    0.563676] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
Aug 29 08:01:09 blixen kernel: [    0.563751] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
Aug 29 08:01:09 blixen kernel: [    0.563778] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
Aug 29 08:01:09 blixen kernel: [    0.563800] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.563819] pci 0000:00:02.0: [8086:0112] type 0 class 0x000300
Aug 29 08:01:09 blixen kernel: [    0.563826] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
Aug 29 08:01:09 blixen kernel: [    0.563831] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.563834] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
Aug 29 08:01:09 blixen kernel: [    0.563877] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
Aug 29 08:01:09 blixen kernel: [    0.563898] pci 0000:00:16.0: reg 10: [mem 0xf7f0b000-0xf7f0b00f 64bit]
Aug 29 08:01:09 blixen kernel: [    0.563967] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.563997] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
Aug 29 08:01:09 blixen kernel: [    0.564016] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff]
Aug 29 08:01:09 blixen kernel: [    0.564099] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.564123] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
Aug 29 08:01:09 blixen kernel: [    0.564136] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
Aug 29 08:01:09 blixen kernel: [    0.564198] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.564218] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
Aug 29 08:01:09 blixen kernel: [    0.564291] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.564317] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
Aug 29 08:01:09 blixen kernel: [    0.564390] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.564412] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
Aug 29 08:01:09 blixen kernel: [    0.564485] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.564508] pci 0000:00:1c.7: [8086:244e] type 1 class 0x000604
Aug 29 08:01:09 blixen kernel: [    0.564581] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.564607] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
Aug 29 08:01:09 blixen kernel: [    0.564626] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff]
Aug 29 08:01:09 blixen kernel: [    0.564709] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.564732] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601
Aug 29 08:01:09 blixen kernel: [    0.564847] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
Aug 29 08:01:09 blixen kernel: [    0.564863] pci 0000:00:1f.2: reg 10: [io  0xf0b0-0xf0b7]
Aug 29 08:01:09 blixen kernel: [    0.564870] pci 0000:00:1f.2: reg 14: [io  0xf0a0-0xf0a3]
Aug 29 08:01:09 blixen kernel: [    0.564876] pci 0000:00:1f.2: reg 18: [io  0xf090-0xf097]
Aug 29 08:01:09 blixen kernel: [    0.564883] pci 0000:00:1f.2: reg 1c: [io  0xf080-0xf083]
Aug 29 08:01:09 blixen kernel: [    0.564889] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
Aug 29 08:01:09 blixen kernel: [    0.564896] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff]
Aug 29 08:01:09 blixen kernel: [    0.564936] pci 0000:00:1f.2: PME# supported from D3hot
Aug 29 08:01:09 blixen kernel: [    0.564951] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
Aug 29 08:01:09 blixen kernel: [    0.564965] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit]
Aug 29 08:01:09 blixen kernel: [    0.564983] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
Aug 29 08:01:09 blixen kernel: [    0.565030] pci 0000:01:00.0: [1b4b:9230] type 0 class 0x000106
Aug 29 08:01:09 blixen kernel: [    0.565037] pci 0000:01:00.0: reg 10: [io  0xe050-0xe057]
Aug 29 08:01:09 blixen kernel: [    0.565043] pci 0000:01:00.0: reg 14: [io  0xe040-0xe043]
Aug 29 08:01:09 blixen kernel: [    0.565048] pci 0000:01:00.0: reg 18: [io  0xe030-0xe037]
Aug 29 08:01:09 blixen kernel: [    0.565054] pci 0000:01:00.0: reg 1c: [io  0xe020-0xe023]
Aug 29 08:01:09 blixen kernel: [    0.565059] pci 0000:01:00.0: reg 20: [io  0xe000-0xe01f]
Aug 29 08:01:09 blixen kernel: [    0.565065] pci 0000:01:00.0: reg 24: [mem 0xf7e10000-0xf7e107ff]
Aug 29 08:01:09 blixen kernel: [    0.565071] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e0ffff pref]
Aug 29 08:01:09 blixen kernel: [    0.565098] pci 0000:01:00.0: PME# supported from D3hot
Aug 29 08:01:09 blixen kernel: [    0.571809] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Aug 29 08:01:09 blixen kernel: [    0.571875] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
Aug 29 08:01:09 blixen kernel: [    0.571878] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
Aug 29 08:01:09 blixen kernel: [    0.571963] pci 0000:02:00.0: [8086:10d3] type 0 class 0x000200
Aug 29 08:01:09 blixen kernel: [    0.571989] pci 0000:02:00.0: reg 10: [mem 0xf7dc0000-0xf7ddffff]
Aug 29 08:01:09 blixen kernel: [    0.572007] pci 0000:02:00.0: reg 14: [mem 0xf7d00000-0xf7d7ffff]
Aug 29 08:01:09 blixen kernel: [    0.572026] pci 0000:02:00.0: reg 18: [io  0xd000-0xd01f]
Aug 29 08:01:09 blixen kernel: [    0.572044] pci 0000:02:00.0: reg 1c: [mem 0xf7de0000-0xf7de3fff]
Aug 29 08:01:09 blixen kernel: [    0.572097] pci 0000:02:00.0: reg 30: [mem 0xf7d80000-0xf7dbffff pref]
Aug 29 08:01:09 blixen kernel: [    0.572200] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.579807] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
Aug 29 08:01:09 blixen kernel: [    0.579874] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
Aug 29 08:01:09 blixen kernel: [    0.579879] pci 0000:00:1c.0:   bridge window [mem 0xf7d00000-0xf7dfffff]
Aug 29 08:01:09 blixen kernel: [    0.579959] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
Aug 29 08:01:09 blixen kernel: [    0.579987] pci 0000:03:00.0: reg 10: [mem 0xf7c00000-0xf7c07fff 64bit]
Aug 29 08:01:09 blixen kernel: [    0.580129] pci 0000:03:00.0: PME# supported from D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.587798] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
Aug 29 08:01:09 blixen kernel: [    0.587867] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
Aug 29 08:01:09 blixen kernel: [    0.587943] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
Aug 29 08:01:09 blixen kernel: [    0.587962] pci 0000:04:00.0: reg 10: [io  0xc000-0xc0ff]
Aug 29 08:01:09 blixen kernel: [    0.587994] pci 0000:04:00.0: reg 18: [mem 0xf0104000-0xf0104fff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.588014] pci 0000:04:00.0: reg 20: [mem 0xf0100000-0xf0103fff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.588101] pci 0000:04:00.0: supports D1 D2
Aug 29 08:01:09 blixen kernel: [    0.588103] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 29 08:01:09 blixen kernel: [    0.595792] pci 0000:00:1c.6: PCI bridge to [bus 04-04]
Aug 29 08:01:09 blixen kernel: [    0.595859] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
Aug 29 08:01:09 blixen kernel: [    0.595869] pci 0000:00:1c.6:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.595933] pci 0000:05:00.0: [1b21:1080] type 1 class 0x000604
Aug 29 08:01:09 blixen kernel: [    0.596051] pci 0000:00:1c.7: PCI bridge to [bus 05-06] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596116] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.596117] pci 0000:00:1c.7:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596119] pci 0000:00:1c.7:   bridge window [io  0x0d00-0xffff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596120] pci 0000:00:1c.7:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596122] pci 0000:00:1c.7:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596123] pci 0000:00:1c.7:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596125] pci 0000:00:1c.7:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596127] pci 0000:00:1c.7:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596128] pci 0000:00:1c.7:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596130] pci 0000:00:1c.7:   bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596179] pci 0000:06:00.0: [1822:4e35] type 0 class 0x000480
Aug 29 08:01:09 blixen kernel: [    0.596202] pci 0000:06:00.0: reg 10: [mem 0xf0001000-0xf0001fff pref]
Aug 29 08:01:09 blixen kernel: [    0.596322] pci 0000:06:01.0: [1822:4e35] type 0 class 0x000480
Aug 29 08:01:09 blixen kernel: [    0.596344] pci 0000:06:01.0: reg 10: [mem 0xf0000000-0xf0000fff pref]
Aug 29 08:01:09 blixen kernel: [    0.596520] pci 0000:05:00.0: PCI bridge to [bus 06-06] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596596] pci 0000:05:00.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.596598] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596599] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596601] pci 0000:05:00.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596603] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596604] pci 0000:05:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596606] pci 0000:05:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596607] pci 0000:05:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596609] pci 0000:05:00.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596611] pci 0000:05:00.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596612] pci 0000:05:00.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596614] pci 0000:05:00.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596615] pci 0000:05:00.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596617] pci 0000:05:00.0:   bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
Aug 29 08:01:09 blixen kernel: [    0.596648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 29 08:01:09 blixen kernel: [    0.596766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Aug 29 08:01:09 blixen kernel: [    0.596803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Aug 29 08:01:09 blixen kernel: [    0.596834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
Aug 29 08:01:09 blixen kernel: [    0.596864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
Aug 29 08:01:09 blixen kernel: [    0.596896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08.BR10._PRT]
Aug 29 08:01:09 blixen kernel: [    0.596934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
Aug 29 08:01:09 blixen kernel: [    0.597025] \_SB_.PCI0:_OSC invalid UUID
Aug 29 08:01:09 blixen kernel: [    0.597025] _OSC request data:1 1f 0 
Aug 29 08:01:09 blixen kernel: [    0.597028]  pci0000:00: Requesting ACPI _OSC control (0x1d)
Aug 29 08:01:09 blixen kernel: [    0.597121] \_SB_.PCI0:_OSC invalid UUID
Aug 29 08:01:09 blixen kernel: [    0.597122] _OSC request data:1 0 1d 
Aug 29 08:01:09 blixen kernel: [    0.597124]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
Aug 29 08:01:09 blixen kernel: [    0.597193] ACPI _OSC control for PCIe not granted, disabling ASPM
Aug 29 08:01:09 blixen kernel: [    0.600729] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Aug 29 08:01:09 blixen kernel: [    0.601217] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
Aug 29 08:01:09 blixen kernel: [    0.601702] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
Aug 29 08:01:09 blixen kernel: [    0.602188] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
Aug 29 08:01:09 blixen kernel: [    0.602673] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Aug 29 08:01:09 blixen kernel: [    0.603242] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
Aug 29 08:01:09 blixen kernel: [    0.603729] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
Aug 29 08:01:09 blixen kernel: [    0.604217] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
Aug 29 08:01:09 blixen kernel: [    0.604731] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Aug 29 08:01:09 blixen kernel: [    0.604805] vgaarb: loaded
Aug 29 08:01:09 blixen kernel: [    0.604855] vgaarb: bridge control possible 0000:00:02.0
Aug 29 08:01:09 blixen kernel: [    0.604934] PCI: Using ACPI for IRQ routing
Aug 29 08:01:09 blixen kernel: [    0.606372] PCI: pci_cache_line_size set to 64 bytes
Aug 29 08:01:09 blixen kernel: [    0.606441] reserve RAM buffer: 000000000009c000 - 000000000009ffff 
Aug 29 08:01:09 blixen kernel: [    0.606443] reserve RAM buffer: 00000000da38d000 - 00000000dbffffff 
Aug 29 08:01:09 blixen kernel: [    0.606445] reserve RAM buffer: 00000000db000000 - 00000000dbffffff 
Aug 29 08:01:09 blixen kernel: [    0.606446] reserve RAM buffer: 000000021f600000 - 000000021fffffff 
Aug 29 08:01:09 blixen kernel: [    0.606518] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Aug 29 08:01:09 blixen kernel: [    0.606900] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Aug 29 08:01:09 blixen kernel: [    0.608968] Switching to clocksource hpet
Aug 29 08:01:09 blixen kernel: [    0.610199] pnp: PnP ACPI init
Aug 29 08:01:09 blixen kernel: [    0.610256] ACPI: bus type pnp registered
Aug 29 08:01:09 blixen kernel: [    0.610523] pnp 00:00: [bus 00-3e]
Aug 29 08:01:09 blixen kernel: [    0.610525] pnp 00:00: [io  0x0000-0x0cf7 window]
Aug 29 08:01:09 blixen kernel: [    0.610527] pnp 00:00: [io  0x0cf8-0x0cff]
Aug 29 08:01:09 blixen kernel: [    0.610528] pnp 00:00: [io  0x0d00-0xffff window]
Aug 29 08:01:09 blixen kernel: [    0.610529] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Aug 29 08:01:09 blixen kernel: [    0.610531] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
Aug 29 08:01:09 blixen kernel: [    0.610532] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
Aug 29 08:01:09 blixen kernel: [    0.610533] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
Aug 29 08:01:09 blixen kernel: [    0.610534] pnp 00:00: [mem 0x000cc000-0x000cffff window]
Aug 29 08:01:09 blixen kernel: [    0.610536] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
Aug 29 08:01:09 blixen kernel: [    0.610537] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
Aug 29 08:01:09 blixen kernel: [    0.610538] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
Aug 29 08:01:09 blixen kernel: [    0.610539] pnp 00:00: [mem 0x000dc000-0x000dffff window]
Aug 29 08:01:09 blixen kernel: [    0.610541] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
Aug 29 08:01:09 blixen kernel: [    0.610542] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
Aug 29 08:01:09 blixen kernel: [    0.610543] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
Aug 29 08:01:09 blixen kernel: [    0.610544] pnp 00:00: [mem 0x000ec000-0x000effff window]
Aug 29 08:01:09 blixen kernel: [    0.610545] pnp 00:00: [mem 0x000f0000-0x000fffff window]
Aug 29 08:01:09 blixen kernel: [    0.610547] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
Aug 29 08:01:09 blixen kernel: [    0.610548] pnp 00:00: [mem 0x00010000-0x0001ffff window]
Aug 29 08:01:09 blixen kernel: [    0.610581] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
Aug 29 08:01:09 blixen kernel: [    0.610594] pnp 00:01: [mem 0xfed40000-0xfed44fff]
Aug 29 08:01:09 blixen kernel: [    0.610620] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.610678] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
Aug 29 08:01:09 blixen kernel: [    0.610686] pnp 00:02: [io  0x0000-0x001f]
Aug 29 08:01:09 blixen kernel: [    0.610688] pnp 00:02: [io  0x0081-0x0091]
Aug 29 08:01:09 blixen kernel: [    0.610689] pnp 00:02: [io  0x0093-0x009f]
Aug 29 08:01:09 blixen kernel: [    0.610690] pnp 00:02: [io  0x00c0-0x00df]
Aug 29 08:01:09 blixen kernel: [    0.610691] pnp 00:02: [dma 4]
Aug 29 08:01:09 blixen kernel: [    0.610705] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
Aug 29 08:01:09 blixen kernel: [    0.610711] pnp 00:03: [mem 0xff000000-0xffffffff]
Aug 29 08:01:09 blixen kernel: [    0.610725] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
Aug 29 08:01:09 blixen kernel: [    0.610782] pnp 00:04: [mem 0xfed00000-0xfed003ff]
Aug 29 08:01:09 blixen kernel: [    0.610797] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
Aug 29 08:01:09 blixen kernel: [    0.610806] pnp 00:05: [io  0x002e-0x002f]
Aug 29 08:01:09 blixen kernel: [    0.610807] pnp 00:05: [io  0x004e-0x004f]
Aug 29 08:01:09 blixen kernel: [    0.610809] pnp 00:05: [io  0x0061]
Aug 29 08:01:09 blixen kernel: [    0.610809] pnp 00:05: [io  0x0063]
Aug 29 08:01:09 blixen kernel: [    0.610810] pnp 00:05: [io  0x0065]
Aug 29 08:01:09 blixen kernel: [    0.610811] pnp 00:05: [io  0x0067]
Aug 29 08:01:09 blixen kernel: [    0.610812] pnp 00:05: [io  0x0070]
Aug 29 08:01:09 blixen kernel: [    0.610813] pnp 00:05: [io  0x0080]
Aug 29 08:01:09 blixen kernel: [    0.610814] pnp 00:05: [io  0x0092]
Aug 29 08:01:09 blixen kernel: [    0.610815] pnp 00:05: [io  0x00b2-0x00b3]
Aug 29 08:01:09 blixen kernel: [    0.610816] pnp 00:05: [io  0x0680-0x069f]
Aug 29 08:01:09 blixen kernel: [    0.610817] pnp 00:05: [io  0x0200-0x020f]
Aug 29 08:01:09 blixen kernel: [    0.610819] pnp 00:05: [io  0xffff]
Aug 29 08:01:09 blixen kernel: [    0.610820] pnp 00:05: [io  0xffff]
Aug 29 08:01:09 blixen kernel: [    0.610821] pnp 00:05: [io  0x0400-0x0453]
Aug 29 08:01:09 blixen kernel: [    0.610822] pnp 00:05: [io  0x0458-0x047f]
Aug 29 08:01:09 blixen kernel: [    0.610823] pnp 00:05: [io  0x0500-0x057f]
Aug 29 08:01:09 blixen kernel: [    0.610824] pnp 00:05: [io  0x164e-0x164f]
Aug 29 08:01:09 blixen kernel: [    0.610854] system 00:05: [io  0x0680-0x069f] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.610910] system 00:05: [io  0x0200-0x020f] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.610966] system 00:05: [io  0xffff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.611021] system 00:05: [io  0xffff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.611076] system 00:05: [io  0x0400-0x0453] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.611131] system 00:05: [io  0x0458-0x047f] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.611187] system 00:05: [io  0x0500-0x057f] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.611243] system 00:05: [io  0x164e-0x164f] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.611299] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 29 08:01:09 blixen kernel: [    0.611305] pnp 00:06: [io  0x0070-0x0077]
Aug 29 08:01:09 blixen kernel: [    0.611311] pnp 00:06: [irq 8]
Aug 29 08:01:09 blixen kernel: [    0.611325] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
Aug 29 08:01:09 blixen kernel: [    0.611346] pnp 00:07: [io  0x0454-0x0457]
Aug 29 08:01:09 blixen kernel: [    0.611371] system 00:07: [io  0x0454-0x0457] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.611427] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Aug 29 08:01:09 blixen kernel: [    0.611474] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
Aug 29 08:01:09 blixen kernel: [    0.611476] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
Aug 29 08:01:09 blixen kernel: [    0.611477] pnp 00:08: [io  0x0290-0x029f]
Aug 29 08:01:09 blixen kernel: [    0.611478] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
Aug 29 08:01:09 blixen kernel: [    0.611505] system 00:08: [io  0x0290-0x029f] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.611561] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 29 08:01:09 blixen kernel: [    0.611678] pnp 00:09: [io  0x0010-0x001f]
Aug 29 08:01:09 blixen kernel: [    0.611679] pnp 00:09: [io  0x0022-0x003f]
Aug 29 08:01:09 blixen kernel: [    0.611680] pnp 00:09: [io  0x0044-0x005f]
Aug 29 08:01:09 blixen kernel: [    0.611681] pnp 00:09: [io  0x0062-0x0063]
Aug 29 08:01:09 blixen kernel: [    0.611682] pnp 00:09: [io  0x0065-0x006f]
Aug 29 08:01:09 blixen kernel: [    0.611684] pnp 00:09: [io  0x0072-0x007f]
Aug 29 08:01:09 blixen kernel: [    0.611685] pnp 00:09: [io  0x0080]
Aug 29 08:01:09 blixen kernel: [    0.611686] pnp 00:09: [io  0x0084-0x0086]
Aug 29 08:01:09 blixen kernel: [    0.611687] pnp 00:09: [io  0x0088]
Aug 29 08:01:09 blixen kernel: [    0.611688] pnp 00:09: [io  0x008c-0x008e]
Aug 29 08:01:09 blixen kernel: [    0.611690] pnp 00:09: [io  0x0090-0x009f]
Aug 29 08:01:09 blixen kernel: [    0.611691] pnp 00:09: [io  0x00a2-0x00bf]
Aug 29 08:01:09 blixen kernel: [    0.611692] pnp 00:09: [io  0x00e0-0x00ef]
Aug 29 08:01:09 blixen kernel: [    0.611693] pnp 00:09: [io  0x04d0-0x04d1]
Aug 29 08:01:09 blixen kernel: [    0.611722] system 00:09: [io  0x04d0-0x04d1] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.611802] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 29 08:01:09 blixen kernel: [    0.611808] pnp 00:0a: [io  0x00f0-0x00ff]
Aug 29 08:01:09 blixen kernel: [    0.611812] pnp 00:0a: [irq 13]
Aug 29 08:01:09 blixen kernel: [    0.611829] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
Aug 29 08:01:09 blixen kernel: [    0.612120] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
Aug 29 08:01:09 blixen kernel: [    0.612122] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
Aug 29 08:01:09 blixen kernel: [    0.612123] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
Aug 29 08:01:09 blixen kernel: [    0.612124] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
Aug 29 08:01:09 blixen kernel: [    0.612125] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
Aug 29 08:01:09 blixen kernel: [    0.612127] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
Aug 29 08:01:09 blixen kernel: [    0.612128] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
Aug 29 08:01:09 blixen kernel: [    0.612129] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
Aug 29 08:01:09 blixen kernel: [    0.612130] pnp 00:0b: [mem 0xff000000-0xffffffff]
Aug 29 08:01:09 blixen kernel: [    0.612131] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
Aug 29 08:01:09 blixen kernel: [    0.612133] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
Aug 29 08:01:09 blixen kernel: [    0.612174] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612231] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612288] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612345] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612402] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612458] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612515] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612572] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612629] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612686] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
Aug 29 08:01:09 blixen kernel: [    0.612744] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.612801] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 29 08:01:09 blixen kernel: [    0.612916] pnp 00:0c: [mem 0x20000000-0x201fffff]
Aug 29 08:01:09 blixen kernel: [    0.612917] pnp 00:0c: [mem 0x40000000-0x401fffff]
Aug 29 08:01:09 blixen kernel: [    0.612956] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.613017] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
Aug 29 08:01:09 blixen kernel: [    0.613074] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Aug 29 08:01:09 blixen kernel: [    0.613092] pnp: PnP ACPI: found 13 devices
Aug 29 08:01:09 blixen kernel: [    0.613145] ACPI: ACPI bus type pnp unregistered
Aug 29 08:01:09 blixen kernel: [    0.619114] PCI: max bus depth: 2 pci_try_num: 3
Aug 29 08:01:09 blixen kernel: [    0.619157] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Aug 29 08:01:09 blixen kernel: [    0.619213] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
Aug 29 08:01:09 blixen kernel: [    0.619270] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
Aug 29 08:01:09 blixen kernel: [    0.619328] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
Aug 29 08:01:09 blixen kernel: [    0.619384] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
Aug 29 08:01:09 blixen kernel: [    0.619442] pci 0000:00:1c.0:   bridge window [mem 0xf7d00000-0xf7dfffff]
Aug 29 08:01:09 blixen kernel: [    0.619505] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
Aug 29 08:01:09 blixen kernel: [    0.619562] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
Aug 29 08:01:09 blixen kernel: [    0.619625] pci 0000:00:1c.6: PCI bridge to [bus 04-04]
Aug 29 08:01:09 blixen kernel: [    0.619680] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
Aug 29 08:01:09 blixen kernel: [    0.619740] pci 0000:00:1c.6:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.619813] pci 0000:05:00.0: PCI bridge to [bus 06-06]
Aug 29 08:01:09 blixen kernel: [    0.619877] pci 0000:05:00.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.619953] pci 0000:00:1c.7: PCI bridge to [bus 05-06]
Aug 29 08:01:09 blixen kernel: [    0.620012] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.620092] pci 0000:00:01.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    0.620100] pci 0000:00:1c.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    0.620110] pci 0000:00:1c.5: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    0.620119] pci 0000:00:1c.6: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    0.620129] pci 0000:00:1c.7: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    0.620141] pci 0000:05:00.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    0.620145] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
Aug 29 08:01:09 blixen kernel: [    0.620146] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
Aug 29 08:01:09 blixen kernel: [    0.620148] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Aug 29 08:01:09 blixen kernel: [    0.620149] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
Aug 29 08:01:09 blixen kernel: [    0.620150] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
Aug 29 08:01:09 blixen kernel: [    0.620151] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
Aug 29 08:01:09 blixen kernel: [    0.620153] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
Aug 29 08:01:09 blixen kernel: [    0.620154] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
Aug 29 08:01:09 blixen kernel: [    0.620155] pci_bus 0000:00: resource 12 [mem 0xdfa00000-0xfeafffff]
Aug 29 08:01:09 blixen kernel: [    0.620156] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
Aug 29 08:01:09 blixen kernel: [    0.620158] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
Aug 29 08:01:09 blixen kernel: [    0.620159] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
Aug 29 08:01:09 blixen kernel: [    0.620160] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
Aug 29 08:01:09 blixen kernel: [    0.620162] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
Aug 29 08:01:09 blixen kernel: [    0.620163] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
Aug 29 08:01:09 blixen kernel: [    0.620164] pci_bus 0000:04: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.620166] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.620167] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
Aug 29 08:01:09 blixen kernel: [    0.620168] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
Aug 29 08:01:09 blixen kernel: [    0.620169] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
Aug 29 08:01:09 blixen kernel: [    0.620171] pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000d7fff]
Aug 29 08:01:09 blixen kernel: [    0.620172] pci_bus 0000:05: resource 8 [mem 0x000d8000-0x000dbfff]
Aug 29 08:01:09 blixen kernel: [    0.620173] pci_bus 0000:05: resource 9 [mem 0x000dc000-0x000dffff]
Aug 29 08:01:09 blixen kernel: [    0.620174] pci_bus 0000:05: resource 10 [mem 0x000e0000-0x000e3fff]
Aug 29 08:01:09 blixen kernel: [    0.620176] pci_bus 0000:05: resource 11 [mem 0x000e4000-0x000e7fff]
Aug 29 08:01:09 blixen kernel: [    0.620177] pci_bus 0000:05: resource 12 [mem 0xdfa00000-0xfeafffff]
Aug 29 08:01:09 blixen kernel: [    0.620178] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.620180] pci_bus 0000:06: resource 6 [mem 0xf0000000-0xf00fffff 64bit pref]
Aug 29 08:01:09 blixen kernel: [    0.620181] pci_bus 0000:06: resource 8 [io  0x0000-0x0cf7]
Aug 29 08:01:09 blixen kernel: [    0.620182] pci_bus 0000:06: resource 9 [io  0x0d00-0xffff]
Aug 29 08:01:09 blixen kernel: [    0.620183] pci_bus 0000:06: resource 10 [mem 0x000a0000-0x000bffff]
Aug 29 08:01:09 blixen kernel: [    0.620184] pci_bus 0000:06: resource 11 [mem 0x000d4000-0x000d7fff]
Aug 29 08:01:09 blixen kernel: [    0.620186] pci_bus 0000:06: resource 12 [mem 0x000d8000-0x000dbfff]
Aug 29 08:01:09 blixen kernel: [    0.620187] pci_bus 0000:06: resource 13 [mem 0x000dc000-0x000dffff]
Aug 29 08:01:09 blixen kernel: [    0.620188] pci_bus 0000:06: resource 14 [mem 0x000e0000-0x000e3fff]
Aug 29 08:01:09 blixen kernel: [    0.620189] pci_bus 0000:06: resource 15 [mem 0x000e4000-0x000e7fff]
Aug 29 08:01:09 blixen kernel: [    0.620191] pci_bus 0000:06: resource 16 [mem 0xdfa00000-0xfeafffff]
Aug 29 08:01:09 blixen kernel: [    0.620234] NET: Registered protocol family 2
Aug 29 08:01:09 blixen kernel: [    0.620409] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 29 08:01:09 blixen kernel: [    0.621042] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Aug 29 08:01:09 blixen kernel: [    0.622057] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 29 08:01:09 blixen kernel: [    0.622230] TCP: Hash tables configured (established 524288 bind 65536)
Aug 29 08:01:09 blixen kernel: [    0.622287] TCP reno registered
Aug 29 08:01:09 blixen kernel: [    0.622346] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Aug 29 08:01:09 blixen kernel: [    0.622424] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Aug 29 08:01:09 blixen kernel: [    0.622564] NET: Registered protocol family 1
Aug 29 08:01:09 blixen kernel: [    0.622627] pci 0000:00:02.0: Boot video device
Aug 29 08:01:09 blixen kernel: [    0.872884] PCI: CLS 64 bytes, default 64
Aug 29 08:01:09 blixen kernel: [    0.872918] Unpacking initramfs...
Aug 29 08:01:09 blixen kernel: [    1.044068] Freeing initrd memory: 12196k freed
Aug 29 08:01:09 blixen kernel: [    1.045190] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Aug 29 08:01:09 blixen kernel: [    1.045250] Placing 64MB software IO TLB between ffff8800d638d000 - ffff8800da38d000
Aug 29 08:01:09 blixen kernel: [    1.045318] software IO TLB at phys 0xd638d000 - 0xda38d000
Aug 29 08:01:09 blixen kernel: [    1.045728] audit: initializing netlink socket (disabled)
Aug 29 08:01:09 blixen kernel: [    1.045789] type=2000 audit(1409291848.884:1): initialized
Aug 29 08:01:09 blixen kernel: [    1.056280] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Aug 29 08:01:09 blixen kernel: [    1.056899] VFS: Disk quotas dquot_6.5.2
Aug 29 08:01:09 blixen kernel: [    1.056969] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Aug 29 08:01:09 blixen kernel: [    1.057071] msgmni has been set to 15802
Aug 29 08:01:09 blixen kernel: [    1.057216] alg: No test for stdrng (krng)
Aug 29 08:01:09 blixen kernel: [    1.057286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Aug 29 08:01:09 blixen kernel: [    1.057354] io scheduler noop registered
Aug 29 08:01:09 blixen kernel: [    1.057407] io scheduler deadline registered
Aug 29 08:01:09 blixen kernel: [    1.057472] io scheduler cfq registered (default)
Aug 29 08:01:09 blixen kernel: [    1.057580] pcieport 0000:00:01.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    1.057598] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.057757] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 29 08:01:09 blixen kernel: [    1.057823] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Aug 29 08:01:09 blixen kernel: [    1.057880] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Aug 29 08:01:09 blixen kernel: [    1.058194] intel_idle: MWAIT substates: 0x1120
Aug 29 08:01:09 blixen kernel: [    1.058195] intel_idle: v0.4 model 0x2A
Aug 29 08:01:09 blixen kernel: [    1.058196] intel_idle: lapic_timer_reliable_states 0xffffffff
Aug 29 08:01:09 blixen kernel: [    1.058218] ERST: Table is not found!
Aug 29 08:01:09 blixen kernel: [    1.058271] GHES: HEST is not enabled!
Aug 29 08:01:09 blixen kernel: [    1.058352] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Aug 29 08:01:09 blixen kernel: [    1.176920] Linux agpgart interface v0.103
Aug 29 08:01:09 blixen kernel: [    1.177027] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
Aug 29 08:01:09 blixen kernel: [    1.177140] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
Aug 29 08:01:09 blixen kernel: [    1.177915] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
Aug 29 08:01:09 blixen kernel: [    1.178055] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
Aug 29 08:01:09 blixen kernel: [    1.178196] i8042: PNP: No PS/2 controller found. Probing ports directly.
Aug 29 08:01:09 blixen kernel: [    1.180976] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 29 08:01:09 blixen kernel: [    1.181035] serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 29 08:01:09 blixen kernel: [    1.181168] mousedev: PS/2 mouse device common for all mice
Aug 29 08:01:09 blixen kernel: [    1.181253] rtc_cmos 00:06: RTC can wake from S4
Aug 29 08:01:09 blixen kernel: [    1.181396] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Aug 29 08:01:09 blixen kernel: [    1.181475] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Aug 29 08:01:09 blixen kernel: [    1.181586] cpuidle: using governor ladder
Aug 29 08:01:09 blixen kernel: [    1.181698] cpuidle: using governor menu
Aug 29 08:01:09 blixen kernel: [    1.181860] TCP cubic registered
Aug 29 08:01:09 blixen kernel: [    1.182110] NET: Registered protocol family 10
Aug 29 08:01:09 blixen kernel: [    1.182590] Mobile IPv6
Aug 29 08:01:09 blixen kernel: [    1.182641] NET: Registered protocol family 17
Aug 29 08:01:09 blixen kernel: [    1.182695] Registering the dns_resolver key type
Aug 29 08:01:09 blixen kernel: [    1.184229] PM: Hibernation image not present or could not be loaded.
Aug 29 08:01:09 blixen kernel: [    1.184239] registered taskstats version 1
Aug 29 08:01:09 blixen kernel: [    1.184870] rtc_cmos 00:06: setting system clock to 2014-08-29 05:57:29 UTC (1409291849)
Aug 29 08:01:09 blixen kernel: [    1.184983] Initializing network drop monitor service
Aug 29 08:01:09 blixen kernel: [    1.185741] Freeing unused kernel memory: 580k freed
Aug 29 08:01:09 blixen kernel: [    1.185845] Write protecting the kernel read-only data: 6144k
Aug 29 08:01:09 blixen kernel: [    1.187532] Freeing unused kernel memory: 648k freed
Aug 29 08:01:09 blixen kernel: [    1.189220] Freeing unused kernel memory: 688k freed
Aug 29 08:01:09 blixen kernel: [    1.240983] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
Aug 29 08:01:09 blixen kernel: [    1.241042] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
Aug 29 08:01:09 blixen kernel: [    1.241152] e1000e 0000:02:00.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    1.241253] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Aug 29 08:01:09 blixen kernel: [    1.241413] e1000e 0000:02:00.0: irq 41 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.241416] e1000e 0000:02:00.0: irq 42 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.241419] e1000e 0000:02:00.0: irq 43 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.244714] SCSI subsystem initialized
Aug 29 08:01:09 blixen kernel: [    1.247558] usbcore: registered new interface driver usbfs
Aug 29 08:01:09 blixen kernel: [    1.247632] usbcore: registered new interface driver hub
Aug 29 08:01:09 blixen kernel: [    1.254574] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Aug 29 08:01:09 blixen kernel: [    1.254677] r8169 0000:04:00.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    1.254737] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.254989] r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xffffc90000c7c000, 14:da:e9:ed:d6:04, XID 0c200000 IRQ 44
Aug 29 08:01:09 blixen kernel: [    1.255063] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Aug 29 08:01:09 blixen kernel: [    1.258523] ACPI: Fan [FAN0] (off)
Aug 29 08:01:09 blixen kernel: [    1.258603] ACPI: Fan [FAN1] (off)
Aug 29 08:01:09 blixen kernel: [    1.258677] ACPI: Fan [FAN2] (off)
Aug 29 08:01:09 blixen kernel: [    1.258751] ACPI: Fan [FAN3] (off)
Aug 29 08:01:09 blixen kernel: [    1.258827] ACPI: Fan [FAN4] (off)
Aug 29 08:01:09 blixen kernel: [    1.261406] usbcore: registered new device driver usb
Aug 29 08:01:09 blixen kernel: [    1.261739] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 29 08:01:09 blixen kernel: [    1.261833] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    1.261835] ehci_hcd 0000:00:1a.0: EHCI Host Controller
Aug 29 08:01:09 blixen kernel: [    1.261905] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Aug 29 08:01:09 blixen kernel: [    1.261995] ehci_hcd 0000:00:1a.0: debug port 2
Aug 29 08:01:09 blixen kernel: [    1.265917] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
Aug 29 08:01:09 blixen kernel: [    1.267059] libata version 3.00 loaded.
Aug 29 08:01:09 blixen kernel: [    1.268248] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf7f08000
Aug 29 08:01:09 blixen kernel: [    1.270571] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Aug 29 08:01:09 blixen kernel: [    1.272908] xhci_hcd 0000:03:00.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    1.272912] xhci_hcd 0000:03:00.0: xHCI Host Controller
Aug 29 08:01:09 blixen kernel: [    1.272976] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
Aug 29 08:01:09 blixen kernel: [    1.277540] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.277543] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.277546] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.277549] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.277551] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.277640] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Aug 29 08:01:09 blixen kernel: [    1.277698] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 29 08:01:09 blixen kernel: [    1.277765] usb usb2: Product: xHCI Host Controller
Aug 29 08:01:09 blixen kernel: [    1.277819] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
Aug 29 08:01:09 blixen kernel: [    1.277875] usb usb2: SerialNumber: 0000:03:00.0
Aug 29 08:01:09 blixen kernel: [    1.278011] xHCI xhci_add_endpoint called for root hub
Aug 29 08:01:09 blixen kernel: [    1.278012] xHCI xhci_check_bandwidth called for root hub
Aug 29 08:01:09 blixen kernel: [    1.278031] hub 2-0:1.0: USB hub found
Aug 29 08:01:09 blixen kernel: [    1.278091] hub 2-0:1.0: 2 ports detected
Aug 29 08:01:09 blixen kernel: [    1.278187] xhci_hcd 0000:03:00.0: xHCI Host Controller
Aug 29 08:01:09 blixen kernel: [    1.278244] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
Aug 29 08:01:09 blixen kernel: [    1.278329] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
Aug 29 08:01:09 blixen kernel: [    1.278386] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 29 08:01:09 blixen kernel: [    1.278453] usb usb3: Product: xHCI Host Controller
Aug 29 08:01:09 blixen kernel: [    1.278507] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
Aug 29 08:01:09 blixen kernel: [    1.278562] usb usb3: SerialNumber: 0000:03:00.0
Aug 29 08:01:09 blixen kernel: [    1.278689] xHCI xhci_add_endpoint called for root hub
Aug 29 08:01:09 blixen kernel: [    1.278690] xHCI xhci_check_bandwidth called for root hub
Aug 29 08:01:09 blixen kernel: [    1.278706] hub 3-0:1.0: USB hub found
Aug 29 08:01:09 blixen kernel: [    1.278765] hub 3-0:1.0: 2 ports detected
Aug 29 08:01:09 blixen kernel: [    1.280464] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Aug 29 08:01:09 blixen kernel: [    1.280556] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Aug 29 08:01:09 blixen kernel: [    1.280614] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 29 08:01:09 blixen kernel: [    1.280683] usb usb1: Product: EHCI Host Controller
Aug 29 08:01:09 blixen kernel: [    1.280738] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
Aug 29 08:01:09 blixen kernel: [    1.280797] usb usb1: SerialNumber: 0000:00:1a.0
Aug 29 08:01:09 blixen kernel: [    1.280972] hub 1-0:1.0: USB hub found
Aug 29 08:01:09 blixen kernel: [    1.281031] hub 1-0:1.0: 2 ports detected
Aug 29 08:01:09 blixen kernel: [    1.281192] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    1.281194] ehci_hcd 0000:00:1d.0: EHCI Host Controller
Aug 29 08:01:09 blixen kernel: [    1.281252] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
Aug 29 08:01:09 blixen kernel: [    1.281337] ehci_hcd 0000:00:1d.0: debug port 2
Aug 29 08:01:09 blixen kernel: [    1.284765] thermal LNXTHERM:00: registered as thermal_zone0
Aug 29 08:01:09 blixen kernel: [    1.284851] ACPI: Thermal Zone [TZ00] (28 C)
Aug 29 08:01:09 blixen kernel: [    1.285050] thermal LNXTHERM:01: registered as thermal_zone1
Aug 29 08:01:09 blixen kernel: [    1.285133] ACPI: Thermal Zone [TZ01] (30 C)
Aug 29 08:01:09 blixen kernel: [    1.285278] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
Aug 29 08:01:09 blixen kernel: [    1.285283] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
Aug 29 08:01:09 blixen kernel: [    1.300476] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Aug 29 08:01:09 blixen kernel: [    1.300563] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Aug 29 08:01:09 blixen kernel: [    1.300628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 29 08:01:09 blixen kernel: [    1.300695] usb usb4: Product: EHCI Host Controller
Aug 29 08:01:09 blixen kernel: [    1.300748] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
Aug 29 08:01:09 blixen kernel: [    1.300804] usb usb4: SerialNumber: 0000:00:1d.0
Aug 29 08:01:09 blixen kernel: [    1.300981] hub 4-0:1.0: USB hub found
Aug 29 08:01:09 blixen kernel: [    1.301038] hub 4-0:1.0: 2 ports detected
Aug 29 08:01:09 blixen kernel: [    1.301175] ahci 0000:00:1f.2: version 3.0
Aug 29 08:01:09 blixen kernel: [    1.301219] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.316489] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
Aug 29 08:01:09 blixen kernel: [    1.316574] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
Aug 29 08:01:09 blixen kernel: [    1.316643] ahci 0000:00:1f.2: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    1.348038] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:0d:52:c8
Aug 29 08:01:09 blixen kernel: [    1.348109] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
Aug 29 08:01:09 blixen kernel: [    1.348178] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-007
Aug 29 08:01:09 blixen kernel: [    1.357046] scsi0 : ahci
Aug 29 08:01:09 blixen kernel: [    1.357261] scsi1 : ahci
Aug 29 08:01:09 blixen kernel: [    1.357446] scsi2 : ahci
Aug 29 08:01:09 blixen kernel: [    1.357587] scsi3 : ahci
Aug 29 08:01:09 blixen kernel: [    1.357742] scsi4 : ahci
Aug 29 08:01:09 blixen kernel: [    1.357898] scsi5 : ahci
Aug 29 08:01:09 blixen kernel: [    1.358192] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 50
Aug 29 08:01:09 blixen kernel: [    1.358265] ata2: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06180 irq 50
Aug 29 08:01:09 blixen kernel: [    1.358333] ata3: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06200 irq 50
Aug 29 08:01:09 blixen kernel: [    1.358401] ata4: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06280 irq 50
Aug 29 08:01:09 blixen kernel: [    1.358470] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 50
Aug 29 08:01:09 blixen kernel: [    1.358538] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 50
Aug 29 08:01:09 blixen kernel: [    1.358693] ahci 0000:01:00.0: irq 51 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [    1.358701] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
Aug 29 08:01:09 blixen kernel: [    1.372448] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
Aug 29 08:01:09 blixen kernel: [    1.372528] ahci 0000:01:00.0: flags: 64bit ncq fbs pio 
Aug 29 08:01:09 blixen kernel: [    1.372585] ahci 0000:01:00.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [    1.373235] scsi6 : ahci
Aug 29 08:01:09 blixen kernel: [    1.373410] scsi7 : ahci
Aug 29 08:01:09 blixen kernel: [    1.373584] scsi8 : ahci
Aug 29 08:01:09 blixen kernel: [    1.373784] scsi9 : ahci
Aug 29 08:01:09 blixen kernel: [    1.373994] scsi10 : ahci
Aug 29 08:01:09 blixen kernel: [    1.374165] scsi11 : ahci
Aug 29 08:01:09 blixen kernel: [    1.374326] scsi12 : ahci
Aug 29 08:01:09 blixen kernel: [    1.374484] scsi13 : ahci
Aug 29 08:01:09 blixen kernel: [    1.374578] ata7: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10100 irq 51
Aug 29 08:01:09 blixen kernel: [    1.374648] ata8: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10180 irq 51
Aug 29 08:01:09 blixen kernel: [    1.374716] ata9: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10200 irq 51
Aug 29 08:01:09 blixen kernel: [    1.374784] ata10: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10280 irq 51
Aug 29 08:01:09 blixen kernel: [    1.374852] ata11: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10300 irq 51
Aug 29 08:01:09 blixen kernel: [    1.374920] ata12: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10380 irq 51
Aug 29 08:01:09 blixen kernel: [    1.374989] ata13: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10400 irq 51
Aug 29 08:01:09 blixen kernel: [    1.375057] ata14: SATA max UDMA/133 abar m2048@0xf7e10000 port 0xf7e10480 irq 51
Aug 29 08:01:09 blixen kernel: [    1.631695] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
Aug 29 08:01:09 blixen kernel: [    1.651165] usb 3-2: New USB device found, idVendor=1234, idProduct=5678
Aug 29 08:01:09 blixen kernel: [    1.651240] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 29 08:01:09 blixen kernel: [    1.651297] usb 3-2: Product: VLI Product String
Aug 29 08:01:09 blixen kernel: [    1.651351] usb 3-2: Manufacturer: VLI manufacture String
Aug 29 08:01:09 blixen kernel: [    1.651405] usb 3-2: SerialNumber: SD00000000065495
Aug 29 08:01:09 blixen kernel: [    1.654211] Initializing USB Mass Storage driver...
Aug 29 08:01:09 blixen kernel: [    1.654423] scsi14 : usb-storage 3-2:1.0
Aug 29 08:01:09 blixen kernel: [    1.654523] usbcore: registered new interface driver usb-storage
Aug 29 08:01:09 blixen kernel: [    1.654581] USB Mass Storage support registered.
Aug 29 08:01:09 blixen kernel: [    1.680170] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.680262] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.680334] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.680407] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.680479] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.680549] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.680650] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.680835] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021648be48), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.681099] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.681283] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021648bfb0), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.681528] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.681712] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88021648bf38), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.681951] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.682135] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88021648bec0), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.682364] ata4.00: ATA-9: M4-CT064M4SSD2, 040H, max UDMA/100
Aug 29 08:01:09 blixen kernel: [    1.682427] ata4.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 29 08:01:09 blixen kernel: [    1.682512] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.682696] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88021648bdd0), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.682936] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.683122] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88021648bd58), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.684636] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.684699] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 29 08:01:09 blixen kernel: [    1.684774] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.684835] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 29 08:01:09 blixen kernel: [    1.684918] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.685098] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021648be48), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.685328] ata1.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.685389] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 29 08:01:09 blixen kernel: [    1.685506] ata4.00: configured for UDMA/100
Aug 29 08:01:09 blixen kernel: [    1.685584] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.685657] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 29 08:01:09 blixen kernel: [    1.685761] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.685944] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88021648bec0), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.686194] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.686377] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021648bfb0), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.686625] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.686810] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88021648bd58), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.687039] ata3.00: configured for UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.687103] ata1.00: configured for UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.687179] ACPI Error: [DSSP]
Aug 29 08:01:09 blixen kernel: [    1.687242] scsi 0:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5
Aug 29 08:01:09 blixen kernel: [    1.687394]  Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.687490] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88021648bdd0), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.687726] ata6.00: configured for UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.687829] ata5.00: configured for UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.692116] ata9: SATA link down (SStatus 0 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.692203] ata12: SATA link down (SStatus 0 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.692272] ata10: SATA link down (SStatus 0 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.700145] ata11: SATA link down (SStatus 0 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.700232] ata8: SATA link down (SStatus 0 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.700301] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.700370] ata13: SATA link down (SStatus 0 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.700442] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 29 08:01:09 blixen kernel: [    1.700563] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
Aug 29 08:01:09 blixen kernel: [    1.700764] ata14.00: configured for UDMA/66
Aug 29 08:01:09 blixen kernel: [    1.701053] ata7.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.701130] ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Aug 29 08:01:09 blixen kernel: [    1.701893] ata7.00: configured for UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.764085] usb 1-1: new high-speed USB device number 2 using ehci_hcd
Aug 29 08:01:09 blixen kernel: [    1.896376] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
Aug 29 08:01:09 blixen kernel: [    1.896452] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 29 08:01:09 blixen kernel: [    1.896766] hub 1-1:1.0: USB hub found
Aug 29 08:01:09 blixen kernel: [    1.896985] hub 1-1:1.0: 6 ports detected
Aug 29 08:01:09 blixen kernel: [    1.909506] ata2.00: ATA-8: ST3000DM001-1CH166, CC43, max UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.909582] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 29 08:01:09 blixen kernel: [    1.910340] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Aug 29 08:01:09 blixen kernel: [    1.910532] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88021648bf38), AE_NOT_FOUND (20110623/psparse-536)
Aug 29 08:01:09 blixen kernel: [    1.911122] ata2.00: configured for UDMA/133
Aug 29 08:01:09 blixen kernel: [    1.911330] scsi 1:0:0:0: Direct-Access     ATA      ST3000DM001-1CH1 CC43 PQ: 0 ANSI: 5
Aug 29 08:01:09 blixen kernel: [    1.911537] scsi 2:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5
Aug 29 08:01:09 blixen kernel: [    1.911733] scsi 3:0:0:0: Direct-Access     ATA      M4-CT064M4SSD2   040H PQ: 0 ANSI: 5
Aug 29 08:01:09 blixen kernel: [    1.911978] scsi 4:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5
Aug 29 08:01:09 blixen kernel: [    1.912220] scsi 5:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5
Aug 29 08:01:09 blixen kernel: [    1.912511] scsi 6:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5
Aug 29 08:01:09 blixen kernel: [    1.912798] scsi 13:0:0:0: Processor         Marvell  Console          1.01 PQ: 0 ANSI: 5
Aug 29 08:01:09 blixen kernel: [    1.913139] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Aug 29 08:01:09 blixen kernel: [    1.913200] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Aug 29 08:01:09 blixen kernel: [    1.913202] sd 1:0:0:0: [sdb] 4096-byte physical blocks
Aug 29 08:01:09 blixen kernel: [    1.913227] sd 1:0:0:0: [sdb] Write Protect is off
Aug 29 08:01:09 blixen kernel: [    1.913229] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Aug 29 08:01:09 blixen kernel: [    1.913240] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 29 08:01:09 blixen kernel: [    1.913448] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Aug 29 08:01:09 blixen kernel: [    1.913449] sd 2:0:0:0: [sdc] 4096-byte physical blocks
Aug 29 08:01:09 blixen kernel: [    1.913473] sd 2:0:0:0: [sdc] Write Protect is off
Aug 29 08:01:09 blixen kernel: [    1.913474] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Aug 29 08:01:09 blixen kernel: [    1.913485] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 29 08:01:09 blixen kernel: [    1.913648] sd 3:0:0:0: [sdd] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
Aug 29 08:01:09 blixen kernel: [    1.913675] sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Aug 29 08:01:09 blixen kernel: [    1.913676] sd 4:0:0:0: [sde] 4096-byte physical blocks
Aug 29 08:01:09 blixen kernel: [    1.913703] sd 4:0:0:0: [sde] Write Protect is off
Aug 29 08:01:09 blixen kernel: [    1.913704] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
Aug 29 08:01:09 blixen kernel: [    1.913708] sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Aug 29 08:01:09 blixen kernel: [    1.913709] sd 5:0:0:0: [sdf] 4096-byte physical blocks
Aug 29 08:01:09 blixen kernel: [    1.913728] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 29 08:01:09 blixen kernel: [    1.913734] sd 5:0:0:0: [sdf] Write Protect is off
Aug 29 08:01:09 blixen kernel: [    1.913735] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
Aug 29 08:01:09 blixen kernel: [    1.913747] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 29 08:01:09 blixen kernel: [    1.913758] sd 3:0:0:0: [sdd] Write Protect is off
Aug 29 08:01:09 blixen kernel: [    1.913759] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Aug 29 08:01:09 blixen kernel: [    1.913774] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 29 08:01:09 blixen kernel: [    1.914033] sd 6:0:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Aug 29 08:01:09 blixen kernel: [    1.914035] sd 6:0:0:0: [sdg] 4096-byte physical blocks
Aug 29 08:01:09 blixen kernel: [    1.914066] sd 6:0:0:0: [sdg] Write Protect is off
Aug 29 08:01:09 blixen kernel: [    1.914068] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
Aug 29 08:01:09 blixen kernel: [    1.914078] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 29 08:01:09 blixen kernel: [    1.914660] sd 0:0:0:0: [sda] 4096-byte physical blocks
Aug 29 08:01:09 blixen kernel: [    1.914825] sd 0:0:0:0: [sda] Write Protect is off
Aug 29 08:01:09 blixen kernel: [    1.914881] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 29 08:01:09 blixen kernel: [    1.914898] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 29 08:01:09 blixen kernel: [    1.915004]  sdd: sdd1 sdd2 < sdd5 sdd6 >
Aug 29 08:01:09 blixen kernel: [    1.915320] sd 3:0:0:0: [sdd] Attached SCSI disk
Aug 29 08:01:09 blixen kernel: [    1.924385]  sdc: unknown partition table
Aug 29 08:01:09 blixen kernel: [    1.924566]  sda: unknown partition table
Aug 29 08:01:09 blixen kernel: [    1.924593]  sdg: unknown partition table
Aug 29 08:01:09 blixen kernel: [    1.924680] sd 2:0:0:0: [sdc] Attached SCSI disk
Aug 29 08:01:09 blixen kernel: [    1.924888]  sde: unknown partition table
Aug 29 08:01:09 blixen kernel: [    1.924909] sd 6:0:0:0: [sdg] Attached SCSI disk
Aug 29 08:01:09 blixen kernel: [    1.925051] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 29 08:01:09 blixen kernel: [    1.925203] sd 4:0:0:0: [sde] Attached SCSI disk
Aug 29 08:01:09 blixen kernel: [    1.926381]  sdb: unknown partition table
Aug 29 08:01:09 blixen kernel: [    1.926706] sd 1:0:0:0: [sdb] Attached SCSI disk
Aug 29 08:01:09 blixen kernel: [    1.937005] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 29 08:01:09 blixen kernel: [    1.937138] sd 1:0:0:0: Attached scsi generic sg1 type 0
Aug 29 08:01:09 blixen kernel: [    1.937281] sd 2:0:0:0: Attached scsi generic sg2 type 0
Aug 29 08:01:09 blixen kernel: [    1.937408] sd 3:0:0:0: Attached scsi generic sg3 type 0
Aug 29 08:01:09 blixen kernel: [    1.937529] sd 4:0:0:0: Attached scsi generic sg4 type 0
Aug 29 08:01:09 blixen kernel: [    1.937648] sd 5:0:0:0: Attached scsi generic sg5 type 0
Aug 29 08:01:09 blixen kernel: [    1.937749] sd 6:0:0:0: Attached scsi generic sg6 type 0
Aug 29 08:01:09 blixen kernel: [    1.937845] scsi 13:0:0:0: Attached scsi generic sg7 type 3
Aug 29 08:01:09 blixen kernel: [    2.007891] usb 4-1: new high-speed USB device number 2 using ehci_hcd
Aug 29 08:01:09 blixen kernel: [    2.043846] Refined TSC clocksource calibration: 3311.144 MHz.
Aug 29 08:01:09 blixen kernel: [    2.043922] Switching to clocksource tsc
Aug 29 08:01:09 blixen kernel: [    2.140186] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
Aug 29 08:01:09 blixen kernel: [    2.140262] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 29 08:01:09 blixen kernel: [    2.140568] hub 4-1:1.0: USB hub found
Aug 29 08:01:09 blixen kernel: [    2.140779] hub 4-1:1.0: 8 ports detected
Aug 29 08:01:09 blixen kernel: [    2.411697] usb 4-1.1: new high-speed USB device number 3 using ehci_hcd
Aug 29 08:01:09 blixen kernel: [    2.506537] usb 4-1.1: New USB device found, idVendor=058f, idProduct=6362
Aug 29 08:01:09 blixen kernel: [    2.506613] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 29 08:01:09 blixen kernel: [    2.506681] usb 4-1.1: Product: Mass Storage Device
Aug 29 08:01:09 blixen kernel: [    2.506735] usb 4-1.1: Manufacturer: Generic
Aug 29 08:01:09 blixen kernel: [    2.506787] usb 4-1.1: SerialNumber: 058F312D81B
Aug 29 08:01:09 blixen kernel: [    2.507415] scsi15 : usb-storage 4-1.1:1.0
Aug 29 08:01:09 blixen kernel: [    2.579556] usb 4-1.3: new high-speed USB device number 4 using ehci_hcd
Aug 29 08:01:09 blixen kernel: [    2.636295]  sdf: unknown partition table
Aug 29 08:01:09 blixen kernel: [    2.636798] sd 5:0:0:0: [sdf] Attached SCSI disk
Aug 29 08:01:09 blixen kernel: [    2.675711] usb 4-1.3: New USB device found, idVendor=0424, idProduct=2504
Aug 29 08:01:09 blixen kernel: [    2.675789] usb 4-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 29 08:01:09 blixen kernel: [    2.676074] hub 4-1.3:1.0: USB hub found
Aug 29 08:01:09 blixen kernel: [    2.676178] hub 4-1.3:1.0: 4 ports detected
Aug 29 08:01:09 blixen kernel: [    2.747416] usb 4-1.4: new full-speed USB device number 5 using ehci_hcd
Aug 29 08:01:09 blixen kernel: [    2.843724] usb 4-1.4: New USB device found, idVendor=046d, idProduct=c318
Aug 29 08:01:09 blixen kernel: [    2.843800] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 29 08:01:09 blixen kernel: [    2.843868] usb 4-1.4: Product: Logitech Illuminated Keyboard
Aug 29 08:01:09 blixen kernel: [    2.843923] usb 4-1.4: Manufacturer: Logitech
Aug 29 08:01:09 blixen kernel: [    2.847972] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input0
Aug 29 08:01:09 blixen kernel: [    2.848122] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-1.4/input0
Aug 29 08:01:09 blixen kernel: [    2.849883] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.1/input/input1
Aug 29 08:01:09 blixen kernel: [    2.850079] generic-usb 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-1.4/input1
Aug 29 08:01:09 blixen kernel: [    2.850175] usbcore: registered new interface driver usbhid
Aug 29 08:01:09 blixen kernel: [    2.850230] usbhid: USB HID core driver
Aug 29 08:01:09 blixen kernel: [    2.852660] scsi: waiting for bus probes to complete ...
Aug 29 08:01:09 blixen kernel: [    2.915280] usb 4-1.5: new full-speed USB device number 6 using ehci_hcd
Aug 29 08:01:09 blixen kernel: [    3.007985] usb 4-1.5: New USB device found, idVendor=067b, idProduct=2303
Aug 29 08:01:09 blixen kernel: [    3.008061] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 29 08:01:09 blixen kernel: [    3.008129] usb 4-1.5: Product: USB-Serial Controller
Aug 29 08:01:09 blixen kernel: [    3.008184] usb 4-1.5: Manufacturer: Prolific Technology Inc.
Aug 29 08:01:09 blixen kernel: [    3.079141] usb 4-1.6: new low-speed USB device number 7 using ehci_hcd
Aug 29 08:01:09 blixen kernel: [    3.273354] usb 4-1.6: New USB device found, idVendor=051d, idProduct=0002
Aug 29 08:01:09 blixen kernel: [    3.273431] usb 4-1.6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Aug 29 08:01:09 blixen kernel: [    3.273499] usb 4-1.6: Product: Back-UPS CS 650 FW:817.v9.I USB FW:v9
Aug 29 08:01:09 blixen kernel: [    3.273555] usb 4-1.6: Manufacturer: American Power Conversion
Aug 29 08:01:09 blixen kernel: [    3.273611] usb 4-1.6: SerialNumber: 4B1325P03753  
Aug 29 08:01:09 blixen kernel: [    3.507721] scsi 15:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
Aug 29 08:01:09 blixen kernel: [    3.508473] scsi 15:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
Aug 29 08:01:09 blixen kernel: [    3.509350] scsi 15:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
Aug 29 08:01:09 blixen kernel: [    3.510101] scsi 15:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
Aug 29 08:01:09 blixen kernel: [    4.659548] scsi 14:0:0:0: Direct-Access              VirtualDisk           PQ: 0 ANSI: 2
Aug 29 08:01:09 blixen kernel: [    4.660370] sd 14:0:0:0: Attached scsi generic sg8 type 0
Aug 29 08:01:09 blixen kernel: [    4.660780] sd 15:0:0:0: Attached scsi generic sg9 type 0
Aug 29 08:01:09 blixen kernel: [    4.661061] sd 15:0:0:1: Attached scsi generic sg10 type 0
Aug 29 08:01:09 blixen kernel: [    4.661424] sd 15:0:0:2: Attached scsi generic sg11 type 0
Aug 29 08:01:09 blixen kernel: [    4.662466] sd 15:0:0:3: Attached scsi generic sg12 type 0
Aug 29 08:01:09 blixen kernel: [    4.675762] sd 15:0:0:2: [sdk] Attached SCSI removable disk
Aug 29 08:01:09 blixen kernel: [    4.681358] sd 15:0:0:1: [sdj] Attached SCSI removable disk
Aug 29 08:01:09 blixen kernel: [    4.682853] sd 15:0:0:0: [sdi] Attached SCSI removable disk
Aug 29 08:01:09 blixen kernel: [    4.683649] sd 15:0:0:3: [sdl] Attached SCSI removable disk
Aug 29 08:01:09 blixen kernel: [    4.792970] generic-usb 0003:051D:0002.0003: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v9.I USB FW:v9] on usb-0000:00:1d.0-1.6/input0
Aug 29 08:01:09 blixen kernel: [    4.877631] usb 4-1.3.4: new low-speed USB device number 8 using ehci_hcd
Aug 29 08:01:09 blixen kernel: [    4.974430] usb 4-1.3.4: New USB device found, idVendor=1050, idProduct=0010
Aug 29 08:01:09 blixen kernel: [    4.974507] usb 4-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 29 08:01:09 blixen kernel: [    4.974575] usb 4-1.3.4: Product: Yubico Yubikey II
Aug 29 08:01:09 blixen kernel: [    4.974629] usb 4-1.3.4: Manufacturer: Yubico
Aug 29 08:01:09 blixen kernel: [    4.977467] input: Yubico Yubico Yubikey II as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3.4/4-1.3.4:1.0/input/input2
Aug 29 08:01:09 blixen kernel: [    4.977636] generic-usb 0003:1050:0010.0004: input,hidraw3: USB HID v1.11 Keyboard [Yubico Yubico Yubikey II] on usb-0000:00:1d.0-1.3.4/input0
Aug 29 08:01:09 blixen kernel: [   35.028156] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd
Aug 29 08:01:09 blixen kernel: [   35.049051] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802165db0c0
Aug 29 08:01:09 blixen kernel: [   35.049142] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802165db100
Aug 29 08:01:09 blixen kernel: [   69.047673] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd
Aug 29 08:01:09 blixen kernel: [   69.068600] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802165db0c0
Aug 29 08:01:09 blixen kernel: [   69.068686] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802165db100
Aug 29 08:01:09 blixen kernel: [  103.067220] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd
Aug 29 08:01:09 blixen kernel: [  103.088116] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802165db0c0
Aug 29 08:01:09 blixen kernel: [  103.088206] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802165db100
Aug 29 08:01:09 blixen kernel: [  136.958848] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd
Aug 29 08:01:09 blixen kernel: [  136.979768] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802165db0c0
Aug 29 08:01:09 blixen kernel: [  136.979853] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802165db100
Aug 29 08:01:09 blixen kernel: [  137.881324] usb 4-1.6: USB disconnect, device number 7
Aug 29 08:01:09 blixen kernel: [  138.648690] usb 4-1.5: USB disconnect, device number 6
Aug 29 08:01:09 blixen kernel: [  143.713265] usb 3-2: USB disconnect, device number 2
Aug 29 08:01:09 blixen kernel: [  170.862825] sd 14:0:0:0: Device offlined - not ready after error recovery
Aug 29 08:01:09 blixen kernel: [  170.866722] sd 14:0:0:0: [sdh] READ CAPACITY failed
Aug 29 08:01:09 blixen kernel: [  170.866778] sd 14:0:0:0: [sdh]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Aug 29 08:01:09 blixen kernel: [  170.866883] sd 14:0:0:0: [sdh] Sense not available.
Aug 29 08:01:09 blixen kernel: [  170.866978] sd 14:0:0:0: [sdh] Write Protect is off
Aug 29 08:01:09 blixen kernel: [  170.867034] sd 14:0:0:0: [sdh] Mode Sense: 00 00 00 00
Aug 29 08:01:09 blixen kernel: [  170.867076] sd 14:0:0:0: [sdh] Asking for cache data failed
Aug 29 08:01:09 blixen kernel: [  170.867133] sd 14:0:0:0: [sdh] Assuming drive cache: write through
Aug 29 08:01:09 blixen kernel: [  170.867428] sd 14:0:0:0: [sdh] READ CAPACITY failed
Aug 29 08:01:09 blixen kernel: [  170.867484] sd 14:0:0:0: [sdh]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Aug 29 08:01:09 blixen kernel: [  170.867589] sd 14:0:0:0: [sdh] Sense not available.
Aug 29 08:01:09 blixen kernel: [  170.867718] sd 14:0:0:0: [sdh] Asking for cache data failed
Aug 29 08:01:09 blixen kernel: [  170.867774] sd 14:0:0:0: [sdh] Assuming drive cache: write through
Aug 29 08:01:09 blixen kernel: [  170.867830] sd 14:0:0:0: [sdh] Attached SCSI disk
Aug 29 08:01:09 blixen kernel: [  170.992054] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
Aug 29 08:01:09 blixen kernel: [  170.993554] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
Aug 29 08:01:09 blixen kernel: [  170.994104] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
Aug 29 08:01:09 blixen kernel: [  170.994184] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
Aug 29 08:01:09 blixen kernel: [  170.995573] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
Aug 29 08:01:09 blixen kernel: [  170.995901] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
Aug 29 08:01:09 blixen kernel: [  170.995981] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x25
Aug 29 08:01:09 blixen kernel: [  170.997361] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
Aug 29 08:01:09 blixen kernel: [  170.997690] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
Aug 29 08:01:09 blixen kernel: [  170.997753] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25
Aug 29 08:01:09 blixen kernel: [  170.999101] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
Aug 29 08:01:09 blixen kernel: [  170.999427] microcode: CPU3 updated to revision 0x29, date = 2013-06-12
Aug 29 08:01:09 blixen kernel: [  170.999516] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Aug 29 08:01:09 blixen kernel: [  171.017027] md: md0 stopped.
Aug 29 08:01:09 blixen kernel: [  171.017372] md: bind<sdf>
Aug 29 08:01:09 blixen kernel: [  171.018219] md: raid1 personality registered for level 1
Aug 29 08:01:09 blixen kernel: [  171.018352] bio: create slab <bio-1> at 1
Aug 29 08:01:09 blixen kernel: [  171.018454] md/raid1:md0: active with 1 out of 2 mirrors
Aug 29 08:01:09 blixen kernel: [  171.018520] md0: detected capacity change from 0 to 3000591794176
Aug 29 08:01:09 blixen kernel: [  171.019192]  md0: unknown partition table
Aug 29 08:01:09 blixen kernel: [  171.125858] ADDRCONF(NETDEV_UP): eth1: link is not ready
Aug 29 08:01:09 blixen kernel: [  171.705428] md: md1 stopped.
Aug 29 08:01:09 blixen kernel: [  171.706083] md: bind<sda>
Aug 29 08:01:09 blixen kernel: [  171.706227] md: bind<sdc>
Aug 29 08:01:09 blixen kernel: [  171.706404] md: bind<sdb>
Aug 29 08:01:09 blixen kernel: [  171.706970] md: bind<sdg>
Aug 29 08:01:09 blixen kernel: [  171.707924] md: raid10 personality registered for level 10
Aug 29 08:01:09 blixen kernel: [  171.708288] md/raid10:md1: active with 4 out of 4 devices
Aug 29 08:01:09 blixen kernel: [  171.708357] md1: detected capacity change from 0 to 6000916561920
Aug 29 08:01:09 blixen kernel: [  171.721745]  md1: unknown partition table
Aug 29 08:01:09 blixen kernel: [  171.888005] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
Aug 29 08:01:09 blixen kernel: [  172.107451] ACPI: Requesting acpi_cpufreq
Aug 29 08:01:09 blixen kernel: [  172.107913] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
Aug 29 08:01:09 blixen kernel: [  172.107987] ACPI: Power Button [PWRB]
Aug 29 08:01:09 blixen kernel: [  172.114224] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Aug 29 08:01:09 blixen kernel: [  172.114298] ACPI: Power Button [PWRF]
Aug 29 08:01:09 blixen kernel: [  172.114538] wmi: Mapper loaded
Aug 29 08:01:09 blixen kernel: [  172.127987] iTCO_vendor_support: vendor-support=0
Aug 29 08:01:09 blixen kernel: [  172.128620] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
Aug 29 08:01:09 blixen kernel: [  172.128713] ACPI: resource 0000:00:1f.3 [io  0xf040-0xf05f] conflicts with ACPI region SMBI [io 0xf040-0xf04f]
Aug 29 08:01:09 blixen kernel: [  172.128759] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
Aug 29 08:01:09 blixen kernel: [  172.128873] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Aug 29 08:01:09 blixen kernel: [  172.129095] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Aug 29 08:01:09 blixen kernel: [  172.131435] [drm] Initialized drm 1.1.0 20060810
Aug 29 08:01:09 blixen kernel: [  172.134600] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [  172.134625] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [  172.137082] IR NEC protocol handler initialized
Aug 29 08:01:09 blixen kernel: [  172.140434] DVB: registering new adapter (Mantis DVB adapter)
Aug 29 08:01:09 blixen kernel: [  172.143462] input: PC Speaker as /devices/platform/pcspkr/input/input5
Aug 29 08:01:09 blixen kernel: [  172.144560] Error: Driver 'pcspkr' is already registered, aborting...
Aug 29 08:01:09 blixen kernel: [  172.147677] IR RC5(x) protocol handler initialized
Aug 29 08:01:09 blixen kernel: [  172.151467] IR RC6 protocol handler initialized
Aug 29 08:01:09 blixen kernel: [  172.153664] IR JVC protocol handler initialized
Aug 29 08:01:09 blixen kernel: [  172.155925] IR Sony protocol handler initialized
Aug 29 08:01:09 blixen kernel: [  172.159203] IR MCE Keyboard/mouse protocol handler initialized
Aug 29 08:01:09 blixen kernel: [  172.163558] lirc_dev: IR Remote Control driver registered, major 251 
Aug 29 08:01:09 blixen kernel: [  172.165053] IR LIRC bridge handler initialized
Aug 29 08:01:09 blixen kernel: [  172.169750] asus_wmi: ASUS WMI generic driver loaded
Aug 29 08:01:09 blixen kernel: [  172.170588] asus_wmi: Initialization: 0x0
Aug 29 08:01:09 blixen kernel: [  172.170701] asus_wmi: BIOS WMI version: 0.9
Aug 29 08:01:09 blixen kernel: [  172.170838] asus_wmi: SFUN value: 0x0
Aug 29 08:01:09 blixen kernel: [  172.171310] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
Aug 29 08:01:09 blixen kernel: [  172.172648] asus_wmi: Backlight controlled by ACPI video driver
Aug 29 08:01:09 blixen kernel: [  172.700307] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
Aug 29 08:01:09 blixen kernel: [  172.700539] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Aug 29 08:01:09 blixen kernel: [  172.700896] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Aug 29 08:01:09 blixen kernel: [  172.701622] i915 0000:00:02.0: setting latency timer to 64
Aug 29 08:01:09 blixen kernel: [  172.751374] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
Aug 29 08:01:09 blixen kernel: [  172.751444] [drm] MTRR allocation failed.  Graphics performance may suffer.
Aug 29 08:01:09 blixen kernel: [  172.751622] i915 0000:00:02.0: irq 53 for MSI/MSI-X
Aug 29 08:01:09 blixen kernel: [  172.751634] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Aug 29 08:01:09 blixen kernel: [  172.751690] [drm] Driver supports precise vblank timestamp query.
Aug 29 08:01:09 blixen kernel: [  172.751770] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Aug 29 08:01:09 blixen kernel: [  172.795090] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Aug 29 08:01:09 blixen kernel: [  173.023303] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
Aug 29 08:01:09 blixen kernel: [  173.024683] DVB: registering new adapter (Mantis DVB adapter)
Aug 29 08:01:09 blixen kernel: [  173.042333] fbcon: inteldrmfb (fb0) is primary device
Aug 29 08:01:09 blixen kernel: [  173.219726] Console: switching to colour frame buffer device 210x65
Aug 29 08:01:09 blixen kernel: [  173.227758] fb0: inteldrmfb frame buffer device
Aug 29 08:01:09 blixen kernel: [  173.227794] drm: registered panic notifier
Aug 29 08:01:09 blixen kernel: [  173.261060] acpi device:43: registered as cooling_device9

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 3604
board_vendor: ASUSTeK COMPUTER INC.
board_name: P8H67-M PRO
board_version: Rev X.0x

** Loaded modules:
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
xt_tcpudp
xt_state
nf_conntrack_ftp
iptable_mangle
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
iptable_filter
ip_tables
x_tables
parport_pc
ppdev
lp
parport
tun
sit
tunnel4
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
autofs4
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
xfs
sha256_generic
ses
usbtouchscreen
dm_crypt
dm_mod
loop
tda10023
tda10021
snd_hda_codec_hdmi
snd_hda_codec_realtek
ir_lirc_codec
lirc_dev
eeepc_wmi
asus_wmi
ir_mce_kbd_decoder
sparse_keymap
rfkill
ir_sony_decoder
ir_jvc_decoder
pl2303
usbserial
i2c_i801
coretemp
pcspkr
psmouse
serio_raw
ir_rc6_decoder
mantis
i915
ir_rc5_decoder
mantis_core
ir_nec_decoder
dvb_core
snd_hda_intel
snd_hda_codec
rc_core
drm_kms_helper
evdev
joydev
iTCO_wdt
iTCO_vendor_support
drm
snd_hwdep
i2c_algo_bit
snd_pcm
i2c_core
snd_page_alloc
snd_timer
snd
acpi_cpufreq
mperf
soundcore
video
wmi
processor
button
ext4
crc16
jbd2
mbcache
raid10
raid1
md_mod
microcode
enclosure
usbhid
hid
sg
sd_mod
usb_storage
crc_t10dif
crc32c_intel
ghash_clmulni_intel
fan
thermal
thermal_sys
aesni_intel
r8169
mii
ehci_hcd
aes_x86_64
ahci
libahci
usbcore
usb_common
aes_generic
cryptd
libata
scsi_mod
e1000e

** Network interface configuration:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
	address 192.168.2.1
	netmask 255.255.255.0

auto eth1
iface eth1 inet static
	address 192.168.1.1
	netmask 255.255.255.0
	gateway 192.168.1.254
	up sh -c '/etc/init.d/aiccu start; ip addr add 2001:16d8:dda8::3/64 dev eth1'
	down sh -c '/etc/init.d/aiccu stop; ip addr del 2001:16d8:dda8::3/64 dev eth1'


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 14:da:e9:ed:d6:04 brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.1/24 brd 192.168.2.255 scope global eth0
    inet6 fe80::16da:e9ff:feed:d604/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 68:05:ca:0d:52:c8 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global eth1
    inet6 2001:16d8:dda8::3/64 scope global 
       valid_lft forever preferred_lft forever
    inet6 fe80::6a05:caff:fe0d:52c8/64 scope link 
       valid_lft forever preferred_lft forever
4: sit0: <NOARP> mtu 1480 qdisc noop state DOWN 
    link/sit 0.0.0.0 brd 0.0.0.0
5: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
    link/none 
    inet 10.11.0.10 peer 10.11.0.9/32 scope global tun0
6: sixxs: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1280 qdisc noqueue state UNKNOWN 
    link/sit 192.168.1.1 peer 93.158.77.42
    inet6 2001:16d8:dd00:155::2/64 scope global 
       valid_lft forever preferred_lft forever
    inet6 fe80::a0b:a/64 scope link 
       valid_lft forever preferred_lft forever
    inet6 fe80::c0a8:101/64 scope link 
       valid_lft forever preferred_lft forever
    inet6 fe80::c0a8:201/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo: 61478677  583976    0    0    0     0          0         0 61478677  583976    0    0    0     0       0          0
 sixxs: 2914442029 2472577    0    0    0     0          0         0 126899134 1261127    5    0    0     0       0          0
  eth1: 6267273068 14144020    0   44    0     0          0     59608 28326813739 23970209    0    0    0     0       0          0
  sit0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth0:  412240    5705    0    0    0     0          0         0  1052920    4756    0    0    0     0       0          0
  tun0: 6961952   11123    0    0    0     0          0         0  1527762   11408    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    12036593 total packets received
    0 forwarded
    0 incoming packets discarded
    12027919 incoming packets delivered
    8053581 requests sent out
    25 outgoing packets dropped
    88 reassemblies required
    44 packets reassembled ok
Icmp:
    7998 ICMP messages received
    702 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 5828
        echo requests: 437
        echo replies: 1733
    9609 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 4673
        echo request: 4499
        echo replies: 437
IcmpMsg:
        InType0: 1733
        InType3: 5828
        InType8: 437
        OutType0: 437
        OutType3: 4673
        OutType8: 4499
Tcp:
    22922 active connections openings
    9074 passive connection openings
    905 failed connection attempts
    450 connection resets received
    6 connections established
    10074922 segments received
    20734766 segments send out
    1909 segments retransmited
    0 bad segments received.
    4671 resets sent
Udp:
    89951 packets received
    66 packets to unknown port received.
    0 packet receive errors
    91500 packets sent
UdpLite:
TcpExt:
    38 invalid SYN cookies received
    65 resets received for embryonic SYN_RECV sockets
    15621 TCP sockets finished time wait in fast timer
    3314 delayed acks sent
    62 delayed acks further delayed because of locked socket
    Quick ack mode was activated 197 times
    178927 packets directly queued to recvmsg prequeue.
    1960651 bytes directly in process context from backlog
    374163102 bytes directly received in process context from prequeue
    4286068 packet headers predicted
    265864 packets header predicted and directly queued to user
    532578 acknowledgments not containing data payload received
    5409006 predicted acknowledgments
    7 times recovered from packet loss by selective acknowledgements
    2 congestion windows recovered without slow start after partial ack
    1 timeouts after SACK recovery
    14 fast retransmits
    2 forward retransmits
    2 retransmits in slow start
    462 other TCP timeouts
    1 SACK retransmits failed
    197 DSACKs sent for old packets
    1 DSACKs received
    1681 connections reset due to unexpected data
    401 connections reset due to early user close
    15 connections aborted due to timeout
    TCPSackShifted: 32
    TCPSackMerged: 19
    TCPSackShiftFallback: 55
    TCPDeferAcceptDrop: 2739
    IPReversePathFilter: 19
    TCPChallengeACK: 1
IpExt:
    InMcastPkts: 1722
    OutMcastPkts: 96
    InBcastPkts: 11741
    OutBcastPkts: 9720
    InOctets: 1565305890
    OutOctets: 838523584
    InMcastOctets: 237206
    OutMcastOctets: 41958
    InBcastOctets: 2217963
    OutBcastOctets: 2019489


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
	Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f7e00000-f7efffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0112] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 53
	Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f7f0b000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7f08000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
	Subsystem: ASUSTeK Computer Inc. Device [1043:841b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 52
	Region 0: Memory at f7f00000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f7d00000-f7dfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f7c00000-f7cfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.7 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b5) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
	Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7f07000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset Family LPC Controller [8086:1c4a] (rev 05)
	Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 44
	Region 0: I/O ports at f0b0 [size=8]
	Region 1: I/O ports at f0a0 [size=4]
	Region 2: I/O ports at f090 [size=8]
	Region 3: I/O ports at f080 [size=4]
	Region 4: I/O ports at f060 [size=32]
	Region 5: Memory at f7f06000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
	Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:844d]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f7f05000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]

01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] (rev 10) (prog-if 01 [AHCI 1.0])
	Subsystem: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 51
	Region 0: I/O ports at e050 [size=8]
	Region 1: I/O ports at e040 [size=4]
	Region 2: I/O ports at e030 [size=8]
	Region 3: I/O ports at e020 [size=4]
	Region 4: I/O ports at e000 [size=32]
	Region 5: Memory at f7e10000 (32-bit, non-prefetchable) [size=2K]
	Expansion ROM at f7e00000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
	Subsystem: Intel Corporation Gigabit CT Desktop Adapter [8086:a01f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7dc0000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f7d00000 (32-bit, non-prefetchable) [size=512K]
	Region 2: I/O ports at d000 [size=32]
	Region 3: Memory at f7de0000 (32-bit, non-prefetchable) [size=16K]
	Expansion ROM at f7d80000 [disabled] [size=256K]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
	Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 45
	Region 0: I/O ports at c000 [size=256]
	Region 2: Memory at f0104000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at f0100000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

05:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 01) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
	Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

06:00.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
	Subsystem: Device [1ae4:0002]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at f0001000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: Mantis

06:01.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
	Subsystem: Device [1ae4:0002]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: Mantis


** USB devices:
Bus 004 Device 011: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 004 Device 012: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 004 Device 010: ID 1058:1140 Western Digital Technologies, Inc. 


-- System Information:
Debian Release: 7.6
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109.1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                2:4.05+dfsg-6+deb7u1
ii  grub-pc                 1.99-27+deb7u2
ii  linux-doc-3.2           3.2.60-1+deb7u3

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
ii  firmware-bnx2           0.36+wheezy.1
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.36+wheezy.1
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
ii  firmware-realtek        0.36+wheezy.1
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: