[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#557802: marked as done (linux-image-2.6.26-2-686: No sound with snd-ens1371.ko)



Your message dated Sun, 30 Sep 2012 12:35:25 -0700
with message-id <20120930193525.GB30235@elie.Belkin>
and subject line Re: [etch->lenny regression] No sound with snd-ens1371.ko
has caused the Debian Bug report #557802,
regarding linux-image-2.6.26-2-686: No sound with snd-ens1371.ko
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
557802: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=557802
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-2-686
Version: 2.6.26-19lenny2
Severity: normal

Two days ago I installed Debian on a 10-year-old laptop. It's a
IPC Topnote G. Soundcard is a Creative Labs Ectiva EV1938. The laptop
was running a few days ago with Debian Etch and OSS-modules and the
output of oss-modul es1371 was quite good. I formated the harddisk to
set up Lenny.
If I play a music file now, it looks like the file is played without any
errors. There are no messages that the hardware or alsa is corrupt. But
the speakers are silent. The tool alsamixer shows that nothing is muted
and all values are at maximum level.
The tools `speaker-test` shows normal behaviour/output, but also with
silent speakers.

I checked alsa-mailinglist and found a mistake which is very similar:
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg22930.html

-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-19lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Nov 4 20:45:37 UTC 2009

** Command line:
root=/dev/hda1 ro quiet

** Not tainted

** Kernel log:
[    5.112545] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.112556] usb usb1: Product: UHCI Host Controller
[    5.112564] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    5.112572] usb usb1: SerialNumber: 0000:00:07.2
[    5.321132] Uniform Multi-Platform E-IDE driver
[    5.321152] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    5.395802] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at  PCI slot 0000:00:07.1
[    5.395845] PIIX4: not 100% native mode: will probe irqs later
[    5.395870]     ide0: BM-DMA at 0xfcf0-0xfcf7
[    5.395895]     ide1: BM-DMA at 0xfcf8-0xfcff
[    5.395912] Probing IDE interface ide0...
[    5.539824] Floppy drive(s): fd0 is 1.44M
[    5.645358] FDC 0 is a National Semiconductor PC87306
[    5.720271] hda: SAMSUNG MP0402H, ATA DISK drive
[    5.808986] Marking TSC unstable due to: TSC halts in idle.
[    6.392222] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    6.392308] hda: UDMA/33 mode selected
[    6.392387] Probing IDE interface ide1...
[    7.128196] hdc: MATSHITA CR-176, ATAPI CD/DVD-ROM drive
[    7.464171] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    7.464338] hdc: UDMA/33 mode selected
[    7.464502] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    7.474517] ide1 at 0x170-0x177,0x376 on irq 15
[    7.578801] hda: max request size: 512KiB
[    7.586442] hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63
[    7.586932] hda: cache flushes supported
[    7.587103]  hda: hda1 hda2 hda3
[    7.613638] hdc: ATAPI 24X CD-ROM drive, 128kB Cache
[    7.613658] Uniform CD-ROM driver Revision: 3.20
[    7.974106] PM: Starting manual resume from disk
[    8.055963] kjournald starting.  Commit interval 5 seconds
[    8.055963] EXT3-fs: mounted filesystem with ordered data mode.
[    9.980834] udevd version 125 started
[   13.977283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.006849] Linux agpgart interface v0.103
[   14.131699] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.149325] agpgart: Detected an Intel 440BX Chipset.
[   14.155596] agpgart: AGP aperture is 64M @ 0x18000000
[   14.801360] Yenta: CardBus bridge found at 0000:00:0a.0 [0000:0000]
[   14.801397] Yenta O2: res at 0x94/0xD4: 88/00
[   14.801405] Yenta O2: old bridge, disabling read prefetch/write burst
[   14.847404] input: PC Speaker as /class/input/input1
[   14.928848] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[   14.928861] Socket status: 30000821
[   14.929575] Yenta: CardBus bridge found at 0000:00:0a.1 [0000:0000]
[   15.056864] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[   15.056877] Socket status: 30000007
[   15.057697] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[   15.312476] Error: Driver 'pcspkr' is already registered, aborting...
[   15.475957] ENS1371 0000:00:04.0: enabling device (0000 -> 0001)
[   15.476679] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[   15.476692] PCI: setting IRQ 5 as level-triggered
[   15.476701] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[   15.640075] pccard: CardBus card inserted into slot 0
[   16.158766] Synaptics Touchpad, model: 1, fw: 4.1, id: 0x14aa1, caps: 0x0/0x0
[   16.195288] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[   16.859712] input: Power Button (FF) as /class/input/input3
[   16.887956] ACPI: Power Button (FF) [PWRF]
[   16.888269] input: Power Button (CM) as /class/input/input4
[   17.030226] ACPI: Power Button (CM) [PWRB]
[   17.430464] ACPI: AC Adapter [ACAD] (on-line)
[   17.657173] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   17.745311] Error: Driver 'pcspkr' is already registered, aborting...
[   18.243075] ACPI: Battery Slot [BAT1] (battery present)
[   19.474561] NET: Registered protocol family 23
[   19.597683] parport_pc 00:06: activated
[   19.597699] parport_pc 00:06: reported by Plug and Play ACPI
[   19.597760] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   19.730285] nsc-ircc 00:08: can't evaluate _CRS: 12321
[   19.730350] nsc-ircc 00:08: activation failed
[   19.730410] nsc-ircc: probe of 00:08 failed with error -5
[   19.730509] nsc-ircc, Found chip at base=0x398
[   19.730521] nsc-ircc, Wrong chip version ff
[   20.098167] cs: IO port probe 0x100-0x3af: clean.
[   20.100274] cs: IO port probe 0x3e0-0x4ff: clean.
[   20.101167] cs: IO port probe 0x820-0x8ff: clean.
[   20.102221] cs: IO port probe 0x100-0x3af: clean.
[   20.104296] cs: IO port probe 0x3e0-0x4ff: clean.
[   20.105185] cs: IO port probe 0x820-0x8ff: clean.
[   20.137376] cs: IO port probe 0xc00-0xcf7: clean.
[   20.138460] cs: IO port probe 0xa00-0xaff: clean.
[   20.174429] cs: IO port probe 0xc00-0xcf7: clean.
[   20.175561] cs: IO port probe 0xa00-0xaff: clean.
[   21.281227] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[   21.281330] tulip 0000:02:00.0: enabling device (0000 -> 0003)
[   21.281353] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   21.281408] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   21.282246] tulip0:  MII transceiver #1 config 3100 status 7869 advertising 05e1.
[   21.291688] eth0: ADMtek Comet rev 17 at Port 0x1400, 00:e0:98:b8:bd:0f, IRQ 11.
[   23.221305] Adding 257032k swap on /dev/hda2.  Priority:-1 extents:1 across:257032k
[   23.688541] EXT3 FS on hda1, internal journal
[   24.190114] loop: module loaded
[   25.078730] kjournald starting.  Commit interval 5 seconds
[   25.080320] EXT3 FS on hda3, internal journal
[   25.080338] EXT3-fs: mounted filesystem with ordered data mode.
[   28.451558] NET: Registered protocol family 10
[   28.453366] lo: Disabled Privacy Extensions
[   28.874120] 0000:02:00.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
[   28.874163] eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
[   38.896043] eth0: no IPv6 routers present

** Loaded modules:
Module                  Size  Used by
ipv6                  235396  10 
loop                   12748  0 
joydev                  8480  0 
tulip                  44096  0 
parport_pc             22500  0 
irda                   95512  0 
pcmcia                 29548  0 
firmware_class          6816  1 pcmcia
parport                30988  1 parport_pc
crc_ccitt               2080  1 irda
container               3456  0 
battery                10180  0 
ac                      4196  0 
button                  6096  0 
psmouse                32336  0 
snd_ens1371            19072  0 
gameport               10700  1 snd_ens1371
snd_rawmidi            18496  1 snd_ens1371
snd_seq_device          6380  1 snd_rawmidi
serio_raw               4740  0 
i2c_piix4               7216  0 
snd_pcsp                8576  0 
snd_ac97_codec         88452  1 snd_ens1371
yenta_socket           20620  3 
rsrc_nonstatic          9504  1 yenta_socket
pcmcia_core            31892  3 pcmcia,yenta_socket,rsrc_nonstatic
i2c_core               19828  1 i2c_piix4
ac97_bus                1728  1 snd_ac97_codec
snd_pcm                62660  3 snd_ens1371,snd_pcsp,snd_ac97_codec
intel_agp              22524  1 
shpchp                 25528  0 
snd_timer              17800  1 snd_pcm
agpgart                28808  1 intel_agp
pci_hotplug            23460  1 shpchp
snd                    45636  7 snd_ens1371,snd_rawmidi,snd_seq_device,snd_pcsp,snd_ac97_codec,snd_pcm,snd_timer
soundcore               6368  1 snd
snd_page_alloc          7816  1 snd_pcm
evdev                   8000  0 
ext3                  105576  2 
jbd                    39476  1 ext3
mbcache                 7108  1 ext3
ide_cd_mod             27684  0 
cdrom                  30176  1 ide_cd_mod
ide_disk               10496  4 
floppy                 47716  0 
piix                    6568  0 [permanent]
ide_pci_generic         3908  0 [permanent]
ide_core               96168  4 ide_cd_mod,ide_disk,piix,ide_pci_generic
ata_generic             4676  0 
uhci_hcd               18672  0 
libata                140448  1 ata_generic
usbcore               118192  2 uhci_hcd
scsi_mod              129548  1 libata
dock                    8304  1 libata
thermal                15228  0 
processor              32576  2 thermal
fan                     4196  0 
thermal_sys            10856  3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
	Latency: 64
	Region 0: Memory at 18000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 128
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fd000000-fedfffff
	Prefetchable memory behind bridge: 30000000-300fffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:04.0 Multimedia audio controller [0401]: Creative Labs Ectiva EV1938 [1102:8938]
	Subsystem: Creative Labs Device [1102:5938]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 96 (3000ns min, 32000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at fc40 [size=64]
	Region 1: I/O ports at fcc0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: ENS1371
	Kernel modules: snd-ens1371

00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at fcf0 [size=16]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin D routed to IRQ 9
	Region 4: I/O ports at fca0 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin ? routed to IRQ 9
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c-piix4

00:0a.0 CardBus bridge [0607]: O2 Micro, Inc. OZ6832/6833 CardBus Controller [1217:6832] (rev 34)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 30100000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 20000000-23fff000 (prefetchable)
	Memory window 1: 24000000-27fff000
	I/O window 0: 00001400-000014ff
	I/O window 1: 00001800-000018ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

00:0a.1 CardBus bridge [0607]: O2 Micro, Inc. OZ6832/6833 CardBus Controller [1217:6832] (rev 34)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 30101000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 28000000-2bfff000 (prefetchable)
	Memory window 1: 2c000000-2ffff000
	I/O window 0: 00001c00-00001cff
	I/O window 1: 00002000-000020ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility P/M AGP 2x [1002:4c4d] (rev 64) (prog-if 00 [VGA controller])
	Subsystem: Alpha-Top Corp Device [156d:b797]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 66 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at e800 [size=256]
	Region 2: Memory at fedfe000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 30000000 [disabled] [size=128K]
	Capabilities: <access denied>

02:00.0 Ethernet controller [0200]: Abocom Systems Inc 21x4x DEC-Tulip compatible 10/100 Ethernet [13d1:ab08] (rev 11)
	Subsystem: Abocom Systems Inc 21x4x DEC-Tulip compatible 10/100 Ethernet [13d1:ab08]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (63750ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 1400 [size=256]
	Region 1: Memory at 24000000 (32-bit, non-prefetchable) [size=1K]
	[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: tulip
	Kernel modules: tulip



-- System Information:
Debian Release: 5.0.3
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-2-686 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-2-686 recommends:
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-2-686 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26           <none>        (no description available)

-- debconf information:
  linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
  linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
  linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
  linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
  linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
  linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
  linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
  linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
  linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
  linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
  linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
  linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
  linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true



--- End Message ---
--- Begin Message ---
Version: 2.6.32-34

Tino Schmidt wrote:

> Two days ago I installed Debian on a 10-year-old laptop. It's a
> IPC Topnote G. Soundcard is a Creative Labs Ectiva EV1938. The laptop
> was running a few days ago with Debian Etch and OSS-modules and the
> output of oss-modul es1371 was quite good. I formated the harddisk to
> set up Lenny.
> If I play a music file now, it looks like the file is played without any
> errors. There are no messages that the hardware or alsa is corrupt. But
> the speakers are silent. The tool alsamixer shows that nothing is muted
> and all values are at maximum level.
> The tools `speaker-test` shows normal behaviour/output, but also with
> silent speakers.

Thanks for a clear and pleasant report.

Said to be fixed by v2.6.32.37~52 (ALSA: ens1371: fix Creative Ectiva
support, 2011-03-30) which was part of 2.6.32-34.  Closing
optimistically, but confirmation either way about the fix would be
very welcome.

--- End Message ---

Reply to: