--- Begin Message ---
Package: src:linux
Version: 3.2.23-1
Severity: normal
I have two servers (chipset Intel C602 PCH (Patsburg)) with Intel i350-AM2 gigabit ethernet adaptor and these NICs dont work.
I tried:
debian kernel 2.6.32 (igb module version - 3.0.6-k2)
debian kernel 3.2.0 (igb module version - 3.2.10-k)
3.5 kernel from kernel.org
igb module from intel 3.4.8 and 3.4.7
Change switches and patch cords.
Then I tried:
Ubuntu Server 12.02 - without results
CentOS 6.3 (igb 3.2.10-k, kernel 2.6.32-279.el6.x86_64) - link brings UP !
# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
# ethtool eth2
Settings for eth2:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
# ethtool -i eth0
driver: igb
version: 3.4.8
firmware-version: 1.4-8
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
# ethtool -i eth2
driver: igb
version: 3.4.8
firmware-version: 1.4-8
bus-info: 0000:08:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
modinfo igb
filename: /lib/modules/3.2.0-3-amd64/kernel/drivers/net/igb/igb.ko
version: 3.4.8
license: GPL
description: Intel(R) Gigabit Ethernet Network Driver
author: Intel Corporation, <e1000-devel@lists.sourceforge.net>
srcversion: 6787C332FBA1896DE20048A
alias: pci:v00008086d000010D6sv*sd*bc*sc*i*
alias: pci:v00008086d000010A9sv*sd*bc*sc*i*
alias: pci:v00008086d000010A7sv*sd*bc*sc*i*
alias: pci:v00008086d000010E8sv*sd*bc*sc*i*
alias: pci:v00008086d00001526sv*sd*bc*sc*i*
alias: pci:v00008086d0000150Dsv*sd*bc*sc*i*
alias: pci:v00008086d000010E7sv*sd*bc*sc*i*
alias: pci:v00008086d000010E6sv*sd*bc*sc*i*
alias: pci:v00008086d00001518sv*sd*bc*sc*i*
alias: pci:v00008086d0000150Asv*sd*bc*sc*i*
alias: pci:v00008086d000010C9sv*sd*bc*sc*i*
alias: pci:v00008086d00000440sv*sd*bc*sc*i*
alias: pci:v00008086d0000043Csv*sd*bc*sc*i*
alias: pci:v00008086d0000043Asv*sd*bc*sc*i*
alias: pci:v00008086d00000438sv*sd*bc*sc*i*
alias: pci:v00008086d00001516sv*sd*bc*sc*i*
alias: pci:v00008086d00001511sv*sd*bc*sc*i*
alias: pci:v00008086d00001510sv*sd*bc*sc*i*
alias: pci:v00008086d00001527sv*sd*bc*sc*i*
alias: pci:v00008086d0000150Fsv*sd*bc*sc*i*
alias: pci:v00008086d0000150Esv*sd*bc*sc*i*
alias: pci:v00008086d00001524sv*sd*bc*sc*i*
alias: pci:v00008086d00001523sv*sd*bc*sc*i*
alias: pci:v00008086d00001522sv*sd*bc*sc*i*
alias: pci:v00008086d00001521sv*sd*bc*sc*i*
depends: dca
vermagic: 3.2.0-3-amd64 SMP mod_unload modversions
parm: InterruptThrottleRate:Maximum interrupts per second, per vector, (max 100000), default 3=adaptive (array of int)
parm: IntMode:Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), default 2 (array of int)
parm: Node:set the starting node to allocate memory on, default -1 (array of int)
parm: LLIPort:Low Latency Interrupt TCP Port (0-65535), default 0=off (array of int)
parm: LLIPush:Low Latency Interrupt on TCP Push flag (0,1), default 0=off (array of int)
parm: LLISize:Low Latency Interrupt on Packet Size (0-1500), default 0=off (array of int)
parm: RSS:Number of Receive-Side Scaling Descriptor Queues (0-8), default 1=number of cpus (array of int)
parm: VMDQ:Number of Virtual Machine Device Queues: 0-1 = disable, 2-8 enable, default 0 (array of int)
parm: max_vfs:Number of Virtual Functions: 0 = disable, 1-7 enable, default 0 (array of int)
parm: MDD:Malicious Driver Detection (0/1), default 1 = enabled. Only available when max_vfs is greater than 0 (array of int)
parm: QueuePairs:Enable TX/RX queue pairs for interrupt handling (0,1), default 1=on (array of int)
parm: EEE:Enable/disable on parts that support the feature (array of int)
parm: DMAC:Disable or set latency for DMA Coalescing ((0=off, 1000-10000(msec), 250, 500 (usec)) (array of int)
parm: LRO:Large Receive Offload (0,1), default 0=off (array of int)
parm: debug:Debug level (0=none, ..., 16=all) (int)
-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=5c42c4fa-bf42-4f1f-9aa7-4b8f6a0f93eb ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 4.062301] igb 0000:08:00.1: irq 145 for MSI/MSI-X
[ 4.067152] e1000e 0000:0a:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:e0:81:de:35:f8
[ 4.067156] e1000e 0000:0a:00.0: eth3: Intel(R) PRO/1000 Network Connection
[ 4.067246] e1000e 0000:0a:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 4.067256] e1000e 0000:0b:00.0: Disabling ASPM L0s L1
[ 4.067269] e1000e 0000:0b:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.067287] e1000e 0000:0b:00.0: setting latency timer to 64
[ 4.067509] e1000e 0000:0b:00.0: irq 146 for MSI/MSI-X
[ 4.067515] e1000e 0000:0b:00.0: irq 147 for MSI/MSI-X
[ 4.067522] e1000e 0000:0b:00.0: irq 148 for MSI/MSI-X
[ 4.142616] igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 4.142620] igb 0000:08:00.1: eth4: (PCIe:5.0GT/s:Width x2
[ 4.142621] )
[ 4.142622] igb 0000:08:00.1: eth4: MAC: 00:e0:81:de:35:fb
[ 4.142699] igb 0000:08:00.1: eth4: PBA No: 104800-000
[ 4.149797] igb 0000:08:00.1: LRO is disabled
[ 4.149801] igb 0000:08:00.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 4.179247] e1000e 0000:0b:00.0: eth5: (PCI Express:2.5GT/s:Width x1) 00:e0:81:de:35:f9
[ 4.179250] e1000e 0000:0b:00.0: eth5: Intel(R) PRO/1000 Network Connection
[ 4.179340] e1000e 0000:0b:00.0: eth5: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 4.293790] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 4.297777] 3w-sas: scsi0: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:.
[ 4.409763] scsi0 : 3w-sas
[ 4.426156] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.426159] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.426559] hub 1-1:1.0: USB hub found
[ 4.426604] hub 1-1:1.0: 6 ports detected
[ 4.497756] Refined TSC clocksource calibration: 1999.999 MHz.
[ 4.497761] Switching to clocksource tsc
[ 4.521758] 3w-sas: scsi0: Found an LSI 3ware 9750-8i Controller at 0xdfe60000, IRQ: 42.
[ 4.537768] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.670150] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.670154] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.670554] hub 2-1:1.0: USB hub found
[ 4.670635] hub 2-1:1.0: 8 ports detected
[ 4.741904] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[ 4.834777] usb 1-1.5: New USB device found, idVendor=046b, idProduct=ff01
[ 4.834780] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.834783] usb 1-1.5: Product: Virtual Hub
[ 4.834784] usb 1-1.5: Manufacturer: American Megatrends Inc.
[ 4.834786] usb 1-1.5: SerialNumber: serial
[ 4.835385] hub 1-1.5:1.0: USB hub found
[ 4.835468] hub 1-1.5:1.0: 5 ports detected
[ 4.857762] 3w-sas: scsi0: Firmware FH9X 5.12.00.007, BIOS BE9X 5.11.00.006, Phys: 8.
[ 4.858339] scsi 0:0:0:0: Direct-Access LSI 9750-8i DISK 5.12 PQ: 0 ANSI: 5
[ 4.861659] scsi 0:0:1:0: Direct-Access LSI 9750-8i DISK 5.12 PQ: 0 ANSI: 5
[ 4.897226] scsi: waiting for bus probes to complete ...
[ 5.157902] usb 1-1.5.1: new low-speed USB device number 4 using ehci_hcd
[ 5.270789] sd 0:0:0:0: [sda] 117166080 512-byte logical blocks: (59.9 GB/55.8 GiB)
[ 5.272866] sd 0:0:1:0: [sdb] 7031160832 512-byte logical blocks: (3.59 TB/3.27 TiB)
[ 5.272941] sd 0:0:0:0: [sda] Write Protect is off
[ 5.272958] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
[ 5.275072] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 5.275255] sd 0:0:1:0: [sdb] Write Protect is off
[ 5.275259] sd 0:0:1:0: [sdb] Mode Sense: 23 00 10 00
[ 5.276458] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 5.281788] sda: sda1
[ 5.284371] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.292624] sdb:
[ 5.295526] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 5.323128] usb 1-1.5.1: New USB device found, idVendor=046b, idProduct=ff10
[ 5.323131] usb 1-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.323134] usb 1-1.5.1: Product: Virtual Keyboard and Mouse
[ 5.323136] usb 1-1.5.1: Manufacturer: American Megatrends Inc.
[ 5.328049] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input0
[ 5.328273] generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.5.1/input0
[ 5.328857] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.1/input/input1
[ 5.328946] generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.5.1/input1
[ 5.328971] usbcore: registered new interface driver usbhid
[ 5.328973] usbhid: USB HID core driver
[ 5.445719] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.689695] udev[559]: starting version 164
[ 5.726134] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.726142] ACPI: Power Button [PWRB]
[ 5.726211] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.726215] ACPI: Power Button [PWRF]
[ 5.760426] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 5.778663] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.790978] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.797644] udev[574]: renamed network interface eth1 to eth1-eth4
[ 5.811397] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.820080] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.850286] udev[586]: renamed network interface eth3 to eth1
[ 5.890262] udev[587]: renamed network interface eth5 to eth3
[ 5.962249] udev[585]: renamed network interface eth4 to eth4-eth2
[ 6.018239] udev[584]: renamed network interface eth2 to eth2-eth0
[ 6.078255] udev[572]: renamed network interface eth0 to eth0-eth5
[ 6.142225] udev[574]: renamed network interface eth1-eth4 to eth4
[ 6.210228] udev[585]: renamed network interface eth4-eth2 to eth2
[ 6.274234] udev[584]: renamed network interface eth2-eth0 to eth0
[ 6.338227] udev[572]: renamed network interface eth0-eth5 to eth5
[ 6.512872] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6.633208] EXT4-fs (sda1): re-mounted. Opts: errors=panic,discard,nouser_xattr
[ 6.651680] loop: module loaded
[ 6.946950] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 6.950763] e1000e: eth1 NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6.950769] e1000e 0000:0a:00.0: eth1: 10/100 speed: disabling TSO
[ 6.951502] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 7.327499] sshd (1511): /proc/1511/oom_adj is deprecated, please use /proc/1511/oom_score_adj instead.
[ 17.881717] eth1: no IPv6 routers present
** Model information
sys_vendor: empty
product_name: empty
product_version: empty
chassis_vendor: empty
chassis_version: empty
bios_vendor: American Megatrends Inc.
bios_version: V1.02I
board_vendor: TYAN
board_name: S7050
board_version: empty
08:00.0 Ethernet controller [0200]: Intel Corporation Device [8086:1521] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfc20000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 6020 [size=32]
Region 3: Memory at dfcc4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <32us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 00-e0-81-ff-ff-de-35-fa
Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
IOVSta: Migration-
Initial VFs: 8, Total VFs: 8, Number of VFs: 8, Function Dependency Link: 00
VF offset: 384, stride: 4, Device ID: 1520
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at dfca0000 (32-bit, non-prefetchable)
Region 3: Memory at dfc80000 (32-bit, non-prefetchable)
VF Migration: offset: 00000000, BIR: 0
Capabilities: [1a0 v1] #17
Capabilities: [1c0 v1] #18
Capabilities: [1d0 v1] Access Control Services
ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: igb
08:00.1 Ethernet controller [0200]: Intel Corporation Device [8086:1521] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 6000 [size=32]
Region 3: Memory at dfcc0000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <32us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 00-e0-81-ff-ff-de-35-fa
Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
IOVSta: Migration-
Initial VFs: 8, Total VFs: 8, Number of VFs: 8, Function Dependency Link: 01
VF offset: 384, stride: 4, Device ID: 1520
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at dfc60000 (32-bit, non-prefetchable)
Region 3: Memory at dfc40000 (32-bit, non-prefetchable)
VF Migration: offset: 00000000, BIR: 0
Capabilities: [1a0 v1] #17
Capabilities: [1d0 v1] Access Control Services
ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: igb
-- System Information:
Debian Release: 6.0.5
APT prefers stable
APT policy: (700, 'stable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-3-amd64 (SMP w/24 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.107 generic modular initramfs generato
ii linux-base 3.5 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-3.2.0-3-amd64 recommends:
ii firmware-linux-free 3.1 Binary firmware for various driver
Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel- <none> (no description available)
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-3.2 <none> (no description available)
Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none> (no description available)
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-brcm80211 <none> (no description available)
pn firmware-intelwimax <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
ii firmware-linux 0.28+squeeze1 Binary firmware for various driver
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver
pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn firmware-realtek <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true
--- End Message ---