Bug#669006: ata_piix poor performance on ich5
On Mon, Apr 16, 2012 at 11:17:23AM -0500, Jonathan Nieder wrote:
: Teemu Järvinen wrote:
: > At first I noticed that NFS performance is low when tried to access this
: > server, and any serious reading attempt leads nfsd consuming all the
: > available cpu time. Later it became obvious that the local filesystem
: > is to blame, it behaves like there is no DMA.
:
: Please attach full "dmesg" output from booting and reproducing the problem.
I'll attach my dmesg
: Also, just to rule out a userspace (udev, etc) problem: if you install
: the squeeze kernel on your wheezy/sid system, it doesn't reproduce the
: problem, right?
Well, I might be barking at the wrong tree here?
I'm not able to use the exactly same kernel I was using with squeeze,
it was a custom 2.6.32.8 and I'm not able to fiddle with it as it
seems to not support my usb-keyboard I'm using to poke with it now.
With squeeze's 2.6.32-5-486 tried simple dd if=/dev/zero of=foo (512 MB)
which does not consume all the cpu time. There's a little difference
in performance:
3.2.0-2-486 33.9 MB/s
2.6.32-5-486 45.9 MB/s
However, didn't try this (yet) with 2.6.32 as I didn't have my X
running and didn't know that my dd-test was not heavy enough...
When copying about 1.3 GB over NFS, the cpu load is at 100% -
Pretty sure this was not the case when running squeeze.
--
Teemu
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-486 (Debian 3.2.12-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 Tue Mar 20 18:45:21 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.2 present.
[ 0.000000] DMI: /IS7-E2 (Intel i865-ICH5), BIOS 6.00 PG 06/01/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5bc0] f5bc0
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 7fd31000 - 7fff0000
[ 0.000000] Allocated new RAMDISK: 3753f000 - 377fd884
[ 0.000000] Move RAMDISK from 000000007fd31000 - 000000007ffef883 to 3753f000 - 377fd883
[ 0.000000] ACPI: RSDP 000f7750 00014 (v00 IntelR)
[ 0.000000] ACPI: RSDT 7fff3000 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fff3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fff30c0 0445C (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: APIC 7fff7540 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c13cb578, node_mem_map f653e200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: BOOT_IMAGE=debian3.2.0 ro root=900
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[ 0.000000] Memory: 2071680k/2097088k available (2589k kernel code, 24956k reserved, 1325k data, 448k init, 1187784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13d3000 - 0xc1443000 ( 448 kB)
[ 0.000000] .data : 0xc128766c - 0xc13d2e00 (1325 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128766c (2589 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2049.255 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4098.51 BogoMIPS (lpj=8197020)
[ 0.004109] pid_max: default: 32768 minimum: 301
[ 0.004219] Security Framework initialized
[ 0.004275] AppArmor: AppArmor disabled by boot time parameter
[ 0.004351] Mount-cache hash table entries: 512
[ 0.004561] Initializing cgroup subsys cpuacct
[ 0.004624] Initializing cgroup subsys memory
[ 0.004685] Initializing cgroup subsys devices
[ 0.004737] Initializing cgroup subsys freezer
[ 0.004788] Initializing cgroup subsys net_cls
[ 0.004840] Initializing cgroup subsys blkio
[ 0.004899] Initializing cgroup subsys perf_event
[ 0.005015] CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
[ 0.005881] ACPI: Core revision 20110623
[ 0.012099] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.012243] ... version: 0
[ 0.012294] ... bit width: 40
[ 0.012344] ... generic registers: 18
[ 0.012395] ... value mask: 000000ffffffffff
[ 0.012447] ... max period: 0000007fffffffff
[ 0.012499] ... fixed-purpose events: 0
[ 0.012549] ... event mask: 000000000003ffff
[ 0.012858] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.012990] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056003] devtmpfs: initialized
[ 0.056003] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
[ 0.056003] print_constraints: dummy:
[ 0.056003] NET: Registered protocol family 16
[ 0.056003] EISA bus registered
[ 0.056003] ACPI: bus type pci registered
[ 0.082470] PCI: PCI BIOS revision 2.10 entry at 0xfba40, last bus=2
[ 0.082528] PCI: Using configuration type 1 for base access
[ 0.083804] bio: create slab <bio-0> at 0
[ 0.084060] ACPI: Added _OSI(Module Device)
[ 0.084117] ACPI: Added _OSI(Processor Device)
[ 0.084169] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.084222] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.085242] ACPI: EC: Look up EC in DSDT
[ 0.090125] ACPI: Interpreter enabled
[ 0.090193] ACPI: (supports S0 S1 S4 S5)
[ 0.090427] ACPI: Using IOAPIC for interrupt routing
[ 0.196099] ACPI: Power Resource [PFAN] (off)
[ 0.296582] ACPI: No dock devices found.
[ 0.296640] HEST: Table not found.
[ 0.296694] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.296894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.297214] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.297221] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.297226] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.297231] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.297236] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.297262] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
[ 0.297269] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.297335] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.297438] pci 0000:00:01.0: [8086:2571] type 1 class 0x000604
[ 0.297497] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
[ 0.297514] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[ 0.297623] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[ 0.297679] pci 0000:00:1d.0: reg 20: [io 0xbc00-0xbc1f]
[ 0.297724] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[ 0.297779] pci 0000:00:1d.1: reg 20: [io 0xb000-0xb01f]
[ 0.297825] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[ 0.297880] pci 0000:00:1d.2: reg 20: [io 0xb400-0xb41f]
[ 0.297925] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[ 0.297980] pci 0000:00:1d.3: reg 20: [io 0xb800-0xb81f]
[ 0.298039] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[ 0.298067] pci 0000:00:1d.7: reg 10: [mem 0xfc000000-0xfc0003ff]
[ 0.298181] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.298189] pci 0000:00:1d.7: PME# disabled
[ 0.298214] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.298274] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[ 0.298353] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.298384] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101
[ 0.298401] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.298413] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.298425] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.298437] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.298450] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[ 0.298494] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[ 0.298549] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.298616] pci 0000:01:00.0: [1002:5960] type 0 class 0x000300
[ 0.298638] pci 0000:01:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 0.298650] pci 0000:01:00.0: reg 14: [io 0x9000-0x90ff]
[ 0.298662] pci 0000:01:00.0: reg 18: [mem 0xf9000000-0xf900ffff]
[ 0.298695] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.298736] pci 0000:01:00.0: supports D1 D2
[ 0.298760] pci 0000:01:00.1: [1002:5940] type 0 class 0x000380
[ 0.298779] pci 0000:01:00.1: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.298791] pci 0000:01:00.1: reg 14: [mem 0xf9010000-0xf901ffff]
[ 0.298856] pci 0000:01:00.1: supports D1 D2
[ 0.298908] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.298966] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.298973] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.298979] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf7ffffff pref]
[ 0.299014] pci 0000:02:02.0: [10ec:8139] type 0 class 0x000200
[ 0.299036] pci 0000:02:02.0: reg 10: [io 0xa000-0xa0ff]
[ 0.299050] pci 0000:02:02.0: reg 14: [mem 0xfb000000-0xfb0000ff]
[ 0.299098] pci 0000:02:02.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.299132] pci 0000:02:02.0: supports D1 D2
[ 0.299136] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.299143] pci 0000:02:02.0: PME# disabled
[ 0.299165] pci 0000:02:04.0: [1131:7146] type 0 class 0x000480
[ 0.299183] pci 0000:02:04.0: reg 10: [mem 0xfb001000-0xfb0011ff]
[ 0.299264] pci 0000:02:05.0: [10ec:8169] type 0 class 0x000200
[ 0.299286] pci 0000:02:05.0: reg 10: [io 0xa400-0xa4ff]
[ 0.299299] pci 0000:02:05.0: reg 14: [mem 0xfb002000-0xfb0020ff]
[ 0.299348] pci 0000:02:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.299381] pci 0000:02:05.0: supports D1 D2
[ 0.299385] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.299391] pci 0000:02:05.0: PME# disabled
[ 0.299412] pci 0000:02:06.0: [1131:7146] type 0 class 0x000480
[ 0.299430] pci 0000:02:06.0: reg 10: [mem 0xfb003000-0xfb0031ff]
[ 0.299532] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.299593] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.299600] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.299608] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.299612] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.299632] pci_bus 0000:00: on NUMA node 0
[ 0.299643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.299805] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.300181] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.309758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.310358] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.310953] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.311548] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.312151] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.312745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.313339] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.313934] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.314625] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.314698] vgaarb: loaded
[ 0.314747] vgaarb: bridge control possible 0000:01:00.0
[ 0.314894] PCI: Using ACPI for IRQ routing
[ 0.314951] PCI: pci_cache_line_size set to 64 bytes
[ 0.315042] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.315047] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.315352] hpet clockevent registered
[ 0.315361] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.315424] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.315622] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.320113] Switching to clocksource hpet
[ 0.322395] pnp: PnP ACPI init
[ 0.322479] ACPI: bus type pnp registered
[ 0.322696] pnp 00:00: [bus 00-ff]
[ 0.322702] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.322707] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.322714] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.322719] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.322723] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.322727] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.322832] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.322895] pnp 00:01: [io 0x0010-0x001f]
[ 0.322900] pnp 00:01: [io 0x0022-0x003f]
[ 0.322904] pnp 00:01: [io 0x0044-0x005f]
[ 0.322907] pnp 00:01: [io 0x0062-0x0063]
[ 0.322911] pnp 00:01: [io 0x0065-0x006f]
[ 0.322914] pnp 00:01: [io 0x0074-0x007f]
[ 0.322918] pnp 00:01: [io 0x0091-0x0093]
[ 0.322921] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.322925] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.322928] pnp 00:01: [io 0x0b78-0x0b7b]
[ 0.322932] pnp 00:01: [io 0x0f78-0x0f7b]
[ 0.322935] pnp 00:01: [io 0x0a78-0x0a7b]
[ 0.322939] pnp 00:01: [io 0x0e78-0x0e7b]
[ 0.322942] pnp 00:01: [io 0x0bbc-0x0bbf]
[ 0.322946] pnp 00:01: [io 0x0fbc-0x0fbf]
[ 0.322949] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.322953] pnp 00:01: [io 0x0294-0x0297]
[ 0.323066] system 00:01: [io 0x0b78-0x0b7b] has been reserved
[ 0.323126] system 00:01: [io 0x0f78-0x0f7b] has been reserved
[ 0.323188] system 00:01: [io 0x0a78-0x0a7b] has been reserved
[ 0.323245] system 00:01: [io 0x0e78-0x0e7b] has been reserved
[ 0.323302] system 00:01: [io 0x0bbc-0x0bbf] has been reserved
[ 0.323359] system 00:01: [io 0x0fbc-0x0fbf] has been reserved
[ 0.323416] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.323474] system 00:01: [io 0x0294-0x0297] has been reserved
[ 0.323533] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.323567] pnp 00:02: [dma 4]
[ 0.323572] pnp 00:02: [io 0x0000-0x000f]
[ 0.323576] pnp 00:02: [io 0x0080-0x0090]
[ 0.323580] pnp 00:02: [io 0x0094-0x009f]
[ 0.323583] pnp 00:02: [io 0x00c0-0x00df]
[ 0.323647] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.323678] pnp 00:03: [io 0x0070-0x0073]
[ 0.323694] pnp 00:03: [irq 8]
[ 0.323764] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.323790] pnp 00:04: [io 0x0061]
[ 0.323852] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.323876] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.323889] pnp 00:05: [irq 13]
[ 0.323961] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.324142] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.324147] pnp 00:06: [io 0x03f7]
[ 0.324162] pnp 00:06: [irq 6]
[ 0.324166] pnp 00:06: [dma 2]
[ 0.324272] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.324584] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.324598] pnp 00:07: [irq 4]
[ 0.324748] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.325448] pnp 00:08: [io 0x0378-0x037f]
[ 0.325454] pnp 00:08: [io 0x0778-0x077b]
[ 0.325467] pnp 00:08: [irq 7]
[ 0.325611] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.325847] pnp 00:09: [io 0x0060]
[ 0.325852] pnp 00:09: [io 0x0064]
[ 0.325965] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.326026] pnp 00:0a: [io 0x0400-0x04bf]
[ 0.326141] system 00:0a: [io 0x0400-0x04bf] has been reserved
[ 0.326203] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.326267] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
[ 0.326345] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.326955] pnp 00:0c: [mem 0x000d9000-0x000dbfff]
[ 0.326960] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.326964] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.326967] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.326971] pnp 00:0c: [mem 0x7fff0000-0x7fffffff]
[ 0.326975] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.326979] pnp 00:0c: [mem 0x00100000-0x7ffeffff]
[ 0.326982] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.326986] pnp 00:0c: [mem 0xfec01000-0xfed8ffff]
[ 0.326990] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.326994] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
[ 0.326998] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.327001] pnp 00:0c: [mem 0x000e0000-0x000effff]
[ 0.327160] system 00:0c: [mem 0x000d9000-0x000dbfff] has been reserved
[ 0.327222] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.327281] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.327339] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.327398] system 00:0c: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.327457] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.327516] system 00:0c: [mem 0x00100000-0x7ffeffff] could not be reserved
[ 0.327575] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.327633] system 00:0c: [mem 0xfec01000-0xfed8ffff] could not be reserved
[ 0.327692] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.327750] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.327811] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.330706] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[ 0.330768] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.330791] pnp: PnP ACPI: found 13 devices
[ 0.330843] ACPI: ACPI bus type pnp unregistered
[ 0.330898] PnPBIOS: Disabled by ACPI PNP
[ 0.371055] PCI: max bus depth: 1 pci_try_num: 2
[ 0.371088] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
[ 0.371162] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
[ 0.371227] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.371282] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.371341] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.371400] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf7ffffff pref]
[ 0.371473] pci 0000:02:05.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.371539] pci 0000:02:02.0: BAR 6: assigned [mem 0x80020000-0x8002ffff pref]
[ 0.371603] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.371658] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.371716] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.371774] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x800fffff pref]
[ 0.371857] pci 0000:00:1e.0: setting latency timer to 64
[ 0.371864] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.371868] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.371873] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.371877] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.371881] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf7ffffff pref]
[ 0.371885] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.371889] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.371893] pci_bus 0000:02: resource 2 [mem 0x80000000-0x800fffff pref]
[ 0.371897] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.371901] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.371971] NET: Registered protocol family 2
[ 0.372150] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.372619] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.373668] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.373971] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.374030] TCP reno registered
[ 0.374087] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.374149] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.374349] NET: Registered protocol family 1
[ 0.374461] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.374535] pci 0000:00:1d.0: PCI INT A disabled
[ 0.374607] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.374679] pci 0000:00:1d.1: PCI INT B disabled
[ 0.374749] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.374821] pci 0000:00:1d.2: PCI INT C disabled
[ 0.374884] pci 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.374955] pci 0000:00:1d.3: PCI INT A disabled
[ 0.375025] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.375114] pci 0000:00:1d.7: PCI INT D disabled
[ 0.375188] pci 0000:01:00.0: Boot video device
[ 0.375206] PCI: CLS 32 bytes, default 64
[ 0.375303] Unpacking initramfs...
[ 0.515681] Freeing initrd memory: 2812k freed
[ 0.519239] audit: initializing netlink socket (disabled)
[ 0.519319] type=2000 audit(1334662964.512:1): initialized
[ 0.545066] highmem bounce pool size: 64 pages
[ 0.545131] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.545417] VFS: Disk quotas dquot_6.5.2
[ 0.545510] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.545666] msgmni has been set to 1731
[ 0.546067] alg: No test for stdrng (krng)
[ 0.546194] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.546262] io scheduler noop registered
[ 0.546315] io scheduler deadline registered
[ 0.546384] io scheduler cfq registered (default)
[ 0.546659] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.546761] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.546818] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.547421] ERST: Table is not found!
[ 0.547477] GHES: HEST is not enabled!
[ 0.547556] isapnp: Scanning for PnP cards...
[ 0.901597] isapnp: No Plug & Play device found
[ 0.901789] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.922213] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.943244] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.943759] Linux agpgart interface v0.103
[ 0.944051] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 0.951283] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 0.951621] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.204317] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.204644] mousedev: PS/2 mouse device common for all mice
[ 1.204801] rtc_cmos 00:03: RTC can wake from S4
[ 1.205032] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.205120] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.205290] EISA: Probing bus 0 at eisa.0
[ 1.205384] EISA: Detected 0 cards.
[ 1.205436] cpuidle: using governor ladder
[ 1.205488] cpuidle: using governor menu
[ 1.205894] TCP cubic registered
[ 1.205997] NET: Registered protocol family 10
[ 1.206934] Mobile IPv6
[ 1.206992] NET: Registered protocol family 17
[ 1.207052] Registering the dns_resolver key type
[ 1.207133] Using IPI Shortcut mode
[ 1.207455] PM: Hibernation image not present or could not be loaded.
[ 1.207476] registered taskstats version 1
[ 1.207866] rtc_cmos 00:03: setting system clock to 2012-04-17 11:42:45 UTC (1334662965)
[ 1.208033] Initializing network drop monitor service
[ 1.208278] Freeing unused kernel memory: 448k freed
[ 1.208817] Write protecting the kernel text: 2592k
[ 1.208900] Write protecting the kernel read-only data: 1060k
[ 1.252422] udevd[42]: starting version 175
[ 1.480242] ACPI: Fan [FAN] (off)
[ 1.516086] Refined TSC clocksource calibration: 2049.289 MHz.
[ 1.516153] Switching to clocksource tsc
[ 1.531591] SCSI subsystem initialized
[ 1.566292] libata version 3.00 loaded.
[ 1.567041] ata_piix 0000:00:1f.2: version 2.13
[ 1.567065] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.567132] ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ]
[ 1.567390] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.571448] scsi0 : ata_piix
[ 1.575082] scsi1 : ata_piix
[ 1.576316] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.576378] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.680662] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.680722] ACPI: Thermal Zone [THRM] (47 C)
[ 1.744344] ata1.00: ATAPI: _NEC DVD_RW ND-4570A, 1.02, max UDMA/33
[ 1.756838] ata2.00: ATA-8: WDC WD5000AACS-00G8B1, 05.04C05, max UDMA/133
[ 1.756898] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.760219] ata1.00: configured for UDMA/33
[ 1.761711] scsi 0:0:0:0: CD-ROM _NEC DVD_RW ND-4570A 1.02 PQ: 0 ANSI: 5
[ 1.776626] ata2.01: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
[ 1.776688] ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.784844] ata2.00: configured for UDMA/133
[ 1.801132] ata2.01: configured for UDMA/133
[ 1.801372] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AACS-0 05.0 PQ: 0 ANSI: 5
[ 1.801867] scsi 1:0:1:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 1.831575] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.831804] sd 1:0:0:0: [sda] Write Protect is off
[ 1.831861] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.831933] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.851914] sd 1:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.852171] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.852229] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.852299] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.853035] sda: sda1
[ 1.855840] sdb: sdb1
[ 1.856334] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.857151] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 2.130380] md: raid1 personality registered for level 1
[ 2.137333] mdadm: sending ioctl 800c0910 to a partition!
[ 2.137402] mdadm: sending ioctl 800c0910 to a partition!
[ 2.137484] mdadm: sending ioctl 1261 to a partition!
[ 2.137538] mdadm: sending ioctl 1261 to a partition!
[ 2.138012] mdadm: sending ioctl 1261 to a partition!
[ 2.138071] mdadm: sending ioctl 1261 to a partition!
[ 2.138402] mdadm: sending ioctl 1261 to a partition!
[ 2.138461] mdadm: sending ioctl 1261 to a partition!
[ 2.138777] mdadm: sending ioctl 1261 to a partition!
[ 2.138835] mdadm: sending ioctl 1261 to a partition!
[ 2.144083] md: md0 stopped.
[ 2.150763] md: bind<sdb1>
[ 2.151257] md: bind<sda1>
[ 2.164353] bio: create slab <bio-1> at 1
[ 2.164552] md/raid1:md0: active with 2 out of 2 mirrors
[ 2.164653] md0: detected capacity change from 0 to 500105150464
[ 2.169925] md0:
[ 2.330093] kjournald starting. Commit interval 5 seconds
[ 2.330388] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 4.437455] udevd[247]: starting version 175
[ 5.177464] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 5.177543] ACPI: Power Button [PWRB]
[ 5.177748] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.177820] ACPI: Power Button [PWRF]
[ 5.304886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.308783] parport_pc 00:08: reported by Plug and Play ACPI
[ 5.308902] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.310880] Floppy drive(s): fd0 is 1.44M
[ 5.327892] FDC 0 is a post-1991 82077
[ 5.499334] intel_rng: FWH not detected
[ 5.559845] usbcore: registered new interface driver usbfs
[ 5.559953] usbcore: registered new interface driver hub
[ 5.562309] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.573278] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.573376] r8169 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.573466] r8169 0000:02:05.0: (unregistered net_device): not PCI Express
[ 5.574379] r8169 0000:02:05.0: eth0: RTL8169sb/8110sb at 0xf8024000, 00:06:4f:9a:9f:27, XID 10000000 IRQ 21
[ 5.574452] r8169 0000:02:05.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 5.575837] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 5.575934] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 5.589965] usbcore: registered new device driver usb
[ 5.608404] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.608515] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 5.608603] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.608609] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.608701] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 5.608813] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.612751] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.614532] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5.614657] 8139too 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.617612] 8139too 0000:02:02.0: eth1: RealTek RTL8139 at 0xa000, 00:50:8d:61:a2:14, IRQ 18
[ 5.631771] iTCO_vendor_support: vendor-support=0
[ 5.638247] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc000000
[ 5.653753] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.664085] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.664216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.664277] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.664340] usb usb1: Product: EHCI Host Controller
[ 5.664392] usb usb1: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
[ 5.664446] usb usb1: SerialNumber: 0000:00:1d.7
[ 5.664874] hub 1-0:1.0: USB hub found
[ 5.664939] hub 1-0:1.0: 8 ports detected
[ 5.665164] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.665239] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.665246] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.665320] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.665433] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bc00
[ 5.665552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.665610] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.665673] usb usb2: Product: UHCI Host Controller
[ 5.665726] usb usb2: Manufacturer: Linux 3.2.0-2-486 uhci_hcd
[ 5.665779] usb usb2: SerialNumber: 0000:00:1d.0
[ 5.666098] hub 2-0:1.0: USB hub found
[ 5.666163] hub 2-0:1.0: 2 ports detected
[ 5.666364] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.666438] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.666444] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.666515] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.666621] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[ 5.666734] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.666792] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.666855] usb usb3: Product: UHCI Host Controller
[ 5.666907] usb usb3: Manufacturer: Linux 3.2.0-2-486 uhci_hcd
[ 5.666961] usb usb3: SerialNumber: 0000:00:1d.1
[ 5.668235] hub 3-0:1.0: USB hub found
[ 5.668301] hub 3-0:1.0: 2 ports detected
[ 5.668499] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.668573] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.668580] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.668652] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.668764] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[ 5.668880] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.668938] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.669001] usb usb4: Product: UHCI Host Controller
[ 5.669054] usb usb4: Manufacturer: Linux 3.2.0-2-486 uhci_hcd
[ 5.669107] usb usb4: SerialNumber: 0000:00:1d.2
[ 5.670724] hub 4-0:1.0: USB hub found
[ 5.670790] hub 4-0:1.0: 2 ports detected
[ 5.670992] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.671067] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.671073] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.671146] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.671245] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[ 5.671361] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.671420] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.671483] usb usb5: Product: UHCI Host Controller
[ 5.671535] usb usb5: Manufacturer: Linux 3.2.0-2-486 uhci_hcd
[ 5.671588] usb usb5: SerialNumber: 0000:00:1d.3
[ 5.677942] hub 5-0:1.0: USB hub found
[ 5.678009] hub 5-0:1.0: 2 ports detected
[ 5.764473] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.784977] [drm] Initialized drm 1.1.0 20060810
[ 5.828305] udevd[268]: renamed network interface eth1 to rename3
[ 5.829964] udevd[267]: renamed network interface eth0 to eth1
[ 5.873757] saa7146: register extension 'budget_ci dvb'
[ 5.873875] budget_ci dvb 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.874000] saa7146: found saa7146 @ mem f8032000 (revision 1, irq 20) (0x13c2,0x1010)
[ 5.874070] saa7146 (0): dma buffer size 192512
[ 5.874123] DVB: registering new adapter (TT-Budget-C-CI PCI)
[ 5.879368] udevd[268]: renamed network interface rename3 to eth0
[ 5.897950] IR NEC protocol handler initialized
[ 5.910703] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.910902] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 5.913433] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.915828] adapter has MAC addr = 00:d0:5c:67:c4:58
[ 5.987588] IR RC5(x) protocol handler initialized
[ 5.990259] Linux media interface: v0.10
[ 6.032040] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 6.047271] Linux video capture interface: v2.00
[ 6.118369] IR RC6 protocol handler initialized
[ 6.157558] IR JVC protocol handler initialized
[ 6.174408] usb 1-2: New USB device found, idVendor=059f, idProduct=101a
[ 6.174472] usb 1-2: New USB device strings: Mfr=10, Product=11, SerialNumber=3
[ 6.174537] usb 1-2: Product: LaCie Hard Drive USB
[ 6.174591] usb 1-2: Manufacturer: LaCie
[ 6.174643] usb 1-2: SerialNumber: 00E0010B5FF09
[ 6.184064] Registered IR keymap rc-tt-1500
[ 6.184329] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:02:04.0/rc/rc0/input3
[ 6.184759] rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:02:04.0/rc/rc0
[ 6.226422] IR Sony protocol handler initialized
[ 6.239274] [drm] radeon kernel modesetting enabled.
[ 6.239451] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.241839] [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x148C:0x2094).
[ 6.241953] [drm] register mmio base: 0xF9000000
[ 6.242006] [drm] register mmio size: 65536
[ 6.242497] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 6.242577] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 6.242669] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 6.242749] radeon 0000:01:00.0: GTT: 128M 0xE0000000 - 0xE7FFFFFF
[ 6.242806] [drm] Generation 2 PCI interface, using max accessible memory
[ 6.242865] radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used)
[ 6.242948] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.243004] [drm] Driver supports precise vblank timestamp query.
[ 6.243074] [drm] radeon: irq initialized.
[ 6.243294] [drm] Detected VRAM RAM=128M, BAR=128M
[ 6.243351] [drm] RAM width 64bits DDR
[ 6.245598] [TTM] Zone kernel: Available graphics memory: 443578 kiB.
[ 6.245660] [TTM] Zone highmem: Available graphics memory: 1037470 kiB.
[ 6.245715] [TTM] Initializing pool allocator.
[ 6.245809] [drm] radeon: 128M of VRAM memory ready
[ 6.245866] [drm] radeon: 128M of GTT memory ready.
[ 6.253752] saa7146: register extension 'av7110'
[ 6.254806] radeon 0000:01:00.0: WB disabled
[ 6.255013] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.255083] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.257883] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.262018] [drm] Loading R200 Microcode
[ 6.285067] IR MCE Keyboard/mouse protocol handler initialized
[ 6.346898] DVB: registering adapter 0 frontend 0 (ST STV0297 DVB-C)...
[ 6.347452] av7110 0000:02:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.347573] saa7146: found saa7146 @ mem f8034000 (revision 1, irq 22) (0x13c2,0x000a)
[ 6.415875] lirc_dev: IR Remote Control driver registered, major 251
[ 6.496492] IR LIRC bridge handler initialized
[ 6.506627] [drm] radeon: ring at 0x00000000E0001000
[ 6.506706] [drm] ring test succeeded in 1 usecs
[ 6.507236] [drm] radeon: ib pool ready.
[ 6.507414] [drm] ib test succeeded in 0 usecs
[ 6.507995] [drm] Radeon Display Connectors
[ 6.508097] [drm] Connector 0:
[ 6.508149] [drm] VGA
[ 6.508198] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 6.508251] [drm] Encoders:
[ 6.508300] [drm] CRT1: INTERNAL_DAC1
[ 6.508350] [drm] Connector 1:
[ 6.508399] [drm] DVI-I
[ 6.508447] [drm] HPD1
[ 6.508496] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 6.508549] [drm] Encoders:
[ 6.508597] [drm] CRT2: INTERNAL_DAC2
[ 6.508647] [drm] DFP1: INTERNAL_TMDS1
[ 6.508697] [drm] Connector 2:
[ 6.508745] [drm] S-video
[ 6.508793] [drm] Encoders:
[ 6.508841] [drm] TV1: INTERNAL_DAC2
[ 6.593785] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 6.621725] [drm] fb mappable at 0xE8040000
[ 6.621782] [drm] vram apper at 0xE8000000
[ 6.621833] [drm] size 5185536
[ 6.621882] [drm] fb depth is 24
[ 6.621931] [drm] pitch is 5760
[ 6.622260] fbcon: radeondrmfb (fb0) is primary device
[ 6.700655] Console: switching to colour frame buffer device 180x56
[ 6.726515] fb0: radeondrmfb frame buffer device
[ 6.726651] drm: registered panic notifier
[ 6.727144] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 6.779655] DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X)
[ 6.813122] adapter has MAC addr = 00:d0:5c:04:ad:5b
[ 6.842439] usbcore: registered new interface driver uas
[ 6.853357] usb 2-1: New USB device found, idVendor=0603, idProduct=00f2
[ 6.853694] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.853903] usb 2-1: Product: USB Keyboard
[ 6.854133] usb 2-1: Manufacturer: NOVATEK
[ 6.862530] Initializing USB Mass Storage driver...
[ 6.868090] scsi2 : usb-storage 1-2:1.0
[ 6.868400] usbcore: registered new interface driver usb-storage
[ 6.868583] USB Mass Storage support registered.
[ 7.100261] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 7.126515] dvb-ttpci: gpioirq unknown type=0 len=0
[ 7.152147] dvb-ttpci: info @ card 1: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
[ 7.152404] dvb-ttpci: firmware @ card 1 supports CI link layer interface
[ 7.157923] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[ 7.160359] generic-usb 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 7.194476] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input5
[ 7.196090] generic-usb 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1/input1
[ 7.198976] usbcore: registered new interface driver usbhid
[ 7.199145] usbhid: USB HID core driver
[ 7.292743] usb 5-1: New USB device found, idVendor=03f0, idProduct=1e17
[ 7.292953] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.293157] usb 5-1: Product: hp LaserJet 1160 series
[ 7.293306] usb 5-1: Manufacturer: Hewlett-Packard
[ 7.293448] usb 5-1: SerialNumber: 00CNM2F99124
[ 7.328326] dvb_ttpci: DVB-C analog module @ card 1 detected, initializing MSP3415
[ 7.442601] dvb_ttpci: saa7113 not accessible
[ 7.509644] saa7146_vv: saa7146 (1): registered device video0 [v4l2]
[ 7.519091] saa7146_vv: saa7146 (1): registered device vbi0 [v4l2]
[ 7.527198] DVB: registering adapter 1 frontend 0 (ST STV0297 DVB-C)...
[ 7.536170] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[ 7.544381] input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:06.0/input/input6
[ 7.558812] dvb-ttpci: found av7110-0.
[ 7.802012] usb 5-2: New USB device found, idVendor=051d, idProduct=0002
[ 7.810490] usb 5-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 7.818926] usb 5-2: Product: Back-UPS CS 500 FW:808.q3.I USB FW:q3
[ 7.827364] usb 5-2: Manufacturer: American Power Conversion
[ 7.835823] usb 5-2: SerialNumber: BB0412038179
[ 7.868783] scsi 2:0:0:0: Direct-Access Hitachi HTS543232L9A300 PQ: 0 ANSI: 2 CCS
[ 7.882539] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 7.899637] sd 2:0:0:0: [sdc] Write Protect is off
[ 7.908531] sd 2:0:0:0: [sdc] Mode Sense: 34 00 00 00
[ 7.910510] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 7.948189] sdc: sdc1
[ 7.962516] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 8.382502] scsi_verify_blk_ioctl: 24 callbacks suppressed
[ 8.391793] mdadm: sending ioctl 800c0910 to a partition!
[ 8.401028] mdadm: sending ioctl 800c0910 to a partition!
[ 8.418518] mdadm: sending ioctl 1261 to a partition!
[ 8.427597] mdadm: sending ioctl 1261 to a partition!
[ 8.440590] mdadm: sending ioctl 800c0910 to a partition!
[ 8.449434] mdadm: sending ioctl 800c0910 to a partition!
[ 8.458771] mdadm: sending ioctl 1261 to a partition!
[ 8.467378] mdadm: sending ioctl 1261 to a partition!
[ 8.477649] mdadm: sending ioctl 1261 to a partition!
[ 8.486017] mdadm: sending ioctl 1261 to a partition!
[ 8.671107] usblp1: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1E17
[ 8.680397] usbcore: registered new interface driver usblp
[ 9.384150] generic-usb 0003:051D:0002.0003: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q3.I USB FW:q3] on usb-0000:00:1d.3-2/input0
[ 10.848206] EXT3-fs (md0): using internal journal
[ 11.961746] loop: module loaded
[ 12.120732] w83627hf: w83627hf: Found W83627HF chip at 0x290
[ 12.129394] ACPI: resource w83627hf [io 0x0295-0x0296] conflicts with ACPI region IP__ [io 0x295-0x296]
[ 12.137960] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.049397] Adding 2097148k swap on /swap. Priority:-1 extents:548 across:2156212k
[ 15.348122] fuse init (API version 7.17)
[ 15.920650] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.940769] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 17.481588] r8169 0000:02:05.0: eth1: link down
[ 17.490149] r8169 0000:02:05.0: eth1: link down
[ 17.499613] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.318648] 8139too 0000:02:02.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 20.532395] r8169 0000:02:05.0: eth1: link up
[ 20.541980] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 23.002783] IN=eth0 OUT= MAC= SRC=89.106.45.179 DST=224.0.0.251 LEN=258 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=238
[ 23.253172] IN=eth0 OUT= MAC= SRC=89.106.45.179 DST=224.0.0.251 LEN=258 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=238
[ 23.464644] tun: Universal TUN/TAP device driver, 1.6
[ 23.474198] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 31.480018] eth1: no IPv6 routers present
[ 47.097594] postgres (1920): /proc/1920/oom_adj is deprecated, please use /proc/1920/oom_score_adj instead.
[ 74.532620] RPC: Registered named UNIX socket transport module.
[ 74.546383] RPC: Registered udp transport module.
[ 74.560242] RPC: Registered tcp transport module.
[ 74.573715] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 74.630064] FS-Cache: Loaded
[ 74.679194] FS-Cache: Netfs 'nfs' registered for caching
[ 74.732460] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 75.047013] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 75.079896] NFSD: starting 90-second grace period
[ 80.027188] IN=eth0 OUT= MAC= SRC=89.106.45.179 DST=239.255.255.253 LEN=77 TOS=0x00 PREC=0x00 TTL=8 ID=0 DF PROTO=UDP SPT=38453 DPT=427 LEN=57
[ 85.146176] lp0: using parport0 (interrupt-driven).
[ 85.196737] ppdev: user-space parallel port driver
Reply to: