Bug#668655: udev: USB device update are broken
14.04.12 11:35, Jonathan Nieder напиÑав(ла):
Sergiy Gorel's'kiy wrote:
But, i don't find currently worked kernel :(
A squeeze kernel is supposed to work fine on a system with wheezy/sid
userspace. Have you tried it?
Curious,
Jonathan
A squeeze kernel don't work correctly too.
I copied kernel and initrd images to boot dir, also, copied
/lib/modules/2.6.32-5-amd64 from squeeze to wheezy.
System booting fine, but there is no reaction on inserting sdcard to
cardreader :( dmesg in attach.
Also, i boot with parameters "linux /vmlinuz-2.6.32-5-amd64
root=UUID=32b10bd8-760e-4121-8a54-441220200383 ro quiet init=/bin/sh"
And then try manualy to load usb modules. Loaded modules see in attach.
Then i run udevadm monitor, and see nothing in output when insert sdcard.
But when usb-flash connected directly to usb, the usb-flash was detected
normaly.
--
Regards, Sergiy Gorel's'kiy!
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-41squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Mar 22 17:26:33 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=32b10bd8-760e-4121-8a54-441220200383 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
[ 0.000000] BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfd81000 (usable)
[ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfd81 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfd81000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfd81000 page 4k
[ 0.000000] kernel direct mapping tables up to cfd81000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ a000-c000
[ 0.000000] RAMDISK: 3793a000 - 37c94434
[ 0.000000] ACPI: RSDP 00000000000f6ed0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfde3000 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfde30c0 06D75 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfde0000 00040
[ 0.000000] ACPI: HPET 00000000cfde9f00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfde9f40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfde9e40 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000058fff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016d95c4] TEXT DATA BSS ==> [0001000000 - 00016d95c4]
[ 0.000000] #3 [003793a000 - 0037c94434] RAMDISK ==> [003793a000 - 0037c94434]
[ 0.000000] #4 [0000098400 - 0000100000] BIOS reserved ==> [0000098400 - 0000100000]
[ 0.000000] #5 [00016da000 - 00016da0fe] BRK ==> [00016da000 - 00016da0fe]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f54e0] f54e0
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880001800000-ffff8800089fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000098
[ 0.000000] 0: 0x00000100 -> 0x000cfd81
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096409
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 109 pages reserved
[ 0.000000] DMA zone: 3827 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 832953 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 5 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000
[ 0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfd81000 - 00000000cfde0000
[ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
[ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008c00000 s90328 r8192 d24360 u262144
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064940
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=32b10bd8-760e-4121-8a54-441220200383 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 8191512k/9175040k available (3083k kernel code, 789404k absent, 194124k reserved, 2048k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2812.345 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5624.68 BogoMIPS (lpj=11249364)
[ 0.008020] Security Framework initialized
[ 0.008023] SELinux: Disabled at boot.
[ 0.008476] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013302] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014427] Mount-cache hash table entries: 256
[ 0.014532] Initializing cgroup subsys ns
[ 0.014534] Initializing cgroup subsys cpuacct
[ 0.014537] Initializing cgroup subsys devices
[ 0.014539] Initializing cgroup subsys freezer
[ 0.014541] Initializing cgroup subsys net_cls
[ 0.014557] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.014559] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.014561] CPU 0/0x0 -> Node 0
[ 0.014563] tseg: 00cfe00000
[ 0.014564] CPU: Physical Processor ID: 0
[ 0.014566] CPU: Processor Core ID: 0
[ 0.014568] mce: CPU supports 6 MCE banks
[ 0.014576] Performance Events: AMD PMU driver.
[ 0.014579] ... version: 0
[ 0.014580] ... bit width: 48
[ 0.014581] ... generic registers: 4
[ 0.014582] ... value mask: 0000ffffffffffff
[ 0.014583] ... max period: 00007fffffffffff
[ 0.014585] ... fixed-purpose events: 0
[ 0.014586] ... event mask: 000000000000000f
[ 0.015144] ACPI: Core revision 20090903
[ 0.024076] Setting APIC routing to flat
[ 0.024559] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065606] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 1/0x1 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.152056] CPU1: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.152062] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156050] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.012000] Initializing CPU#2
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 2/0x2 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 2
[ 0.244059] CPU2: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.244065] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.248015] Brought up 3 CPUs
[ 0.248017] Total of 3 processors activated (16875.98 BogoMIPS).
[ 0.249879] CPU0 attaching sched-domain:
[ 0.249883] domain 0: span 0-2 level MC
[ 0.249885] groups: group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0 cpus 1 group ffff880008c8fbf0 cpus 2
[ 0.249892] CPU1 attaching sched-domain:
[ 0.249893] domain 0: span 0-2 level MC
[ 0.249894] groups: group ffff880008c4fbf0 cpus 1 group ffff880008c8fbf0 cpus 2 group ffff880008c0fbf0 cpus 0
[ 0.249899] CPU2 attaching sched-domain:
[ 0.249901] domain 0: span 0-2 level MC
[ 0.249902] groups: group ffff880008c8fbf0 cpus 2 group ffff880008c0fbf0 cpus 0 group ffff880008c4fbf0 cpus 1
[ 0.249970] devtmpfs: initialized
[ 0.252708] regulator: core version 0.5
[ 0.252708] NET: Registered protocol family 16
[ 0.252708] node 0 link 0: io port [b000, ffff]
[ 0.252708] TOM: 00000000d0000000 aka 3328M
[ 0.252708] Fam 10h mmconf [e0000000, e00fffff]
[ 0.252708] node 0 link 0: mmio [a0000, bffff]
[ 0.252708] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.252708] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.252708] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
[ 0.252708] TOM2: 0000000230000000 aka 8960M
[ 0.252708] bus: [00,04] on node 0 link 0
[ 0.252708] bus: 00 index 0 io port: [0, ffff]
[ 0.252708] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.252708] bus: 00 index 2 mmio: [d0000000, dfffffff]
[ 0.252708] bus: 00 index 3 mmio: [e0500000, ffffffff]
[ 0.252708] bus: 00 index 4 mmio: [e0100000, e04fffff]
[ 0.252708] bus: 00 index 5 mmio: [230000000, fcffffffff]
[ 0.252708] ACPI: bus type pci registered
[ 0.252708] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.252708] PCI: MCFG area at e0000000 reserved in E820
[ 0.258206] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.258207] PCI: Using configuration type 1 for base access
[ 0.258500] bio: create slab <bio-0> at 0
[ 0.258500] ACPI: EC: Look up EC in DSDT
[ 0.266172] ACPI: Interpreter enabled
[ 0.266174] ACPI: (supports S0 S3 S4 S5)
[ 0.266191] ACPI: Using IOAPIC for interrupt routing
[ 0.270077] ACPI: No dock devices found.
[ 0.270165] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.270200] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.270240] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.270243] pci 0000:00:02.0: PME# disabled
[ 0.270270] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.270272] pci 0000:00:04.0: PME# disabled
[ 0.270303] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.270305] pci 0000:00:0a.0: PME# disabled
[ 0.270349] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
[ 0.270355] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.270361] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.270366] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.270372] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.270378] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
[ 0.270427] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
[ 0.270476] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.270541] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[ 0.270587] pci 0000:00:12.2: supports D1 D2
[ 0.270589] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.270592] pci 0000:00:12.2: PME# disabled
[ 0.270620] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.270669] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.270734] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
[ 0.270780] pci 0000:00:13.2: supports D1 D2
[ 0.270782] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.270785] pci 0000:00:13.2: PME# disabled
[ 0.270889] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.270895] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.270901] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.270907] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.270912] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f]
[ 0.271033] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff]
[ 0.271157] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.271167] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.271176] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.271182] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
[ 0.271188] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.276085] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
[ 0.276089] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.276092] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.276146] pci 0000:02:00.0: reg 10 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.276155] pci 0000:02:00.0: reg 14 32bit mmio: [0xfdf00000-0xfdf7ffff]
[ 0.276164] pci 0000:02:00.0: reg 18 io port: [0xdf00-0xdf1f]
[ 0.276172] pci 0000:02:00.0: reg 1c 32bit mmio: [0xfdffc000-0xfdffffff]
[ 0.276195] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.276240] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.276245] pci 0000:02:00.0: PME# disabled
[ 0.284101] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff]
[ 0.284105] pci 0000:00:04.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.284108] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.284143] pci 0000:03:00.0: reg 10 io port: [0xce00-0xceff]
[ 0.284156] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xfdaff000-0xfdafffff]
[ 0.284166] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xfdae0000-0xfdaeffff]
[ 0.284171] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.284200] pci 0000:03:00.0: supports D1 D2
[ 0.284201] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.284205] pci 0000:03:00.0: PME# disabled
[ 0.292083] pci 0000:00:0a.0: bridge io port: [0xc000-0xcfff]
[ 0.292086] pci 0000:00:0a.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.292089] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
[ 0.292140] pci 0000:04:06.0: reg 10 io port: [0xbf00-0xbf1f]
[ 0.292197] pci 0000:04:06.0: supports D1 D2
[ 0.292235] pci 0000:04:06.1: reg 10 io port: [0xbe00-0xbe07]
[ 0.292290] pci 0000:04:06.1: supports D1 D2
[ 0.292331] pci 0000:04:07.0: reg 10 io port: [0xbd00-0xbd07]
[ 0.292338] pci 0000:04:07.0: reg 14 io port: [0xbc00-0xbc07]
[ 0.292346] pci 0000:04:07.0: reg 18 io port: [0xbb00-0xbb07]
[ 0.292353] pci 0000:04:07.0: reg 1c io port: [0xba00-0xba07]
[ 0.292361] pci 0000:04:07.0: reg 20 io port: [0xb900-0xb907]
[ 0.292368] pci 0000:04:07.0: reg 24 io port: [0xb800-0xb80f]
[ 0.292433] pci 0000:04:0e.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff]
[ 0.292441] pci 0000:04:0e.0: reg 14 32bit mmio: [0xfdcf8000-0xfdcfbfff]
[ 0.292495] pci 0000:04:0e.0: supports D1 D2
[ 0.292496] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.292501] pci 0000:04:0e.0: PME# disabled
[ 0.292538] pci 0000:00:14.4: transparent bridge
[ 0.292541] pci 0000:00:14.4: bridge io port: [0xb000-0xbfff]
[ 0.292545] pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.292549] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.292567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.292788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.292852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.292892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.292939] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.310000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.310074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.310147] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.310217] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.310287] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.310357] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.310427] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.310497] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.310579] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.310583] vgaarb: loaded
[ 0.310602] PCI: Using ACPI for IRQ routing
[ 0.310602] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.310602] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.310602] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.310602] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.312023] Switching to clocksource tsc
[ 0.312722] pnp: PnP ACPI init
[ 0.312736] ACPI: bus type pnp registered
[ 0.315100] pnp 00:0d: mem resource (0xd5400-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.315103] pnp 00:0d: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.315106] pnp 00:0d: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.315108] pnp 00:0d: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.315111] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.315113] pnp 00:0d: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.315181] pnp: PnP ACPI: found 14 devices
[ 0.315183] ACPI: ACPI bus type pnp unregistered
[ 0.315190] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.315193] system 00:01: ioport range 0x220-0x225 has been reserved
[ 0.315195] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.315198] system 00:02: ioport range 0x4100-0x411f has been reserved
[ 0.315201] system 00:02: ioport range 0x228-0x22f has been reserved
[ 0.315203] system 00:02: ioport range 0x238-0x23f has been reserved
[ 0.315205] system 00:02: ioport range 0x40b-0x40b has been reserved
[ 0.315207] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 0.315209] system 00:02: ioport range 0xc00-0xc01 has been reserved
[ 0.315211] system 00:02: ioport range 0xc14-0xc14 has been reserved
[ 0.315213] system 00:02: ioport range 0xc50-0xc52 has been reserved
[ 0.315215] system 00:02: ioport range 0xc6c-0xc6d has been reserved
[ 0.315217] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[ 0.315219] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[ 0.315221] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[ 0.315223] system 00:02: ioport range 0xcd4-0xcdf has been reserved
[ 0.315225] system 00:02: ioport range 0x4000-0x40fe has been reserved
[ 0.315227] system 00:02: ioport range 0x4210-0x4217 has been reserved
[ 0.315229] system 00:02: ioport range 0xb00-0xb0f has been reserved
[ 0.315231] system 00:02: ioport range 0xb10-0xb1f has been reserved
[ 0.315233] system 00:02: ioport range 0xb20-0xb3f has been reserved
[ 0.315239] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.315242] system 00:0d: iomem range 0xcfde0000-0xcfdeffff could not be reserved
[ 0.315245] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.315247] system 00:0d: iomem range 0xcfdf0000-0xcfdfffff has been reserved
[ 0.315249] system 00:0d: iomem range 0xcfe00000-0xcfefffff could not be reserved
[ 0.315252] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.315254] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.315256] system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.319948] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.319951] pci 0000:00:02.0: IO window: 0xe000-0xefff
[ 0.319953] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff
[ 0.319956] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.319959] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.319961] pci 0000:00:04.0: IO window: 0xd000-0xdfff
[ 0.319964] pci 0000:00:04.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.319966] pci 0000:00:04.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.319969] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03
[ 0.319971] pci 0000:00:0a.0: IO window: 0xc000-0xcfff
[ 0.319973] pci 0000:00:0a.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.319975] pci 0000:00:0a.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.319978] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
[ 0.319981] pci 0000:00:14.4: IO window: 0xb000-0xbfff
[ 0.319985] pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff
[ 0.319989] pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff
[ 0.319999] alloc irq_desc for 18 on node 0
[ 0.320001] alloc kstat_irqs on node 0
[ 0.320010] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.320012] pci 0000:00:02.0: setting latency timer to 64
[ 0.320016] alloc irq_desc for 16 on node 0
[ 0.320017] alloc kstat_irqs on node 0
[ 0.320023] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.320025] pci 0000:00:04.0: setting latency timer to 64
[ 0.320029] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.320031] pci 0000:00:0a.0: setting latency timer to 64
[ 0.320038] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.320039] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.320041] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.320043] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.320045] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.320046] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.320048] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.320050] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff]
[ 0.320051] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.320053] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.320054] pci_bus 0000:03: resource 2 pref mem [0xfda00000-0xfdafffff]
[ 0.320056] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.320058] pci_bus 0000:04: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.320059] pci_bus 0000:04: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.320061] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.320062] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.320085] NET: Registered protocol family 2
[ 0.320258] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.321192] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.323485] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.323788] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.323790] TCP reno registered
[ 0.323879] NET: Registered protocol family 1
[ 0.443121] pci 0000:01:00.0: Boot video device
[ 0.443175] Unpacking initramfs...
[ 0.492359] Freeing initrd memory: 3433k freed
[ 0.494115] PCI-DMA: Disabling AGP.
[ 0.494187] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.494188] PCI-DMA: using GART IOMMU.
[ 0.494190] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.496165] audit: initializing netlink socket (disabled)
[ 0.496173] type=2000 audit(1334403496.495:1): initialized
[ 0.498642] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.499543] VFS: Disk quotas dquot_6.5.2
[ 0.499578] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.499630] msgmni has been set to 16005
[ 0.499796] alg: No test for stdrng (krng)
[ 0.499861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.499864] io scheduler noop registered
[ 0.499865] io scheduler anticipatory registered
[ 0.499866] io scheduler deadline registered
[ 0.499904] io scheduler cfq registered (default)
[ 0.500000] alloc irq_desc for 24 on node 0
[ 0.500001] alloc kstat_irqs on node 0
[ 0.500008] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.500012] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.500090] alloc irq_desc for 25 on node 0
[ 0.500091] alloc kstat_irqs on node 0
[ 0.500095] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X
[ 0.500098] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.500171] alloc irq_desc for 26 on node 0
[ 0.500172] alloc kstat_irqs on node 0
[ 0.500177] pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X
[ 0.500180] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.500410] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011800000, using 6912k, total 6912k
[ 0.500412] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
[ 0.500413] vesafb: scrolling: redraw
[ 0.500415] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.522298] Console: switching to colour frame buffer device 210x65
[ 0.543933] fb0: VESA VGA frame buffer device
[ 0.544801] Linux agpgart interface v0.103
[ 0.544832] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.544931] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.545162] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.545262] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.545295] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.545296] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.545418] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.545471] mice: PS/2 mouse device common for all mice
[ 0.545509] rtc_cmos 00:05: RTC can wake from S4
[ 0.545532] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.545563] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.545570] cpuidle: using governor ladder
[ 0.545571] cpuidle: using governor menu
[ 0.545575] No iBFT detected.
[ 0.545800] TCP cubic registered
[ 0.545873] NET: Registered protocol family 10
[ 0.546401] Mobile IPv6
[ 0.546403] NET: Registered protocol family 17
[ 0.546456] PM: Resume from disk failed.
[ 0.546463] registered taskstats version 1
[ 0.546829] rtc_cmos 00:05: setting system clock to 2012-04-14 11:38:16 UTC (1334403496)
[ 0.546860] Initalizing network drop monitor service
[ 0.546881] Freeing unused kernel memory: 592k freed
[ 0.546993] Write protecting the kernel read-only data: 4244k
[ 0.562461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.648464] udev[101]: starting version 164
[ 0.694737] SCSI subsystem initialized
[ 0.704091] libata version 3.00 loaded.
[ 0.706327] ahci 0000:00:11.0: version 3.0
[ 0.706343] alloc irq_desc for 22 on node 0
[ 0.706345] alloc kstat_irqs on node 0
[ 0.706355] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.706480] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.706483] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.706790] scsi0 : ahci
[ 0.706872] scsi1 : ahci
[ 0.706910] scsi2 : ahci
[ 0.706947] scsi3 : ahci
[ 0.706988] scsi4 : ahci
[ 0.707025] scsi5 : ahci
[ 0.707137] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
[ 0.707140] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 0.707143] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 0.707146] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 0.707149] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 0.707152] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 1.027116] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.027142] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.027200] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.152034] ata3: softreset failed (device not ready)
[ 1.152037] ata2: softreset failed (device not ready)
[ 1.152040] ata2: applying SB600 PMP SRST workaround and retrying
[ 1.152228] ata3: applying SB600 PMP SRST workaround and retrying
[ 1.316043] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.316046] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.316799] ata2.00: ATA-8: WDC WD6400AACS-00D6B1, 01.01A01, max UDMA/133
[ 1.316802] ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.317647] ata2.00: configured for UDMA/133
[ 1.317960] ata3.00: ATA-7: SAMSUNG SP1213C, SV100-34, max UDMA7
[ 1.317962] ata3.00: 234493056 sectors, multi 0: LBA48
[ 1.319947] ata3.00: configured for UDMA/133
[ 1.564021] ata1: softreset failed (device not ready)
[ 1.564121] ata1: applying SB600 PMP SRST workaround and retrying
[ 1.728029] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.739339] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
[ 1.739342] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.749733] ata1.00: configured for UDMA/133
[ 1.764142] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5
[ 1.764300] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AACS-0 01.0 PQ: 0 ANSI: 5
[ 1.764428] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1213C SV10 PQ: 0 ANSI: 5
[ 1.768039] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.768073] sd 0:0:0:0: [sda] Write Protect is off
[ 1.768075] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.768090] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.768179] sda:
[ 1.768277] sd 2:0:0:0: [sdc] 234493056 512-byte logical blocks: (120 GB/111 GiB)
[ 1.768307] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.768309] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.768329] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.768358] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.768389] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.768391] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.768404] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.768523] sdc:
[ 1.768552] sdb: sda1 sda2 sda3 sda4 sda5
[ 1.769669] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.774594] sdc1 sdc2
[ 1.774906] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.780401] sdb1 sdb2
[ 1.780564] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.953971] device-mapper: uevent: version 1.0.3
[ 1.954092] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.961874] md: raid1 personality registered for level 1
[ 1.981545] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 2.108765] <30>udevd[458]: starting version 175
[ 2.143021] processor LNXCPU:00: registered as cooling_device0
[ 2.143058] processor LNXCPU:01: registered as cooling_device1
[ 2.143088] processor LNXCPU:02: registered as cooling_device2
[ 2.154165] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.154171] ACPI: Power Button [PWRB]
[ 2.154228] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.154230] ACPI: Power Button [PWRF]
[ 2.156432] ACPI: WMI: Mapper loaded
[ 2.163614] Floppy drive(s): fd0 is 1.44M
[ 2.184356] FDC 0 is a post-1991 82077
[ 2.189970] parport_pc 00:0a: reported by Plug and Play ACPI
[ 2.190022] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 2.191711] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 2.191889] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.192929] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.192947] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.192996] r8169 0000:03:00.0: setting latency timer to 64
[ 2.193026] alloc irq_desc for 27 on node 0
[ 2.193027] alloc kstat_irqs on node 0
[ 2.193038] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 2.193453] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xffffc90000c7e000, 00:24:1d:22:d0:18, XID 1c4000c0 IRQ 27
[ 2.194398] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 2.194400] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.195965] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.195992] e1000e 0000:02:00.0: setting latency timer to 64
[ 2.196178] alloc irq_desc for 28 on node 0
[ 2.196180] alloc kstat_irqs on node 0
[ 2.196184] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 2.196185] alloc irq_desc for 29 on node 0
[ 2.196186] alloc kstat_irqs on node 0
[ 2.196188] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 2.196190] alloc irq_desc for 30 on node 0
[ 2.196191] alloc kstat_irqs on node 0
[ 2.196193] e1000e 0000:02:00.0: irq 30 for MSI/MSI-X
[ 2.196357] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 2.206788] usbcore: registered new interface driver usbfs
[ 2.206806] usbcore: registered new interface driver hub
[ 2.206828] usbcore: registered new device driver usb
[ 2.210067] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.210522] scsi6 : pata_atiixp
[ 2.210749] scsi7 : pata_atiixp
[ 2.211511] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.211557] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.211559] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.287800] nvidia: module license 'NVIDIA' taints kernel.
[ 2.287804] Disabling lock debugging due to kernel taint
[ 2.307356] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:c2:85:c8
[ 2.307358] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 2.307370] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-006
[ 2.380742] ata7.00: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
[ 2.380762] ata7.01: ATAPI: Optiarc DVD RW AD-7203A, 1.06, max UDMA/66
[ 2.396700] ata7.00: configured for UDMA/66
[ 2.412688] ata7.01: configured for UDMA/66
[ 2.414500] scsi 6:0:0:0: CD-ROM Optiarc DVD RW AD-7170A 1.02 PQ: 0 ANSI: 5
[ 2.416234] scsi 6:0:1:0: CD-ROM Optiarc DVD RW AD-7203A 1.06 PQ: 0 ANSI: 5
[ 2.560768] EDAC MC: Ver: 2.1.0 Mar 22 2012
[ 2.561536] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 2.563790] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.563988] alloc irq_desc for 17 on node 0
[ 2.563990] alloc kstat_irqs on node 0
[ 2.564007] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.564040] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.564060] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.564081] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 2.564092] ehci_hcd 0000:00:12.2: debug port 1
[ 2.564118] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 2.564897] alloc irq_desc for 21 on node 0
[ 2.564899] alloc kstat_irqs on node 0
[ 2.564907] parport_serial 0000:04:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.564935] parport1: PC-style at 0xbb00 [PCSPP,TRISTATE,EPP]
[ 2.567045] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.574749] EDAC amd64_edac: Ver: 3.2.0 Mar 22 2012
[ 2.576123] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.576141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.576143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.576145] usb usb1: Product: EHCI Host Controller
[ 2.576146] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 2.576148] usb usb1: SerialNumber: 0000:00:12.2
[ 2.576209] usb usb1: configuration #1 chosen from 1 choice
[ 2.576231] hub 1-0:1.0: USB hub found
[ 2.576236] hub 1-0:1.0: 6 ports detected
[ 2.577720] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.577749] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.577761] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[ 2.577797] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 2.636024] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.636026] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.636028] usb usb2: Product: OHCI Host Controller
[ 2.636030] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.636031] usb usb2: SerialNumber: 0000:00:12.0
[ 2.636096] usb usb2: configuration #1 chosen from 1 choice
[ 2.636117] hub 2-0:1.0: USB hub found
[ 2.636126] hub 2-0:1.0: 3 ports detected
[ 2.636997] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 2.637005] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 2.637006] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 2.637007] (Note that use of the override may cause unknown side effects.)
[ 2.637021] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 2.637063] alloc irq_desc for 19 on node 0
[ 2.637064] alloc kstat_irqs on node 0
[ 2.637074] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.637104] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.637195] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 2.637247] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 2.637259] ehci_hcd 0000:00:13.2: debug port 1
[ 2.637284] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 2.648023] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.648043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.648045] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.648047] usb usb3: Product: EHCI Host Controller
[ 2.648049] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 2.648050] usb usb3: SerialNumber: 0000:00:13.2
[ 2.648097] usb usb3: configuration #1 chosen from 1 choice
[ 2.648117] hub 3-0:1.0: USB hub found
[ 2.648122] hub 3-0:1.0: 6 ports detected
[ 2.649108] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.649128] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.649137] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.649157] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 2.656918] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.656920] Uniform CD-ROM driver Revision: 3.20
[ 2.656988] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.660198] 0000:04:07.0: ttyS1 at I/O 0xbd00 (irq = 21) is a 16550A
[ 2.660328] 0000:04:07.0: ttyS2 at I/O 0xbc00 (irq = 21) is a 16550A
[ 2.660607] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.661976] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.662041] sr 6:0:1:0: Attached scsi CD-ROM sr1
[ 2.708009] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.708011] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.708013] usb usb4: Product: OHCI Host Controller
[ 2.708014] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.708016] usb usb4: SerialNumber: 0000:00:12.1
[ 2.708068] usb usb4: configuration #1 chosen from 1 choice
[ 2.708087] hub 4-0:1.0: USB hub found
[ 2.708095] hub 4-0:1.0: 3 ports detected
[ 2.708929] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.708952] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.708963] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.708996] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 2.732021] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI version 1.10
[ 2.748351] gameport: EMU10K1 is pci0000:04:06.1/gameport0, io 0xbe00, speed 651kHz
[ 2.748368] alloc irq_desc for 20 on node 0
[ 2.748370] alloc kstat_irqs on node 0
[ 2.748379] EMU10K1_Audigy 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.768017] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.768019] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.768021] usb usb5: Product: OHCI Host Controller
[ 2.768022] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.768023] usb usb5: SerialNumber: 0000:00:13.0
[ 2.768082] usb usb5: configuration #1 chosen from 1 choice
[ 2.768100] hub 5-0:1.0: USB hub found
[ 2.768107] hub 5-0:1.0: 3 ports detected
[ 2.770512] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.770532] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.770541] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.770558] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 2.805299] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.805306] nvidia 0000:01:00.0: setting latency timer to 64
[ 2.805309] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.805432] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010
[ 2.828025] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.828027] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.828029] usb usb6: Product: OHCI Host Controller
[ 2.828030] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.828032] usb usb6: SerialNumber: 0000:00:13.1
[ 2.828092] usb usb6: configuration #1 chosen from 1 choice
[ 2.828112] hub 6-0:1.0: USB hub found
[ 2.828121] hub 6-0:1.0: 3 ports detected
[ 2.828204] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.828226] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.828235] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.828255] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 2.888028] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 2.888045] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.888047] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.888049] usb usb7: Product: OHCI Host Controller
[ 2.888050] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.888051] usb usb7: SerialNumber: 0000:00:14.5
[ 2.888100] usb usb7: configuration #1 chosen from 1 choice
[ 2.888121] hub 7-0:1.0: USB hub found
[ 2.888128] hub 7-0:1.0: 2 ports detected
[ 3.031179] usb 1-4: New USB device found, idVendor=1871, idProduct=0101
[ 3.031182] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.031184] usb 1-4: Product: USB2.0 Camera
[ 3.031185] usb 1-4: Manufacturer: AVEO Technology Corp.
[ 3.031253] usb 1-4: configuration #1 chosen from 1 choice
[ 3.044316] Linux video capture interface: v2.00
[ 3.046686] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101)
[ 3.048373] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input5
[ 3.048408] usbcore: registered new interface driver uvcvideo
[ 3.048410] USB Video Class driver (v0.1.0)
[ 3.088144] fsck.ext4: sending ioctl 127c to a partition!
[ 3.088147] fsck.ext4: sending ioctl 127c to a partition!
[ 3.144031] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 3.232580] firewire_core: created device fw0: GUID 00ed6b7000001fd0, S400
[ 3.279093] usb 3-1: New USB device found, idVendor=058f, idProduct=6362
[ 3.279096] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.279098] usb 3-1: Product: Mass Storage Device
[ 3.279099] usb 3-1: Manufacturer: Generic
[ 3.279101] usb 3-1: SerialNumber: 058F63626376
[ 3.279170] usb 3-1: configuration #1 chosen from 1 choice
[ 3.293231] Initializing USB Mass Storage driver...
[ 3.293329] scsi8 : SCSI emulation for USB Mass Storage devices
[ 3.293409] usb-storage: device found at 2
[ 3.293411] usb-storage: waiting for device to settle before scanning
[ 3.293419] usbcore: registered new interface driver usb-storage
[ 3.293421] USB Mass Storage support registered.
[ 3.652024] usb 6-3: new full speed USB device using ohci_hcd and address 2
[ 3.885275] usb 6-3: New USB device found, idVendor=09da, idProduct=8090
[ 3.885278] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.885280] usb 6-3: Product: USB Full Speed
[ 3.885281] usb 6-3: Manufacturer: A4Tech
[ 3.885350] usb 6-3: configuration #1 chosen from 1 choice
[ 3.902879] usbcore: registered new interface driver hiddev
[ 3.925429] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input6
[ 3.925498] generic-usb 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:13.1-3/input0
[ 3.963546] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/input/input7
[ 3.963633] generic-usb 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:13.1-3/input1
[ 3.963653] usbcore: registered new interface driver usbhid
[ 3.963655] usbhid: v2.6:USB HID core driver
[ 8.296222] usb-storage: device scan complete
[ 8.296703] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 8.297195] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 8.297699] scsi 8:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[ 8.298198] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 8.300947] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 8.303571] sd 8:0:0:1: [sde] Attached SCSI removable disk
[ 8.305697] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[ 8.306319] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[ 10.528136] loop: module loaded
[ 10.534647] it87: Found IT8720F chip at 0x228, revision 5
[ 10.534662] it87: Routing internal VCCH to in7
[ 10.534663] it87: in3 is VCC (+5V)
[ 10.534664] it87: in7 is VCCH (+5V Stand-By)
[ 10.550789] RPC: Registered udp transport module.
[ 10.550791] RPC: Registered tcp transport module.
[ 10.550792] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.556730] Slow work thread pool: Starting up
[ 10.556789] Slow work thread pool: Ready
[ 10.556833] FS-Cache: Loaded
[ 10.568759] FS-Cache: Netfs 'nfs' registered for caching
[ 10.575572] ppdev: user-space parallel port driver
[ 10.577847] lp0: using parport0 (interrupt-driven).
[ 10.577883] lp1: using parport1 (polling).
[ 12.121448] fsck.ext2: sending ioctl 127c to a partition!
[ 12.121451] fsck.ext2: sending ioctl 127c to a partition!
[ 12.124166] fsck.ext4: sending ioctl 127c to a partition!
[ 12.124169] fsck.ext4: sending ioctl 127c to a partition!
[ 12.127494] fsck.ext4: sending ioctl 127c to a partition!
[ 12.127496] fsck.ext4: sending ioctl 127c to a partition!
[ 12.131029] fsck.ext4: sending ioctl 127c to a partition!
[ 12.193377] fsck.ext4: sending ioctl 127c to a partition!
[ 12.285382] fsck.ext4: sending ioctl 127c to a partition!
[ 13.180724] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 13.187950] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 13.596827] EXT4-fs (dm-4): mounted filesystem with ordered data mode
[ 14.094127] EXT4-fs (dm-5): mounted filesystem with ordered data mode
[ 14.468792] EXT4-fs (dm-6): mounted filesystem with ordered data mode
[ 14.578925] r8169 0000:03:00.0: eth0: link down
[ 14.579734] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.673169] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.824989] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 17.825946] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 19.921672] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.101616] fuse init (API version 7.13)
[ 23.861380] vboxdrv: Found 3 processor cores.
[ 23.861434] VBoxDrv: dbg - g_abExecMemory=ffffffffa0eee7a0
[ 23.861462] vboxdrv: fAsync=0 offMin=0x355 offMax=0x1bdd
[ 23.861496] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 23.861498] vboxdrv: Successfully loaded version 3.2.14 (interface 0x00140001).
[ 25.103536] fsck.ext4: sending ioctl 127c to a partition!
[ 25.103539] fsck.ext4: sending ioctl 127c to a partition!
[ 25.146726] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[ 27.752576] EXT4-fs (dm-8): mounted filesystem with ordered data mode
[ 28.756035] eth1: no IPv6 routers present
Module Size Used by
usb_storage 40233 0
ohci_hcd 19375 0
ehci_hcd 32145 0
usbcore 123186 4 ehci_hcd,ohci_hcd,usb_storage
nls_base 6377 1 usbcore
raid1 18431 0
md_mod 73936 1 raid1
dm_crypt 10680 0
dm_mod 53994 1 dm_crypt
aes_x86_64 7340 0
aes_generic 25714 1 aes_x86_64
sha256_generic 8692 0
ext4 288510 1
ext2 52937 0
jbd2 67143 1 ext4
mbcache 5050 2 ext2,ext4
crc16 1319 1 ext4
sd_mod 29953 2
crc_t10dif 1276 1 sd_mod
ahci 32886 1
libata 133824 1 ahci
scsi_mod 126789 3 libata,sd_mod,usb_storage
thermal 11674 0
thermal_sys 11942 1 thermal
Reply to: