--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-2-openvz-686: OpenVZ: can't use ipt_connlimit in VZ
- From: Markus Wawersich <wawersich@www-pool.de>
- Date: Wed, 29 Apr 2009 10:01:32 +0200
- Message-id: <20090429080132.5891.38967.reportbug@Debian-40-etch-32-minimal>
Package: linux-image-2.6.26-2-openvz-686
Version: 2.6.26-15
Severity: normal
I don't know if this is a Bug.
I can't use the xt_connlimit module in a VZ (OpenVZ environment).
# vzctl set 123456 --iptables ipt_connlimit --save
Warning: Unknown iptable module: ipt_connlimit, skipped
Warning: Unknown iptable module: ipt_connlimit, skipped
Bad parameter for --iptables: ipt_connlimit
# grep connlimit /etc/* -r
/etc/modules:ipt_connlimit
/etc/vz/vz.conf:IPTABLES="ipt_REJECT ipt_tos ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_connlimit"
please help
tank you
-- Package-specific info:
** Version:
Linux version 2.6.26-2-openvz-686 (Debian 2.6.26-15) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26 03:55:11 UTC 2009
** Command line:
auto BOOT_IMAGE=VZ-Lenny ro root=902
** Not tainted
** Kernel log:
[ 7.627968] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.683212] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.700575] usb usb2: Product: OHCI Host Controller
[ 7.720332] usb usb2: Manufacturer: Linux 2.6.26-2-openvz-686 ohci_hcd
[ 7.735835] usb usb2: SerialNumber: 0000:00:13.1
[ 7.755866] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 7.771877] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 7.789834] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 7.808866] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe7fc000
[ 7.895313] usb usb3: configuration #1 chosen from 1 choice
[ 7.915324] hub 3-0:1.0: USB hub found
[ 7.932765] hub 3-0:1.0: 2 ports detected
[ 8.050856] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.074008] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.091065] usb usb3: Product: OHCI Host Controller
[ 8.108153] usb usb3: Manufacturer: Linux 2.6.26-2-openvz-686 ohci_hcd
[ 8.125222] usb usb3: SerialNumber: 0000:00:13.2
[ 8.142280] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 8.159093] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 8.176103] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 8.193293] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe7fb000
[ 8.282110] usb usb4: configuration #1 chosen from 1 choice
[ 8.314126] hub 4-0:1.0: USB hub found
[ 8.331183] hub 4-0:1.0: 2 ports detected
[ 8.462072] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.478947] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.494952] usb usb4: Product: OHCI Host Controller
[ 8.511060] usb usb4: Manufacturer: Linux 2.6.26-2-openvz-686 ohci_hcd
[ 8.527120] usb usb4: SerialNumber: 0000:00:13.3
[ 8.558946] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
[ 8.567185] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 8.583032] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 8.599246] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe7fa000
[ 8.686112] usb usb5: configuration #1 chosen from 1 choice
[ 8.702544] hub 5-0:1.0: USB hub found
[ 8.719070] hub 5-0:1.0: 2 ports detected
[ 8.846258] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.862379] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.878481] usb usb5: Product: OHCI Host Controller
[ 8.897161] usb usb5: Manufacturer: Linux 2.6.26-2-openvz-686 ohci_hcd
[ 8.913247] usb usb5: SerialNumber: 0000:00:13.4
[ 8.929498] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
[ 8.945555] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 8.961603] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 8.977825] ehci_hcd 0000:00:13.5: debug port 1
[ 8.995131] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe7ff000
[ 9.022350] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 9.038380] usb usb6: configuration #1 chosen from 1 choice
[ 9.054499] hub 6-0:1.0: USB hub found
[ 9.070710] hub 6-0:1.0: 10 ports detected
[ 9.191234] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.207273] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.226235] usb usb6: Product: EHCI Host Controller
[ 9.243343] usb usb6: Manufacturer: Linux 2.6.26-2-openvz-686 ehci_hcd
[ 9.259222] usb usb6: SerialNumber: 0000:00:13.5
[ 9.415904] md: md1 stopped.
[ 9.472465] md: bind<sdb1>
[ 9.506098] md: bind<sda1>
[ 9.545431] raid1: raid set md1 active with 2 out of 2 mirrors
[ 9.580031] md: md2 stopped.
[ 9.624469] md: bind<sdb2>
[ 9.652808] md: bind<sda2>
[ 9.679980] raid1: raid set md2 active with 2 out of 2 mirrors
[ 9.846267] PM: Starting manual resume from disk
[ 9.908018] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 9.923980] EXT3-fs: write access will be enabled during recovery.
[ 18.577345] kjournald starting. Commit interval 5 seconds
[ 18.592598] EXT3-fs: recovery complete.
[ 18.815082] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.593285] udevd version 125 started
[ 21.050487] Linux agpgart interface v0.103
[ 21.098288] input: Power Button (FF) as /class/input/input1
[ 21.144168] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.193190] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.225590] ACPI: Power Button (FF) [PWRF]
[ 21.245255] input: Power Button (CM) as /class/input/input2
[ 21.309788] ACPI: Power Button (CM) [PWRB]
[ 21.408359] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 21.498300] ACPI: PCI Interrupt 0000:01:05.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 21.557353] input: PC Speaker as /class/input/input3
[ 22.532550] Swap area shorter than signature indicates
[ 22.614051] EXT3 FS on md2, internal journal
[ 22.840437] loop: module loaded
[ 22.940664] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 23.006091] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.255992] device-mapper: uevent: version 1.0.3
[ 23.273470] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 23.788582] Swap area shorter than signature indicates
[ 24.286060] r8169: eth0: link up
[ 24.303965] r8169: eth0: link up
[ 24.805905] NET: Registered protocol family 10
[ 28.256635] Clocksource tsc unstable (delta = -142666606 ns)
[ 32.550835] tun: Universal TUN/TAP device driver, 1.6
[ 32.585884] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 33.308164] warning: `vzctl' uses 32-bit capabilities (legacy support in use)
[ 33.349828] CT: 106: started
[ 34.353273] CT: 108: started
[ 35.378435] CT: 109: started
[ 35.808921] eth0: no IPv6 routers present
[ 36.683884] CT: 123456: started
** Loaded modules:
Module Size Used by
vzethdev 9184 0
vznetdev 14532 7
simfs 4756 4
vzrst 116532 0
vzcpt 97924 0
tun 10148 2 vzrst,vzcpt
vzdquota 32732 4 [permanent]
vzmon 23112 8 vzethdev,vznetdev,vzrst,vzcpt
vzdev 3624 4 vzethdev,vznetdev,vzdquota,vzmon
xt_tcpudp 3584 0
xt_length 2528 0
ipt_ttl 2368 0
xt_tcpmss 2752 0
xt_TCPMSS 4448 0
iptable_mangle 4640 0
xt_multiport 3584 0
xt_limit 2948 0
xt_dscp 3136 0
ipt_REJECT 3552 0
cpufreq_conservative 6728 0
cpufreq_userspace 4420 0
cpufreq_stats 4640 0
cpufreq_ondemand 7244 1
cpufreq_powersave 2624 0
ipv6 242176 75 vzrst,vzcpt,vzmon
dm_snapshot 15108 0
dm_mirror 15872 0
dm_log 9252 1 dm_mirror
dm_mod 46984 3 dm_snapshot,dm_mirror,dm_log
xt_connlimit 4488 0
nf_conntrack_ipv4 17232 4
nf_conntrack_ftp 7684 0
iptable_filter 4288 0
ip_tables 11056 2 iptable_mangle,iptable_filter
ipt_LOG 5956 0
xt_state 2784 0
nf_conntrack 65512 4 xt_connlimit,nf_conntrack_ipv4,nf_conntrack_ftp,xt_state
x_tables 14404 13 xt_tcpudp,xt_length,ipt_ttl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,xt_connlimit,ip_tables,ipt_LOG,xt_state
loop 13548 0
pcspkr 3200 0
k8temp 4832 0
snd_hda_intel 326552 0
snd_pcm 63428 1 snd_hda_intel
snd_timer 18568 1 snd_pcm
snd 46404 3 snd_hda_intel,snd_pcm,snd_timer
soundcore 7136 1 snd
i2c_piix4 8016 0
snd_page_alloc 8648 2 snd_hda_intel,snd_pcm
i2c_core 20596 1 i2c_piix4
shpchp 26360 0
ati_agp 6988 0
pci_hotplug 24260 1 shpchp
button 6864 0
agpgart 29576 1 ati_agp
evdev 8736 0
ehci_hcd 29388 0
ohci_hcd 19428 0
r8169 24612 0
usbcore 119312 3 ehci_hcd,ohci_hcd
sd_mod 22968 6
thermal 15996 0
fan 4932 0
powernow_k8 12804 1
freq_table 5088 3 cpufreq_stats,cpufreq_ondemand,powernow_k8
processor 33536 2 thermal,powernow_k8
thermal_sys 11624 3 thermal,fan,processor
raid1 18688 2
raid0 7136 0
md_mod 67836 3 raid1,raid0
atiixp 4164 0 [permanent]
ahci 24428 4
sata_nv 20040 0
sata_sil 7944 0
sata_via 7876 0
libata 141344 4 ahci,sata_nv,sata_sil,sata_via
dock 9072 1 libata
via82cxxx 7716 0 [permanent]
ide_core 97000 2 atiixp,via82cxxx
3w_9xxx 26916 0
3w_xxxx 22144 0
scsi_mod 130220 4 sd_mod,libata,3w_9xxx,3w_xxxx
xfs 458552 0
ext3 106184 1
jbd 40244 1 ext3
ext2 55336 0
mbcache 7876 2 ext3,ext2
reiserfs 191072 0
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Kernel modules: ati-agp
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe9fffff
Prefetchable memory behind bridge: 00000000fc000000-00000000fdffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 6, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0300c Data: 41a9
Capabilities: [b0] Subsystem: ATI Technologies Inc RS690 PCI to PCI Bridge [1002:7910]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7327]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 7000 [size=16]
Region 5: Memory at fe7ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe7fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7fa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe7ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon X1200 Series] [1002:791e] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7327]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fc000000 (64-bit, prefetchable) [size=32M]
Region 2: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at c000 [size=256]
Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
01:05.2 Audio device [0403]: ATI Technologies Inc Radeon X1200 Series Audio Controller [1002:7919]
Subsystem: ATI Technologies Inc Radeon X1200 Series Audio Controller [1002:7919]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:368c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 222
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data <?>
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 41c9
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [12c] Virtual Channel <?>
Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-00-6e
Capabilities: [154] Power Budgeting <?>
Kernel driver in use: r8169
Kernel modules: r8169
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-openvz-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-openvz-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
ii vzctl 3.0.22-14 server virtualization solution - c
Versions of packages linux-image-2.6.26-2-openvz-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-openvz-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
ii lilo 1:22.8-7 LInux LOader - The Classic OS load
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-openvz-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-openvz-686/preinst/overwriting-modules-2.6.26-2-openvz-686: true
linux-image-2.6.26-2-openvz-686/preinst/abort-overwrite-2.6.26-2-openvz-686:
linux-image-2.6.26-2-openvz-686/preinst/failed-to-move-modules-2.6.26-2-openvz-686:
linux-image-2.6.26-2-openvz-686/preinst/initrd-2.6.26-2-openvz-686:
linux-image-2.6.26-2-openvz-686/prerm/removing-running-kernel-2.6.26-2-openvz-686: true
linux-image-2.6.26-2-openvz-686/postinst/bootloader-test-error-2.6.26-2-openvz-686:
linux-image-2.6.26-2-openvz-686/prerm/would-invalidate-boot-loader-2.6.26-2-openvz-686: true
linux-image-2.6.26-2-openvz-686/postinst/old-system-map-link-2.6.26-2-openvz-686: true
linux-image-2.6.26-2-openvz-686/preinst/elilo-initrd-2.6.26-2-openvz-686: true
linux-image-2.6.26-2-openvz-686/postinst/old-initrd-link-2.6.26-2-openvz-686: true
linux-image-2.6.26-2-openvz-686/postinst/create-kimage-link-2.6.26-2-openvz-686: true
linux-image-2.6.26-2-openvz-686/postinst/depmod-error-2.6.26-2-openvz-686: false
linux-image-2.6.26-2-openvz-686/postinst/old-dir-initrd-link-2.6.26-2-openvz-686: true
linux-image-2.6.26-2-openvz-686/preinst/abort-install-2.6.26-2-openvz-686:
linux-image-2.6.26-2-openvz-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-openvz-686/preinst/lilo-initrd-2.6.26-2-openvz-686: true
linux-image-2.6.26-2-openvz-686/postinst/bootloader-error-2.6.26-2-openvz-686:
linux-image-2.6.26-2-openvz-686/postinst/depmod-error-initrd-2.6.26-2-openvz-686: false
linux-image-2.6.26-2-openvz-686/preinst/bootloader-initrd-2.6.26-2-openvz-686: true
--- End Message ---